Date management,Status Management,Action Management

Hi experts ,
This is Madhusudan,I have godd conseptual knowledge on Datemanagement,Status Management,Actiona Management,but I would like to know how to configure these things in CRM.
Thanks nad regards
Madhusudan

Hi Madhusudan,
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c87bb93d-0b01-0010-a0b4-b04d7fda745f">Action Management</a>
<a href="http://help.sap.com/saphelp_crm31/helpdata/en/d4/fce93a29768802e10000000a11402f/frameset.htm">Date Management</a>
<b>Reward points if it helps.</b>

Similar Messages

Data Manager not available in the BPC 7.0 Action Pane

Hi,
I have just installed BPC 7.0 and everything is working fine, except I don't have access to the Data Manager.
According to the BPC guide, this is how to start Data Manager:
1. Click the Business Planning and Consolidation icon on your desktop.
2. From the Business Planning and Consolidation launch page, select Business Planning and Consolidation for Excel.
3. From the Getting Started - BPC for Excel action pane, select Manage Data.
I don't have "Manage Data" as an option in the Action Pane. The options I have under Available Task Categories are: "Reporting & Analysis", "Journals" and "Open System Reports".
I also do not have a menu called eData.
Any ideas on what I can do?
Thanks,
Sam

Please check your task profile....
Make sure you have all task profile related to data manager....do let us know if youstill face this problem

Travel Expense Manager (PR05): Trigger "Add Data Maintain:Status" upon SAVE

Hi TM Gurus,
Good day.
The "Add Data Maintain: Status" Screen can be manually accessed by clicking the "Trip Status" Button in PR05.
Can you kindly confirm if it's possible to automatically trigger the "Add Data Maintain:Status" Screen via configuration when clicking the save button in Transaction PR05 - Travel Expense Manager?
Thank you very much.
Best regards.
Rainnier

Hi Sally,
Good day.
I will now tagged this as answered. Thanks again for your help on this.
On the other hand, I have another question: The"Add Data Maintain: Status" Screen now appears but with the default Settlement Status is "Open". Do you happen to know if this can be changed via configuration to "To be settled"?
Can you please answer this ar this link: Travel Expense Manager (PR05) "Add Data Maintain:Status" upon SAVE
Thank you very much.

PLM7.02: Status & Release Management/ Status and Action Management

Hello,
                I´d like to know if anybody worked with Status & Release Management. And has some example to how we can customize: SAM (Status and Action Management) in “Define Status Scheme” transaction.
                How it´s works the relationship with: Status: Attributes, Status: Field values, Scheme Definition, Attributes: Definition.
                I´ll appreciated if you could give me a simple example of this functionality.
                Thanks in advance.
                Best Regards from Brazil.
                Rodrigo Arai

