Date is outside factory calendar range

HI Experts,
I have an issue with date variables. When ever i try to click on browse button, beside the variable selection i keep getting the # symbol. I need to see the calendar popup instead of this # symbol.
I did some research and found some threads which i am giving below, but none of them solves my problem . Any help will be greatly appreciated.
https://forums.sdn.sap.com/click.jspa?searchID=26392212&messageID=4847144
https://forums.sdn.sap.com/click.jspa?searchID=26392212&messageID=7039838
Thank You,
Sharma.

Hi Sharma,
              Check here........
http://help.sap.com/saphelp_nw70/helpdata/en/5f/b6d837aeadf03ae10000009b38f889/content.htm
for display values in variable screen when you browse for a char.
you can get values from master data table or from info provider.
Thanks,
Vijay.

Similar Messages

  • BEx variables: Date is outside Factory Calendar Image

    Good day
    A user received the following message when selecting the inpiut help for a date variable for a CRM query:
    " Date is outside Factory Calendar Image"
    I have checked tcode SCAL and noticed that the factory calendar for South Africa = 1996 to 2010. I checked the CRM source and their factory calendar is the same. In the mean time I have transferred the global settings for SAP DNI (parts) into BW and the factory calendar setting for South Africa now shows 1996 to 2015.
    Problem is that the CRM query still shows the same error message.
    Question:
    1) Should factory calendar settings for all SAP sources (Modules i.e. CRM...) be imported into BW, or is there another setting that I must check?
    Thanks in advance.
    Cj

    This is what I have done:
    Whe have the following R/3 modules (source systems in BW)
    SAP DNI
    SAP dFM
    SAP CRM
    SAP SRM
    etc.
    (Tcode = SCAL, selected 'factory calendar', selected 'rebuild tables')
    Firstly I have transferred the global settings for SAP CRM (as the BEX query is from CRM). Their factory date was 2012. This did not solve the problem.
    secondly, I did SAP DNI, their factory date = 2015, this also did not solve the problem.
    I then transferred the global settings for SAP dFM, our main reporting module, their factory date = 2020. The problem was solved.
    Seems as if only ONE of the modules depicts the factory calendar date for BEX.
    I have rested this again and only SAP dFM global settings rectified the BEx display problem.
    Hope this helps?

  • Date is outside the factory calendar range

    I am trying to run a BW query. When I click on the calnedar icon field. It gives this error.
    Error: Date is outside the factory calendar range
    Msg No. FK884
    What could be the problem in the query? Has anybody had the similar problem before? I tried to search in SAP notes and could not find anything close to this.
    I will  Appreciate your help. Thanks a lot.
    Abhi

    Hi Abhijit,
    We got the same error message in 2010.
    1) Check in transaction SCAL that the Factory Calendar ID 01 (i.e. German) is valid to 2009. This explains the error message.
    2) Found SAP Note 1136142 about the configuration of default factory calendar ID of F4 Help and hierarchy for Time-characteristics in BI 7.0.
    SAP Note Solution:
    The key figure attribute obtains its value from the default work calendar as it is maintained in transaction RSRHIERARCHYVIRT (General Settings -> Default Factory Cal. ID).
    This setting is valid across the entire system and does not permit any variable selection of the factory calendar for each query.
    Furthermore, a value for 0NUMWDAY is calculated only for the period in which the default factory calendar is valid.
    3) Check in transaction SCAL that the Factory Calendar ID of our location is valid to 2050.
    The problem is solved after changed the Default Factory Cal. ID from 01 to the ID of our location in transaction RSRHIERARCHYVIRT.
    Regards,
    Ricky

  • Warning of " Date of  outside  the factory calendar Range"

    Hi Experts,
            I have created a variable  of ocalday,It is taking  # values and it showing warning " Date of  outside  the factory calendar Range".How avoid this warning.Actually intially in the one of infocubes carries the # value for 0calday, now we have deleted it, even then  it taking # values and showing same warning.I have check at variable it doesnt carring any default value.Now to delete the # values from variable so that it should not show any warnings.
    Can any body suggest me any thing.
    Thanks
    Vinod

    Hi Srinivas ,
       Thank you very much for your reply.There is # value in the master and transaction data.Even im not able to suppress this message.As it indicating a msg no 884 which is not there message list in RSRT.
    Can you suggest me any other thing.
    Thanks
    Vinod

