Date issue in a Trinidad form

Hi,
I have dragged and dropped a trinidad form in 11g, which contains a date field. I have provided the 'Commit' button, which takes my form data, and submits the same to subsequent layers.
However, whatever the date format I enter into the date field, its not accepting. It will just say-
"Valid Format : "
without quoting the format it is expecting.
To solve the issue, I tried making the date as a simple date in both Entity and View Objects, by specifying the Simple Date format in the Control hint of the properties of the View and the Entity.
Is there anything that I am missing ? Kindly advice.
Thanks and Best Regards, nattu

Another thing I have tried is by giving the <tr:chooseDate>, where the calendar control appears.
I have specified the id given for chooseDate as the id for the date field in my tr:inputText tag, which has the date field.
Whenever I drag and drop the form, it would give me a text box for the date, instead of an inputDate column. I explictly tried for changing the inputText to inputDate, but it wont change the result.
Kindly advice.
Thanks and Best Regards, nattu

Similar Messages

Overlap date Issue 0hrposition_attr

Hi
I'm facing one records overlap date Issue with 0hrposition_attr.Out of 4 records one records i'm getting as start date as future date and end date as past date.I checked in the source i did not see such records.Due to this issue the records are not updated in the target.But i did not notice such issue with 0hrposition_Text and 0HRPOSITION_CCTR_ATTR load went fine with out any over lap.
Eg:
POSITION          VALID FROM          VALID TO
12345678            04/01/2014            04/20/2014
12345678            04/21/2014            04/24/2014
12345678            04/25/2014            04/24/2014
12345678            04/25/2014            12/31/9999
I debug but i did not see any issue,So there any way that i can delete that particular records at PSA level so that loads went successful.I attacdshed the document for better idea.
Regards
Raj

Hi,
only these record is getting the problem and all records.
check the one record at RSA3 for testing purpose same record check in BW side.
if you getting like this not problem you can check the only latest record
12345678
04/25/2014
12/31/9999
put the filter at VALID TO data 12/31/9999 and form date 04/25/2014.
you want lookup the code just add the one more point.
WHERE POSITION = RESULT_PACKAGE- 0POSITION
     and DATETO = '99991231'.
it will pick the only latest record.
Thanks,
Phani.

Oracle 11g - Date Issue?

Oracle 11g - Date Issue?
=====================
I hope this is the right forum for this issue, if not let me, where to go.
We are using Oracle 11g (11.2.0.1.0) on (Platform : solaris[tm] oe (64-bit)), Sql Developer 3.0.04.
Our NLS_DATE_FORMAT = 'DD-MON-RR'
Using 'RR' in the format forces two-digit years less than or equal to 49 to be interpreted as years in the 21st century (2000–2049), and years 50 and over, as years in the 20th century (1950–1999). Setting the RR format as the default for all two-digit year entries allows you to become year-2000 compliant. For example:
We have a date '01-JUN-31' in our source system. It treat this date as 01-JUN-2031' instead of '01-JUN-1931'. One century forward.
Do we able to resolve using NLS_DATE_FORMAT change?
How do we resolve this issue?
Thanks in helping.

qwe16235 wrote:
Our source is Oracle data base, where S_date is defined as DATE. Why did you say STRING , when it defined as DATE data type?I doubt you source is an Oracle database. You may have it stored in an Oracle database, but it cam form somewhere else, and was very likely inserted into the table as a string, wherever it came from. Given a string that resembles a date, Oracle will try to convert it to a date using the nls_date_format parameter for the session (which can either be set in the session or inherited form the database). Perhaps this will help explain:
SQL> create table t (conv_type varchar2(10), dt date);
Table created.
SQL> alter session set nls_date_format = 'dd-mon-rr';
Session altered.
SQL> insert into t values ('Implicit', '01-jun-31');
1 row created.
SQL> insert into t values ('Explicit', to_date('01-jun-1931', 'dd-mon-yyyy'));
1 row created.
SQL> commit;
Commit complete.
SQL> select conv_type, to_char(dt, 'dd-mon-yyyy') dt
2 from t;
CONV_TYPE DT
Implicit 01-jun-2031
Explicit 01-jun-1931So, unless you are really inserting dates, not strings that look like dates, you are going to have problems.
John

