Date migration from Legacy system (excel file) to CRM 7.0
Hi,
Can any one guide me on the below:
I am provided with excel files having prospect data with 63 fields and most of them are not the part of standard fields available.
The requirement is to create the same data in CRM. I am unable to use ELM as most of the fields are not available. I suppose i need to get the fields created by technical team. However need some knowledge sharing on this. I think even BAPI approach would need fields to be created first.
Should i revert back to the client asking for detailed information on the tabs or sections under which the missing fileds have to be created?
Also guide me with alternate solution to map the data from legacy to CRM
Please mark your solution on this
thanks
Agarwal,
In your situation you need to have the additional attributes created in CRM, before you can do an upload. Now if the new attributes are marketing attributes for the business partner, you can use ELM. Otherwise if you still want to do ELM then you need to use the BADI.
Your other option is use XIF adapter with LSMW to perform the upload, but the custom fields must appear in the bdoc structure on the CRM for them to appear. Normally this won't be a problem if the CRM system has been extended via EEWB or AET.
Take care,
Stephen
Similar Messages
-
Data migration from legacy system to SAP
hi all,
could you please post some docs on migration from legacy system to SAP system., also the problems faced while migration and best practices in data migration
regards
sridharanHi ,
I require few details from you.
1. What ETL tool you are using, If Informatica, it already have PowerConnect to connect to SAP. So you can create source and Target Structure and also you can use RFC's to send data to R/3. Else, for other ETL tools, can you prepare RFC's or any other way to send data to R/3. let me know the tool.
2. Does R/3 contains the master data tables? If yes, then try to use LSMW for Mass upload of data to tables.
If your client don't want to use either of these options please elaborate, what is the case.
Regards
Aashish Sinha -
Data Migration from Legacy system to ECC systems via ETL through SAP PI
Hi All,
I wanted to know if we can migrate the data from Legacy systems to ECC systems via PI.
What I understand is there is ETL tool is used to extract the data from legacy system, and what client is looking to load that data via PI?
Can we do that ? I am concerned because this will involve mass data?
If I have to use PI , I see option of PROXY / IDOC /FILE as receiver in ECC system (take the data from ETL)?
Can somebody has done this earlier , please share the approach.
Thanks,
Pushkar PatelHi ,
I require few details from you.
1. What ETL tool you are using, If Informatica, it already have PowerConnect to connect to SAP. So you can create source and Target Structure and also you can use RFC's to send data to R/3. Else, for other ETL tools, can you prepare RFC's or any other way to send data to R/3. let me know the tool.
2. Does R/3 contains the master data tables? If yes, then try to use LSMW for Mass upload of data to tables.
If your client don't want to use either of these options please elaborate, what is the case.
Regards
Aashish Sinha -
Data Migration from Legacy System in IS-U
Hi All,
We are going to Implement a new IS-U project, I have a problem with LSMW(Legacy System Migration Workbench ), I have some Conversion Objects of IS-U and I need to know whether Data Migration is possible or not, please tell me how to find these Objects and how to know Data Migration is possible or not.
Objects are like.,
1. Accounts
2. Actuate Reports
3. Business Partner Relationships
4. Active Campaigns/Campaign Content/Dispositions
5. Connection Object
6. Contacts
7. Contracts
8. Opportunities
9. Payment Arrangement History
10. Payments
11. Premises
12. Rate Changes
13. Security Deposits
these are few and there are some more..,
Thanks in Advance,
Sai.Hi Ram,
Use Transaction Code EMIGALL. It will ask for company code. By default Company Code is SAP. If you entered with the SAP you will get all the objects.Then goto menu IS-U Migration-->User Handbook. It will give you details Idea.
Also Check the following Procedure
You can find detailed documentation of EMIGALL in SAP itself. Use Transaction EQ81 to display it. It provides all the concepts and procedures to work with EMIGALL.
