Date format problem after Upgrade in BI

Hi Gurus,
We have just completed our upgrade of BI System to EHP1.
My users are facing a very typical problem.
Before the upgarde they could enter date while running a report in the following format:
20100215 in date variable (No slashes or dotd.)
After the upgrade they are forced to enter 2010/02/15.
If they don't enter slashes system does not accept that.
Any idea if we can rectify that somehow.
Regards

Checked in there alreday. Problem does not arise from there it seems.
I hope I am clear enough abt the problem.
Users are forced to type "/" between year month and day. Prior to Upgrade they did not need to type "/" between year month and day.
Edited by: Shalini Arya on Mar 17, 2010 2:45 PM

Similar Messages

  • Formatting problems , after upgrading to 8.1.7 client

    Hi all
    Recently I upgraded my client to 8.1.7.
    Immedietly after that, one of my reports(Report Builder 6.0.8.12.1) which was printing fine, starting having more space between words , and that too only on the last page of the report.
    Kindly share any similar experiences or solutions.
    Thanks

    Yeah, its true that most of the objects where not in valid form. I tried to recompile them all, but still few were left invalid.
    And the problem still persists. I even tried to restart the iAS. And one more thing, Oracle 8.1.7 install its own Apache and does also make changes into Registry settings. Can this be the reason for the problem?
    Now I think the only option left is to uninstall portal and also the login server and reinstall it. Is there any other way out....
    If we go for uninstalling, then can I take backup of all my portlets and can restore it back after reinstalling Oracle portal. Apart from normal import/export process, which is bit complicated, is there some other way to do this task?
    Any new ideas are appreciated..

  • Wi-fi and data signal problems after upgrade to ios 8.0.2

    Hi all,
    I have an iphone 6 and updated to ios 8.0.2 two days ago (skipping the ill-fated ios 8.0.1). However, since the update my wi-fi signal is even worse and keeps dropping out, as does me 3G/4G signal.
    Is anyone else having this problem? Should I (can I?) roll back to ios 8?
    Thanks!

    You are not alone.
    As stated by gdgmacguy you may need to do a full reset/restore, but this may be overkill. Before putting your iPhone back to factory defaults, you should try doing a full power down cycle (press and hold the power button, slide the off switch on screen). Wait a few seconds before powering back up. Put your password in to unlock the iPhone and wait to see if your wifi/cellular signal improves. If this does not work, then you need to see if there is something else messing with the handset. The way to do this is to backup all your stuff first and then do a full factory reset. DO NOT RESTORE your iPhone yet. Let it start up as a new handset. If your wifi/cellular signal does not improve, then there is likely to be a hardware issue and you should take the handset back to your point of purchase. If your signal does improve without any apps etc, then it could well be that you have some apps using background services. Turn off background services and switch off cellular data and see if this helps with the wifi stuff. If so, then you need to go through the list of apps trying out which combination works.
    iOS 8 is - in this shark's opinion - a bit of a bugfest and still has a number of issues for Apple and Developers alike. I expect to see 8.0.3 and 8.0.4 or maybe even 8.1 before too long.
    Hope this helps.

  • I have problems after upgrade my firefox

    I have problems after upgrade my firefox
    <i>(Suspected spam link removed by Moderator. Please read the [[Forum rules and guidelines]] -m)</i>

    Hey there Noel,
    It sounds like you are unable to activate your iPhone after you reset it. I recommend the steps from the following article to help you get that resolved:
    Get help activating your iPhone
    If your carrier provided a SIM card, make sure it's in your iPhone.
    Restart the iPhone.
    Try to reach the activation server another way, then try to activate.
    Try connecting to a known-good Wi-Fi network if you can't activate using a cellular data connection.
    Try connecting to iTunes if you can't activate using Wi-Fi.
    Restore the iPhone.
    Check the system status for iOS Device Activation. If the iOS Device Activation status isn't green, try activating your iPhone later.
    If you receive an alert message when you try to activate your iPhone, place the iPhone in recovery mode and perform a restore. If you still can't complete the setup assistant due to an activation error, contact Apple for assistance.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Problems after upgrade bios to v4.3 - P67A-GD65

