Date interval issue
Hi Experts,
I am facing an issue with Date Interval in BO report. We are using BICS connection and the date interval format we are receiving in BO is
dd-mm-yyyy hh:mm:ss a : dd-mm-yyyy hh:mm:ss a
eg: 01-01-2013 12:05:06 AM : 12-12-2013 10:06:05 PM
I would like the display format for the date prompt in BO to be 01-01-2013 - 12-12-2013
Please give your valuable solutions for this issue.
Regards,
G.
Hi
You can request your BW team to change the data format in the bex Q according to BO,
Coz your using BICS connection and there is no universe, so request your BW
team to change the format.
Coz some calculations,filtering, formats which are done at universe or report level could be pushed down to database level (without the need to actually
modify the database).
This has advantages, final users have less work to do.
Similar Messages
-
Windows 8.1 Data reordering issue with Intel Adaptors
According to Intel, there is a data reordering issue with their adaptors and probably this dumb WIDI software. This is from Intel site. they say some are fixed, "A future Windows 8 fix will address this issue for other Intel wireless adapters." I
have one Nope, still broke. I get drops all the time. Brand new Toshiba laptop I7 16 gigs of ram and a SSD and a 2 gig Vid card. Would be nice to be able to play games but I get dropped all the time. Now would Microsoft quit hiding
about this, and fix the darn thing. Also i'm a system admin for 13 years. I have build over 1000 PCs and servers. I know bad software. Please fix this. PLEASE. Its not going to just go away and its not just Toshiba, I have seen other companies with the
same problem. If there is a Fix PLEASE POST IT. Or even a workaround I have tried everything.
http://www.intel.com/support/wireless/wlan/sb/CS-034535.htm
Hi,
Have your first tried the software fix under this link for your network adapter?
http://www.intel.com/support/wireless/wtech/proset-ws/sb/CS-034041.htm
Please Note: The third-party product discussed here is manufactured by a company that is independent of Microsoft. We make no warranty, implied or otherwise, regarding this product's performance or reliability.
Also, you can try to check if there is any driver update under Device manager from manufacture's website.
Kate Li
TechNet Community Support
Yep didn't work. Still get drops all the time, had to run a Cat 5E cable to my laptop from my modem, because I have Atheros Gigabyte Lan adaptor. Works Great. The Wireless still drops all the time. Has Microsoft let out the patch to fix this or is it coming in
April in the 8.1 patch that's coming. Funny thing is all for Widi, I don't even use widi, I got the software to do that from Samsung works better on my TV. Intel and Microsoft need to get this fixed. because their driving off gamers and that's the
people that make sure they buy Microsoft so they can play games. With the wireless link dead and a great laptop worthless what's the point. Ive been in IT for 13 years building PCs and Servers how I knew how to run a 60 FT Cat 5e line thru
a 2 story house and terminate it. Most people don't. Fix the problem. -
Data Load Issue "Request is in obsolete version of DataSource"
Hello,
I am getting a very strange data load issue in production, I am able to load the data upto PSA, but when I am running the DTP to load the data into 0EMPLOYEE ( Master data Object) getting bellow msg
Request REQU_1IGEUD6M8EZH8V65JTENZGQHD not extracted; request is in obsolete version of DataSource
The request REQU_1IGEUD6M8EZH8V65JTENZGQHD was loaded into the PSA table when the DataSource had a different structure to the current one. Incompatible changes have been made to the DataSource since then and the request cannot be extracted with the DTP anymore.
I have taken the follwoing action
1. Replicated the data source
2. Deleted all request from PSA
2. Activated the data source using (RSDS_DATASOURCE_ACTIVATE_ALL)
3. Re transported the datasource , transformation, DTP
Still getting the same issue
If you have any idea please reply asap.
SamitHi
Generate your datasource in R/3 then replicate and activate the transfer rules.