Here are some points about EMIGALL :
1. It Migrates data Business Object wise
2. It uses Direct Input Technique
3. It has more than 100 objects of IS-U
and the steps for implementation goes like this:
1)You have to create a user specially for migration which will have all the authorizations related to migration workbench, BASIS and IS-U
2)You have to create your own company in EMIGALL. There is a default company called SAP.
3)Company SAP contains all the Business Objects
4)You have to figure out what business objects u need and then u have to copy those business objects to ur company from Standard Company SAP
5)Each objects contains more than one structure and each structure can contain more than one fields. The relation goes like this
Object ---> Structure ---> Field
6)You have to define field rules for each required field of the object. You have to mark "Not required" for fields u don't need
7)After field rules for a given object is set u have to generate load report i.e. actual Direct Input Program which will migrate data. This program is generated on basis of field rules set by u.
8)After the load report is generated u have to prepare an input file (import File) for migration. The import file should be according to structure provided by SAP and must be in binary format. SAP Provides the structure of file according to your configurations. You have to write ur own Data conversion program(in any language) for this task.
9)You take import file as input and migrate the data using generated load program
10)Finally u can check the Migration Statistics and Error Log
Thanks and Regards,
Jyotishankar Dutta
Message was edited by:
Jyotishankar Dutta
Message was edited by:
Jyotishankar Dutta -
Data Migration from Legacy System in CRM
Hi All,
We are going to Implement a new CRM project, I have a problem with LSMW(Legacy System Migration Workbench ), I have some Conversion Objects of CRM and I need to know whether Data Migration is possible or not, please tell me how to find these Objects and how to know Data Migration is possible or not.
Objects are like.,
1. Accounts
2. Actuate Reports
3. Active Campaigns/Campaign Content/Dispositions
4. Contacts
5. Contracts
6. Opportunities
7. Payment Arrangement History
8. Payments
9. Premises
10. Rate Changes
11. Security Deposits
12. Business Partner Relationships
13. Web self-service information
14. Usage that has been used for quotes
15. Tax history information, including AXCIS
17. Service Requests
18. Service Order History
19. Security Deposits
20. Reference Values
21. Rate Changes
Can anybody please tell any transaction code in CRM where can I find the Data migration for the above objects is possible or not.
Thanks in Advance,
Sai.Hello,
for migration into CRM I would suggest the 'XIF-Interfaces'; these are interfaces provided in CRM for connection to external systems. I'm not sure if this will cover all objects mentioned above, but at least some of them should exist.
Some information about existing interfaces can be found in the integration repository under http://ifr.sap.com/index.html; from the start screen first select 'Enter the repository' and then have a look under 'generic components' and 'SAP CRM'.
Regards, Katja Ohliger -
AR & AP Data migration from legacy
Hi,
1.What are the precaution to be taken for Data migration from legacy system?
2.We intend to use a conversion ac ( Dr conv ac cr Vendor ) Is it Correct way of doing it ?
3.How do i ensure that all my invoices uploaded correctlt ?
4.What is the best Standard program to get it doen ?.
5.Is LSMW is best to do it or shall I have to go for custom development?
Any piece of yr advice is appreciated.
Thanks, ChitraHi Chitra,
Following link are helpful in understanding LSMW:
Note 105244 - LSMW 1.0: known problems, tips and tricks
Re: LSMW and error handling
/community [original link is broken]
For Data Migration:
Note 400257 - Data Migration and Upload Report
Note 739860 - Data migration from a legacy system to SAP
Hope this helps.
Please assign points as way to say thanks -
Data load from Legacy system to BW Server through BAPI
Requirements: We have different kind of legacy systems and SAP BW server. We want to load all legacy system data into SAP BW server using BAPI. Before loading we have to validate all data. If there are bad data, data missing we have to let the legacy system user/ operator knows to fix the data into their system with detail explanation. When it is fixed, we have to load the data again.
Load Scenario: We have two options to load data from legacy systems to BW Server.
1. We need to load data directly from legacy system to BW Server using BAPI program.
2. Legacy Systems data would be in workstations or flash drive as .txt (one line separated by comma) or .csv file. Need to load from .txt /.csv file to BW Server using BAPI program.
