Date in service - AP to FA Mass addition

Hi
In R12, when we ran the AP to FA Mass addition and querying mass addition in FA, system is showing new assets with date in service as the date on which Mass addition was run. Is that the intended functionality..?
Can we change the date in service as invoice date by default through mass addition program..?
regards
Ahsan

Please check in KON* series table in SE16N transaction. I guess KOHN table may help you out. You can see other similar tables.
In any one of the table you will find validity data.

Similar Messages

  • Loading categories to the mass additions interface

    Hi,
    We are doing an R12 FA implementation.
    If I explain it more detail.
    We have 11i , but we r going to scrap 11i and implement R12 fresh.
    However the data will be extracted from 11i as it is.
    As u all know we need to use either mass additions interface or the additions API. In this case we r going to use mass additions interface.For the conversion we r going to use ODI to map the data.
    The isssue we are facing is, since the ODI is going to be used it will map data from 11i base tables to the mass_additions_interface table in R12. The mapping of the categories becomes a major issue in this scenario. Since we cannot load the category combinations to the interface, instead only an ID can be populated.As I told you we r populating the 11i values it will be wrong the populate it with 11i values, because in R12 we will have a new set of category IDs.
    Can anyone help me to load the categories ( That exist in R12) to the mass additions interface using ODI? or is there a way using the API?
    Thanks and Regards,
    MPH

    Hi,
    I believe you need to define another table which maps the Old Category ID with New one. Use ODI to map the Data and this Temp table to Mass additions.
    Regards,
    Sridhar

  • Mass Additions Interface - cannot open prepare mass additions

    Hi ,
    We have loaded assets details to Mass Additions Interface using ODI, but we cannot open the prepare mass additions window in the applcations.
    When I checked it has all the details when compaired with an asset loaded to the interface with WebADi EXCEPT the MASS_ADDITION_ID,( CAN IT BE THE ISSUE)
    what could have been the reason for this type of thing?
    Thanks and Regards,
    MPH

    Hi,
    I believe you need to define another table which maps the Old Category ID with New one. Use ODI to map the Data and this Temp table to Mass additions.
    Regards,
    Sridhar

  • In Service contract, to change the valid form date on service code level.

    Hi.
    I want to change the price valid form date on service code level ( i.e. in condition)  in Service contract.
    I know i can  do that with ME32 transaction but i have lot of Service contract with more then 10,000 line items
    Is there any way that i can change in mass based on Service contract no. wise.???
    Thanks in advance..
    Edited by: VIKRANT HANDE on Sep 15, 2009 9:11 AM

    Please check in KON* series table in SE16N transaction. I guess KOHN table may help you out. You can see other similar tables.
    In any one of the table you will find validity data.