Regards,
Chandu. -
Hi,
Im very new to streams and having a doubt regarding ORA-01403 issue happening while replication. Need you kind help on this regard. Thanks in advance.
Oracle version : 10.0.3.0
1.Suppose there are 10 LCRs in a Txn and one of the LCR caused ORA-01403 and none of the LCRs get executed.
We can read the data of this LCR and manually update the record in the Destination database.
Eventhough this is done, while re-executing the transaction, im getting the same ORA-01403 on the same LCR.
What could be the possible reason.
Since, this is a large scale system with thousands of transactions, it is not possible to handle the No data found issues occuring in the system.
I have written a PL/SQL block which can generate Update statements with the old data available in LCR, so that i can re-execute the Transaction again.
The PL/SQL block is given below. Could you please check if there are any issues in this while generating the UPDATE statements. Thank you
/* Formatted on 2008/10/23 14:46 (Formatter Plus v4.8.7) */
--Script for generating the Update scripts for the Message which caused the 'NO DATA FOUND' error.
DECLARE
RES NUMBER; --No:of errors to be resolved
RET NUMBER; --A number variable to hold the return value from getObject
I NUMBER; --Index for the loop
J NUMBER; --Index for the loop
K NUMBER; --Index for the loop
PK_COUNT NUMBER; --To Hold the no:of PK columns for a Table
LCR ANYDATA; --To Hold the Logical Change Record
TYP VARCHAR2 (61); --To Hold the Type of a Column
ROWLCR SYS.LCR$_ROW_RECORD; --To Hold the LCR caused the error in a Txn.
OLDLIST SYS.LCR$_ROW_LIST; --To Hold the Old data of the Record which was tried to Update/Delete
NEWLIST SYS.LCR$_ROW_LIST;
UPD_QRY VARCHAR2 (5000);
EQUALS VARCHAR2 (5) := ' = ';
DATA1 VARCHAR2 (2000);
NUM1 NUMBER;
DATE1 TIMESTAMP ( 0 );
TIMESTAMP1 TIMESTAMP ( 3 );
ISCOMMA BOOLEAN;
TYPE TAB_LCR IS TABLE OF ANYDATA
INDEX BY BINARY_INTEGER;
TYPE PK_COLS IS TABLE OF VARCHAR2 (50)
INDEX BY BINARY_INTEGER;
LCR_TABLE TAB_LCR;
PK_TABLE PK_COLS;
BEGIN
I := 1;
SELECT COUNT ( 1)
INTO RES
FROM DBA_APPLY_ERROR;
FOR TXN_ID IN
(SELECT MESSAGE_NUMBER,
LOCAL_TRANSACTION_ID
FROM DBA_APPLY_ERROR
WHERE LOCAL_TRANSACTION_ID =
'2.85.42516'
ORDER BY ERROR_CREATION_TIME)
LOOP
SELECT DBMS_APPLY_ADM.GET_ERROR_MESSAGE
(TXN_ID.MESSAGE_NUMBER,
TXN_ID.LOCAL_TRANSACTION_ID
INTO LCR
FROM DUAL;
LCR_TABLE (I) := LCR;
I := I + 1;
END LOOP;
I := 0;
K := 0;
dbms_output.put_line('size >'||lcr_table.count);
FOR K IN 1 .. RES
LOOP
ROWLCR := NULL;
RET :=
LCR_TABLE (K).GETOBJECT
(ROWLCR);
--dbms_output.put_line(rowlcr.GET_OBJECT_NAME);
PK_COUNT := 0;
--Finding the PK columns of the Table
SELECT COUNT ( 1)
INTO PK_COUNT
FROM ALL_CONS_COLUMNS COL,
ALL_CONSTRAINTS CON