Hi Rodrigo,
in a nutshell:
- you can define status network based on objects (w.g. material)
- Define Attributes: you can define attributes like DELETION_ALLOWED or LOCKED_FOR_CHANGE and you can implement preconditions in custom classes when should it happen
- Define Status Field: you can define some fields which are related to the status. e.g. in recipe management RCP_USAGE
- Status: you can define the different statuses (e.g. in process, completed..) with attributes
- Scheme Definition: you can define the logic between statuses. E.g. you would like to swith from status In Process to Completed and from New to In Process. Then switching from New to Completed is not possible for the user.
- Subobject Type Scheme only applied if you have subobjects
here you can find the customizing documentation, there are some examples as well:
Define Status Scheme
Use
In this Customizing activity, you define statuses and status schemes for object types and corresponding attributes.
For each status, you can define which attributes are allowed to be set for an object with this status assigned.
The status scheme defines the initial status and the possible transitions from one status to another.
Activities
You define status schemes as follows:
1. Select the required object type and enter the following:
a) An identifier
b) An object type class (Note: this class should implement the interface class)
c) A subobject type search help
The search help provides a list of all possible subobject types. This feature enhances the usability while maintaining status schemes at subobject-type level.
d) If the
Status
tab page shall be visible on the PLM Web UI, select the
Status Tab
checkbox
Status and action management is a reusable object. It has been modeled as a dependent object. The prerequisites to enable status and action management for any new objects are:
Add the Status and Action Management tab page on the UI.
Enable the Status Tab checkbox in this Customizing activity.
2. Select the required object type and define the following attributes for it:
a) An object type
b) An attribute identifier
c) An attribute description
d) An attribute type
e) Select a precondition class (Note: This class should implement the '/PLMB/IF_SAM_PRECONDITION' interface)
3. Define the technical status field name.
When you change the object status, the system updates the technical status field names to the new values made in these settings.
4. Select object type and define corresponding statuses.
a) Select the status and define the corresponding object type, an identifier, description, and status icon.
Note:
You cannot define new statuses for materials and material BOMs. For these objects, all values should be transferred from the back-end system.
You can import the status values from the back-end system as follows:
b) Select the object type that represents a material or a MatBOM.
c) Select
Status
in the dialog structure.
d) Choose the
New Entries
pushbutton.
e) Choose the
Import Status
pushbutton.
Note
The system imports the following status values into SAM:
For material: the
X-plant matl status
(cross-plant material status)
For MatBOM: the header status
Although you cannot change the imported value for a material or a MatBOM, you can change its name and description to conform to SAM terminology.
You can differentiate between the following cases for objects whose status values are imported from the back-end system:
The object was not created on the PLM Web UI, but in the back-end system; no SAM status scheme or status was assigned, but a status value was set in the back-end system.
If you assign a SAM status scheme to this object later on that contains the equivalent imported status values, the SAM status value is set accordingly, even if any precondition check results of the SAM status scheme may exist.
The object was created in the back-end system or on the Web UI and a SAM status scheme is assigned to the object on the PLM Web UI.
If the corresponding status value is changed in the back-end system, then existing SAM preconditions for this status transition and allowed status transitions are checked. If the preconditions are not fulfilled, a message is raised and the new status cannot be saved.
5. Specify which attributes are allowed for each object type when the chosen status is set.
a) Select a status and open the
Attributes
screen.
b) Choose an object type.
c) Choose an attribute.
6. Define whether values from other technical fields are affected by setting this status.
a) Select a status and open the
Field Values
screen.
b) Select an object type.
c) Select a technical field name.
7. Specify the status scheme. The status scheme defines the initial status and status transition for the object type. For example, below is a list of standard status schemes defined for iPPE object types.
Assembly Header - PLM_PPEAH
Assembly Item - PLM_PPEAI
Product Item Variant - PLM_PPEPIV
Product Variant - PLM_PPEPV
You can also create schemes for the object type as follows:
a) Specify an identifier and description for the status scheme and set one of the statuses defined above as the initial status.
b) Select the status scheme and open the
Transitions
screen. Enter all possible status transitions by specifying the source (
Status From
) and target status (
Status To
c) Select the
Long Text
checkbox if you want the system to open the long text editor on the
Status
tab in the PLM Web UI. You can use the long text editor to create notes for this transition.
8. Define the scheme at subobject-type level by entering following parameters:
a) Object type
b) Subobject type (You can choose from the list of subobject types you have specified when defining the search help in step 1)
Alternatively, you can define a default status scheme that is automatically displayed on the
Status
tab.
The following statuses are included in the standard delivery:
10 - In Work
20 - For Approval
LINKED_DIR
LINKED_MAT
LOCKED_FOR_CHANGE
REPLACE_PH_ASSEMBLY (only in the PLM_PPEAI assembly item and the PLM_PPEPIV product item variant)
30 - Released For Planning
LOCKED_FOR_CHANGE
40 - Released
RELEASED
SUB_ITEM_STATUS
The following status transitions are possible:
FROM
TO
Long Text checkbox (dialog box for notes)
10
20
20
30
30
40
20
40
20
10
X
30
10
X
40
10
X
More on SAP help:
Status and Action Management on the Web UI - SAP Library
Best regards
Tamas

