Date is not getting populated soon after a change in a field which has LOV.

Hi friends,
I have a requirement in my form......
I have a two fields, in my form......
One field which has a LOV's list---------------> the name of the field is "PRIORITY" and it has following LOV's
*) LOW *) MEDIUM *) HIGH..
Second field is of date field-----------------> the name of the field is "DUEDATE"....
I needed is that soon after i select anyone of values from the list in "PRIORITY" column for example assume it has "LOW"...
The due date column should automatically populate the date, accordingly that is setted for LOW..
The same is in case of "MEDIUM" and "HIGH"....
How it is possible to populate the date accordingly soon after i picked one of the LOV's from the priority column...
Whether i need to set any dynamic actions for the due date column...or else....if so means......
guide me friends..in stepwise manner......whether to write any query in back end....
i also tried with query it didnt worked.......
regards,
Harry......

Hi,
If i gave the query that i mentioned above post, in my sql statement, the dynamic action is working but not fetching the correct date for the selected priority..
what is the answer that im getting is
When i select priority as low means
what is populating in my due date field is not the date im expecting........
it is giving some thing in the due date field like the below i mentioned.......
" ,,11/10/10 0&#58;0&#58;0,11/10/10 0&#58;0&#58;0,,,,,,,,,,11/24/10 0&#58;0&#58;0,11/24/10 0&#58;0&#58;0,,,,,,,,,,,11/04/10 0&#58;0&#58;0,,,,,,,11/24/10 0&#58;0&#58;0,,,,,,,,,,,,,,,,,,,11/18/10 0&#58;0&#58;0,,,,,,11/24/10 0&#58;0&#58;0,,,11/24/10 0&#58;0&#58;0,11/24/10 0&#58;0&#58;0,,,,11/27/10 0&#58;0&#58;0,11/26/10 0&#58;0&#58;0,,,,,,,11/05/10 0&#58;0&#58;0,,,,11/24/10 0&#58;0&#58;0,11/24/10 0&#58;0&#58;0,,,,,,,,,,,11/19/10 0&#58;0&#58;0,11/05/10 0&#58;0&#58;0,11/24/10 0&#58;0&#58;0"
i dont know why it is returning like this......please help me........
Regards,]
Harry......

Similar Messages

Newly added field in the data Source not getting populated

Hello All,
We have added few fields in the Data Source. The Data Source is based on the InfoSet. We have included the field in the Infoset and have updated the code to fetch the value for the newly added fields.
When we perform the test extraction for this Data Source in RSA3, the newly added fields are not getting populdated with the value. In the system generated query's selection list, the newly added fields are not selected.
Please let mw know how to get the newly added field selected in the system generated query of the infoset.
Regards,
-Purnima

Hi,
As you said you have added the filed in Info Set. Have you included the same in data source? try if not.
If you are trying to create a query in source system to check the data. I guess in R/3 (ECC) then you have to include the new field in slection critera (ther is an option available on top menu).
I would suggest before creating any query go to RSO2 select the data source. Display the field structure and check if the filed is there or not. You maysee Infoset level data directly by data display from top menu. Try that optionas well to check.
I hope it will help.
THanks,
S

Actual GI Date not getting populated

Hi
My issue is that after the change in Fiscal Year, now in some of the STO Deliveries the Actual GI Date is not getting populated in Delivery Document, however the PGI is complete.
Any suggestion where should I look, and what may be reason / solution.
Regards
AA

AA,
What Lakshmipati has said is correct the Actual GI date does not get populated we enter it manually, only in the case if you are doing a delivery for 26th march then you can enter in Actual GI date field 26.03.2008. (at that point the Actual GI date will be empty, and you can enter the required date) This date is being taken by the material document which will be generated after performing PGI.
If you are raising the Order or STO today and you are pursuing with delivery today itself then the system willl take today's date.
Regards
Sathya

