Date load error From ODS to Cube?

Guru's,
Here is a status of data load and suggest me.
Actually we are loading data from ODS to Cube which is full load.This loading is done thorugh process chain and it is loaded for every half an hour.Every time the earlier load will be deleted and next load will be taken to cube.Two days ago the load had gone wrong.When I tried to see cause for the failure in Monitor details I could see Update missing and processing missing.When I see in process chains log view I got info stating some invalid characterstic had appeared.But when I search in PSA the whole of the data packets are green.If there is any invalid characterstics PSA should show a red status.But it is not showing.Please guide me how could I solve this?
point will be definitely awarded for the proper answers.
Thanks in advance.
vasu.

Hi Vasuvasu
Once the edit is done and reloade the sata it wont show u the records in Red..
Hope itz Helps..!
Regards
KISHORE M REDDY
**Winners Don't Do Different things,They Do things Differently...!**
> I dont whink this is with Disk space Y because after
> every full load we are deleting data.

Similar Messages

Delta Load failure from ODS to Cube

Experts,
After CRM upgrade, I had to reinitilized the delta process. In this, I reloaded ODS with first init delta without data and then delta load with new data created in CRM. This worked good so far. After this when I tried to load cube with init. delta without data, no issues. But delta load from ODS to Cube doesn't work. Does anybody have any suggestions, please?
Thanks,
Nimesh
Following error observed in Status for delta load from ODS to Cube.
Error when transferring data; communication error when analyzing
Diagnosis
Data Packets or Info Packets are missing in BW, but there were - as far as can be seen - no processing errors in the source system. It is
therefore probable that an error arose in the data transfer.
With the analysis an attempt was made to read the ALE outbox of the source system, which lead to error .
It is possible that no connection exists to the source system.
Procedure
Check the TRFC overview in the source system.
Check the connection of the source system for errors and check the
authorizations and profiles of the remote user in both the BW and
source systems.
Check th ALE outbox of the source system for IDocs that have not been

Hi,
As far as i understood, you have successful deltas' loading to the ODS and you want to update entire ODS data to the Cube followed by daily delta's.
If this is the case,
Make sure that you have active update rules exist between ODS and Cube.
First goto your ODS and right click and select option 'Update ODS data in data target'.
Select Init update > IT will take you to the init info package where you select init with data transfer (Init with data transfer will bring all the records from ODS to Cube)
Once init is completed ,you can schedule to load delta's regularly form ODS to Cube by following the same steps.
Hope this helps
Praveen
Message was edited by:
Praveen Vujjini

Debugging when data is mooving from ODS to CUBE

Hi Experts,
I am mooving data from ODS to CUBE...!
how to debugg to minimise the loading time.
Thanx in advance.
Vasu

hi Vasu,
put a 'break-point.' in your update rules' routine and
click icon monitor for the request in infocube->manage->request, will go to monitor -> tab 'details' - last node 'processing(data packet' -> right click any data packet and mark 'activate debugging in update rules'.
how to reduce loading time please refer to doc 'data loading and performance analysis'.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1955ba90-0201-0010-d3aa-8b2a4ef6bbb2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3a699d90-0201-0010-bc99-d5c0e3a2c87b
hope this helps.

Automatic loading from ODS to Cube in 3.5

Hi All
I was under the impression that in version 3.5 in order to load delta from ODS to Cube you had to run the 8 series Ipak.
However I have recently noticed that this ipak is running automatically after a delta load into the ODS even when the load is not via a process chain.
Can somebody where and how this setting is maintained.
Regards
A

Hi,
Go to ODS display mode and check if "Update Data Automatically" is ticked in Settings.
Regards,
Kams

Loading from ODS to Cube

I have a process chain for GL.
Data was getting loaded first to ODS and then to CUBE.
Now i there is no update to cube is scheduled. I removed 'Further Update' process from process chain.
During loading I am getting a warning message as follow:
There must be a type "Update ODS Object Data (Further Update)" process behind process "Activate ODS Object Data" var.ACTIVATE_ODSu201D
So plz suggest me any way to remove this warning message.
Thanx,
Vishal

Hi Vishal,
since you removed 'Further Update' process from process chain, this message is comming, i hope instead of this peorcess you are loading dta from ODS to Cube using Infopackge at process chain.
at ODS - setting uncheck setting Further update to data targets (i assume you are loading data from ODS to Cube using Infopackage at process chain).
Best Regards.

Error while loading data from ODS to CUBE.