Work status Data Manager

Hello!
We can run a package from Data Manager on periods that have the status of "Locked"
We have a package with the following script:
'DEBUG(ON)
PROMPT(SELECTINPUT,,,"Please select category, entity and time for restatement","%CATEGORY_DIM%%TIME_DIM%%CURRENCY_DIM%")
TASK(Execute formulas,USER,%USER%)
TASK(Execute formulas,APPSET,%APPSET%)
TASK(Execute formulas,APP,%APP%)
TASK(Execute formulas,SELECTION,%SELECTIONFILE%)
TASK(Execute formulas,LOGICFILE,%APPPATH%\..\AdminApp\%APP%\FXCONSOL_Restatement.lgx)
TASK(Execute formulas,RUNMODE,1)
TASK(Execute formulas,LOGICMODE,1)
TASK(Execute formulas,CHECKLCK,1)
The logic used are as follows:
*INCLUDE SYSTEM_CONSTANTS.LGL
//Kr omflyttning av obeskattade reserver
*INCLUDE ObeskRes.lgf
// Kr berkningar av elimineringar och konsolidering
*RUN_STORED_PROCEDURE = SPRUNCONSO('%APP%', [%KATEGORI_SET%], [%GRUPP_SET%],'%SCOPETABLE%','%LOGTABLE%')
*COMMIT
*INCLUDE Calculations_H2.LGF
If we use this package in Data Manager for a period which has the status of "Locked" the package will run. Should not this be stopped because we have the status of "Locked" on the period and the script says that it will check Work Status

Hi Daniel,
'Normal' logic should listen to the 'locked' settings. Please double check the workstatus settings to see if DM=locked is correct for the 'locked' workstatus.
BUT:
The businessrules stored procedures do not listen to these settings. Most SP calls have there own locking methods.
For example the SPRUNCONVERSION call is as follow:
*RUN_STORED_PROCEDURE=SPRUNCONVERSION(u2018APPLICATIONu2019,u2019CATEGORY_SET%u2019,
u2019%CURRENCY_SET%u2019,u2019GLOBALu2019,u2019%SCOPETABLE%u2019,u2019%LOGTABLE%u2019,impact,destination,
ratedimension,maxstatus)
The maxstatus setting here is the maximum status which allows change of data.
The one exception here is SPRUNCONSO which can not be prevented from running and storing data.
Normally this is good behaviour;
SPRUNCONSO doesn't change LC data and shouldn't therefore not calculate other numbers than the previous run.
The behaviour of other sp's could/must sometimes be different then normal datamanager packages; for example when the status is submitted, users should not be able to upload/clear data, but should be able to run conversion and consolidations, that is why the sp's have there own locking section in the call itself.
Alwin

Travel Expense Manager (PR05) "Add Data Maintain:Status" upon SAVE

Hi TM Gurus,
Good day.
In PR05, The"Add Data Maintain: Status" Screen appears upon saving with the default Settlement Status set to "Open". Do you happen to know if this default value can be changed via configuration to "To be settled"?   If yes, can you provide steps on how to do this?
Thank you very much.
Best regards.

Customising in TRVPA via PE03 also should help you achieve this as you have option for "Open" or "To be Settled!
Entry "WRP" for the SAP EP interface:
The entry "WRP" allows you to control the dialog for saving a trip. The
settings apply to the travel services in the SAP EP interface. With some
statuses, a distinction must be made between the process steps Temporary
Save and Save and Send.
Possible values:
o   0 = Trip saved temporarily -> "Trip completed" + "Open"
             Trip saved with "Save and Send" -> "Trip completed" + "To
     be settled"
o   1 = Trip saved temporarily -> "Request Entered" + "Open"
            Trip saved with "Save and Send" -> "Request entered" + "To be
     settled"
o   2 = Trip saved temporarily -> "Request entered" + "Open"
            Trip saved with "Save and Send" -> "Request approved" + "To
     be settled"
o   3 = Trip saved temporarily -> "Trip completed" + "Open"
           Trip saved with "Save and Send" -> "Trip completed" + "To be
     settled"
o   4 = Trip saved temporarily -> "Trip completed" + "Open"
                   Trip saved with "Save and Send" -> "Trip approved" +
     "To be settled"
o   5 = Trip in the future (end date later than creation date)
              -> Trip saved temporarily -> "Request entered" + "Open"
             Trip saved with "Save and Send" -> "Request entered" + "To
     be settled"
             Trip in the past (end date earlier or same as creation date)
             -> Trip saved temporarily -> "Trip completed" + "Open"
             Trip saved with "Save and Send" -> "Trip completed" + "To be
     settled"