WHERE COL.TABLE_NAME =
CON.TABLE_NAME
AND COL.CONSTRAINT_NAME =
CON.CONSTRAINT_NAME
AND CON.CONSTRAINT_TYPE = 'P'
AND CON.TABLE_NAME =
ROWLCR.GET_OBJECT_NAME;
dbms_output.put_line('Count of PK Columns >'||pk_count);
DEL_QRY := NULL;
DEL_QRY :=
'DELETE FROM '
|| ROWLCR.GET_OBJECT_NAME
|| ' WHERE ';
INS_QRY := NULL;
INS_QRY :=
'INSERT INTO '
|| ROWLCR.GET_OBJECT_NAME
|| ' ( ';
UPD_QRY := NULL;
UPD_QRY :=
'UPDATE '
|| ROWLCR.GET_OBJECT_NAME
|| ' SET ';
OLDLIST :=
ROWLCR.GET_VALUES ('old');
-- Generate Update Query
NEWLIST :=
ROWLCR.GET_VALUES ('old');
ISCOMMA := FALSE;
FOR J IN 1 .. NEWLIST.COUNT
LOOP
IF NEWLIST (J) IS NOT NULL
THEN
IF J <
NEWLIST.COUNT
THEN
IF ISCOMMA =
TRUE
THEN
UPD_QRY :=
UPD_QRY
|| ',';
END IF;
END IF;
ISCOMMA := FALSE;
TYP :=
NEWLIST
(J).DATA.GETTYPENAME;
IF (TYP =
'SYS.VARCHAR2'
THEN
RET :=
NEWLIST
(J
).DATA.GETVARCHAR2
(DATA1
IF DATA1 IS NOT NULL
THEN
UPD_QRY :=
UPD_QRY
|| NEWLIST
(J
).COLUMN_NAME;
UPD_QRY :=
UPD_QRY
|| EQUALS;
UPD_QRY :=
UPD_QRY
|| ' '
|| ''''
|| SUBSTR
(DATA1,
0,
253
|| '''';
ISCOMMA :=
TRUE;
END IF;
ELSIF (TYP =
'SYS.NUMBER'
THEN
RET :=
NEWLIST
(J
).DATA.GETNUMBER
(NUM1
IF NUM1 IS NOT NULL
THEN
UPD_QRY :=
UPD_QRY
|| NEWLIST
(J
).COLUMN_NAME;
UPD_QRY :=
UPD_QRY
|| EQUALS;
UPD_QRY :=
UPD_QRY
|| ' '
|| NUM1;
ISCOMMA :=
TRUE;
END IF;
ELSIF (TYP =
'SYS.DATE'
THEN
RET :=
NEWLIST
(J
).DATA.GETDATE
(DATE1
IF DATE1 IS NOT NULL
THEN
UPD_QRY :=
UPD_QRY
|| NEWLIST
(J
).COLUMN_NAME;
UPD_QRY :=
UPD_QRY
|| EQUALS;
UPD_QRY :=
UPD_QRY
|| ' '
|| 'TO_Date( '
|| ''''
|| DATE1
|| ''''
|| ', '''
|| 'DD/MON/YYYY HH:MI:SS AM'')';
ISCOMMA :=
TRUE;
END IF;
ELSIF (TYP =
'SYS.TIMESTAMP'
THEN
RET :=
NEWLIST
(J
).DATA.GETTIMESTAMP
(TIMESTAMP1
IF TIMESTAMP1 IS NOT NULL
THEN
UPD_QRY :=
UPD_QRY
|| ' '
|| ''''
|| TIMESTAMP1
|| '''';
ISCOMMA :=
TRUE;
END IF;
END IF;
END IF;
END LOOP;
--Setting the where Condition
UPD_QRY := UPD_QRY || ' WHERE ';
FOR I IN 1 .. PK_COUNT
LOOP
SELECT COLUMN_NAME
INTO PK_TABLE (I)
FROM ALL_CONS_COLUMNS COL,
ALL_CONSTRAINTS CON
WHERE COL.TABLE_NAME =
CON.TABLE_NAME
AND COL.CONSTRAINT_NAME =
CON.CONSTRAINT_NAME
AND CON.CONSTRAINT_TYPE =
'P'
AND POSITION = I
AND CON.TABLE_NAME =
ROWLCR.GET_OBJECT_NAME;
FOR J IN
1 .. NEWLIST.COUNT
LOOP
IF NEWLIST (J) IS NOT NULL
THEN
IF NEWLIST
(J
).COLUMN_NAME =
PK_TABLE
(I
THEN
UPD_QRY :=
UPD_QRY
|| ' '
|| NEWLIST
(J
).COLUMN_NAME;
UPD_QRY :=
UPD_QRY
|| ' '
|| EQUALS;
TYP :=
NEWLIST
(J
).DATA.GETTYPENAME;
IF (TYP =
'SYS.VARCHAR2'
THEN
RET :=
NEWLIST
(J
).DATA.GETVARCHAR2
(DATA1
UPD_QRY :=
UPD_QRY
|| ' '
|| ''''
|| SUBSTR
(DATA1,
0,
253
|| '''';
ELSIF (TYP =
'SYS.NUMBER'
THEN
RET :=
NEWLIST
(J
).DATA.GETNUMBER
(NUM1
UPD_QRY :=
UPD_QRY
|| ' '
|| NUM1;
END IF;
IF I <
PK_COUNT
THEN
UPD_QRY :=
UPD_QRY
|| ' AND ';