Data not getting populated in Payslip in ESS Portal

Hi All
I am tryig to display Payslip in Portal. Have done all the necessary configuration in Benefits and payments->Salary statement->HRFOR/ EDTIN features.
Correct Payslip form is visible but data is not getting populated in the payslip.
Have tested the Payslip in PC00_M40_CEDT transaction with the variant i have set for HRFOR/EDTIN features and Payslip data is displayed correctly.
Have checked for PZ11_PDF transaction but i get a message saying it cannot be accessed through Easy access.
Can anyone pls let me know what might be the reason for data not getting populated in Payslip in Portal?
what is role of PZ11_PDF transaction in Payslip display in Portal?
Regards
Asha

Hello,
Do one thing for executing the PZ11_PDF trsaction please follow following steps.
1. Once you log in SAP system with same User - Id which you r using on Portal .
Once log in PUT "/N" in the command box . Then put the trasaction "PZ11_PDF" and execute it will
Call the salary statement .
Or
Once you log in SAP system put the trasction "/nsbwp" then give the trasaction "PZ11_PDF" it will
call the salary statement ..
give inputs once you done
.....The issue with Authorisations please check it ...
Add this object in ESS role "S_SERVICE' ...
and this object in ESS role "P_PERNR" ---infotype 0008
Edited by: Vivek D Jadhav on Jun 15, 2009 11:49 AM

Data not getting populated in ESS Payslip in portal

Hi All
I am tryig to display Payslip in Portal. Have done all the necessary configuration in Benefits and payments->Salary statement->HRFOR/ EDTIN features.
Correct Payslip form is visible but data is not getting populated in the payslip.
Have tested the Payslip in PC00_M40_CEDT transaction with the variant i have set for HRFOR/EDTIN features and Payslip data is displayed correctly.
Have checked for PZ11_PDF transaction but i get a message saying it cannot be accessed through Easy access.
Can anyone pls let me know what might be the reason for data not getting populated in Payslip in Portal?
what is role of PZ11_PDF transaction in Payslip display in Portal?
Regards
Asha

Asha,
Maintain Feature EDPDF which determines the SMARTFORM being used to make the payslip available for employees. This is more of a HR related issue and I believe if you post this in the ESS or HR Forum you would be able to resolve this issue.
Good Luck!
Sandeep Tudumu

Baseline date not getting populated from SRM invoices posted to ECC 6.0

Hi,
We are currently in ECC 6.0. The SRM system is in 4.0. We have this particular problem that the baseline date is not getting populated from the Invoices posted from the SRM. The baseline date is blank and the document is saved.
Did anyone face the same problem??? Can you please refer SAP note 541934 and expand........
Thanks
Aravind
Edited by: Aitipamula Aravind on Aug 10, 2009 5:13 AM

Hello,
Yes, you could check the attached note 541934 and regard the implementation of the field ZFBDT in the invoicing document.
Note 541934 provides a solution how to achieve the MM-customizing for payment baseline dates getting effective for invoices with SRM-origin. This note needs to be applied at your ERP-MM-side in the former plug-in-layer. As described in the note, this is a modification. It's recommended to apply in non-productive system first.
Hope the above infor.are helps for you!
Best Regards,
Gladys xing

Data in detailed block is not getting populated

I have created 3 blocks-: block1, block2 and block3
I have created two relations
1st - between block1 and block2 (block1 is master and block2 is detailed)
2nd - between block1 and block3 (block1 is master and block3 is detailed)
Now, on the canvas I place a text item block1.text_item1 (involved in relation) from block1,
and a text item block3.text_item3 from block3 (this too involved in relation) block3
when I execute the form and I query on master block that is on block1.text_item1, data in detail block that is in block3.text_item3 do not get populated.
Now I place a text item block2.text_item2(involved in the relation) from block2 on the same canvas
Now I again execute the form and query on the master block that is on block1.text_item1, this time data in all three blocks got populated.
I want to place items only from block1 and block3 at present. Could you please tell me how can I do this?
Regards

No, I am not getting such error. Only data is not getting populated.
If I remove item from block3 and place item from block2, then also the data is getting populated.
Item from block1+ Item from block2 -> Data is getting populated
Item from block1+ Item from block3 -> Data is not getting populated
Item from block1+ Item from block2+Item from block3 -> Data is getting populated
Regards

Sales data not getting populated for Material master by LSMW.