  • Data Transformation Services Execution Utility stopped working and was closed

    Hi,
    I had the SSIS packages (ETL job) working fine for a long time and then we moved the server/machine and ETL job keeps failing.
    The ETL job run number of packages. The ETL job fails for the first run then I set the retires and it works in 2nd or 3rd try on the ETL job but it fails daily for the first run where DTexec.exe crash (log pasted below)
    Server: Windows 2008 R2
    SQL Server:  SQL Server 2008 R2
    RAM 64 GB
    CPU cores 8
    we had the similar specs on previous machine and ETL job worked fine. Only difference is we have 2 SQL server instances now on same machine.
    I am suspecting it's an issue with ETL packages  but why it was working fine before for a long time and after machine move it keeps failing.
    Any thoughts?
    Version=1
    EventType=APPCRASH
    EventTime=130432662277734721
    ReportType=2
    Consent=1
    ReportIdentifier=f2ff88b6-cfc3-11e3-babd-005056997b14
    IntegratorReportIdentifier=f2ff88b5-cfc3-11e3-babd-005056997b14
    Response.type=4
    Sig[0].Name=Application Name
    Sig[0].Value=DTExec.exe
    Sig[1].Name=Application Version
    Sig[1].Value=2009.100.4263.0
    Sig[2].Name=Application Timestamp
    Sig[2].Value=5036ba73
    Sig[3].Name=Fault Module Name
    Sig[3].Value=DTSPipeline.dll
    Sig[4].Name=Fault Module Version
    Sig[4].Value=2009.100.4263.0
    Sig[5].Name=Fault Module Timestamp
    Sig[5].Value=5036ba53
    Sig[6].Name=Exception Code
    Sig[6].Value=40000015
    Sig[7].Name=Exception Offset
    Sig[7].Value=00000000000a33c5
    DynamicSig[1].Name=OS Version
    DynamicSig[1].Value=6.1.7601.2.1.0.274.10
    DynamicSig[2].Name=Locale ID
    DynamicSig[2].Value=3081
    DynamicSig[22].Name=Additional Information 1
    DynamicSig[22].Value=7c29
    DynamicSig[23].Name=Additional Information 2
    DynamicSig[23].Value=7c290b53eb7940378e43b699d1de1f07
    DynamicSig[24].Name=Additional Information 3
    DynamicSig[24].Value=199e
    DynamicSig[25].Name=Additional Information 4
    DynamicSig[25].Value=199e6470d3145d6303fbe30033cf7038
    UI[2]=C:\Program Files\Microsoft SQL Server\100\DTS\Binn\DTExec.exe
    UI[5]=Check online for a solution (recommended)
    UI[6]=Check for a solution later (recommended)
    UI[7]=Close
    UI[8]=Data Transformation Services Execution Utility stopped working and was closed
    UI[9]=A problem caused the application to stop working correctly. Windows will notify you if a solution is available.
    UI[10]=&Close
    LoadedModule[0]=C:\Program Files\Microsoft SQL Server\100\DTS\Binn\DTExec.exe
    LoadedModule[1]=C:\Windows\SYSTEM32\ntdll.dll
    LoadedModule[2]=C:\Windows\system32\kernel32.dll
    LoadedModule[3]=C:\Windows\system32\KERNELBASE.dll
    LoadedModule[4]=C:\Windows\system32\ADVAPI32.dll
    LoadedModule[5]=C:\Windows\system32\msvcrt.dll
    LoadedModule[6]=C:\Windows\SYSTEM32\sechost.dll
    LoadedModule[7]=C:\Windows\system32\RPCRT4.dll
    LoadedModule[8]=C:\Windows\WinSxS\amd64_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.6195_none_88e41e092fab0294\MSVCR80.dll
    LoadedModule[9]=C:\Windows\system32\USER32.dll
    LoadedModule[10]=C:\Windows\system32\GDI32.dll
    LoadedModule[11]=C:\Windows\system32\LPK.dll
    LoadedModule[12]=C:\Windows\system32\USP10.dll
    LoadedModule[13]=C:\Windows\system32\OLEAUT32.dll
    LoadedModule[14]=C:\Windows\system32\ole32.dll
    LoadedModule[15]=C:\Program Files\Microsoft SQL Server\100\DTS\Binn\DTEParse.dll
    LoadedModule[16]=C:\Windows\WinSxS\amd64_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.6195_none_88e41e092fab0294\MSVCP80.dll
    LoadedModule[17]=C:\Program Files\Microsoft SQL Server\100\DTS\Binn\DTEPkg.dll
    LoadedModule[18]=C:\Windows\WinSxS\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.6195_none_8a1dd9552ed7f8d8\ATL80.DLL
    LoadedModule[19]=C:\Windows\system32\PSAPI.DLL
    LoadedModule[20]=C:\Windows\system32\VERSION.dll
    LoadedModule[21]=C:\Windows\system32\IMM32.DLL
    LoadedModule[22]=C:\Windows\system32\MSCTF.dll
    LoadedModule[23]=C:\Windows\system32\CRYPTBASE.dll
    LoadedModule[24]=C:\Windows\system32\CLBCatQ.DLL
    LoadedModule[25]=C:\Program Files\Microsoft SQL Server\100\DTS\Binn\DTS.dll
    LoadedModule[26]=C:\Windows\system32\SHLWAPI.dll
    LoadedModule[27]=C:\Program Files\Microsoft SQL Server\100\DTS\Binn\dtsmsg100.dll
    LoadedModule[28]=C:\Windows\system32\CRYPT32.dll
    LoadedModule[29]=C:\Windows\system32\MSASN1.dll
    LoadedModule[30]=C:\Windows\system32\SXS.DLL
    LoadedModule[31]=C:\Windows\System32\msxml6.dll
    LoadedModule[32]=C:\Windows\system32\CRYPTSP.dll
    LoadedModule[33]=C:\Windows\system32\rsaenh.dll
    LoadedModule[34]=C:\Windows\system32\RpcRtRemote.dll
    LoadedModule[35]=C:\Program Files\Microsoft SQL Server\100\DTS\Binn\DtsConn.dll
    LoadedModule[36]=C:\Windows\system32\SHELL32.dll
    LoadedModule[37]=C:\Windows\system32\mscoree.dll
    LoadedModule[38]=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscoreei.dll
    LoadedModule[39]=C:\Windows\Microsoft.NET\Framework64\v2.0.50727\mscorwks.dll
    LoadedModule[40]=C:\Windows\system32\profapi.dll
    LoadedModule[41]=C:\Windows\assembly\NativeImages_v2.0.50727_64\mscorlib\88744044294787b99dd4a8704ab75a79\mscorlib.ni.dll
    LoadedModule[42]=C:\Windows\assembly\NativeImages_v2.0.50727_64\System\af0a0b96a02f9925eb84392ee65a5cfa\System.ni.dll
    LoadedModule[43]=C:\Windows\assembly\NativeImages_v2.0.50727_64\Microsoft.SqlServer#\40937910f60adedfb214d89b989f929d\Microsoft.SqlServer.ManagedDTS.ni.dll
    LoadedModule[44]=C:\Windows\assembly\NativeImages_v2.0.50727_64\Microsoft.SqlServer#\f82fe091649105fb4de1195cb9da7438\Microsoft.SqlServer.DTSRuntimeWrap.ni.dll
    LoadedModule[45]=C:\Windows\assembly\NativeImages_v2.0.50727_64\Microsoft.SqlServer#\77e0f983055ea695867ca69afaecda79\Microsoft.SqlServer.SQLTask.ni.dll
    LoadedModule[46]=C:\Windows\assembly\NativeImages_v2.0.50727_64\System.Xml\3975acf49313ceea1280da91f0383480\System.Xml.ni.dll
    LoadedModule[47]=C:\Windows\assembly\NativeImages_v2.0.50727_64\Microsoft.SqlServer#\80c6801f36d7c3e891323f6b53dccbcc\Microsoft.SqlServer.Msxml6_interop.ni.dll
    LoadedModule[48]=C:\Program Files\Microsoft SQL Server\100\DTS\Binn\ExecPackageTask.dll
    LoadedModule[49]=C:\Program Files\Microsoft SQL Server\100\DTS\Binn\Resources\1033\dtsmsg100.rll
    LoadedModule[50]=C:\Windows\system32\urlmon.dll
    LoadedModule[51]=C:\Windows\system32\api-ms-win-downlevel-ole32-l1-1-0.dll
    LoadedModule[52]=C:\Windows\system32\api-ms-win-downlevel-shlwapi-l1-1-0.dll
    LoadedModule[53]=C:\Windows\system32\api-ms-win-downlevel-advapi32-l1-1-0.dll
    LoadedModule[54]=C:\Windows\system32\api-ms-win-downlevel-user32-l1-1-0.dll
    LoadedModule[55]=C:\Windows\system32\api-ms-win-downlevel-version-l1-1-0.dll
    LoadedModule[56]=C:\Windows\system32\api-ms-win-downlevel-normaliz-l1-1-0.dll
    LoadedModule[57]=C:\Windows\system32\normaliz.DLL
    LoadedModule[58]=C:\Windows\system32\iertutil.dll
    LoadedModule[59]=C:\Windows\system32\WININET.dll
    LoadedModule[60]=C:\Windows\system32\api-ms-win-downlevel-shlwapi-l2-1-0.dll
    LoadedModule[61]=C:\Program Files\Microsoft SQL Server\100\DTS\Binn\DTSComExprEval.dll
    LoadedModule[62]=C:\Program Files\Microsoft SQL Server\100\Shared\instapi10.dll
    LoadedModule[63]=C:\Program Files\Microsoft SQL Server\100\Shared\SQLBoot.dll
    LoadedModule[64]=C:\Windows\assembly\NativeImages_v2.0.50727_64\Microsoft.SqlServer#\c9743c9d2ac43664c43d9a0b3fbb5548\Microsoft.SqlServer.DtsMsg.ni.dll
    LoadedModule[65]=C:\Windows\assembly\NativeImages_v2.0.50727_64\Microsoft.SqlServer#\5ef353725aeb5af35fb49c3f300c38b3\Microsoft.SqlServer.SQLTaskConnectionsWrap.ni.dll
    LoadedModule[66]=C:\Windows\assembly\NativeImages_v2.0.50727_64\Microsoft.SqlServer#\52f53ccfcc9570f1fd13f63d0a640e81\Microsoft.SqlServer.BatchParser.ni.dll
    LoadedModule[67]=C:\Windows\assembly\GAC_64\Microsoft.SqlServer.BatchParser\10.0.0.0__89845dcd8080cc91\Microsoft.SqlServer.BatchParser.dll
    LoadedModule[68]=C:\Windows\WinSxS\amd64_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.6195_none_88e41e092fab0294\msvcm80.dll
    LoadedModule[69]=C:\Program Files\Common Files\System\Ole DB\oledb32.dll
    LoadedModule[70]=C:\Windows\system32\MSDART.DLL
    LoadedModule[71]=C:\Windows\system32\bcrypt.dll
    LoadedModule[72]=C:\Windows\WinSxS\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_fa396087175ac9ac\Comctl32.dll
    LoadedModule[73]=C:\Program Files\Common Files\System\Ole DB\OLEDB32R.DLL
    LoadedModule[74]=C:\Windows\system32\comsvcs.dll
    LoadedModule[75]=C:\Windows\system32\bcryptprimitives.dll
    LoadedModule[76]=C:\Windows\system32\sqlncli10.dll
    LoadedModule[77]=C:\Windows\WinSxS\amd64_microsoft.windows.common-controls_6595b64144ccf1df_5.82.7601.18201_none_a4d3b9377117c3df\COMCTL32.dll
    LoadedModule[78]=C:\Windows\system32\COMDLG32.dll
    LoadedModule[79]=C:\Windows\system32\NETAPI32.dll
    LoadedModule[80]=C:\Windows\system32\netutils.dll
    LoadedModule[81]=C:\Windows\system32\srvcli.dll
    LoadedModule[82]=C:\Windows\system32\wkscli.dll
    LoadedModule[83]=C:\Windows\system32\WS2_32.dll
    LoadedModule[84]=C:\Windows\system32\NSI.dll
    LoadedModule[85]=C:\Windows\system32\1033\SQLNCLIR10.RLL
    LoadedModule[86]=C:\Windows\system32\secur32.dll
    LoadedModule[87]=C:\Windows\system32\SSPICLI.DLL
    LoadedModule[88]=C:\Windows\system32\credssp.dll
    LoadedModule[89]=C:\Windows\system32\kerberos.DLL
    LoadedModule[90]=C:\Windows\system32\cryptdll.dll
    LoadedModule[91]=C:\Windows\system32\msv1_0.DLL
    LoadedModule[92]=C:\Windows\system32\ntdsapi.dll
    LoadedModule[93]=C:\Windows\system32\LOGONCLI.DLL
    LoadedModule[94]=C:\Windows\system32\security.dll
    LoadedModule[95]=C:\Windows\system32\schannel.DLL
    LoadedModule[96]=C:\Program Files\Microsoft SQL Server\90\Shared\instapi.dll
    LoadedModule[97]=C:\Windows\system32\mswsock.dll
    LoadedModule[98]=C:\Windows\System32\wshtcpip.dll
    LoadedModule[99]=C:\Windows\System32\wship6.dll
    LoadedModule[100]=C:\Windows\system32\DNSAPI.dll
    LoadedModule[101]=C:\Windows\system32\IPHLPAPI.DLL
    LoadedModule[102]=C:\Windows\system32\WINNSI.DLL
    LoadedModule[103]=C:\Windows\system32\rasadhlp.dll
    LoadedModule[104]=C:\Windows\System32\fwpuclnt.dll
    LoadedModule[105]=C:\Windows\system32\ncrypt.dll
    LoadedModule[106]=C:\Program Files\Microsoft SQL Server\100\DTS\Binn\SQLTaskConnections.dll
    LoadedModule[107]=C:\Windows\system32\ODBC32.dll
    LoadedModule[108]=C:\Program Files\Microsoft SQL Server\100\DTS\Binn\BatchParser.dll
    LoadedModule[109]=C:\Windows\system32\odbcint.dll
    LoadedModule[110]=C:\Windows\Microsoft.NET\Framework64\v2.0.50727\mscorjit.dll
    LoadedModule[111]=C:\Windows\assembly\NativeImages_v2.0.50727_64\System.Data\5e957216f11830cbc49b4b30314e0e10\System.Data.ni.dll
    LoadedModule[112]=C:\Windows\assembly\GAC_64\System.Data\2.0.0.0__b77a5c561934e089\System.Data.dll
    LoadedModule[113]=C:\Windows\assembly\NativeImages_v2.0.50727_64\System.AddIn\b3b4d44d80055c9e96909f153ff92fbc\System.AddIn.ni.dll
    LoadedModule[114]=C:\Windows\assembly\NativeImages_v2.0.50727_64\Microsoft.SqlServer#\5388ebc8e600ad2542d8afbef9559944\Microsoft.SqlServer.ScriptTask.ni.dll
    LoadedModule[115]=C:\Windows\assembly\NativeImages_v2.0.50727_64\Microsoft.SqlServer#\492ba64d2cb55aa910114c85c2327821\Microsoft.SqlServer.VSTAScriptingLib.ni.dll
    LoadedModule[116]=C:\Windows\assembly\NativeImages_v2.0.50727_64\Microsoft.VisualStu#\f3ab3bf00723d757396110ac3dc57a6d\Microsoft.VisualStudio.Tools.Applications.DesignTime.v9.0.ni.dll
    LoadedModule[117]=C:\Program Files\Microsoft SQL Server\100\DTS\Binn\DTSPipeline.dll
    LoadedModule[118]=C:\Windows\assembly\NativeImages_v2.0.50727_64\Microsoft.SqlServer#\06aaaec444077ab8248b28b0bdf2c3b2\Microsoft.SqlServer.PipelineXML.ni.dll
    LoadedModule[119]=C:\Windows\assembly\NativeImages_v2.0.50727_64\Microsoft.SqlServer#\3dce1dfa4ea9d165471de3b83b82893c\Microsoft.SqlServer.SqlTDiagM.ni.dll
    LoadedModule[120]=C:\Windows\assembly\NativeImages_v2.0.50727_64\Microsoft.SqlServer#\4f58550979ad960c616b557266fbc5d0\Microsoft.SqlServer.Diagnostics.STrace.ni.dll
    LoadedModule[121]=C:\Windows\assembly\NativeImages_v2.0.50727_64\System.Configuration\fed86e49fe95761085bf287f901f5b53\System.Configuration.ni.dll
    LoadedModule[122]=C:\Windows\assembly\NativeImages_v2.0.50727_64\Microsoft.SqlServer#\6f12b249b9bd278ddc1a5ea48fb1221e\Microsoft.SqlServer.DTSPipelineWrap.ni.dll
    LoadedModule[123]=C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\OleDbSrc.dll
    LoadedModule[124]=C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\OleDbDest.dll
    LoadedModule[125]=C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TxDerived.dll
    LoadedModule[126]=C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TxRowCount.dll
    LoadedModule[127]=C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\CommandDest.dll
    LoadedModule[128]=C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TxSplit.dll
    LoadedModule[129]=C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TxMergeJoin.dll
    LoadedModule[130]=C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TxSort.dll
    LoadedModule[131]=C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TxDataConvert.dll
    LoadedModule[132]=C:\Windows\assembly\NativeImages_v2.0.50727_64\Microsoft.SqlServer#\78f11d2ba751edf529c28ca8b012d697\Microsoft.SqlServer.PipelineHost.ni.dll
    LoadedModule[133]=C:\Windows\assembly\GAC_MSIL\KimballMethodSCD100\1.0.0.0__8b0551303405e96c\KimballMethodSCD100.dll
    LoadedModule[134]=C:\Windows\assembly\GAC_MSIL\SSISComponentUtilities\1.0.0.0__8b0551303405e96c\SSISComponentUtilities.dll
    LoadedModule[135]=C:\Windows\assembly\NativeImages_v2.0.50727_64\System.Drawing\868d117286ad259249f31d3fe813d39a\System.Drawing.ni.dll
    LoadedModule[136]=C:\Windows\assembly\NativeImages_v2.0.50727_64\CustomMarshalers\98e9b163a01ce659f1bb3d7ee15be7bf\CustomMarshalers.ni.dll
    LoadedModule[137]=C:\Windows\assembly\GAC_64\CustomMarshalers\2.0.0.0__b03f5f7f11d50a3a\CustomMarshalers.dll
    LoadedModule[138]=C:\Windows\system32\apphelp.dll
    LoadedModule[139]=C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TxLookup.dll
    LoadedModule[140]=C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TxUnionAll.dll
    LoadedModule[141]=C:\Windows\assembly\NativeImages_v2.0.50727_64\EnvDTE\4a689bff8b507e736eea8e5b2b21d42a\EnvDTE.ni.dll
    FriendlyEventName=Stopped working
    ConsentKey=APPCRASH
    AppName=Data Transformation Services Execution Utility
    AppPath=C:\Program Files\Microsoft SQL Server\100\DTS\Binn\DTExec.exe