  • Billing plan date should be same as invoice date as per factory calendar

    Hi,
    We have two contracts, one is having billing plan material and another is having no billing plan material of same customer.When we go for the billing, as because these having all the header fields same it should give one single invoice of those two contracts,but its giving two invoices means the invoice splits.I check it and found, due to different billing date the invoice splits.If we go for VF04 we can force the billing date as same,but they are is a one batch running for this invoice.My invoice date of two contracts is 22.06.2014 which is factory calendar date and billing plan date is 26.06.2014 which is contract start date.My client is asking that can we get billing plan date same as invoice date as per factory calendar in standard to get single invoice? Kindly suggest me where is the settings.
    Thanks in Advance
    Regards,
    Braja

    Braja,
    Check this
    Goto  the billing plan tab in the corresponding line item and check the rule that is determined. Now go to the configuration of this rule table by using the path
    SPRO>SD> Billing> Billing Plan> Define rules for determining dates and choose your Applicable rule and click on the details.
    There you will see the Calendar ID field where you will have to maintain the applicable factory calendar. I think this should work and your billing date on the item relevant for billing plan should be the same as the other item.
    Hope this helps,
    Ravin

  • System does not propose the delivery date based on factory calendar

    Hi,
    I am creating a sales order for a delivery date for this sat which is (2/22/09)
    I have maintained 2 separate calendars for
    1) shipping point
    2) for the route
    The route has a transit time of 1 day and the calendar has sat and sunday as non working.
    the Shipping point has a pick/pack time of 1 day and the calendar has sat and sunday as non working
    The material is available in the warehouse
    Now when i create this sales order i enter the delivery date as 2/22/09, the system does not propose me the delivery date of monday (i.e 2/23/09) It accepts the 2/22/09 delivery date.
    In the schedule line i do see the date as 2/22/09 only.
    The delivery was created with the following dates
    Picking = 2/17/09
    Transportation Planning = 02/18/2009
    Loading =02/18/2009 
    Planned GI= 02/18/2009
    Delivery Date = 02/22/2009
    How can the system give me the delivery date of a sunday when the calendar doesnt allow sunday as working day.
    Also the route time is 1 day in transit so i am not sure why the system is proposing a 3 day transit time?
    Can any one explain the behaviour of SAP for the delivery date logic

    Dspsac,
    Delivery date can be any date.  For instance, if your customer insisted on a Sunday delivery, you would accommodate him, regardless of any calendar.
    From the delivery date, the system counts backwards USING THE FACTORY CALENDAR ASSIGNED TO THE ROUTE by the number of days in the route.  You have to consult the FC assigned to your Route to determine if the GI date has been properly calculated.
    From the GI date, the system counts backward Pick/pack time, using the shipping point calendar, to arrive at Material availability date.
    Calculations are explained in SAP online help
    [Transportation and Delivery Scheduling|http://help.sap.com/erp2005_ehp_04/helpdata/EN/dd/5607e7545a11d1a7020000e829fd11/frameset.htm]
    Regards,
    DB49

  • How to get working Date based on factory Calendar and current date

    Hi All,
    I want to deletermine a date which is Invoice date + 3 working days excluding SAT, SUN and holidays. For e.g, if Invoice date is 18th Sept, 2009, then my desired date should 23rd Sept, 2009.
    I do have factory calendar ID but i dont know the proper function module.
    Can some one please help me...

    Hi,
    check this code,
    DATA:
    w_date   TYPE dats,
    w_date1  LIKE scal-date,               " dats
    w_date2  LIKE scal-date,
    i_factid LIKE tkevs-fcalid VALUE 'IN', " IN for India
    it_dats  TYPE TABLE OF rke_dat,
    wa_dats  LIKE LINE OF it_dats,
    w_lines  TYPE i.
    CALL FUNCTION 'CALCULATE_DATE'
      EXPORTING
        days        = '0'
        months      = '1'
        start_date  = sy-datum             " for example '20090918'
      IMPORTING
        result_date = w_date.              " 1 month added '20091018'
    w_date1 = sy-datum.
    w_date2 = w_date.
    CALL FUNCTION 'RKE_SELECT_FACTDAYS_FOR_PERIOD'
      EXPORTING
        i_datab  = w_date1
        i_datbi  = w_date2
        i_factid = i_factid
      TABLES
        eth_dats = it_dats.                " number of working days between two dates
    READ TABLE it_dats INDEX 4 INTO wa_dats.
    WRITE :
      / wa_dats-periodat.                  " new date '20090923'
    Hope this will be helpfull...
    Regards
    Adil

  • Difference between dates based on factory calendar.