    Hi to everybody,
    I was having a problems after upgrade bios to v4.3 of my mainboard P67A-GD65.
    After upgraded bios version (FW) its interface was changed and seemed better. also some specifiactions upgraded that i am now able to follow information of bios in my windows. with Control Center.
    1) first of all after bios upgrade XMP memory section can only be enable şf ş choose OC geniue on. but with this my cpu warm till 98C degree. because i have only stock cpu cooler of intel.
    in normal mode xmp can not be activated so that my memory that corsair vengeance dd3 1600mhz works at 1333mhz only.
    Also there was information about what is new in this version of bios fw as:
    - Enhanced PCI-E display card performance.
    - Improved memory compatibility.
    2) second problem that i have i wanted to turn cpu leds which were located above cpu slot blue leds. once i turn them off and it is ok. but when shutdown computer and restart it turn on itself.
    so may be there have benn occured a problem that mb can not save edited settings correctly?
    3) For last i could not find Winki 3 OS/linuz anywhere is there a link to it to integrate to my mb?
    Thanks for your replies from now on.
    Greetings.

    Quote from: momosala on 02-April-13, 17:54:22
    I think you had better to flash back to beta 4.39 bios, here : https://forum-en.msi.com/index.php?topic=164135.msg1214789#msg1214789
    And use and install on USB key MSI Forum HQ USB flashing tool from here : https://forum-en.msi.com/index.php?topic=108079.msg800577#msg800577
    Flash using method 1.
    And tell us if that works.
    thank you for reply that fast i will try asap and tell here.
    Btw, have you ever face a problem as i wrote above?

  • Problems after upgrade: Leopard to Leopard no longer works

    My sister upgraded to Leopard on her iMac(c2d) to Leopard yesterday. Earlier in the day we were able to do video chats with a number of people(her machine Tiger to Fathers machine Leopard). However, since upgrading, we've experienced weird behavior for video chats. Basically in her window she won't see her image(the small one), and I don't see her at all. We've tested this out with a number of other iChat accounts and get the same results. Btw, all machines that are chatting with her are using Leopard. Also, all other forms/capabilities work: screen sharing, sharing of pictures, audio chats.
    Anyone out there have similar problems after upgrading from Tiger to Leopard? I have done the usual adjustments of bandwidth and QT settings, as well as restarts. What else should I try?
    tia,
    n

    I finally resolved this problem: I think the issues/steps would be helpful for anyone who experiences iSight off or not working problems after upgrading to Leopard(then to 10.5.1) on a intel 20" iMac :
    Problem:
    -If you have an internal iSight on an iMac and your camera works fine in Tiger
    -If you upgrade to Leopard
    -If Chat camera doesn't show your image (iSight off) even though the green light is on
    -You can see the other persons video on iChat
    -Your friends can here you and you can share screens, files, etc.....everything but have them see you
    These are the initial steps I took:
    - Deleted the pLists(or stored preferences for the Application) described at the top of this thread
    - Was told it might be slow internet connection so did various things: disconnected other computers, changed wireless to "G" only
    - Specifically Opened of ports spec'd for Leopard on router (even though I hadn't needed to do this under Tiger)
    - Tried chats with various people on various fast/slow networks
    - Restarted all aspects of the network: router, wireless access point, computer
    - Checked to see if the iSight was shown in 'System Profiler'. It was found in 'About This Mac->More Info->System Profiler->USB'
    - Clicked Video icon in iChat Buddies window(to the right of your name) and coudn't see my image
    - Opened 'PhotoBooth' and coudn't see my image(black screen)
    - Opened iMovie and couldn't capture video via the iSight(black screen)
    - Opened iChat->Preferences->Video and couldn't see my image
    - Validated that 'Camera is Enabled' in iChat->Video->Camera is Enabled
    If you are experiencing a similar problem with you built-in iSight, I would probably focus on the last 5 things that I did. What they showed me was that the iSight was just not capturing video even though it was capturing sound in 3 different applications.
    The solution to iSight Off or iSight Not Responding or No Video is......reset your computer! I had thought my sister performed this but it turns out she hadn't. Here's the link to this procedure:
    http://docs.info.apple.com/article.html?artnum=303446
    Very easy to do though: Power off computer and unplug all cables, including power cable for at least 15 seconds. Plug everything back in and power up the computer and retry clicking on the 'Video' icon next to your login name. If you see yourself then...problem is solved.
    While I eventually found posts in several other forums, it took me the better part of a week. To try this simple step. I wish I had done so straight away. Oy. I guess I learned a lot about ports, speed etc.
    I hope this helps.