Hi friends,
When l am loading data from ODS to Cube with help of data mart, I am getting error in QA system , IN DM system ,every thing went well.IF i see the detail tab in monitor under Processing .
Its is showing like this .
Transfer Rules : Missing Massage.
Update PSA : missing massage.
Processing end : missing message.
I have checked the coding in update rules, everything is ok.
Plz any inputs.
hari
Message was edited by:
hari reddy

Might means that IDocs flow is not defined properly in your QA system for myself-SourceSystem.
Regards,
Vitaliy

Error when trying to load data from ODS to CUBE

hi,
Iam getting a short dump when trying to load data from ODS to CUBE. The Run time error is 'TYPELOAD_NEW_VERSION' and the short text is 'A newer version of data type "/BIC/AZODS_CA00" was found than one required.please help me out.

Hi,
Check this thread.........Ajeet Singh has given a good solution here.........
Re: Error With Data Load-Getting Canceled Right Away
Also check SAP note: 382480..................for ur reference............
Symptom
A DART extraction job terminates with runtime error TYPELOAD_NEW_VERSION and error message:
Data type "TXW_INDEX" was found in a newer version than required.
The termination occurs in the ABAP/4 program "SAPLTXW2 " in "TXW_SEGMENT_RECORD_EXPORT".
Additional key words
RTXWCF01, LTXW2U01, TXW_INDEX
Cause and prerequisites
This problem seems to happen when several DART extraction jobs are running in parallel, and both jobs access table TXW_INDEX.
Solution
If possible, avoid running DART extractions in parallel.
If you do plan to run such jobs in parallel, please consider the following points:
In the DART Extract configuration, increase the value of the parameter "Maximum memory allocation for index (MB)" if possible. You can estimate reasonable values with the "File size worksheet" utility.
Run parallel DART jobs on different application servers.
As an alternative, please apply note 400195.
It may help u.........
Regards,
Debjani.......

Error in updating data from ODS to CUBE.

Hi,
I am tryin to load data manually from ODS to CUBE in NW2004s.
This is a flat file load from the datasource to the ODS and then from the ODS to the CUBE.
In the CUBE, I am trying to populate fields by using the ODS fields.
For eg.
In the ODS, a CHAR Infoobject has the data in the timestamp format(i.e. mm/dd/yyyy hh:mm ). I need to split this data and assign them to the two individual DATE and TIME Infoobject in the CUBE.
For this, I have done the coding in the Transfer Structure in the Rule Group.
The time field is gettin populated , but the date field is not getting populated.
I get an error as Eg:
Value '04052007' for CHAR 0DATE is not plausible
Due to this, the corresponding records is not getting displayed
Also, the records where the time id displayed, the date is not getting displayed inspite of the date being correct.
Please help me with a solution for this.
REMOVED
Thanks In Advance.
Hitesh Shetty

Hello Hitesh
SAP accepts the date format in YYYYMMDD, so in the routine where you have concatenate the day month year...just do it in reverse order.....
Thanks
Tripple k

Error while uploading data from ODS to Cube

Hi All,
Will you please help out this issue.As this is a priority high issue,please reply if you know the answers.
I am facing an error while loading the data from ODS to CUBE,the error
is
1.Name is not in the namespace for generated BW Metaobjects
2.Error 18 in the update
And this error is occuring only in quality server.
Thanks,
Ram.

HI RAM SIVA,
make sure that the Data source is replicated and tranfer rules r active.
And also check whether the all transport requests r imported properly.
hope it helps
bhaskar

Error while loading from ODS to CUBE

Hi guys,
I am loading data from source system to ODS and from ODS to CUBE. Ok. The data came successfully from Source System to ODS. But while coming to ODS to CUBE it is showing some error at Data Packet 13. Ok. In CUBE, I loaded the data by using update ODS data to data target, at that time it shows two options like FULL UPDATE and INIT UPDATE. Then I selected FULL UPDATE and then I checked in processing tab there is only one option enabled i.e. only data target. OK and then I loaded it. Now after getting the error where I can correct it. There is no PSA option in monitoring.
Other wise how I can change option in Processing tab of infopackage for PSA. But I know one point that when we load the data from one target to another the only one option available in processing tab is only data target. How can I change that option and how can I correct the error.
Thanks
Rajesh

Hi,
i solved my question like the following.
Go to monitoring of the CUBE and select the option "read every thing as manually" -> then it shows another screen for correcting the records -> correct all the records and load the data again. ok
Thanks
Rajesh