    Hi Arthur,
    Yes both instances are same.
    Microsoft SQL Server 2008 R2 (SP2) - 10.50.4263.0 (X64)   Aug 23 2012 15:56:56   Copyright (c) Microsoft Corporation  Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
    I have run the Main package using the using SQL Agent, main package calls the child packages.
    The error message shown on SQL agent job is:
    R6025  - pure virtual function call.  The return value was unknown.  The process exit code was 255.
    or sometimes 
    The step did not generate any output.  The return value was unknown.  The process exit code was -532459699.
    in the even log it says:
    Error Level:
    Event ID 1000
    Faulting application name: DTExec.exe, version: 2009.100.4263.0, time stamp: 0x5036ba73
    Faulting module name: DTSPipeline.dll, version: 2009.100.4263.0, time stamp: 0x5036ba53
    Exception code: 0x40000015
    Fault offset: 0x00000000000a33c5
    Faulting process id: 0x98c
    Faulting application start time: 0x01cf64ba9b72b27c
    Faulting application path: C:\Program Files\Microsoft SQL Server\100\DTS\Binn\DTExec.exe
    Faulting module path: C:\Program Files\Microsoft SQL Server\100\DTS\Binn\DTSPipeline.dll
    Report Id: e8eb9b4f-d0ad-11e3-babd-005056997b14
    Information Level:
    Windows error reporting  Event ID 1001
    Fault bucket , type 0
    Event Name: APPCRASH
    Response: Not available
    Cab Id: 0
    Problem signature:
    P1: DTExec.exe
    P2: 2009.100.4263.0
    P3: 5036ba73
    P4: DTSPipeline.dll
    P5: 2009.100.4263.0
    P6: 5036ba53
    P7: 40000015
    P8: 00000000000a33c5
    P9:
    P10:
    Attached files:
    These files may be available here:
    C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_DTExec.exe_ccc7a4e176faafbea69955957371ea96e175b_44c41e3e
    Analysis symbol:
    Rechecking for solution: 0
    Report Id: e8eb9b4f-d0ad-11e3-babd-005056997b14
    Report Status: 4