  • Problems after upgrading to iTunes version 6

    Hello,
    I've been going through the threads a lot since I have had problems after upgrading to iTunes v. 6. It looks like a lot of people have had the same issues, and I have tried some things that were recommended. After I upgraded, iTunes would not open. I tried:
    1. deleting sidb file
    2. doing the msconfig thing suggested in discussion boards
    3. going into safe mode and deleting 4 and 6 letter weird files in DOS - I found 3 that I deleted
    iTunes worked after this -- then I bought a song and it said my computer was not authorized, after I authorized computer (that never happened before), iTunes worked for about 15 more minutes and then closed down abruptly. I haven't been able to open it since.
    I also downloaded Spybot search & destroy and that did not find anything. I am using McAfee, and have scanned for viruses with McAfee and AdAware.
    Now, when I restart my computer, a bunch of windows pop up with Chinese/Japanese looking characters and say that device (I think) was not found. I seem to be able to use everything except iTunes and Quicktime. When I open the Task Manager, iPodService.exe and iTunesHelper.exe and qttask.exe are there, but when I click on Quicktime or iTunes the file flashes in Task Manager and then disappears.
    I'm not sure where to go from here.
    Any help would be apppreciated -- I'd like to be able to open iTunes!

    Hello,
    I used Nickroo's post:
    I was able to get iTunes launched (with the help of Tech Support) in a very unsafe environment. I owe it to those who may need this after me. It will get you going, but you will be extremely vulnerable to internet virus assaults. Please do not use this approach, until you have exhausted every other available solution for your issue in the KB.
    There are three Steps 1) Uninstall 2) Disble and 3) Reinstall.
    UNISTALL Uninstall iTunes using Windows utility Add Remove Program available in Control Panel.
    DISABLE Disable all third party System Services and Startup Items using using MSCONFIG utility as described in Service Document http://docs.info.apple.com/article.html?artnum=302538
    RE-INSTALL Re-install iTunes6 + QT7. Launch it under the Selective Startup Option.
    It worked ! You realize among other things at this point you have your Antivirus and Firewall disabled. When I started my computer in the Normal Startup Option, iTunes fails to work again. So I have ahead of me the long and ardous task of ruling out the service that is causing conflict with iTunes6. Then work with the software vendor to arrive at a solution.
    This seems to have worked so far- I haven't started to go through ruling out what made iTunes not work; I also haven't tried to connect my iPod or burn a CD, so we'll see.
    Windows XP

  • Permission problems after upgrade to 10.5 on early Power PC G5 Tower

    Permissions problems after upgrading to 10.5 on a client power PC (early) G5 tower.
    Problems include folders that are created on XServe via this client do not allow any one else including this client to access. All other clients running 10.5, which happen to be newer Intel machines do not have this problem. Repairing permissions, updating to 10.5.1, try to manually correct permissions have all failed to repair the situation. All clients log onto the XServe with the same user/password. This client has since been downgraded back to 10.4.9 and has no issues.
    The Xserve runs 10.3.9, any help would be greatly appreciated.
    We have read through the forums regarding permission problems after upgrading and even tried some tips found here.

    You really should check things out first before speaking.
    Here are the requirements for 10.5;
    Mac OS X v10.5 Leopard requires:
    A Mac computer with an Intel, PowerPC G5, or Power PC G4 (867 MHz or faster) processor
    512 MB memory or more
    A DVD drive for installation
    9 GB of available disk space or more
    Some features require a compatible Internet service provider, fees may apply.
    Some features require Apple's MobileMe service; fees apply.
    Allan

  • Date Format in TDS Upgrade Utility Import

    Hi
    Could any know the exact date format in TDS Upgrade Utility in excel file.  I tried with various formats like 01/04/2008, 20080401
    Its getting error: String was not recognized as valid Date Time. And also if you know any suggestions and solution regarding utility upgrade. please tel me.
    Thanks and Regards,
    Sudhir B.