END IF;
END IF;
END IF;
END LOOP;
END LOOP;
UPD_QRY := UPD_QRY || ';';
DBMS_OUTPUT.PUT_LINE (UPD_QRY);
--Generate Update Query - End
END LOOP;
END;Thanks for you replies HTH and Dipali.
I would like to make some points clear from my side based on the issue i have raised.
1.The No Data Found error is happening on a table for which supplemental logging is enabled.
2.As per my understanding, the "Apply" process is comparing the existing data in the destination database with the "Old" data in the LCR.
Once there is a mismatch between these 2, ORA-01403 is thrown. (Please tell me whether my understanding is correct or not)
3.This mismatch can be on date field or even on the timestamp millisecond as well.
Now, the point im really wondering about :
Some how a mismatch got generated in the destination database (Not sure about the reason) and ORA-01403 is thrown.
If we could update the Destination database with the "Old" data from LCR, this mismatch should be resolved isnt it?
Reply to you Dipali :
If nothing is working out, im planning to put a conflict handler for all tables with "OVERWRITE" option. With the following script
--Generate script for applying Conflict Handler for the Tables for which Supplymentary Logging is enabled
declare
count1 number;
query varchar2(500) := null;
begin
for tables in (
select table_name from user_tables where table_name IN ("NAMES OF TABLES FOR WHICH SUPPLEMENTAL LOGGING IS ENABLED")
loop
count1 := 0;
dbms_output.put_line('DECLARE');
dbms_output.put_line('cols DBMS_UTILITY.NAME_ARRAY;');
dbms_output.put_line('BEGIN');
select max(position) into count1
from all_cons_columns col, all_constraints con
where col.table_name = con.table_name
and col.constraint_name = con.constraint_name
and con.constraint_type = 'P'
and con.table_name = tables.table_name;
for i in 1..count1
loop
query := null;
select 'cols(' || position || ')' || ' := ' || '''' || column_name || ''';'
into query
from all_cons_columns col, all_constraints con
where col.table_name = con.table_name
and col.constraint_name = con.constraint_name
and con.constraint_type = 'P'
and con.table_name = tables.table_name
and position = i;
dbms_output.put_line(query);
end loop;
dbms_output.put_line('DBMS_APPLY_ADM.SET_UPDATE_CONFLICT_HANDLER(');
dbms_output.put_line('object_name => ''ICOOWR.' || tables.table_name|| ''',');
dbms_output.put_line('method_name => ''OVERWRITE'',');
dbms_output.put_line('resolution_column => ''COLM_NAME'',');
dbms_output.put_line('column_list => cols);');
dbms_output.put_line('END;');
dbms_output.put_line('/');
dbms_output.put_line('');
end loop;
end;
Reply to u HTH :
Our Destination database is a replica of the source and no triggers are running on any of these tables.