  • Unable to connect to the Data Access service for this management server

    Hate to raise a sleeping horse but was hoping someone might have some insight into why SCOM Report Server install is failing. I am using a domain account for SCOM 2012 R2 services in a distributive environment
    with 2 management servers and 2 SQL servers…one for Ops db and one for DW db.
     Install was failing on selecting the management server. Research led me to
    Kevin Holman's site. I followed his doc and SPN are set per your config and can telnet to MGMT1 on 5723…firewall is off on all servers. I am a domain admin and scom.mgmt account (MSOMSdkSvc) is a local admin on the MGMT servers.
    >setspn -l domain\scom.mgmt
    Registered ServicePrincipalNames for CN=scom.mgmt,OU=Service Accounts,DC= domain,DC=net:
    MSOMSdkSvc/SCOM-MGMT1
    MSOMSdkSvc/SCOM-MGMT1.domain.net
    MSOMSdkSvc/SCOM-MGMT2
    MSOMSdkSvc/SCOM-MGMT2.domain.net
    >setspn -l domain\scom-mgmt1
    Registered ServicePrincipalNames for CN=SCOM-MGMT1,OU=SCOM,OU=INTERNAL,DC=domain,DC=net:
    MSOMHSvc/SCOM-MGMT1.domain.net
    TERMSRV/SCOM-MGMT1.domain.net
    WSMAN/SCOM-MGMT1.domain.net
    RestrictedKrbHost/SCOM-MGMT1.domain.net
    HOST/SCOM-MGMT1.domain.net
    MSOMHSvc/SCOM-MGMT1
    TERMSRV/SCOM-MGMT1
    WSMAN/SCOM-MGMT1
    RestrictedKrbHost/SCOM-MGMT1
    HOST/SCOM-MGMT1
    >setspn -l domain\scom-mgmt2
    Registered ServicePrincipalNames for CN=SCOM-MGMT2,OU=SCOM,OU=INTERNAL,DC=domain,DC=net:
    MSOMHSvc/ SCOM-MGMT2.domain.net
    MSOMHSvc/ SCOM-MGMT2
    WSMAN/SCOM-MGMT2.domain.net
    WSMAN/SCOM-MGMT2
            TERMSRV/SCOM-MGMT2.domain.net
    TERMSRV/SCOM-MGMT2
    RestrictedKrbHost/SCOM-MGMT2
    HOST/CHH-SCOM-MGMT2
    RestrictedKrbHost/CHH-SCOM-MGMT2.osi-asp.net
    HOST/CHH-SCOM-MGMT2.osi-asp.net
    >setspn -l domain\scom-ssrs
    Registered ServicePrincipalNames for CN=SCOM-SSRS,OU=SCOM SQL,OU=SCOM,OU=CHH-INTERNAL,DC=domain,DC=net:
        WSMAN/SCOM-SSRS
    WSMAN/SCOM-SSRS.domain.net
    MSSQLSvc/SCOM-SSRS.domain.net
    MSSQLSvc/SCOM-SSRS.domain.net:1433
        TERMSRV/SCOM-SSRS.domain.net
    TERMSRV/SCOM-SSRS
    RestrictedKrbHost/SCOM-SSRS
      HOST/SCOM-SSRS
    RestrictedKrbHost/SCOM-SSRS.domain.net
    HOST/SCOM-SSRS.domain.net
    When I point to the MGMT server, I keep getting “Unable to connect to the Data Access service for this management server. Ensure the Data Access service is running and that the service, the management group, and setup are
    all the same version”.
    OpsMgrSetupWizard.log states…
    Info:     
    :Could not connect to Management Server: scom-mgmt1.domain.net with exception: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or
    too long.
    Info:     
    :StackTrace:   at System.Version.TryParseVersion(String version, VersionResult& result) at System.Version..ctor(String version) at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.IsManagementServerCurrentVersion(String
    managementServer) at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.CanConnectToManagementGroup(String managementServer)
    When I searched on "Exception.Message: Version string portion was too short or too long" it led me to .Net strings in the reg. i deleted all refs to older versions (3.x) but still no good.
    Bob