Convert a string in dd/mm/yy form into a date in mm/dd/yy form

hi everyone
am having a problem.
i have a jsp page which receives a "request.getParameter("date")"
My user has input this date in the format dd/mm/yy
but i need to output this date to my db which accepts mm/dd/yy format.
Am thinking of implementing this in the follwing way
1:Since i have a string in dd/mm/yy form,i parse it to a date in this very format.
2:then i format it again to the mm/dd/yy form
3: i output it to the db
is this the correct way of doing it?
is there an easier way to convert a string in dd/mm/yy form directly into a date in mm/dd/yy form without getting a distorted value?
help me please

Hi,
Parsing the date manually is a tedious task. If performance is not a issue, it is better to use SimpleDataFormat. Here is a sample code for converting the format:
String str = "01/02/1999";
SimpleDateFormat sdf = new SimpleDateFormat("dd/MM/yyyy");
Date dt = sdf.parse(str);
sdf.applyPattern("MM/dd/yyyy");
System.out.println(sdf.format(dt));
Muthiah.

XML Forms Builder: Sorting news based on a date field in a XML form

Hi Experts
I have a requirement and I am stuck up in finding a solution. I have a XML form and this has been mapped to a folder in KM. It publishes news. In the collection renderer settings there is an option to sort the news ascending or descending based on created/modified criteria.
The requirement is to sort the news based on a date field in XML form. Can you experts help me in getting the solution for same?
The users who post the news in our portal needs the information to be sorted based on a date field shown.
Thank you
Best regards
Ramamoorthy D

Hi Experts
I have not got any solution for this issue. Can any of you get me some clue to work on this issue with sorting news based on a date field in a XML form?
I removed the property link from the screen field Input field.
Thank you
Best Regards
Ramamoorthy D

Webservice giving error "couldn't post data to " in adobe interactive form

Hi Gurus
My requirment in to place a submit button in adobe interactive form , when the user clicks on it the data in the form has to update the table. For this purpose i have configured webservice in my crm 2007 server. Now webservice is working and i m getting the response. but when i create a data connection in the adobe form and when i execute the webservice i getting " Couldn't post data to ". "
error . Plz help me out to resolve this issue
Thanks in advance
Regards
Johny

Hi Jhonny,
Make the Submit button a regular one instead of execute and place the following code in the click event(JavaScript).
var cURL = "Provide the Soap Address url which is present in WSDL";
var service = SOAP.connect(cURL);
xfa.connectionSet.DataConnection.execute(0);
Regards,
Mathan

Is possible to capture the SP username of who is making submission of the data from an InfoPath 2010 form?

Hi all,
Does anyone know how to capture the SP username of who is making submission of the data from an InfoPath 2010 form? I looking to avoid the user need to type extra information like username/ manager name, etc; and then use code behind to be doing validation
before to push that data to an sql server.
Any suggestion , book reference , link is acceptable
thanks in advance
CRISTINA& MICROSOFT Forum

Hi Cristina,
Please check the following article with using web service UserProfileService.asmx to get the current user profile in InfoPath code behind and use the validating event to do some complex validation, it should help.
http://blogs.msdn.com/b/infopath/archive/2007/03/07/get-the-user-profile-through-moss-web-services.aspx
http://codesupport.wordpress.com/2010/04/05/sharepoints-userprofileservices-getuserprofilebyname-method/
http://www.bizsupportonline.net/infopath2007/infopath-basics-3-ways-validate-data-infopath.htm
http://henry-chong.com/2010/12/infopath-validation-gotcha/
Thanks
Daniel Yang
TechNet Community Support

Data Issue

Hi All ..
           We are facing one data issue DSO. One record is worngly loaded with some project iD ( Ex record is having ID GE1234 insted of having LE4423) remaining details are same . we are loading the data furtherly to master data table from the DSO. if i try for reporting for project id LE4423 ,information not avilable because it is heaving wrong ID,it is key also.But in the Source system (CFG) side Data is correct with ID LE4423.
         In update rule we are following one to one mapping for all infoobjects.My requirement is i need to have in my DSo LE4423 . I need to overwrite the record id GE1234 with LE4423 without affecting other fields in the record.
        Shall i load till PSA with the ID LE4423 ..then if load this single record to DSO will overwrite the GE1234 by choosing other field as key field. but we are following one to one mapping in update rule.
Please help me on this. i need to hev a correct id for record.
Thanks ,
Prem.