What we want in the BAPI program code?
It will Read / Retrieve data from text / csv file and will put into the Internal table. Internal table structure would be based on BAPI InfoObject structure.
Call BAPI InfoObject function module BAPI_IOBJ_CREATE to create InfoObject, include all necessary / default components, do the error check, load the data and return the status.
Could some one help me with the sample code please? I am new in ABAP / BAPI coding.
Is there any other better idea to load data from legacy system to BW server? BTW we are using BW 3.10. Is there any better option with BI 7.0 to resolve the issue? I appreciate your help.my answers:
1. this is a scendario for a data push into SAP BW. You can only use SOAP-Based Transfer of Data.
http://help.sap.com/saphelp_nw04/helpdata/en/fd/8012403dbedd5fe10000000a155106/frameset.htm
(here for BW 3.5, but you'll find similar for 7.0)
In this scenario you'll have an RFC dinamically created for every Infosource you need to transfer data.
2. You can make a chain for each data load, so you can call the RFC "RSPC_API_CHAIN_START" to start the chain from external.
the second solution is more simply and available on every release.
Regards,
Sergio -
How to UNLOCK queues when data is migrated from legacy system to SAP syste
Hi All,
I need some help regarding queues (SMQ2). XI is been used to migrate data from legacy system to SAP system. Sometimes the queue is getting locked. Once the queue is unlocked then the message is processed correctly. So, the incoming queues must be "unlocked" routinely so that they can process through the system. There is a standard report RSQIWKEX available that can be scheduled in SAP system to automatically unlock the queues. Before using the standard report RSDIWKEX, we made sure that we have added parameter MONITOR QRFC_RESTART_ALLOWED set to "1" in Integration Engine specific configuration (TCODE SXMB_ADM).We are unable to analyze the reason for locking of queues and how to avoid it. If the locking of the queues can not be avoided, is there any way to unlock the queues? We tried executing this report but were not successful in unlocking the queues. Please guide us in solving this issue. It would be really helpful if you can give us a direction in solving this problem.
Thanks in Advance,
Shwetha.Hi,
Just check if the Queues are registered in Transaction SMQR.
If its not, then register the Queue by pressing 'Register' Button
Sharif. -
Sales order migration from legacy system
Hi,
What are the strategies/precautions/steps to be followed for migrating sales orders or quotations from legacy system to SAP?
ThanksHi,
Sample Code for Sales Order (VA01):
Input File Layout:
Sales Document Type, Sales Organisation, Distribution Channel, Division, Sold To Party, Ship To Party, Customer purchase order number, Customer purchase order date, Payment Terms(custom field), incoterms1, incoterms2, Order reason (reason for the business transaction), Material, Cumulative order quantity in sales units,.
DATA: bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE.
DATA : w_auart(4) TYPE c,
w_vkorg(4) TYPE c,
w_vtweg(2) TYPE c,
w_spart(2) TYPE c,
w_kunnr(10) TYPE c,
w_kunrg(10) TYPE c,
w_bstkd(35) TYPE c,
w_bstdk(10) TYPE c,
w_kwmeng(18) TYPE c,
w_zterm(4) TYPE c,
w_inco1(3) TYPE c,
w_inco2(28) TYPE c,
w_augru(3) TYPE c.
DATA : var1 TYPE string,
var2 TYPE c VALUE '(',
var3 TYPE c VALUE ')',
num(2) TYPE c,
flag(1) TYPE c.
DATA : BEGIN OF it_order, " Internal table Structure
auart(4) TYPE c, " Sales Order Type
vkorg(4) TYPE c, " Sales Organization
vtweg(2) TYPE c, " Distribution Channel
spart(2) TYPE c, " Division
kunnr(10) TYPE c, " Sold-to-Party
kunrg(10) TYPE c, " Ship-to-Party
bstkd(35) TYPE c, " Purchase Order No
bstdk(10) TYPE c, " Purchase Order Date
zterm(4) TYPE c, " Payment Terms
inco1(3) TYPE c, " Inco Terms1
inco2(20) TYPE c, " Inco Terms2
augru(3) TYPE c, " Order Reason
mabnr(18) TYPE c, " Material No
kwmeng(18) TYPE c, " Quantity
END OF it_order,
itab LIKE STANDARD TABLE OF it_order WITH HEADER LINE.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETER filename LIKE rlgrap-filename.