    Well, I’m back to trying to get SCOM Report Server up and running. This time I decided to try the command line silent install and rely on logs to debug. But it still fails.
    This is the script: SETUP /install /InstallPath:D:\Program Files\Microsoft System Center 2012 R2\Operations Manager /components:OMReporting /ManagementServer:<server>.<domain> /SRSInstance:<instance> /DataReaderUser:<domain>\<account>
    /DataReaderPassword:******** /SendODRReports:0 /UseMicrosoftUpdate:0 /AcceptEndUserLicenseAgreement:1
    When I run the script, I get a pop-up: “System CenterOperations Manager Setup has stopped working with the following:
    Problem signature:
    Problem Event Name:                       
    CLR20r3
    Problem Signature 01:                      
    setupchainerui.exe
    Problem Signature 02:                      
    7.0.5000.0
    Problem Signature 03:                      
    522a5b85
    Problem Signature 04:                      
    mscorlib
    Problem Signature 05:                      
    4.0.0.0
    Problem Signature 06:                      
    53b4fc1e
    Problem Signature 07:                      
    e4d
    Problem Signature 08:                      
    5a
    Problem Signature 09:                      
    System.FormatException
    OS Version:                                         
    6.1.7601.2.1.0.274.10
    Locale ID:                                            
    1033
    Additional Information 1:                 
    4911
    Additional Information 2:                 
    49111a576c61a461b7f2900e4224563c
    Additional Information 3:                 
    a1e6
    Additional Information 4:                 
    a1e62e9c159c1d7601a31ccff83dbf94
    App Event Log:
    - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    - <System>
    <Provider Name=".NET Runtime" />
    <EventID Qualifiers="0">1026</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-29T19:02:39.000000000Z" />
    <EventRecordID>4999</EventRecordID>
    <Channel>Application</Channel>
    <Computer>SERVER NAME</Computer>
    <Security />
    </System>
    - <EventData>
    <Data>Application: SetupChainerUI.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception.
    Exception Info: System.FormatException Stack: at Microsoft.SystemCenter.Essentials.SetupFramework.Program.Main()</Data>
    </EventData>
    </Event>
    - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    - <System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-29T19:02:41.000000000Z" />
    <EventRecordID>5000</EventRecordID>
    <Channel>Application</Channel>
    <Computer>SERVER NAME</Computer>
    <Security />
    </System>
    - <EventData>
    <Data>SetupChainerUI.exe</Data>
    <Data>7.1.10226.0</Data>
    <Data>522a5b85</Data>
    <Data>KERNELBASE.dll</Data>
    <Data>6.1.7601.18409</Data>
    <Data>5315a05a</Data>
    <Data>e0434352</Data>
    <Data>000000000000940d</Data>
    <Data>a64</Data>
    <Data>01d03bf626a03a7a</Data>
    <Data>C:\Users\USER NAME\AppData\Local\SCOM\Setup\SetupChainerUI.exe</Data>
    <Data>C:\Windows\system32\KERNELBASE.dll</Data>
    <Data>65be21be-a7e9-11e4-a4d7-005056966e1b</Data>
    </EventData>
    </Event>
    - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    - <System>
    <Provider Name="Windows Error Reporting" />
    <EventID Qualifiers="0">1001</EventID>
    <Level>4</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-29T19:03:27.000000000Z" />
    <EventRecordID>5001</EventRecordID>
    <Channel>Application</Channel>
    <Computer>SERVER NAME</Computer>
    <Security />
    </System>
    - <EventData>
    <Data />
    <Data>0</Data>
    <Data>CLR20r3</Data>
    <Data>Not available</Data>
    <Data>0</Data>
    <Data>setupchainerui.exe</Data>
    <Data>7.0.5000.0</Data>
    <Data>522a5b85</Data>
    <Data>mscorlib</Data>
    <Data>4.0.0.0</Data>
    <Data>53b4fc1e</Data>
    <Data>e4d</Data>
    <Data>5a</Data>
    <Data>System.FormatException</Data>
    <Data />
    <Data />
    <Data>C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_setupchainerui.e_9724aaa8eec4ffba07c27fea369e612e949d75_5b269652</Data>
    <Data />
    <Data>0</Data>
    <Data>65be21be-a7e9-11e4-a4d7-005056966e1b</Data>
    <Data>0</Data>
    </EventData>
    </Event>
    OpsMgrSetupWizard.log
    [13:48:16]:          
    Error:     :Uncaught Exception: Threw Exception.Type: System.FormatException, Exception Error Code: 0x80131537, Exception.Message: Input string was not in a correct format.
    [13:48:16]:          
    Error:     :StackTrace:  
    at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
       at System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info)
       at System.Convert.ChangeType(Object value, Type conversionType, IFormatProvider provider)
       at Microsoft.SystemCenter.Essentials.SetupFramework.PropertyBagDictionary.GetProperty[T](String property)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.ValidateBureaucraticSwitches()
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.RationalizeCommandLineArguments.ValidateSilentInstallCommandLineOptions()
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.RationalizeCommandLineArguments.Rationalize()
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.RationalizeGeneralInstall()
       at Microsoft.SystemCenter.Essentials.SetupFramework.Program.RationalizeInstall()
       at Microsoft.SystemCenter.Essentials.SetupFramework.Program.Main()
    Any ideas? I feel like I’m just going in circles…Bob

  • Life in months is not populating from interface in Mass Additions Post

    Hi,
    We have one critical issue in FA conversion.We have popultaed the life_in_months in fa_mass_additions table.When we run the Mass Additions Post,it is defaulting the life_in_months from category and not from fa_mass_additions interface table.As per intended functionality,it should populate from interface table.
    If any of you encounter the issue,Please let me know the soultinon.
    Thnaks
    Praveen

    >
    DATA showing on front end,but it is not populating into base table AP_INVOICE_DISTRIBUTIONS_ALL.
    >
    Are you saying you can see the distributions from front end but not in the table?
    Did you populate the distribution related columns in AP_INVOICE_LINES_INTERFACE (e.g. DIST_CODE_COMBINATION_ID)?
    Sandeep Gandhi

  • Error 140 when starting Data Flow service

    I installed Oracle BAM on Windows XP few days ago and it was working fine. Today I tried to start it but I get this error. It says: "Contact the service vendor and refer to service specific error code 140"
    BAM install guide says to check system event logs... I clear all logfiles in Event viewer and I checked and confirmed that the option " Overwrite event logfiles as needed" is selected.
    BAM Install guide says I need to start the TNS listener and Oracle Database service first. Looking in the Windows services, I don't have these 2 (and I have never had these). I do have Oracle Lite Multiuser, OracleMTR recovery service and Oracleoracle2client cache (not sure if this is for BAM though)...
    Additional info that may help:
    System Event has this:
    The Oracle BAM Data Flow Service service terminated with service-specific error 140 (0x8C).
    Application event viewer has this:
    Invalid DataMart Service License. Please call Sagent Technical Support. Invalid DataMart Server License: E04
    I am not clear what is this datamart service and why I am getting this error.
    Thanks

    Not sure what error you are hitting. Make sure you can reach your database from DOS prompt using tnsping or sqlplus commands. And your database version matches the supported db, BAM does not support OracleLite. Not sure what your earlier working condition was, (Did you use a remote DB)

  • KIMYONG: Mass Addition Create 에서 Ctrl + F11 이로 Invoice조회가 되지 않을때

    Purpose
    Prepare Mass additions form,Ctrl+F11 조회시 모든 Data가 return되지 않는 경우가 있습니다.
    이에 대한 원인및 조치사항을 제공하고자 합니다.
    Solution
    원인은 아래 bug처럼 Security by book setup이 되어 있을경우 발생합니다.
    Bug 5186425 FAXMADDS: Can Query Mass Additions of all Secured Books in summary Window
    해결책으로는 아래와 같은 것들이 제시되고 있습니다.
    This issue has been fixed in the file FAXMADDS.fmb version 115.270 or higher.
    If you are on 11i.FA.P , Please apply one-off Patch 5229010.
    This patch includes FAXMADDS.fmb version 115.271.
    Reference
    Note 370480.1

  • Fixed Assets Mass Addition

    Hi,
    We have the below requirement in 11i:
    When there is a mass addition, there should be an option to assign accounting code combinations at a category or setup level so that it defaults to all items on a divisional accounting basis. This is to enable divisional accounting for Balance Sheet and Depreciation (Profit & Loss).
    Is this possible using standard functionality?
    thanks.
    S.Sriram

    Hi
    I am using Solution beacon vision instance and have tried entering an asset using mass additions and below are my observations:
    I entered the Asset book, Transaction date, asset category, number of units and than clicked on the Assignments button and entered the Expense Account and Location.
    For the expense acount the system is automatically defaulting the following:
    Company Segment Value - 01 as company value (since the default value has been set at the Key Flexfields segments window)
    Account Segment Value - Depreciation expense account (This value is being defaulted from the Asset category window based on the Category setup)
    Sub-Account - Defaulted as 0000 (since the default value has been set at the Key Flexfields segments window)
    Product - Defaulted as 0000 (since the default value has been set at the Key Flexfields segments window)
    The system is prompting me to enter the value for the department segment as it is not automatically defaulted. (No Default value has been set at the Key flexfields segments window)
    I didnt find a place where in i can see the asset clearing account or cip clearing account was being asked or used while creating mass additions.
    When the asset is being brought from other module such as Payables, than the Asset clearing account or CIP Clearing account would have been entered at the Invoice distributions level and that is being brought into the Mass additions window and is displayed in the source tab screen.
    But apart from the above i have not been able to find a tab/field wherein system asks or prompt me to enter the other accounts as mentioned by you.
    Based on the above, do you find any difference of what you might be seeing or the accounts being defaulted.
    Thanks and Regards
    Manish Jain.