Hi,
When I am trying to create material manual for sales view material is getting created and the table MVKE(Sales Data for Material) is getting populated with the sales data. But when i Am trying with LSMW METHOD
Object          :     0020
Method          :     0000
Program Name    :     RMDATIND
Program Type    :     D(Direct Input)
    materials are geeting created but the sales data is not getting populated in the table MVKE(Sales Data for Material) and LSMW program also not showing any error.
Can any one tell me what is teh problem here.
Thanks,
Naren.

Hi,
along with VKORG, VTWEG in <b>BMM00</b> are you mapping the below one's also.
BMM00-XEIV1 = 'X'. "sales 1 view
BMM00-XEIV2 = 'X'. "sales 2 view
this will enable the sales(1/2) view.
Check it once..
Regards
vijay

APPROVAL_HISTORY_TABLE not getting populated in N step Badi

Hi Guys
I have implemented the N step Badi for the contract workflow WS14000148. The approval functionality is fine however the importing parameter APPROVAL_HISTORY_TABLE is not getting populated in the Badi. Appreciate if somebody who has faced the similar situation could let me know the root cause. I am using SRM 5.00 with support pack level SAPKIBKT14.
Regards
Rajeev

This is a known issue, bug 14341496. To avoid it please use java 1.6 on the browser.
Phil

Forecasting information not getting populated

Hi
I maintained the forecasting view for all my raw materials and finished goods.
most of my FERTS are MTO .
I am using strategy 82 or 86 or 50 for them.
but the consumption information is not getting populated for these materials.
Its getting populated for all the raw materials and and packs.
its not getting populated for FERTS .

Deepu,
Check the movement type which is being used to perform the PGI. This movement type must be defined for updating the consumption values, please check this in OMJJ.
Regards,
Prasobh

In VA01 In Schedule line Delivery date not getting populated

Hello,
We have developed enhancement for VA01 tcode.
Depending upon the quatity entered for a material it should show one more item as free good.
If quatity is 10 for a line item 10 then it should show item 20 by default same mateerial and quatilty as 1.We have done this it is working fine.
But if we select free good item in our case it is 20 and click on schedule line item buttom all quaitity fields getting populated.but delivery date not getting populated for only free good.for line item 10 it showing properly.
Can any one please suggest what i need to do in order to display delivery date for free good.
Thanks in advance.
Regards.

Thanks for your response.
Actually i have seen technical settings for that field.it is rv45a-etdat.this field has value till MV45AFZZ.seen in debugger.
Looks like it is clearing some where after the above include.Any suggisitions welcome.Thanks again.

Data not getting populated in output form

hi all,
i have to create a layout set with two pages, and fill the first page with ekko data and second page with ekpo data. i have designed the layout set. but the values are not getting populated in my form and logo is also not displaying.....
can anyone help me.
regards
mano

Hi,
1.Delete the Logo Command from the Textelement.And re include from Include ->Graphics->Stored document server>Select logo>execute.
2.Have you written the Driver program for the Layout.
IF yes,Have you assign the Form and Driver program in NACE.
3.If yes,Then Debug the Driver and Script ,check those values are coming or not.
Regards,
Shiva.