You can use selective deletion to delete the record with Project ID = GE1234
Load the data till PSA
Load the data to DSO using selection Project ID = LE4423 in DTP from PSA.
check in further data targets also for mismatch of data
Hope it helps,
Naveen Vytla
Edited by: Naveen Vytla on Nov 18, 2008 10:49 AM

Custom report -Mb51 -EBELN,AUFNR,KDAUF & KUNNR -Data issues

Hi,
This custom report is related to material document list (MB51).
I was trying to retrieve Purchase Order(EBELN),Order number(AUFNR),Sales order(KDAUF) & Ship-to-party( KUNNR) from MSEG & MKPF.
Unfortunately
It looks like for Sales Orders, it picks up the Customer Number but no Order Number. For STOs, it looks like it picks up the STO # but no Customer #.
How to over come this?
FYI..I also tried adding fields to standard report(MB51) and it is also doing the same manner .
Am I pulling it from Wrong tables? or is it related to DATA issues?
Regards
Praveen
Message was edited by:
PRAVEEN s

Hi,
This custom report is related to material document list (MB51).
I was trying to retrieve Purchase Order(EBELN),Order number(AUFNR),Sales order(KDAUF) & Ship-to-party( KUNNR) from MSEG & MKPF.
Unfortunately
It looks like for Sales Orders, it picks up the Customer Number but no Order Number. For STOs, it looks like it picks up the STO # but no Customer #.
How to over come this?
FYI..I also tried adding fields to standard report(MB51) and it is also doing the same manner .
Am I pulling it from Wrong tables? or is it related to DATA issues?
Regards
Praveen
Message was edited by:
PRAVEEN s

How to use two RFC models in one Data Source for a Interactive Form UI Elem

Hi
I want to use two RFC models (two Function Modules from a SAP Backend system) in one context node of a View Controller in order to pass it as the data source to a Interactive Form UI element. Can I use the data binding mechanism directly or have I to copy the data into a Value Node within the view controller.
Thanks for helping
René Morel
SAP (Schweiz) AG

Rene,
You can create a local context node in component controller and copy the data from both the RFC's to this node, then bind it to the view controller. Then you can make this view context node as the datasource of the interactive form.
Regards,
Anand

Consistent Data Issues Even After Replacement

I don't know whether to blame the phone or the ice cream sandwich update for all the problems I have been having with my RAZR. When I first got it six months ago it was great and I loved it now after the ice cream sandwich update I dont really like it anymore. I never had any sort of issues while using it on gingerbread. Today, I have seen my phone switch constantly between 3g and 4g more times than I can count over the course of half an hour. I couldn't even get a consistent signal to watch a 3 minute youtube clip.
First off, I updated it to ICS but first wiped the phone clean including cache, etc. So it would have basically been a clean install. Now, I have certain issues. The 4g and 3g switch is terrible. On the street and in my own house I have had the same thing happen. In my house I get anywhere from 3-5 bars of 4g but it still switches over to 4 bars of 3g. I have even seen it switch from 4g to 3g when I had full bars. I have already replaced the sim cards, but I am still having these issues. It's actually happening on all 4 of my RAZRs on my family plan. I have gone through the network resets where I pull out the sim card and for 30 seconds, insert it, power on the phone, etc. I went through all 4 of them with the Rep over the phone. I have also had several instances where I did not have data but signal bars and then I didn't have absolutely anything at all. I live in a "major" city metro area, Boston, and I can't believe I am having these problems.
At first I would have gone off and blamed Verizon, but it is definitely not Verizon, it is our phones that are terrible. I can confirm this because my brother uses an ipad (4g Verizon) on a separate account and he consistently maintains 4g even though I have seen it go as low as two bars. Yes, I understand the ipad is a different device and may have a different radio, but that is exactly how our phones used to work on gingerbread. I received a replacement device and I am still having the same issues. Also, the headset speaker, not the speaker on the back, or receiver is really tinny during phone calls even with the in call volume down half way. It is really annoying and the little tone that plays after hanging up makes the speaker sound like its about to blow out. I don't know what to do if the RAZR will keep having data issues because this is absolutely ridiculous. I know i'm not entitled to anything but for $310 a month I mean come on, I just want my phone to work properly. As I am typing this now, I have witnessed my phone switch between 4g, 3g, and no signal at least 5 times and of course my brother's iPad on Verizon has kept its 4g signal.