PARAMETER session LIKE apqi-groupid.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR filename.
Get the file path
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_filename = filename
def_path = ' '
mask = ',.,..'
mode = 'O'
title = 'Select File'
IMPORTING
filename = filename
EXCEPTIONS
selection_cancel = 1.
CHECK sy-subrc = 0.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
codepage = ' '
filename = filename
filetype = 'ASC'
headlen = ' '
line_exit = ' '
trunclen = ' '
user_form = ' '
user_prog = ' '
dat_d_format = ' '
IMPORTING
FILELENGTH =
TABLES
data_tab = itab
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM open_group.
LOOP AT itab.
CLEAR : w_auart,w_vkorg,w_vtweg,w_spart,w_kunnr,w_kunrg,
w_bstkd,w_bstdk,w_zterm,w_inco1,w_inco2,w_augru.
w_auart = itab-auart.
w_vkorg = itab-vkorg.
w_vtweg = itab-vtweg.
w_spart = itab-spart.
w_kunnr = itab-kunnr.
w_kunrg = itab-kunrg.
w_bstkd = itab-bstkd.
w_bstdk = itab-bstdk.
w_zterm = itab-zterm.
w_inco1 = itab-inco1.
w_inco2 = itab-inco2.
w_augru = itab-augru.
ON CHANGE OF itab-kunnr OR itab-kunrg OR itab-bstkd .
flag = 0.
num = 1.
PERFORM bdc_dynpro USING 'SAPMV45A' '0101'.
PERFORM bdc_field USING 'BDC_CURSOR'
'VBAK-AUART'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'VBAK-AUART' " Order Type
itab-auart.
PERFORM bdc_field USING 'VBAK-VKORG' " Sales Organization
itab-vkorg.
PERFORM bdc_field USING 'VBAK-VTWEG' " Distribution Channel
itab-vtweg.
PERFORM bdc_field USING 'VBAK-SPART' " Division
itab-spart.
PERFORM bdc_dynpro USING 'SAPMV45A' '4001'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'VBKD-BSTKD' " PO Number
itab-bstkd.
PERFORM bdc_field USING 'VBKD-BSTDK' " PO Date
itab-bstdk.
PERFORM bdc_field USING 'KUAGV-KUNNR' " Sold to Party
itab-kunnr.
PERFORM bdc_field USING 'KUWEV-KUNNR' " Ship to Party
itab-kunrg.
PERFORM bdc_field USING 'VBKD-ZTERM' " Payment Terms
itab-zterm.
PERFORM bdc_field USING 'VBKD-INCO1' " Inco Terms1
itab-inco1.
PERFORM bdc_field USING 'VBKD-INCO2' " Inco Terms2
itab-inco2.
PERFORM bdc_field USING 'VBAK-AUGRU' " Order Reason
itab-augru.
ENDON.
IF flag = 0.
LOOP AT itab WHERE bstkd = itab-bstkd AND kunnr = itab-kunnr .
var1 = 'RV45A-MABNR'.
CONCATENATE var1 var2 num var3 INTO var1.
PERFORM bdc_field USING var1
itab-mabnr.
var1 = 'RV45A-KWMENG'.
CONCATENATE var1 var2 num var3 INTO var1.
PERFORM bdc_field USING var1
itab-kwmeng.
PERFORM bdc_dynpro USING 'SAPMV45A' '4001'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
num = 2.
ENDLOOP.
ELSE.
CONTINUE.
ENDIF.
flag = 1.
PERFORM bdc_dynpro USING 'SAPMV45A' '4001'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=SICH'.
PERFORM bdc_transaction USING 'VA01'.
ENDLOOP.
PERFORM close_group.