Currency Field is not getting populated in 0FI_AR_3 Data source

Hi Friends,
I have unchecked the currency fields DMBE2 , DMBE3 and curresponding currency type fields HWAE2
and HWAE3 in the data source 0FI_AR_3 and activated the DS.
when i am checkin the data using extract checker rsa3 , the fields DMBE2 and DMBE3 are filled with the amount but the corresponding currency types are not getting populated in HWAE2
and HWAE3 fields.the currency field are maintened in R/3 side.
Please suggest.
Thanks

I was checking this issue, and all the enhancements with fields need to
have a customer-exit to be populated.
If those fields are not delivered by SAP and are not in the original
datasource(RSA5) from Business content, this is related to an enhancement.
We can only see these fields in the datasource enhanced through RSA6.
To have the proper values assigned to those field, you should write an
User Exit program. This program must be created to fill the enhanced
fields as they are not filled in the same way as the SAP delivered
fields.More details about this process you can check note 576886.
576886-Change to user-defined fields not extracted.
This SAO Note is an example for some datasources regarding what should be
done.
Thanks,
Walter Oliveira.

Data is not being populated in screen field PSPNR after F4 search help.

Hi expert,
I have added one field GW_SELECT-PSPNR in existing screen 100, and there are many fields already existing.
and there are POV for 4 fielda and i added POV for field GW_SELECT-PSPNR.
PROCESS ON VALUE-REQUEST.
FIELD gw_select-kostl MODULE determine_kostl.
FIELD gw_select-aufnr MODULE determine_aufnr.
FIELD gw_select-matnr MODULE determine_matnr.
FIELD gw_select-bwart MODULE determine_bwart.
***Added by me
FIELD gw_select-pspnr MODULE determine_pspnr.
****end add
now problem is that the value is not being populated in screen.
values are coming in field GW_SELECT-PSPNR but in screen its not being populated.
i tried function module 'DYNP_VALUES_UPDATE' then also its not being populated
now this module MODULE determine_pspnr has code inside
MODULE DETERMINE_PSPNR INPUT.
   DATA:w_dynpfields TYPE dynpread,
     i_dynpfields LIKE STANDARD TABLE OF dynpread.
PERFORM fill_pspnr.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'PSPNR'
      value_org       = 'S'
    TABLES
      value_tab       = gt_pspnr
     field_tab       = lt_field_tab
      return_tab      = lt_return_tab
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
LOOP AT lt_return_tab INTO ls_return_tab.
    gw_select-pspnr = ls_return_tab-fieldval(12).
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        input = gw_select-pspnr
      IMPORTING
        output = gw_select-pspnr.
    EXIT.
ENDLOOP.
refresh i_dynpfields.
   w_dynpfields-FIELDNAME = 'gw_select-pspnr'.
   w_dynpfields-FIELDVALUE = gw_select-pspnr.
   APPEND w_dynpfields to i_dynpfields.
   APPEND gw_select to gt_select.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
    EXPORTING
      DYNAME                     = sy-repid
      DYNUMB                     = sy-dynnr
    TABLES
      DYNPFIELDS                 = i_dynpfields
   EXCEPTIONS
     INVALID_ABAPWORKAREA       = 1
     INVALID_DYNPROFIELD        = 2
     INVALID_DYNPRONAME         = 3
     INVALID_DYNPRONUMMER       = 4
     INVALID_REQUEST            = 5
     NO_FIELDDESCRIPTION        = 6
     UNDEFIND_ERROR             = 7
     OTHERS                     = 8
ENDMODULE.                 " DETERMINE_PSPNR INPUT

Hi
Use this code instead of your function call:
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
      EXPORTING
        retfield        = 'FEE_NUMBER'
        dynpprog        = sy-cprog
        dynpnr          = sy-dynnr
        dynprofield     = 'FEE' ================>your field
        value_org       = 'S'
      TABLES
        value_tab       = it_fee
      EXCEPTIONS
        parameter_error = 1
        no_values_found = 2
        OTHERS          = 3.
Best Regards
Yossi