    Hi Sudhir,
    Try: 2012-01-01 to see.
    Thanks,
    Gordon

  • Date Format problem...

    Hi users,
    Forte version : 2.e.2 and ForteWebSDK
    Datacase : Oracle
    We have a problem with a simple HTML text field which acccepts
    a date. When we try to update the record with some date, the following
    exception occurs:
    24-Jun-1998 04:32:28 : XV01086 : Execute failed for SQL statement in
    project Rap
    tServices, class RaptSqlMethods, method updateActivity, methodId 104,
    line 51, e
    rror from database is:
    ORA-01830: date format picture ends before converting entire input
    string
    The Oracle manual says that the above exception occurs when there are
    some extra characters on that field, which is not the case. In fact,
    we raise our own exception for the cases like : o1-Apr-1997,
    01-apr-97 etc. The correct format is 01-apr-1998.
    Same date soemtimes is added to the database successfully. Waht I mean
    to say that the exception deos not occur consistently.
    We just conevert the String taken from the HTML field into a Forte
    DateTimeData Object and send it to database. May be, the conversion
    part is causing the problem. But, once again the problem is not
    consistent.
    Any ideas in this will be appreciated.
    Thanx in advance
    -Rajeev Talwar
    Get Your Private, Free Email at http://www.hotmail.com
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    We had the same problem when our application first went live. The
    default date format for our Oracle database is 'dd-mmm-yy' without the
    time component. The default format for datatype DateTimeData is
    'dd-mmm-yyyy hh:mm:ss'. Since we did not want to change the default date
    format for the Database, we included in our service partitions an Alter
    Session statement to change the NLS_Date_format attribute in Oracle to
    conform to the Forte DateTimeData format. It worked.
    Kam Chow
    Mazda Australia
    -----Original Message-----
    From: Gary F Giger [mailto:[email protected]]
    Sent: Thursday, June 25, 1998 4:11 AM
    To: Rajeev Talwar
    Cc: [email protected]
    Subject: Re: Date Format problem...
    I was having the same problem a few weeks back when I would
    read/write
    dates to Oracle. I was using objects of type DateTimeData and I would
    occasionally get errors like you said you were. I found discovered my
    problem. Sometimes I would process a null date and would get an error.
    So to
    resolve this issue, I simply changes my objects of type DateTimeData to
    type
    DateTimeNullable. This enabled my Forte Application to handle regular
    dates
    as well as null dates. I have not gotten any oracle errors since then
    with
    regards to dates. Hope this helps.
    Rajeev Talwar wrote:
    Hi users,
    Forte version : 2.e.2 and ForteWebSDK
    Datacase : Oracle
    We have a problem with a simple HTML text field which acccepts
    a date. When we try to update the record with some date, the following
    exception occurs:
    24-Jun-1998 04:32:28 : XV01086 : Execute failed for SQL statement in
    project Rap
    tServices, class RaptSqlMethods, method updateActivity, methodId 104,
    line 51, e
    rror from database is:
    ORA-01830: date format picture ends before converting entire input
    string
    The Oracle manual says that the above exception occurs when there are
    some extra characters on that field, which is not the case. In fact,
    we raise our own exception for the cases like : o1-Apr-1997,
    01-apr-97 etc. The correct format is 01-apr-1998.
    Same date soemtimes is added to the database successfully. Waht I mean
    to say that the exception deos not occur consistently.
    We just conevert the String taken from the HTML field into a Forte
    DateTimeData Object and send it to database. May be, the conversion
    part is causing the problem. But, once again the problem is not
    consistent.
    Any ideas in this will be appreciated.
    Thanx in advance
    -Rajeev Talwar
    Get Your Private, Free Email at http://www.hotmail.com
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive<URL:http://pinehurst.sageit.com/listarchive/>
    Gary Giger
    Raytheon Systems Company
    300 Science Park Road
    State College, PA. 16804
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    This message has successfully passed virus checking.
    Mazda Australia takes every precaution to ensure email messages are virus free. For complete protection, you should virus test this message.
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

  • Layouts problem after upgrade

    Hello, I have a problem after upgrade from 2007 to 8.81 PL 05.
    Since we upgrade SAP, the layout changed.
    For example, in a credit note if it has 3 lines, in the layout will appear 2 lines in a page and 1 in other page.
    if the credit note has 4 lines, in the layout will appear 3 lines in a page and 1 in other page.
    What could it be?
    Thanks in advance.