This is not the first time im facing this issue. Earlier, we had to take big outage times and clear the Replica database and apply the dump from the source...
Now i cant think about that situation. -
4G LTE data reception issue in area of work building
Hi, I'm having a data reception issue in a certain area at work. The signal indicator at the upper right of the homescreen shows "4GLTE" but this is clearly inaccurate since I am not able to navigate to websites or send/receive multimedia messages. If I move ~30 feet east in the building, the reception is restored. Two people with iPhone 5 devices have the same issue. However, the Verizon iPhone 5 allows you to turn off LTE. Once this was done and the signal fell back to 3G, reception was restored, albeit with slower speeds, but at least reception wasn't completely blocked. I understand 4G is not available in all areas, but in this case, the phone is not automatically switching to 3G and there is no workaround because there is no option to turn off LTE on the Z10. In the "Settings" -> "Network Connections" -> "Mobile Network" -> "Network Technology" dropdown, the only values are:
UMTS/GSM (when I switch to this, no networks are found)
Global (the current selection)
LTE/CDMA
This is a big problem for me because for 8+ hours in the day I can't receive MMS messages or navigate to websites.Hi, Nate650,
Sorry to hear about your problem with 4G. First, let me ask, have you updated your Z10 to the latest official software version? I had a similar problem with my Z10. After about an hour on the phone with CS, we figured out it was a problem with the tower near me. The problem was fixed by VZW and I have not had connection issues. You are right, though, about the Z10 falling back to 3G. Mine did before the update but not since.
Doc -
Logical Standby Data Consistency issues
Hi all,
We have been running a logical standby instance for about three weeks now. Both our primary and logical are 11g (11.1.0.7) databases running on Sun Solaris.
We have off-loaded our Discoverer reporting to the logical standby.
About three days ago, we started getting the following error message (initially for three tables, but from this morning on a whole lot more)
ORA-26787: The row with key (<coulmn>) = (<value>) does not exist in table <schema>.<table>
This error implies that we have data consistency issues between our primary and logical standby databases, but we find that hard to believe
because the "data guard" status is set to "standby", implying that schemas' being replicated by data guard are not available for user modification.
any assistance in this regard would be greatly appreciated.
thanks
MelIt is a bug : Bug 10302680 . Apply the corresponding Patch 10302680 to your standby db.
-
How to get material's last posting date of issuing to production order?
Hi,
In my scenario, I need to get material's last posting date of issuing to production order (e.g. mov. typ. 261).
I tried to select the material documents whose movement type is 261, and restrict the posting date from month to month each time, until the first material document is selected.
But this method seems quite inefficient.
What kind of algorithm is more effient to do this?
Thanks
WesleyHi,
select max( budat )
from mkpf
into gv_budat
where mblnr in ( select mblnr
from aufm
where aufnr = gv_aufnr "(Prod. Order)
and matnr = gv_matnr "(Issued Material)
and bwart = '261' ).
Edited by: Azeem Ahmed Matte on Mar 12, 2010 12:33 PM -
How to get the previous state of my data after issuing coomit method
How to get the previous state of some date after issuing commit method in entity bean (It should not use any offline storage )
>
Is there any way to get the state apart from using
offline storage ?As I said the caller keeps a copy in memory.
Naturally if it is no longer in memory then that is a problem.
>
and also what do you mean by auditlog?
You keep track of every change to the database by keeping the old data. There are three ways:
1. Each table has a version number/delete flag for each record. A record is never updated nor deleted. Instead a new record is created with a new version number and with the new data.
2. Each table has a duplicate table which has all of the same columns. When the first table is modified the old data is moved to the duplicate table.