Problem in the uplaod through the Data manager

Hai Experts ,
Recently we upgrade BPC from 5.1 to 7.5 verison .
When we try to upload the data thorugh the data manager . Data is accepted , but showing error
Error :
TOTAL STEPS 2
1. Convert Data:          completed in 0 sec.
2. Load and Process:      Failed in 18 sec.
3. Import:                completed in 18 sec.
[Selection]
FILE=\OLAM\MIS\PrivatePublications\olamsapbpc\DataManager\DataFiles\MISPNLMANTRA2011.DEC.csv
[Messages]
Convert Data
Success
Record Count : 13
Accept Count : 13
Reject Count : 0
Skip Count   : 0
Logic Error of Load and ProcessError
some records are rejected by work status
I checked the Work status all the period has been unlock .
Please guide me , we strucked ...
Need check in the Default Logic

Hi,
The solution is mentioned in the note :1374381
To check WORK STATUS by business rule, the business rules stored procedures will use [%SCOPETABLE%] as one of the parameters, because the fundamental design of work status is different from V4. Therefore, the WORK STATUS setting from Web admin is good enough to apply WORK STATUS to business rules. And MAXSTATUS will not be used from 7.5M anymore.
[Remarks]
However, since the [%SCOPETABLE%] variable is needed to check WORK STATUS, some of the stored procedures must be changed to include the variable at the end of the parameter. Please refer to below stored procedures to see how to set the variable.
- Intercomany booking
    *RUN_STORED_PROCEDURE = SpICData(...,[%SCOPETABLE%])
    *RUN_STORED_PROCEDURE = SpICBooking(...,[%SCOPETABLE%])
- US Elimination
    *RUN_STORED_PROCEDURE = SpRunElim(...,[%SCOPETABLE%])
[Note]
1. If there are records which are rejected by work status, all of the records calculated by the data package are not inserted. And an error message is returned, and states the reason with specific work status details why they failed to post.
2. When running on multiple time periods, calculated records in unlocked periods are inserted even though records in a previous period are rejected.
[Additional Info.]
To apply this fix for Business Rules Stored Procedures, select any application and run "Modify Application" without checking any options in the action pane.
Regards,
Anil Kumar Sharma .P

Unable to access the data from Data Management Gateway: Query timeout expired

Hi,
Since 2-3 days the data refresh is failing on our PowerBI site. I checked below:
1. The gateway is in running status.
2. Data source is also in ready status and test connection worked fine too.
3. Below is the error in System Health -
Failed to refresh the data source. An internal service error has occurred. Retry the operation at a later time. If the problem persists, contact Microsoft support for further assistance.
Error code: 4025
4. Below is the error in Event Viewer.
Unable to access the data from Data Management Gateway: Query timeout expired. Please check 1) whether the data source is available 2) whether the gateway on-premises service is running using Windows Event Logs.
5. This is the correlational id for latest refresh failure
is
f9030dd8-af4c-4225-8674-50ce85a770d0
6.
Refresh History error is –
Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: The operation has timed out. Errors in the high-level relational engine. The following exception occurred while the
managed IDataReader interface was being used: Query timeout expired.
Any idea what could have went wrong suddenly, everything was working fine from last 1 month.
Thanks,
Richa

Never mind, figured out there was a lock on SQL table which caused all the problems. Once I released the lock it PowerPivot refresh started working fine.
Thanks.

Unable to refresh SQL Server data source through Data Management Gateway

I just installed the version 1.1.5226.8 of Data Management Gateway and tried to refresh a simple query on a table connected to SQL Server, with no transformations in Power Query.
This is the error I obtain:
Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: transfer service job status is invalid.
I am wondering whether my Power BI is still not updated to handle such a connection type, or there could be something else not working?
I correctly created the data source in admin panel following instructions in Release Notes, and
test Power Query connection is ok.
Marco Russo http://www.sqlbi.com http://www.powerpivotworkshop.com http://sqlblog.com/blogs/marco_russo