    Hi!
    lines are not duplicated, they just printed on different pages:
    - if doc has just 2 lines  -  printed form is good
    - if doc has 3 items, two of them are printed on the first page, 3d - on the second page
    - if doc has 4 items, 3 of them are printed on the first page, 4th - on the second page
    When we are printing directly from the server everything is working fine. But printing from all Clients gives us this issue that is described above.
    SAP re-installation  for all users will take too much time. May be exist any other option that we can try?
    we really appreciate your help
    Natalia

  • Problem after upgrading to ICS 4.0.4

    i have different problem after upgrading my SE Live with Walkman to ICS 4.0. After upgrading, my sd card always full. I have try to remove some files but after that it full again. Finaly i found that there are tumbnail file with size precisely same with my empty space. I delete that file, but the empty space not recover, its only recover after unmounting sd card. But its not hold for long time, after one minutes its happen again, my sd card is back fully again, and the same file is back to exist. Please help me, is that a virus or bugs from ICS?? i very frustation with this case
    thanx for your help

    Do you have many pictures?
    Have your tried to reinstall the phone software using SUS to check if the problem remains?
    http://www.sonymobile.com/gb/tools/update-service/
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Several problems after upgrading to iO6

    My iphone is with multiple problems after upgrading to iOS 6. Applications are closing alone, the screen goes black and then back to the home screen. does not connect to internet (3G and Wi-Fi) connections as cutting. Throw another quick update to fix this, or do I have to change to the Galaxy SIII; Iphone is Terrible!!

    Try the Padma extension.
    *Padma: https://addons.mozilla.org/firefox/addon/padma/

  • Data format problem

    Hello All
    Can anyone help me to solve this data format problem? On the top of my program, I have declare the two variables "purchasePrice" and "purchaseAmount" as double. I dont know why, the compiler still think I didnt initialize this two variables? I have printed the error message below the code.
    Thanks for your help : )
    Jen
    =============================================================================
    double purchasePrice, purchaseAmount, GPS, total_gain, amount;
    //Find the purchase stock price
         rs = stmt.executeQuery("SELECT Price FROM PORTFOLIO WHERE Username = '"+ username+"' AND Symbol = '"+strsymbol+"'");
         while (rs.next()){
              purchasePrice = rs.getDouble("Price");
    //Calculate the amount of Gain Per Share
    GPS = intask - purchasePrice;
    //Find the purchase stock amount
    rs = stmt.executeQuery("SELECT Amount FROM PORTFOLIO WHERE Username = '"+ username+"' AND Symbol = '"+strsymbol+"'");
         while (rs.next()){
              purchaseAmount = rs.getDouble("Amount");
    //Calculate the amount of Total Gain
    total_gain = amount - purchaseAmount;
    =============================================================================
    Error message:
    variable purchasePrice might not have been initialized
    [javac] GPS = intask - purchasePrice;
    [javac] ^
    variable purchaseAmount might not have been initialized
    [javac] total_gain = amount - purchaseAmount;
    [javac] ^
    [javac] 2 errors

    Instance and class variables are automatically initialized to their default values if they are not initialized explicitly, but local variables are not. They have to be initialized explicitly before they can be referenced.
    In your code:
        while (rs.next()){
            purchasePrice = rs.getDouble("Price");
        ...purchasePrice is initialized only if rs.next() returns true. purchaseAmount has the same problem. To avoid this problem, you could declare them by:
    double purchasePrice = 0;
    double purchaseAmount = 0;

  • Login problem after upgrade to mavericks

    Hi, i have login problem after upgrade from mountain lion to movericks in imac, I did enter the correct password But back to the login page again.

    Hi cpuman8,
    Thanks for visiting Apple Support Communities.
    If you're not able to log in to your user account after upgrading, try resetting your password using the method in this article:
    Resetting the original administrator account password
    In OS X Lion or later, you can reset your user password with your Apple ID.
    OS X: Changing or resetting an account password
    http://support.apple.com/kb/ht1274
    Best Regards,
    Jeremy

Maybe you are looking for