WRITE : / 'Session',session, 'was Created'.
FORM open_group.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
client = sy-mandt
group = session
user = sy-uname
keep = 'X'.
ENDFORM.
FORM close_group.
CALL FUNCTION 'BDC_CLOSE_GROUP'.
ENDFORM.
FORM bdc_transaction USING tcode.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
tcode = tcode
TABLES
dynprotab = bdcdata.
ENDFORM.
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM.
FORM bdc_field USING fnam fval.
IF fval <> ' '.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDIF.
ENDFORM.
Regards,
Naveen. -
Grantor Objects Migration from Legacy System
Hi All,
I have a scenario in which I will be requried to migrate Grantor objects (Programs, Application, Claim, Change Request, billing documents) from legacy system.
I checked the busines objects for Application but could not find the Create Method as we have for Sales Order or Activities.
Can we migrate these objects from Legacy System using lsmw or BAPI's?
Thanks in advance.Hi All,
I have a scenario in which I will be requried to migrate Grantor objects (Programs, Application, Claim, Change Request, billing documents) from legacy system.
I checked the busines objects for Application but could not find the Create Method as we have for Sales Order or Activities.
Can we migrate these objects from Legacy System using lsmw or BAPI's?
Thanks in advance. -
Upload master data tables from legacy systems with XI on BW
Hi developers,
Can you help me to reconstruct the steps necessary for upload master data, deriving by legacy tables, on BW system using XI?
Thanks in advanceHi,
see the following link https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/52398597-0601-0010-868a-fd95f8061d85
Rgs
Antonino -
Data Migration from CRM 5.0 to CRM 7.0
Hi Friends,
We are into a re-implementation on CRM 7.0. The old system was on CRM 5.0.
Since this is not an upgrade, the data will not copied over from the old system into the new system.
So, now I would like to know how to migrate data (master/transaction) from CRM 5.0 into 7.0.
I have read that we can make use of BAPI/LSMW/IDOC/XIF adapters to push info into CRM.
But, the customer wants all the historical data to be in the new system.
I think master data can be handled.... but how to migrate the transaction data?.... i mean the number ranges/document flow.. and other relationships.. how can we maintain the same links into the new system?
If it was a migration from legacy system into the SAP CRM, we could have gone ahead with new number ranges etc... but this migration is from SAP to SAP.
Also, we will have ECC6.0 connected to CRM 7.0. ANy additional things to be taken care of when the connection is live in DEV/QA/PROd instances?
Any pointers to this ?Hi Gary,
As per my understanding, your data migration involves quite complex scenarios covering the CRM and ERP box. As the customer needs the old data to be present in the new implementation, the old data needs to be migrated from the CRM 5.0 to CRM 7.0. For the migration to happen, you need to setup the customization (like the number ranges,Condition Data Tables, etc ). Then only you can proceed with the data migration. Also, you need a proper backup plan as this involves proper backup of the data.
Once the setup is complete, you need to configure the ECC6.0 with the CRM7.0 system. Here also, you need to do a lot of settings and performing the Initial loading of the Adapter Objects. But before you proceed with the entire operation, the entire system landscape must be properly defined with appropriate settings.
My recomendation is to take help of SAP Consultants and data migration experts as they are the best persons to guide you on this. Also it would be great if you can go through the SAP Best Practices documents which are best repository documents to guide you on this.
Have a look on this link for an overview of the CRM Data Migration
http://help.sap.com/saphelp_crm60/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm
Hope this helps.
Thanks,
Samantak. -
How to upload the data from legacy system database to SAP data base
Hi.
We are doing analysis of Legacy system and which needs to be converted to SAP system i.e. SAP implementation.
I just want to know , how we migrate the existing whole data( from legacy system) into SAP system.
and which method is the best method to use data migration from legacy to SAP system if data legacy data amount is huge.
Please suggest me.
Thanks.Hi
We can either use the BDC or BAPI or LSMW or Direct Input techiniques for the data transfers.
The combination of both Session and Call transaction can be used to achieve this that includes the error handling also. This invloves the screen interaction.