I made other tests and I found important information (maybe there is a bug, but read the following).
The functions DateTime.LocalNow and DateTime.FixedLocalNow
work correctly, generating these statements to SQL Server:
    convert(datetime2, '2014-05-03 06:37:52.1135108') as [LocalNow],
    convert(datetime2, '2014-05-03 06:37:52.0525061') as [FixedLocalNow],
The functions DateTimeZone.FixedLocalNow, DateTimeZone.FixedUtcNow,
DateTimeZone.LocalNow, and DateTimeZone.UtcNow
stop the scheduled refresh with the error I mentioned
in my previous messages, generating these statements to SQL Server:
    '2014-05-03 06:37:52.0525061+02:00' as [TZFixedLocalNow],
    '2014-05-03 04:37:52.0525061+00:00' as [TZFixedUtcNow],
    '2014-05-03 06:37:52.1135108+02:00' as [TZLocalNow],
    '2014-05-03 04:37:52.1135108+00:00' as [TZUtcNow]
I solved the issue by placing the DateTimeZone calls after a Table.Buffer call, so query folding does not translate in SQL these functions. However, it seems like something to fix.
Marco Russo http://www.sqlbi.com http://www.powerpivotworkshop.com http://sqlblog.com/blogs/marco_russo

Data Manager Packeage and Process chain si not working

Hi All,
I executed a data manager package which contain a process chain to revaluate the one of my Account dimension meneber Say "Revenue". I am working on BPC NW 7.0
steps I followed:
1. I created a script logic file and created a custom process chain.
process chain steps:
a) Start variant
b) Modify dynamically
c) Run Logic
d) Or and Clear BPC tables
2. This process chain was included in data manager package.
3. Data manager package was modyfied to include parameters and scipt logic file name.
4. executed data package
The issue is " when I execute Data manager Package" I dont get any error but when I View status I dont see any pachage running or completed. If I see Process chain, It is failing at first step of Modify dynamically..no clue?
Could you please let me know what could be a issue?
Cheers,
SAC

I encounter this problem, Do this Steps:
I. First,check if your process chain is existing in the Library.
II.If yes,follow the steps below:
1. Edata - organize Package - Modify your Package.
2.Check if you had the correct process chain.
3.IF yes, Click View package at its right side.
4.Expand the Task Folder and take note of the Task Name (e.g. ZBPC_PROT_RUN_LOGIC)
5.click Advance,Compare the task name that you noted in the syntax TASKS
(e.g. TASK(ZBPC_PROT_CF_RUN_LOGIC,SUSER,%USER%)
6. It should be the same.
Running package but not appearing any status happens when the system cannot find your process chain.
hope this helps,

MDM data manager

hi experts,
i could not work with data manager, the error is prompting by telling that it cannot load the repository. can anyone will help me in solving this error.
thanks,
kannan.

Hi Kannan,
Data Manager can only connect to repositories that are loaded and running on a running MDM Server. To check this, you have to use MDM Console:
1. Start MDM Console and mount your MDM Server. A green arrow icon before your server name indicates that your MDM Server is running. If not, start the MDM Server.
2. You'll see a list of repositories available for this server. If your repository is not visible, you have to mount it first. You can do so by right-clicking on the server and choose the action from the context menu. If your repository is visible, login to the repository and check the repository state. Again a green arrow icon before your repository indicates that the repository is loaded. If not, load the repository! As soon as your repository is running, you can conntect to it with the Data Manager.
BR Michael

Error in process chain when running package (data manager)

Hello experts,
I try to run the following how to : "move date between applications using Data Manager ..."
Yon can find the pdf here : http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0480970-894f-2d10-f9a5-d4b1160be203
I'm looking after someone who used it successfully, on my side after implementing all steps and running the package I get the message "IMMEDIATE RUN: Request to run the package on the server was successful The package is now running"
When I look the log for the process chain, overall status of the process chain is yellow, and steps "modify dynamically" and "clear BPC Tables" are in error.
I can't get any usefull error messages.
If someone has an idea to have details about those errors, it will be appreciated.
Points will be awarded, thanks in advance.
Guillaume P.