Data loading from ODS to CUBE

Hi All,
I have loaded data from ODS to CUBE. now i have requirement to add some fields in the standard cube. so, for testing purpose i have created copy of the original and created transformation . now when i try to load data from ODS it shows me no more data available . while data is already there in ODS.
now what should i do ? i don't want to delete data from original cube. is there any other way to load data through transformation ?
Regards,
Komik Shah

Hi,
Check the DTP of old cube n see whether its Delta. If yes then check whether any one of the foll is check:
1) get delta only once
2) get data by request.
If 1 is checked then delta wont come for the second cube as it says to get delta once and delta is already in one of the cube.
Generally both should be unchecked but can vary as per requirements.
Now for your new DTP, i dont think it will aloow you to change to FULL.
If its allowing you to select FULL, then select it and select from acive table.
try to load and see.
regds,
Shashank

Error when loading from ODS to Cube

Hello Friends,
I am having trouble loading data from ODS to Infocube in my 2004S system.When loading data i get this message
07/03/2007     13:10:25     Data target 'ODSXYZ ' removed from list of loadable targets; not loadable.
07/03/2007     13:28:42     Data target 'ODSXYZ ' is not active or is incorrect; no loading allowed
I checked for ODSXYZ in my data target but there is nothing by that name.Even the infopackage doesnt have it.What needs to be done.Please help.
Thanks.

Its a expected behavior. When you migrate ur DS, the infopacks associated with it, will grey out all the data targets that they were feeding before, that applies to any infopack you create even after the migration. You womt be able to delete it.
Having said this, this shouldnt impact ur loads from ODS to Cube. As this shoudl be taken care of by ur DTP's rather than ur infopacks.
A few questions:
How are you loading ur cube?
Did the data get thru fine to PSA with the infopack in question?
How did you load ur DSO(assuming the load was successful)?
Message was edited by:
        voodi

How to delete init request when load is taking place from ods to Cube

Dear All,
I have initiated the init load from ODS to Cube, but the init request was not successfull... Now on clicking the init infopkg i get the short dump error....
I am trying to acess this infopkg so that i can delete the old init and reschedule it again...
Now in order to avoid this error i need to delete the init request somehow..... Since data load is happening in BW system only there is no way to go to delta queue and delete the init...
How can i delete the init request in this case or how do i avoid this dumup error???
Thanks & Regards,
Anup

From se11, go to the table, see the content... from this window mark the check box for relevant entries in the first column and click on Display button (F7)
enter "/h" in the command prompt and press enter
Click the top most green button to execute.
From the debugging screen, double click on variable "CODE" change the value to "DELE" (from "SHOW") and save (by pressing enter in bi7 and by clicking pencil icon in bw 3.x ).
Press F8
In the result screen you will find the delete entry in the application bar
Delete one by one after ensuring the record content.
Better you can ask any abaper to delete the table entries in the debug mode coz its a production server..else you can call me 9500066350(I prefer you to go along with abaper if you have no option dont wait for calling).

OFI_AP_4 Delete all data and REINIT the load to FIAP ODS and Cube

Hi bw GURUS I need a quick help, I have requirement to Delete all data and REINIT the load to FIAP ODS and Cube i have data source ofi_ap_4, please tell me what should i do as i know LO extraction but whats is the transaction code to run the set job for FIAP like for Purchasing I have OLI3BW now tell me what will be the steps to reinit the load to fiap ods and cube.
i know this much as below
Delete the data from cube and ODS
Delete the Init in Cube AND ods NOW reinit i mean load the init, but now problem is before doing that i need to run the set up job or tell me what are the steps please
its very important since i am doing in production
thanks
Soniya

You are right by your approach to update from PSA to ODS as u have wrritten before. Just got to PSA tree select the PSA request and choose update Immediatly or scedule for update.
(and if u have 0FI_GL_4 but u r not using it ..it is fine. I was telling that in case u have that and you are trying to use somethin with 0FI_AP_4)

Loading from ODS to Cube in process chain

Hi Experts,
How can I do a full load from ODS to cube when using further processing in process chain? Your help is much appreciated.
Thanks,
Bill

Hi,
You can use a DTP for this.
Create transformation between DSO and cube.
Create DTP and run it.
Loading data from one cube to another cube.
Cube to cube data loading
how to upload data from cube to cube
Can we pull data from one cube to another cube
Data Load Steps:
Reading data from another cube
Hope this helps.
Thanks,
JituK

Date load error From ODS to Cube?

Similar Messages

Maybe you are looking for