  • SCOM 2012 Data Access Service could not start

    Hello,
    I have 3 SCOM 2012 servers. I got the error that the All Managament Server Pool is not available. Google search give me a lot of posts to add folder PoolManager at HKLM\System\CurrontControlSet\services\HealthService\Parameters with the DWORD keys PoolLeaseRequestPeriodSeconds
    600 and PoolNetworkLatencySeconds 120. After restarting last SCOM server the Data Access Service could not run "Windows could not start the System Center Data Access Service. Error 1053: The service did not respond to the start or control request in a
    timely fashion"
    At Operations Manager Eventlog I see an error: "OpsMgr Management Configuration Service failed to communicate with System Center Data Access Service due the following exception: System.Runtime.Remoting.RemotingException: Unable to get ISdkService interface.
    Please make sure local Sdk Service is running."
    At System Eventlog I see an error: "A timeout was reached (30000 milliseconds) while waiting for the System Center Data Access Service service to connect."
    Why did it run on the both other servers and failes on the third one? What can I check?
    Regards, Doreen

    Hi,
    According to my understanding, after editing the registry key value, two of three management servers work fine now, and the issue only occur to the third one. Whether all those servers are running with Windows server 2012?
    I would like to suggest you re-check the service account for the data access service, maybe we can re-enter the account credential. Those three servers may use the same account for the service, make sure the account is not disabled and you enter in the right
    password for it.
    Here is a similar thread, please go through it for more details:
    http://social.technet.microsoft.com/Forums/en-US/f2281934-513d-4b60-bb4b-34ae8a892ace/failed-to-open-the-console-and-system-center-data-access-service-wont-start-scom-2012?forum=operationsmanagergeneral
    In addition, please also restart the third server and check the result, and I know that there is a similar error message in SCOM 2007:
    http://blogs.technet.com/b/csstwplatform/archive/2012/01/02/scom-2007-r2-unable-to-open-the-scom-console-after-server-reboot-the-sdk-service-is-stopped.aspx
    Regards,
    Yan Li
    Regards, Yan Li

  • Mass Additions WEB ADI Issue

    All,
    Has anyone come across a need to modify the mass additions upload via web adi, to do validation on asset numbers. We find that if we use web adi to mass additions, the error of duplicate asset numbers is only picked up when we do a post. Our users require that validation, when they do the upload from web adi. As this was a functionality that desktop adi provided.
    Any help here would be much appreciated.

    Hi
    Can you think about one work around
    1. Import Asset table containing Asset Number before uploading the asset using Web ADI.
    2. Compare the Imported data with Web ADI Template using EXCEL macro check or using a sql script
    Have you loged SR & wether Oracle can think of some Validation (as this is the standard functionality) ?
    Regards
    Sunil Kumar

  • Fa mass additions (fa_addition_pub.do_addition)

    Hi All,
    I am working on Mass Addition interface. After successfull execution of fa_addition_pub.do_addition package.I got asset_id too..
    output :-
    S 0
    SUCCESS
    THID 167215
    ASSET_ID 109950
    ASSET_NUMBER 99339
    But my issue is i am not able to get this data in fa_mass_addition table ...In which table this data is updated ?
    How to get the data in Fa Mass Addition so that i can run 'post mass addition' to get status as posted..?
    Your knowledge will be appreciable..
    Thanks
    Raman Sharma