Hello Experts,
I am also facing the same issue with PC failing at Modify_Dynamically step....
This process type is working fine when used in standard delivered process chain to load transaction data.
I tried using this variant in my cutsom chain, but it fails.
Please suggest.....
Thx....D

Problem in mapping from import manager to Data manager

hi friend's....I got a problem while mapping the data from import manager to Data manager .The problem is the data in import manager (i.e source hierarchy) will map to single filed in data manager ( i.e target hierarchy)..
Help me it will be great full to me
Regards
Yugandhar

Hi Ana,
If you have a hierarchy in this format:
N1            N2                 N3
A              A1                 A11
A              A2                 A21
A              A3                 A31
B              B1                 B11
Then u have to follow these steps for import.
1. Select source file and destination hierarchy table at top of import manager.
2. Go to Partitions tab (Second tab) Just above the tabs, if u click on the plus sign against your source file, you will see N1, N2 and N3. Cick on N1 and in partition tab, add N2 to right side by double clicking on N2.
3. Now add N3 to right side by double clicking on it.
4. Go to field mapping (Third tab). There you will see a field N1(Partition). Map this field to yourhierarchy field on destination side.
5. In value mapping (Below the field mapping), Expand your source hierarchy. Select all (ctrl + A). Click on "Add" button. Select "Add Branch as child" option.
6. Go to Matching tab (Fourth tab). only one field will be there. take ity on the right side. and select the import action as "Create".
7. Go to last tab. Click on import button.
Your hierarchy has been imported. You can check it in data manager (in hierarchy mode).
Hope this solves your problem.
Regards,
Dheeraj.

MDM Data Manager step-by-step process with an example

Hi All,
I recently started reading MDM. I am clear with MDM-Console concepts. But I have problem with MDM Data Manager. I am confused with data entries in qualified tables, work flows(using microsoft studio), Matching mode- rules(High treshold, low threshold) etc.. I read material posted in forums- but still I am not clear.
I need a step-by-step process for data entries with *examples*. A good example which covers all Data Manager concepts. PDF's with screen shots, videos any thing would help.
Please help me......It would be of great help.
Thanks in Advance.
Suchir

Hi Suchir ,
MDM 5.5 has 4 MDM clients to perform 4 main functionality on the MDM master records.
- Console- This is where all the Administrative work is performed
- Data Manager- This is where the actual maintainence work is done on the master data like consolidation deduplication etc.
- Import manager- Thsi is from where the source matser records are taken into MDM repoistory
- Syndicator- This is from where teh consolidated master data is send back to the target systems.
MDM Data Manager is the heart of MDM
The activities that can be performed in the MDM Data manager are:
- Data Consolidation
- Data Validation
- Data Deduplication
- Data Assignment
- Data Governanace
etc......
Qualified Table:
- Qulaified tables are used to store relational records where one field value is determining the other field or fields value.
- Qualified tables are maintained in Console and can be viewed in Data Manager
- Qualified Table are viewed under a separate section in Data Manager in the right hand side.
- Qualified table has Non qualifiers and Qualifiers.
- Non qualifiers can be seen in the Qualified table and in the linking Qualified field
- Qualifiers can be seen separately under the Qualified section in the data manager
Kindly refer the below link to know more on this:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00a15239-684e-2b10-b8ae-b936b7d1c1fe
Workflows
- Workflows are designed in MDM for Governanace
- You can create the MDM workflow using the MS Visio 2003 stencils in the MDM Data manager in the record mode under the workflow table
- The saved workflow in DM can then be executed either mnaully or automatically based on teh trigger actions
- The trigger action for teh MDM wf are record Add,Update,Import,Manual
Kindly refer the below link to know more on this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60559952-ff62-2910-49a5-b4fb8e94f167 (MDM Workflows Overview)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90990743-91c0-2a10-fd8f-fad371c7ee40 (Demo of MDM Workflows)
Matching Mode
- This mode is exclusively for Master data deduplication
- We need to create Rules,Strategies,Transformation in MDM data manager in teh record mode
- Then you need to run these strategies on the selected records
- Based on your score and threshold set in the strategy MDM will identify duplicate records
- This score will be seen in teh Matching mode
- Colour coding is used along with scores to find out dupliactes
- Green - 100%dupliacte Blue- 50?% Red- No duplicate
Kindly refer the below link to know more on this:
/people/michael.reil/blog/2006/05/18/mdm-matching-strategies-for-master-data-consolidation (matching merging in mdm)
Hope It Helped
Thanks & Regards
Simona Pinto