3. A single table is used which has columns for 'table', 'field', 'data' and 'activity' (update, delete). When a change is made in any table then this table is updated. This is generally of limited useability due to the difficulty in recovering the data.
All of the above can have a user id, timestamp, and/or additional information which is relevant to the data being changed.
Note that ALL of this is persisted storage.
I am not sure what this really has to do with "offline storage" unless you are using that term to refer to backed up data which is not readily available. -
Has anyone found a solution for iPhone 5 data leak issues?
Up until about a week ago I was using a 3GS and the data leak issues seemed to be fixed with the newest iOS 6 update. However, I recently got an iPhone 5 and I've noticed it uses around 1 MB per hour no matter what I'm actually doing on the phone. I actually went to sleep last night, turning of cellular data AND wifi and it STILL used about 4 MB of data!! What is up with this?? I am a pretty conservative user of data when not on wifi, but I'm only 2 days in to my bill cycle and already on pace to go over my 2 GB limit by the end of the month. Please help! I do not want to switch my plan and play more! I am on AT&T by the way.
Have you tried these basic troubleshooting steps?
Restart / Reset
http://support.apple.com/en-us/HT201559
Restore from backup
Restore as new
http://support.apple.com/en-us/HT201252
If no joy, make an appointment with the Apple genius bar for an evaluation. -
Date difference is not showing the correct result for date interval
Hi Expert,
I've created two formula variable one for PO date and another for GR date
while i am taking the date difference of GR and PO date for single PO date selection
it showing me correct result , but while i am taking the date interval for PO date it not
showing the correct result.
eg: PO date: 01.01.2010 for a particular PO and Gr date is suppose 03.01.2010, 06.01.2010
it showing the result 2 and 5.
But if i am taking date interval for PO date:
eg: 01.01.2010 - 31.01.2010
PO date: 10.01.2010 and GR date are suppose 15.01.2010, 22.01.2010 and 30.01.2010
it showing me 14, 21 and 29
Thanks and Regards
Lalit KumarHi Expert,
Through replacement path.
Thanks and Regards
Lalit Kumar -
I am having an issue where the data that drives a tilelist
works correctly when the tile list is not loaded on the first page
of the application. When it is put on a second page in a viewstack
then the tilelist displays correctly when you navigate to it. When
the tilelist is placed in the first page of the application I get
the correct number of items to display in the tilelist but the
information the item renderer is supposed to display, ie a picture,
caption and title, does not. The strange thing is that a Tree
populates correctly given the same situation. Here is the sequence
of events:
// get tree is that data for the tree and get groups is the
data for the tilelist
creationComplete="get_tree.send();get_groups.send();"
<mx:HTTPService showBusyCursor="true" id="get_groups"
url="[some xml doc]" resultFormat="e4x"/>
<mx:XMLListCollection id="myXMlist"
source="{get_groups.lastResult.groups}"/>
<mx:HTTPService showBusyCursor="true" id="get_tree"
url="[some xml doc]" resultFormat="e4x" />
<mx:XMLListCollection id="myTreeXMlist"
source="{get_tree.lastResult.groups}"/>
And then the data provider of the tilelist and tree are set
accordingly. I tried putting moving the data calls from the
creation complete to the initialize event thinking that it would
hit earlier in the process and be done by the time the final
completion came about but that didn't help either. I guess I'm just
at a loss as to why the tree works fine no matter where I put it
but the TileList does not. It's almost like the tree and the
tilelist will sit and wait for the data but the item renderer in
the tilelist will not wait. Which would explain why clicking on the
tile list still produces the correct sequence of events but the
visual component of the tilelist is just not working right. Anyone
have any ideas?Ok, so if ASO value is wrong, then its a data load issue and no point messing around with the BSO app. You are loading two transactions to the exact same intersection. Make sure your data load is set to aggregate values and not overwrite.
-
I am using Iphone 4 for past 2 years in India on Dococmo Network, since after the update of IOS 5 and 5.0.1 I
am FAcing the frequent Data loss in Mobile...!!