    FA_ADDITIONS_B table in the FA
    but will u provide the script or review mine ..
    /* Formatted on 2012/05/23 14:19 (Formatter Plus v4.8.8) */
    DECLARE
    -- CURSOR C1
    -- IS
    -- SELECT *
    -- FROM MCB_FA_TABLE;
    P_API_VERSION NUMBER;
    P_INIT_MSG_LIST VARCHAR2 (200);
    P_COMMIT VARCHAR2 (200);
    P_VALIDATION_LEVEL NUMBER;
    X_RETURN_STATUS VARCHAR2 (200);
    X_MSG_COUNT NUMBER;
    X_MSG_DATA VARCHAR2 (200);
    P_CALLING_FN VARCHAR2 (200);
    PX_ASSET_DIST_REC FA_API_TYPES.ASSET_DIST_REC_TYPE;
    PX_TRANS_REC FA_API_TYPES.TRANS_REC_TYPE;
    PX_DIST_TRANS_REC FA_API_TYPES.TRANS_REC_TYPE;
    PX_ASSET_HDR_REC FA_API_TYPES.ASSET_HDR_REC_TYPE;
    PX_ASSET_DESC_REC FA_API_TYPES.ASSET_DESC_REC_TYPE;
    PX_ASSET_TYPE_REC FA_API_TYPES.ASSET_TYPE_REC_TYPE;
    PX_ASSET_CAT_REC FA_API_TYPES.ASSET_CAT_REC_TYPE;
    PX_ASSET_HIERARCHY_REC FA_API_TYPES.ASSET_HIERARCHY_REC_TYPE;
    PX_ASSET_FIN_REC FA_API_TYPES.ASSET_FIN_REC_TYPE;
    PX_ASSET_DEPRN_REC FA_API_TYPES.ASSET_DEPRN_REC_TYPE;
    PX_ASSET_DIST_TBL FA_API_TYPES.ASSET_DIST_TBL_TYPE;
    PX_INV_TBL FA_API_TYPES.INV_TBL_TYPE;
    LV_COUNT NUMBER := 1;
    L_MESG_COUNT VARCHAR2 (2000);
    L_MESG VARCHAR2 (2000);
    L_RETURN_STATUS VARCHAR2 (2000);
    PX_INV_RATE_TBL FA_API_TYPES.INV_RATE_TBL_TYPE;
    PX_INV_REC FA_API_TYPES.INV_REC_TYPE;
    PX_INV_TRANS_REC FA_API_TYPES.INV_TRANS_REC_TYPE;
    BEGIN
    BEGIN
    FA_SRVR_MSG.INIT_SERVER_MESSAGE;
    FND_MSG_PUB.INITIALIZE;
    END;
    P_API_VERSION := 1.0;
    P_INIT_MSG_LIST := FND_API.G_FALSE;
    P_COMMIT := FND_API.G_FALSE;
    P_VALIDATION_LEVEL := FND_API.G_VALID_LEVEL_FULL;
    X_RETURN_STATUS := L_RETURN_STATUS;
    X_MSG_COUNT := L_MESG_COUNT;
    X_MSG_DATA := L_MESG;
    P_CALLING_FN := NULL;
    PX_ASSET_DESC_REC------------------------------------------------------
    PX_ASSET_DESC_REC.ASSET_NUMBER := 'XPRIA1100'; ---FA.ASSET_NUMBER;
    PX_ASSET_DESC_REC.DESCRIPTION := 'Xperia Mobile'; ---FA.DESCRIPTION;
    PX_ASSET_DESC_REC.ASSET_KEY_CCID := 2; ---FA.ASSET_KEY;
    PX_ASSET_DESC_REC.TAG_NUMBER := NULL; ---FA.TAG_NUMBER;
    PX_ASSET_DESC_REC.SERIAL_NUMBER := NULL; ---FA.SERIAL_NUMBER;
    PX_ASSET_DESC_REC.MANUFACTURER_NAME := NULL; ---FA.MANUFACTURER_NAME;
    PX_ASSET_DESC_REC.MODEL_NUMBER := NULL; ---FA.MODEL_NUMBER;
    PX_ASSET_DESC_REC.IN_USE_FLAG := 'YES'; ---FA.IN_USE_FLAG;
    PX_ASSET_DESC_REC.INVENTORIAL := 'YES'; ---FA.INVENTORIAL;
    PX_ASSET_DESC_REC.OWNED_LEASED := 'OWNED'; --FA.OWNED_LEASED;
    PX_ASSET_DESC_REC.NEW_USED := 'NEW'; ---FA.NEW_USED;
    PX_ASSET_DESC_REC.CURRENT_UNITS := '10'; ---FA.CURRENT_UNITS;
    PX_ASSET_CAT_REC-------------------------------------------------------
    PX_ASSET_CAT_REC.CATEGORY_ID := 21; ---FA.CATEGORY_ID;
    PX_ASSET_CAT_REC.DESC_FLEX.ATTRIBUTE1 := NULL; ---FA.ATTRIBUTE1;
    PX_ASSET_CAT_REC.DESC_FLEX.ATTRIBUTE2 := NULL; ---FA.ATTRIBUTE2;
    PX_ASSET_CAT_REC.DESC_FLEX.CONTEXT := 'COMPUTER-PC'; ---FA.CONTEXT;
    PX_ASSET_FIN_REC.COST := 2400; ---FA.COST;
    PX_ASSET_FIN_REC.ORIGINAL_COST := 2400; ---FA.ORIGINAL_COST;
    PX_ASSET_FIN_REC.SALVAGE_VALUE := NULL; ---FA.SALVAGE_VALUE;
    PX_ASSET_FIN_REC.DATE_PLACED_IN_SERVICE := SYSDATE; --- FA.DATE_PLACED_SRV;
    PX_ASSET_FIN_REC.DEPRECIATE_FLAG := NULL; ---FA.DEP_FLAG;
    PX_ASSET_FIN_REC.DEPRN_METHOD_CODE := NULL; ---FA.DEP_METHOD_CODE;
    PX_ASSET_FIN_REC.LIFE_IN_MONTHS := NULL; ---FA.LIFE_IN_MONTHS;
    PX_ASSET_DEPRN_REC.YTD_DEPRN := NULL; ---FA.YTD_DEP;
    PX_ASSET_DEPRN_REC.DEPRN_RESERVE := NULL; ---FA.DEP_RESERVE;
    PX_ASSET_HDR_REC.BOOK_TYPE_CODE := 'OPS CORP'; ---FA.BOOK_TYPE_CODE;
    PX_ASSET_DIST_REC.UNITS_ASSIGNED := NULL; ---FA.UNITS_ASSIGNED;
    PX_ASSET_DIST_REC.EXPENSE_CCID := NULL; ---FA.EXPENSE_CCID;
    PX_ASSET_DIST_REC.LOCATION_CCID := NULL; ---FA.LOCATION_CCID;
    PX_ASSET_DIST_REC.TRANSACTION_UNITS := NULL;
    --PX_ASSET_DIST_REC.UNITS_ASSIGNED;
    PX_ASSET_DIST_TBL (1) := PX_ASSET_DIST_REC;
    PX_INV_TBL (1) := PX_INV_REC;
    --l_inv_rec.source_line_id := i.source_line_id;
    PX_INV_REC.FIXED_ASSETS_COST := 2400; ---I.FIXED_ASSETS_COST;
    PX_INV_REC.PAYABLES_COST := 2400; ---I.PAYABLES_COST;
    PX_INV_REC.PAYABLES_CODE_COMBINATION_ID := NULL;
    ---I.PAYABLES_CODE_COMBINATION_ID;
    PX_INV_REC.INVOICE_NUMBER := NULL; ---I.INVOICE_NUMBER;
    PX_INV_REC.PO_NUMBER := NULL; ---I.PO_NUMBER;
    PX_INV_REC.UNREVALUED_COST := NULL; ---I.UNREVALUED_COST;
    PX_INV_REC.PROJECT_ID := NULL; ---I.PROJECT_ID;
    PX_INV_REC.TASK_ID := NULL; ---I.TASK_ID;
    PX_INV_REC.DELETED_FLAG := 'NO'; ---I.DELETED_FLAG;
    PX_INV_REC.DESCRIPTION := NULL; ---I.DESCRIPTION;
    PX_INV_REC.PO_VENDOR_ID := NULL; ---I.PO_VENDOR_ID;
    PX_INV_REC.AP_DISTRIBUTION_LINE_NUMBER := NULL;
    ---I.AP_DISTRIBUTION_LINE_NUMBER;
    PX_INV_REC.PAYABLES_UNITS := NULL; ---I.PAYABLES_UNITS;
    PX_INV_REC.INVOICE_ID := NULL; ---I.INVOICE_ID;
    PX_INV_REC.INVOICE_DATE := NULL; ---I.INVOICE_DATE;
    PX_ASSET_TYPE_REC------------------------------------------------------
    PX_ASSET_TYPE_REC.ASSET_TYPE := 'CAPITALIZED'; ---FA.ASSET_TYPE;
    PX_INV_TRANS_REC.TRANSACTION_TYPE := 2; ---TRANSACTION_TYPE_CODE;
    -- PX_DIST_TRANS_REC := NULL; Modify the code to initialize this parameter
    -- PX_ASSET_TYPE_REC := NULL; Modify the code to initialize this parameter
    -- PX_ASSET_HIERARCHY_REC := NULL; Modify the code to initialize this parameter
    -- PX_ASSET_FIN_REC := NULL; Modify the code to initialize this parameter
    -- PX_ASSET_DEPRN_REC := NULL; Modify the code to initialize this parameter
    -- PX_ASSET_DIST_TBL := NULL; Modify the code to initialize this parameter
    APPS.FA_ADDITION_PUB.DO_ADDITION (P_API_VERSION
    , P_INIT_MSG_LIST
    , P_COMMIT
    , P_VALIDATION_LEVEL
    , X_RETURN_STATUS
    , X_MSG_COUNT
    , X_MSG_DATA
    , P_CALLING_FN
    , PX_TRANS_REC
    , PX_DIST_TRANS_REC
    , PX_ASSET_HDR_REC
    , PX_ASSET_DESC_REC
    , PX_ASSET_TYPE_REC
    , PX_ASSET_CAT_REC
    , PX_ASSET_HIERARCHY_REC
    , PX_ASSET_FIN_REC
    , PX_ASSET_DEPRN_REC
    , PX_ASSET_DIST_TBL
    , PX_INV_TBL
    , PX_INV_RATE_TBL
    -- END LOOP;
    LV_COUNT := LV_COUNT + 1;
    COMMIT;
    DBMS_OUTPUT.PUT_LINE ( X_RETURN_STATUS
    || ' - '
    || X_MSG_COUNT
    || ' - '
    || X_MSG_DATA
    L_MESG := 'FAILED (' || SQLERRM || '): ' || L_MESG;
    END;
    it returns with a message ( E - 1 - OFA )
    which is not descriptive at all