Debugging LCDS Data Management from Flexbuilder3 on Tomcat does not work

I have a sample with Data Management and when i use it on my tomcat it works fine. But i can´t debug it from flexbuilder 3. When i start it from the flexbuilder i get the connection and then i crashed with "No registered fault handler or token responder - throwing an error for destination:"
It is the same tomcat i use to run standalone.
is it a problem with the context.xml?
[SWF] /flexine/dataService_wt2.swf - 1.422.965 bytes after decompression
'cds-consumer-sandwich-null' consumer set destination to 'sandwich'.
Configuration for destination='sandwich':
New DataService for destination: sandwich
DataService.fill() called for destination: sandwich with args: []
'4A853118-F24B-5FE2-BF01-FCDFF6C93161' producer set destination to 'sandwich'.
Creating a new independent data store for destination: sandwich
Adding data service: sandwich to the data store: null initialized: false
Finished validating destination: sandwich loadOnDemand/paged associations: [] sub-types:
data store: null is initialized
'my-rtmp' channel endpoint set to rtmp://localhost:2038
'my-rtmp' channel settings are:
'ds-producer-sandwich' producer sending message '52AF7949-7B16-7C8E-3B87-FCDFF6F8D3A2'
'my-rtmp' channel got connect attempt status. (Object)#0
code = "NetConnection.Connect.Success"
description = "Connection succeeded."
details = (null)
DSMessagingVersion = 1
id = "E35ECC7A-710F-4D9B-A507-330FDD83B283"
level = "status"
objectEncoding = 3
'my-rtmp' channel is connected.
'my-rtmp' channel sending message:
(mx.messaging.messages::CommandMessage)
body=(Object)#0
clientId=(null)
correlationId=""
destination="sandwich"
headers=(Object)#0
messageId="CDC66303-F24B-1E87-4103-FCDFF8211298"
operation="client ping"
timeToLive=0
timestamp=0
'my-rtmp' channel sending message:
(mx.data.messages.DataMessage)
messageId = '52AF7949-7B16-7C8E-3B87-FCDFF6F8D3A2'
operation = fill
destination = sandwich
identity = (null)
body = []
headers = {}
'ds-producer-sandwich' producer connected.
'ds-producer-sandwich' producer acknowledge of 'CDC66303-F24B-1E87-4103-FCDFF8211298'.
'ds-producer-sandwich' producer acknowledge of '52AF7949-7B16-7C8E-3B87-FCDFF6F8D3A2'.
'ds-producer-sandwich' producer fault for '52AF7949-7B16-7C8E-3B87-FCDFF6F8D3A2'.
Dispatching fault event for destination: sandwich
No registered fault handler or token responder - throwing an error for destination: sandwich
[RPC Fault faultString="There was an unhandled failure on the server. javax/transaction/SystemException" faultCode="Server.Processing" faultDetail="null"]
     at mx.data::ConcreteDataService/http://www.adobe.com/2006/flex/mx/internal::dispatchFaultEvent()[C:\depot\flex\branches\enterprise_corfu_b2\frameworks\projects\data\src\mx\data\ConcreteDataService.as:2401]
     at DataListRequestResponder/fault()[C:\depot\flex\branches\enterprise_corfu_b2\frameworks\projects\data\src\mx\data\ConcreteDataService.as:6970]
     at mx.rpc::AsyncRequest/fault()[E:\dev\3.0.x\frameworks\projects\rpc\src\mx\rpc\AsyncRequest.as:103]
     at NetConnectionMessageResponder/statusHandler()[E:\dev\3.0.x\frameworks\projects\rpc\src\mx\messaging\channels\NetConnectionChannel.as:523]
     at mx.messaging::MessageResponder/status()[E:\dev\3.0.x\frameworks\projects\rpc\src\mx\messaging\MessageResponder.as:222]

Here's an update for future victims doing google searches :-)
The issue appears to be related to compiz. When I'm doing basic 2D desktop with metacity everything simply rocks: the machine suspends/resumes with no issues.
When compiz is enabled, there is about 10 second delay after resume, during which the screen is black and you better not touch the keyboard! If I sit and wait for 8-12 seconds, the dark screen goes away GDM login dialog shows up. But if I touch the keyboard or the touchpad, it will either freeze or become exceptionally slow.

Date management,Status Management,Action Management

Similar Messages

Maybe you are looking for