Time beign i can over come it by turing off the cellular connetion to on and off mode where it resetting the data connection...!!!Since you haven't bothered to describe what this mysterious "data connection issue" is, we have no way to confirm or deny your statement that the problem is widespread.
The fact remains, you're using it on an unsupported carrier.
If you'd like to try and describe WHAT THE PROBLEM IS instead of getting defensive about it, we might be able to help. Otherwise, your initial question has been answered. No one here can tell you when the next update to iOS will be released. -
Revision: 1543
Author: [email protected]
Date: 2008-05-02 15:32:59 -0700 (Fri, 02 May 2008)
Log Message:
Bug: BLZ-152-lcds custom Date serialization issue - need to add java.io.Externalizable as the first type tested in AMF writeObject() functions
QA: Yes - please check that the fix is working with AMF3 and AMFX and you can turn on/off the fix with the config option.
Doc: No
Checkintests: Pass
Details: The problem in this case was that MyDate.as was serialized to MyDate.java on the server but on the way back, MyDate.java was serialized back to Date.as. As the bug suggests, added an Externalizable check in AMF writeObject functions. However, I didn't do this for AMF0Output as AMF0 does not support Externalizable. To be on the safe side, I also added legacy-externalizable option which is false by default but when it's true, it restores the current behavior.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-152
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/endpoints/AbstractEndpoint.ja va
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/io/SerializationContext.java
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/io/amf/Amf3Output.java
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/io/amfx/AmfxOutput.java
blazeds/branches/3.0.x/resources/config/services-config.xml -
Hi Experts,
why the delivery date is the same date as ‘transptn plan date” & loading date’ & ‘ good issue’ & GR end date’.
in shipping tab i can see Planned Deliv. Time 170 Days ... wat could be the reason.
Many Thanks:
Raj KashyapHi Jurgen,,
Thanks for quick reply!!
But i didnot find any things like that .. what could be the customizing .. and we are using GATP from APO side.
\Raj Kashyap -
Date interval should be there in name of the report through Bex
Hi,
I have a requirement in which customer wants to see the date interval with the name of the report which they are using in selection screen.
Can anyone please tell me how i can do it in BEx query.
RomaHi ,
You can achive the same by using the Text variable in the description of the report .This variable will take the input from other variable whose value is entere by the user in the selection screen
For doing the same please refer to the below document :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/25d98cf6-0d01-0010-0e9b-edcd4597335a?QuickLink=index&overridelayout=true
Check and update accordingly later .
Thanks
Kamal
Maybe you are looking for
-
Can I do this with Automator?
Hi, Sorry for the newb question. I want to create a macro that will let me do the following: 1. Open System Preferences 2. Select "Sound" I'd be happy if it just that; however, if it would switch to built-in "headphone" port for the output, that woul
-
Delete regions items buttons and pages using sql.
Hi, Is there any way to delete from apex pages, regions, items and buttons using sql. I noted that in SQL Developer a display of these objects is enabled, but no actions can be carried out on them from what I can see. Ben
-
I just purchased Final Cut Studio today. I'm going through the tutorial and my files won't save in the folders created for the tutorial on my HD. I go to "send to" for Motion and Motion opens and asks for a data rate. Then when i choose one Motion op
-
Missing "plus" sign within CONTACTS
I upgraded my wife's iPhone 3GS to iOS5; now the "plus" sign is missing under CONTACTS. I've tried to RESTORE; tried just about everything. She can add a number/contact after she's called it - but not from the CONTACTS App.
-
ST22 - 'IMPORT_DECOMPRESS_FAILED'
Hello All When running a simple qry, the data comes back relativly quiclkly, however when going into ST22 it shows that it has been short dumped. Name of error : 'IMPORT_DECOMPRESS_FAILED' Exception: CX_SY_COMPRESSION ERROR WP INDEX: 26 Much appricia