  • Failed to open the console and System Center Data Access Service wont start - SCOM 2012

    Log Name: Operations Manager
    Source: Data AccessLayer
    Event ID: 33333
    Data Access Layer rejected retry on SqlError:
     Request: ManagementGroupInfo
     Class: 16
     Number: 208
     Message: Invalid object name 'dbo.__MOMManagementGroupInfo__'.
    =============================================================
    Log Name: Operations Manager
    Source: OpsMgr SDK Service
    Event ID: 26380
    The System Center Data Access service failed due to an unhandled exception.  
    The service will attempt to restart.
    Exception:
    Microsoft.EnterpriseManagement.Common.SdkServiceNotInitializedException: The Data Access service has not yet initialized. Please try again.
       at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.get_Container()
       at Microsoft.EnterpriseManagement.Mom.Sdk.Service.SdkSubService.SdkChannel.Start()
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
    =============================================================
    Failed to connect to server ' xxxxx'
    Date: 16/09/2013 20:36:16
    Application: Operations Manager
    Application Version: 7.0.8560.0
    Severity: Error
    Message: Failed to connect to server 'xxxxxx'
    Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. ---> System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://xxxxx:5724/DispatcherService.
    The connection attempt lasted for a time span of 00:00:02.0020300. TCP error code 10061: No connection could be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724.  ---> System.Net.Sockets.SocketException: No connection could
    be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724
       at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
       at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
       at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
       --- End of inner exception stack trace ---
    Server stack trace:
       at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
       at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
       at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
       at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
       at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
       at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
    Exception rethrown at [0]:
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
       --- End of inner exception stack trace ---
       at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
       at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
       at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.ManagementGroupSessionManager.Connect(String server)
       at Microsoft.EnterpriseManagement.Monitoring.Console.Internal.ConsoleWindowBase.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
    System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://xxxxx:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0020300. TCP error code 10061: No connection could be made because the target machine actively
    refused it xxx.xxx.xxx.xxx:5724.  ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724
       at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
       at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
       at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
       --- End of inner exception stack trace ---
    Server stack trace:
       at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
       at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
       at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
       at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
       at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
       at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
    Exception rethrown at [0]:
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
    System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724
       at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
       at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
       at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
    =============================================================
    Log Name: Operations Manager
    Source: OpsMgr Root Connector
    Event ID: 28001
    The Root connector received an exception from the Config Service on StateSyncRequest:
    System.Runtime.Remoting.RemotingException: Failed to connect to an IPC Port: The system cannot find the file specified.
    Server stack trace:
       at System.Runtime.Remoting.Channels.Ipc.IpcPort.Connect(String portName, Boolean secure, TokenImpersonationLevel impersonationLevel, Int32 timeout)
       at System.Runtime.Remoting.Channels.Ipc.ConnectionCache.GetConnection(String portName, Boolean secure, TokenImpersonationLevel level, Int32 timeout)
       at System.Runtime.Remoting.Channels.Ipc.IpcClientTransportSink.ProcessMessage(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream, ITransportHeaders& responseHeaders, Stream& responseStream)
       at System.Runtime.Remoting.Channels.BinaryClientFormatterSink.SyncProcessMessage(IMessage msg)
    Exception rethrown at [0]:
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at Microsoft.EnterpriseManagement.Mom.Internal.IConfigService.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
       at Microsoft.Mom.Connectors.Root.RootConnector.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
    ================================================================
    Log Name: Operations Manager
    Source: OpsMgr Management Configuration
    Event ID: 29105
     The management group is not yet fully upgraded. OpsMgr Management Configuration Service will idle until upgrade is completed.
     Operations Manager database version: 1.0.0.0
     Minimum required version: 7.0.0.0

    Yes, i change the credentials, but doesnt work.
    Yes, i put the events in the
    main question!
    Events Logs:
    =======================================================
    Log Name: Operations Manager
    Source: Data AccessLayer
    Event ID: 33333
    Data Access Layer rejected retry on SqlError:
     Request: ManagementGroupInfo
     Class: 16
     Number: 208
     Message: Invalid object name 'dbo.__MOMManagementGroupInfo__'.
    =======================================================
    Log Name: Operations Manager
    Source: OpsMgr SDK Service
    Event ID: 26380
    The System Center Data Access service failed due to an unhandled exception.  
    The service will attempt to restart.
    Exception:
    Microsoft.EnterpriseManagement.Common.SdkServiceNotInitializedException: The Data Access service has not yet initialized. Please try again.
       at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.get_Container()
       at Microsoft.EnterpriseManagement.Mom.Sdk.Service.SdkSubService.SdkChannel.Start()
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
    =======================================================
    Log Name: Operations Manager
    Source: OpsMgr Root Connector
    Event ID: 28001
    The Root connector received an exception from the Config Service on StateSyncRequest:
    System.Runtime.Remoting.RemotingException: Failed to connect to an IPC Port: The system cannot find the file specified.
    Server stack trace:
       at System.Runtime.Remoting.Channels.Ipc.IpcPort.Connect(String portName, Boolean secure, TokenImpersonationLevel impersonationLevel, Int32 timeout)
       at System.Runtime.Remoting.Channels.Ipc.ConnectionCache.GetConnection(String portName, Boolean secure, TokenImpersonationLevel level, Int32 timeout)
       at System.Runtime.Remoting.Channels.Ipc.IpcClientTransportSink.ProcessMessage(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream, ITransportHeaders& responseHeaders, Stream& responseStream)
       at System.Runtime.Remoting.Channels.BinaryClientFormatterSink.SyncProcessMessage(IMessage msg)
    Exception rethrown at [0]:
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at Microsoft.EnterpriseManagement.Mom.Internal.IConfigService.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
       at Microsoft.Mom.Connectors.Root.RootConnector.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
    =======================================================
    Log Name: Operations Manager
    Source: OpsMgr Management Configuration
    Event ID: 29105
     The management group is not yet fully upgraded. OpsMgr Management Configuration Service will idle until upgrade is completed.
     Operations Manager database version: 1.0.0.0
     Minimum required version: 7.0.0.0

  • No organization data for service products

    Hi,
    I create a CRM service order with a service product. Now there is a message, that the product in sales organization and distribution channel is not scheduled.
    Our service products in general don't have organization data, cause they occur from r/3 service master data (transaction ac03).
    How to assign org.data to service products in CRM? I cannot assign the set type for org.data to the category of service products cause we download the products with the middleware from R/3.
    Regards
    Jochen

    Hi
    Sercie products will be created in CRM in service product type, while creating a service product you have to assign the Organizational data in sales and distribution tab
    Thanks
    Satheesh

Maybe you are looking for

  • SAP LSO Course Evaluatio Form format in LSO_PV15

    Hi, We have a requirement from client about Course Evaluation Form. - When we open the course evaluation form in T.Code PHAP_CATALOG or in the learning portal the format is displayed in PDF or smart form. - When the course administrator opens the sam

  • Integrate other directory servers with access manager

    How to integrate other directory servers with access manager ?

  • Install Application without Internet

    Hello, Whenever I choose to install an application from Ovi Suite. I get a message in my phone with the URL. The problem is that my mobile does not have internet. So I cannot open the URL from my mobile. How do I install the application then ?? Regar

  • Dock items when is it too much?

    Too many dock items will make your system slow down operating?

  • MY APPLE ID disabled

    Today, I was surprised by having this message " your apple ID is disabled " it's shocking and need to reactivate my ID