OVS value not getting populated in field

Hi Experts,
Kindly suggest me a solution for the below given issue.
I have added three custom fileds to an already existing WD Coponent.
And also added OVS help as an input help method to these fields.
If I right click on the WD application and TEST, the application opens in browser and I am able to select the value from OVS list.
If I run the application by copying the URL and paste it in the browser, or clicking on Portal link, if we select the value from OVS list that value is not getting populated in the field.
Below is the logic I have written.
method ON_OVS_PAYMENT .
TYPES:   BEGIN OF ty_payment,
             payment TYPE char4,
             desc    TYPE char30,
           END OF ty_payment.
* declare data structures for the fields to be displayed and
* for the table columns of the selection list, if necessary
types:
    begin of lty_stru_input,
*   add fields for the display of your search input here
      payment type char4,
*      desc    type string,
    end of lty_stru_input.
types:
    begin of lty_stru_list,
*   add fields for the selection list here
      payment type char4,
      desc    type char30,
    end of lty_stru_list.
data: ls_search_input type lty_stru_input,
        lt_select_list   type standard table of lty_stru_list,
        ls_text          type wdr_name_value,
        lt_label_texts   type wdr_name_value_list,
        lt_column_texts type wdr_name_value_list,
        lv_window_title type string,
        lv_group_header type string,
        lv_payment       type string,
        lt_payment       TYPE TABLE OF ty_payment,
        ls_payment       TYPE ty_payment,
        lv_short         TYPE string,
        lv_table_header type string.
field-symbols: <ls_query_params> type lty_stru_input,
                 <ls_selection>    type lty_stru_list.
case ovs_callback_object->phase_indicator.
    when if_wd_ovs=>co_phase_0. "configuration phase, may be omitted
*   in this phase you have the possibility to define the texts,
*   if you do not want to use the defaults (DDIC-texts)
      ls_text-name = `PAYMENT`. "must match a field name of search
      ls_text-value = `Terms of payment`. "wd_assist->get_text( `001` ).
      insert ls_text into table lt_label_texts.
      ls_text-name = `PAYMENT`. "must match a field in list structure
      ls_text-value = `Terms of Payment`. "wd_assist->get_text( `002` ).
      insert ls_text into table lt_column_texts.
      ls_text-name = `DESC`. "must match a field in list structure
      ls_text-value = `Description`. "wd_assist->get_text( `002` ).
      insert ls_text into table lt_column_texts.
      ovs_callback_object->set_configuration(
                label_texts = lt_label_texts
                column_texts = lt_column_texts
                group_header = lv_group_header
                window_title = lv_window_title
                table_header = lv_table_header
                col_count    = 2
                row_count    = 20 ).
    when if_wd_ovs=>co_phase_1.
      ovs_callback_object->context_element->get_static_attributes(
          importing static_attributes = ls_search_input ).
*     pass the values to the OVS component
      ovs_callback_object->set_input_structure(
          input = ls_search_input ).
    when if_wd_ovs=>co_phase_2.
      if ovs_callback_object->query_parameters is not bound.
******** TODO exception handling
      endif.
      assign ovs_callback_object->query_parameters->*
                              to <ls_query_params>.
      if not <ls_query_params> is assigned.
******** TODO exception handling
      endif.
*     call business logic for a table of possible values
*     lt_select_list = ???
      lv_short = <ls_query_params>-payment.
      CALL FUNCTION 'ZSIILESD001' DESTINATION 'LOGICALE22'
      EXPORTING
      i_payment             = lv_short
      TABLES
      ET_PAYMENT            = lt_payment.
    lt_select_list[] = lt_payment[].
      ovs_callback_object->set_output_table( output = lt_select_list ).
    when if_wd_ovs=>co_phase_3.
*   apply result
      if ovs_callback_object->selection is not bound.
******** TODO exception handling
      endif.
      assign ovs_callback_object->selection->* to <ls_selection>.
      if <ls_selection> is assigned.
        ovs_callback_object->context_element->set_attribute(
                               name = `PAYMENT`
                               value = <ls_selection>-payment ).
      endif.
endcase.
endmethod.

Hi Pradeep,
I don't think it really make any difference to the application run if we run from SE80 or run via application url.
Try to set the external break point in OVS PHASE3 for your user. Check if the break point is reached and data is set after selection from OVS.
Regards,
Rama

Date is not getting populated soon after a change in a field which has LOV.

Similar Messages

Maybe you are looking for