These days, BAPIs are used to overvome some upgrade problems. For easy upgradation, we cna go for BAPIs. Here ther is no screen intercation.
LSMW mainly used for master data transfers using some standrad programs.
As per your client or company desicions we can choose any of them.
Please refer to these links for more understanding -
BDC Vs LSMW -
BDC VS LSMW
BDC Vs BAPI -
BDC VS LSMW
Thanks & Regards,
Chandralekha. -
Dataload from legacy system to BW Server
Requirements: We have different kind of legacy systems and SAP BW server. We want to load all legacy system data into SAP BW server using BAPI. Before loading we have to validate all data. If there are bad data, data missing we have to let the legacy system user/ operator knows to fix the data into their system with detail explanation. When it is fixed, we have to load the data again.
Load Scenario: We have two options to load data from legacy systems to BW Server.
1. We need to load data directly from legacy system to BW Server using BAPI program.
2. Legacy Systems data would be in workstations or flash drive as .txt (one line separated by comma) or .csv file. Need to load from .txt /.csv file to BW Server using BAPI program.
What we want in the BAPI program code?
It will Read / Retrieve data from text / csv file and will put into the Internal table. Internal table structure would be based on BAPI InfoObject structure.
Call BAPI InfoObject function module BAPI_IOBJ_CREATE to create InfoObject, include all necessary / default components, do the error check, load the data and return the status.
Could some one help me with the sample code please? I am new in ABAP / BAPI coding.
Is there any other better idea to load data from legacy system to BW server? BTW we are using BW 3.10. Is there any better option with BI 7.0 to resolve the issue? I appreciate your help.
Regards,
Maumy answers:
1. this is a scendario for a data push into SAP BW. You can only use SOAP-Based Transfer of Data.
http://help.sap.com/saphelp_nw04/helpdata/en/fd/8012403dbedd5fe10000000a155106/frameset.htm
(here for BW 3.5, but you'll find similar for 7.0)
In this scenario you'll have an RFC dinamically created for every Infosource you need to transfer data.
2. You can make a chain for each data load, so you can call the RFC "RSPC_API_CHAIN_START" to start the chain from external.
the second solution is more simply and available on every release.
Regards,
Sergio -
Datamigration from Legacy Systems to OM
Hi,
Can somebody give me info. about how to migrate from legacy systems to OM. Have anybody a concept. How can i find the datamodel of Order Management.
Send me please the Info. to [email protected]Hi Ravi,
There are couple of tools provided by SAP for Legacy data migration to SAP CRM.
Legacy System Migration Workbench (LSMW),
Master Data Manager (MDM)
ABAP
It depends on your specific requirements that which one of these will suit you depending on the size of the data, number of fields etc.
You may also refer to other relevant thread which might give you more details:-
Data Migration Strategy: Legacy to CRM (BP and Case)
rgrds,
Randhir
Maybe you are looking for
-
Dear Experts, I am trying to execute a query provided in 'How to define and use user-defined fields' doc under How to guides for SBO 8.8 but it is giving me error "incorrect syntax near...." The Sample query i m trying to execute, which is for adding
-
Images not displaying in Images folder
Morning all, RH 802 generating WebHelp. I've got some images in topics that do not appear in the Images folder (where I moved them all to). I think this used to work fine. My images are all there if I generate or if I check the Images folder in Windo
-
Would just like to note that it is very hard to find the right map when all you want is a city. For example, I am hoping that Lyon is in the France map:Center I would really like a way to locate the ma that is going to give me a city I am going to tr
-
Hierarchical query with out using Connect by prior
Hi Guys, I am supporting a product which is enterprise based and only allowd to write queries which are ANSII standard. I have an requirement like If I provide the child I need to know all the parents till highest level. My table structure is like b
-
Is IWebBrowser2 will work in future version of Windows?
I read from many news website that Microsoft is going to discontinue Internet Explorer for future version of Windows (after Windows 10) and will be replaced by Spartan web browser. My question is how IWebBrowser2 behavior in future version of Windows