    Hello
    Is there a standard function module which can calculate the number of days.(difference between creation date of the document and system date) but in accordance with the factory calendar.
    and also os there a way we can find out these function modules names by ourself

    Hi,
    please don't do a cross posting of the same question in different forums. It is against the rules --> see rules of engagement. But anyway, check out your other thread, i gave you the answer.
    kind regards
    Siggi

  • Shopping Cart created with delivery date outside factory calendar

    The user specified 13.08.2207 as the delivery date.  The Cart was approved and converted to a Purchase Requisition.  Status is now 'error in process' and of course no Requisition exists in table EBAN.  We cannot change the Cart because it is approved.  What other options do we have?

    Hi,
    Please check OSS note 814100.
    Also you can maintain calendar in SPRO or transation SCAL
    And you can also use BBP_DOC_CHECK badi to implement your own logic.
    Kind regards,
    Yann

  • Backend transfer error: delivery date out of factory calendar

    Hi to all,
    When an order, created from a shopping cart, has been transfered to backend system, i've got the error in subject.
    I've controlled all dates, both in order than in SC. All dates are not in festive days.
    Any ideas?
    Thanks in advance,
    Christian

    Hi Christian,
    Please read OSS note 814100.
    Kind regards,
    Yann

  • Date not defined in factory calendar

    while creating the process order using the t - code COR1, i got error saying that " Date not defined in factory calendar "
    i extended the factory calendar in t - code SCAL.
    still i am facing the error.
    please help

    Ok Sudhir.
    Then the problem is one of the workcenter you are using in Production Order. The Intervals of available capacity are maintained in a work center capacity whose 'To date' is after the expiration date of the factory calendar. The error does not occur if the date is 12/31/9999.
    Go to workcenter - Capacity - Interval & shifts
    The 'To date' of an interval of available capacity must be maintained so that it is within the validity period of the factory calendar. The exception is the date 12/31/9999, which is allowed.
    Regards
    Abhijit Gautam

  • Maintain Factory Calendar

    Hi
    We are getting an error when running a query that contains a variable using Factory Calendar, "date is outside the factory calendar range"
    I check SCAL and noticed that my calendar is set to date 1996 to 2010. When comparing to R/3 our BW calendar is outdated.
    How do I maintain this calendar using R/3? How do I load this information? I'd rather not to change directly in BW.
    Thanks

    Go to R/3 source system right click and do transfer global settings ,it should update the factory calendar .
    Ravi

  • Deliv. date outside period covered by factory calendar IN

    Hi Experts,
    I am trying to create Purchase Order with 2011 year delivery date system is showing bellow issue in production server.
    Deliv. date outside period covered by factory calendar IN
    Message no. ME078
    Please advice me how can i overwrite this problem immediately.
    Thanks in advance,
    Chandhu

    Dear Experts
    I tried the method which mentioned above, but when I tried to change the Valid Fr. Year 1996 to Year 2011, it probe me the message "Please enter validity area between years 1995 - 2010." and I wasn't allow to save.
    Pls advise how to solve the above problem.
    Thanks.

  • Error Msg_ME078 - DELIV. date outside period covered by factory calendar

    Dear experts:
    when i create PO with ME21N,
    if the delivery date is not within the year of 2010,
    there will appear an error msg "ME078 - DELIV. date outside period covered by factory calendar".
    i have checked the factory calendar with SCAL.
    i know how to modify the factory calendar to expand the time period,
    but now i still have a question,
    the system can't change the year period automatically?
    so we have to change the period after we confirm the public holiday calendar?
    thanks ~
    B/Rs
    Jamie

    hello~
    if the system can't update the calendar automatically..
    why the consultant didn't set the valid period to an  exaggeration year at that time?
    did they have any concern?
    thanks a lot~
    B/Rs,
    Jamie

  • Deliv. date outside period covered by factory calendar TR//PO error

    Dear Sap Experts
    I am creating the P.O For Delivery Date 31.03.2010
    System has giving following error,
    Deliv. date outside period covered by factory calendar TR
    How can I overcome this error,
    Please Give me the solutions
    Thanks

    Thank for ur reply,
    Please give me the procedure with that T code
    I didn't got any year with that T code
    Thanks

Maybe you are looking for