Thanks for all the suggestions, but they just don't work at all guys. I've even tried that restore connectivity app from Motorola, but of course it didn't work. I don't like that I keep having constant switches between 3g,4g, and no signal bars. It's awful thats just what it is. I feel like I got gipped with this update promising better user experience. If the darned thing can't connect to their network, then what is Verizon doing to address these issues? Every time I try to do something "data intensive" (i.e. youtube, facebook, twitter, etc) the data signal just drops and I'm either left with gray bars and no data or no signal bars whatsoever. Also one thing that annoys me to death with this phone is that I have it sitting in my pocket after I lock the screen and I go to pull it out of my otherwise empty pocket. The screen is turned on by itself (I have the clear silicon case on it so the power button shouldn't be pressed by itself and no I don't wear skinny jeans), its got 3g and no bars, and its piping hot.
WHAT IS WRONG WITH THIS PHONE VERIZON???!!!

Master data Issue --- materials have unassigned or # values ...!!

Hello Experts,
I am facing an issue that the Customer Data is missing in a BEx Report.
Data Flow is 2LIS_13_VDITM --> DSO1 --> Merging DSO --> Cube --> Multiprovider --> Bex Report.
Exact issue is Customers in the Bex Report has unassigned to Sales Office, Sales Group, Sales District.
The only reason a customer should show up under u201Cunassignedu201D or u201C#u201D is if itu2019s improperly set up in the system.
customers are assigned with two values. one which has data and the other which has unassigned value.
I wanted to know, how do i check if the matierials are valid to have unassigned Values ?
Checked the Merging DSO and saw that there are actually values assigned values for the affected matierials.
After that checked the Cube data values are displayed except the Master Data values.
I guess..its completely related to Master data. I would like to know how can i resolve this issue.
Please reply me if you face this kind of master data issue in your expeiriance.
Thanks,
SN.

Hi,
Are Sales Office, Sales Group, Sales District are attributes of Customer?
In case they are, then the customers will be unassigned to Sales Office, Sales Group, Sales District in case the data for these attributes is loaded to the customer attributes.
and also check if the customer characteristic is properly assigned in the multiprovider.
Check if it helps.
Regards,
Joe

Saving the data from two info path forms in to a single list in share point 2010

Hi ,
I have two info path forms are in share point page FM 1 and FM 2.
In FM 1 I am getting data from lists by using drop down and casket drop down and FM 2 i need to enter manually after entering
i want to save both forms information(FM 1 & FM 2 ) in to a single list of share point 2010
If any knows the solution please reply me
Thanking You,
Arun Darly

Hi，
Based on your description, my understanding is that you want to save the data from two info path forms in to a single list in share point 2010.
We can't save the data from two info path forms in to a single list, but we can
save the data from two info path forms in to a single library.
Open the FM 1 and FM 2 in Infopath(you have save it Locally once).
Publish the FM 1 and FM 2 as content types named FM 1 and FM 2.
Add the content types FM 1 and FM 2 into a document library, Then you can save the data
from two info path forms in to a single library.
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

OBIEE 11g .0d date issue

Hi,
I create an initialization block to populate a couple of repository variables.
After saving the RDP the value for the default initializer changes from 2011 to 2011.0d
I have been using several workaround. But I need some permanent fix in rpd itself. Can anyone point to some Oracle Document? Is this issue been resolved in latest release of OBIEE. I am using 11.1.1.6.6.
Workaround Ref : The .0d date issue
Re: OBIEE 11.1.1.6.2 BP1 Repository Variable data type

Have you gone through my suggestions at the below links?
The .0d date issue
Re: OBIEE 11.1.1.6.2 BP1 Repository Variable data type
You have to do it where ever you are using that rep. variable not in the init block.

Verizon mades changes in the coding and now Windows Phone 7 is having data issues!!!

Starting about 3 weeks ago, I stopped receiving text messages and even worse stopped receiving calls yet alone my voicemails. I have changed not one thing to my phone, everything is exactly the way it was before the issues arised. Now I have to trick my phone to receive my data by dialing into my voicemail... And then what do you know, 30 text mesages, 12 voicemails!!!
The voicemails wont even tell you the date or time stamp (the time the voicemail was received). After numerous *228 and talking with level 2 over the holidays, I see a huge article on multiple news sites stating Verizon is having data issues... Dropped calls, loss of data, no signal while all our phone keep showing full bars and 3g. Verizon stated its only happening on there 4gLTE system and not 3G but thats a load of crap.
All one has to do is a google search of loss of text messages or voicemails on Verizon and you will see 100's up to 1000's of users like you and me all experiencing the same issues. And not just with Windows Phone 7, but with there baby Driod and iPhone as well.
What really ****** me off is that Verizon loves to play the blame game or pass the buck game. Hard Reset your phone and that will solve the problem... Yeah Right. If this was our OS and we updated a driver that changed the OS in the background I can see that being the solution. But for the 100's or 1000's of users that go to work daily, check there emails and text daily, and haven't changed one thing on the phone... THIS IS UNACCEPTABLE!!!
Now I read an articile for someone extermely close to Microsoft stating that Verizon turned down Nokia's new 4GLTE phone because they have no faith in the operating system and I have to think that maybe behind the scenes Verizon is trying to force us off Windows Phone 7 platform with data issue behind the scene and try to get us all into the Droid Platform which they make 50% of the cash off the phone just like the iPhone...
This is a joke, and I am really starting to think about going to ATT and getting the HTC Titan or the new Nokia 900. I have already research a 3 party app that will allow you to backup and restore your phone. And just read that Microsoft just put out an ad for backup, restore and cloud backup programmers for this latest feature.
Verizon the games need to stop, Verizon you need to stand behind this Platform, Verizon you need to provide better service for all us 3G users!!!
TheJester77

Starting about 3 weeks ago, I stopped receiving text messages and even worse stopped receiving calls yet alone my voicemails. I have changed not one thing to my phone, everything is exactly the way it was before the issues arised. Now I have to trick my phone to receive my data by dialing into my voicemail... And then what do you know, 30 text mesages, 12 voicemails!!!
The voicemails wont even tell you the date or time stamp (the time the voicemail was received). After numerous *228 and talking with level 2 over the holidays, I see a huge article on multiple news sites stating Verizon is having data issues... Dropped calls, loss of data, no signal while all our phone keep showing full bars and 3g. Verizon stated its only happening on there 4gLTE system and not 3G but thats a load of crap.
All one has to do is a google search of loss of text messages or voicemails on Verizon and you will see 100's up to 1000's of users like you and me all experiencing the same issues. And not just with Windows Phone 7, but with there baby Driod and iPhone as well.
What really ****** me off is that Verizon loves to play the blame game or pass the buck game. Hard Reset your phone and that will solve the problem... Yeah Right. If this was our OS and we updated a driver that changed the OS in the background I can see that being the solution. But for the 100's or 1000's of users that go to work daily, check there emails and text daily, and haven't changed one thing on the phone... THIS IS UNACCEPTABLE!!!
Now I read an articile for someone extermely close to Microsoft stating that Verizon turned down Nokia's new 4GLTE phone because they have no faith in the operating system and I have to think that maybe behind the scenes Verizon is trying to force us off Windows Phone 7 platform with data issue behind the scene and try to get us all into the Droid Platform which they make 50% of the cash off the phone just like the iPhone...
This is a joke, and I am really starting to think about going to ATT and getting the HTC Titan or the new Nokia 900. I have already research a 3 party app that will allow you to backup and restore your phone. And just read that Microsoft just put out an ad for backup, restore and cloud backup programmers for this latest feature.
Verizon the games need to stop, Verizon you need to stand behind this Platform, Verizon you need to provide better service for all us 3G users!!!
TheJester77

Date issue in a Trinidad form

Similar Messages

Maybe you are looking for