"Date Modified" info changes even if file is not saved (MS Office 2008)
I recently upgraded from Office for Mac 2004 to the 2008 version (v12.2.4). Since upgrading, I've encountered the following issue that is a huge problem. Me and several people in my office need to access Word .doc files on our network. These files are all organized in folders, and within those folders, the files are organized and sorted by the Modified Date (most recent at the top). Now...if you open an old .doc file for whatever reason and then close it (WITHOUT saving), the Modified Date will change to the current date and time. In Office 2004, the Modified Date remained unchanged until you click Save. This happens with the autosave feature turned on or off, so that is not a factor. The Modified Date changes if you open a file and immediately close it or if you leave it open for several minutes before closing. This is a huge issue for our company, as the organization of our files is becoming more and more distorted as we access these .doc files many times per day. For what it's worth, this does not happen with .xls files, only Word files.
I am not sure if this issue has ever been resolved. I've done some research and have found no solution. This is the only relevant thread I've found for this issue: http://discussions.apple.com/thread.jspa?threadID=1029626
Any suggestions???
Message was edited by: ebelp
Suggest you post your question on Microsoft's forums, as Apple discussions only provide support for Apple produts:
http://www.officeformac.com/productforums
Similar Messages
-
Meta-data changes on video-files 2GB not saved when on NAS
Hi,
the following happes to me since a few days in itunes:
When I try to change e.g. the title-tag of a *.m4v from "Winter 2013" to "Winterholiday 2014" the changed name gets displayed,
but if I call the edit-window (CMD-i) again the old name appears again.
I investigated and found the following, experimenting with 10 files of different size & video-types:
-If the file is stored on the MAC's HD, everything works as expected, no problems.
-If the file ist stored on a NAS, the problems comes up, if the file is larger than 2GB
-If the file is stored on a network-share of an other computer, problem comes up, if file is larger the 2GB
-No difference, if the share comes as AFP or SMB or NFS
I also tried setting up the NAS, no help...the only thing which solved the problem was downgrading to iTunes 10.7...which is not really usefull if one wants to use the iTunes Store
Any hints what I could try further ?
Regards
ChristianHi.
How are the rights configured to be inherited? Could you do a "icacls <folder>" on each level and post it back.
Also worth considering is that this is a Linux Samba system, so it might not work as a regular windows system.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. Even if you are not the author of a thread you can always help others by voting as Helpful. This can
be beneficial to other community members reading the thread.
Oscar Virot -
Detection Method of Date Modified fails due to copied files date modified change
I've been working through an issue for some time now and I think it's a bug with SCCM 2012 SP1. I've built literally 50 deployments in "Application Management" in SCCM 2012, but I've been chasing my tail on a few of them throwing the
"succeeded but couldn't detect" error. The few that have given me problems are all copying text files and then detect the modified date to verify that the file is there. All worked when I initially built them in Windows 8 but are now failing
randomly...even on a machine where they previously worked and I deleted the files to test the deployment again.
What I'm doing:
My java deployment requires policies which we control with the Deployment.config, deployment.properties and java.policy files. A simple script creates the directories and copies the files. I then create a deployment type for this "ConfigFileCopy.cmd"
and create a detection rule for each file that I am moving over. The detection rule looks for a "date modified" date between the beginning and end of the date for the day I modified the file. This allows me to modify the files to change our
java policies and then redeploy them with the "new" modified date as the detection rule, which forces the update.
The problem:
When I first created my deployment, everything worked pretty well. The files copy out and the script runs successfully. There were some minor tweaks I need to make to my scripts, so I did and then updated the content for the deployment type. I believe this
is where things go a little wonky. At this point, my deployment starts failing with the "0x87D00324" error.
Looking through the logs, everything looks good. The reason configuration manager is failing on detecting the modified date for those files, as it turns out, is because the modified dates don't meet the criteria. So that part is properly failing the detection.
The problem is that the modified dates are correct on the server but not the client. Looking in c:\windows\ccmcache, I can see multiple folders....presumably one for each version of the application that I updated. Looking at any of the newer content folders
for this app, the modified dates are the date and time the file was copied out to the workstation, which is incorrect as the file hasn't been modified during that process.
The odd part, is that this doesn't happen EVERY time on EVERY machine. My primary desktop is windows 8.1 and received the files correctly and installed without issue. My test win 8.1 laptop initially received them correctly, but then as I refined the scripts
it began picking up the wrong modified dates and started failing.
I found a similar issue to this existed in SCCM 2007 (http://support.microsoft.com/kb/2276865) so I suspect that this is truly just a bug that hasn't been addressed (or maybe is fixed in R2). Unfortunately
we have business reasons we can't upgrade to R2 at this time so I'm hoping someone has experienced this and has some sort of work around that might get me by for now. If someone can confirm it is fixed in R2, that would help my case to upgrade as well.
I can work around the issue by changing my logic to detect any date greater than a specific date. But I shouldn't have to do that and I'm concerned there are scenarios I haven't thought of that will cause unexpected behavior or failures with that.
This outlines the behavior. It's apparently by design.
"SCCM has a habit of changing the ‘Date Modified’ timestamp of all files it delivers when it detects an ‘upgrade’ of the source files for that application. It typically does not touch the timestamp
of the source files if it delivers a brand new install to a client that has never received the software, however if a single file in the source folder is changed for that application, then SCCM tries to use a previous version of the application in the cache
(C:\windows\ccmcache) and only downloads the new file that has change. This results in all files having their ‘Data Modified’ timestamp changing (except for the brand new file). Therefore determining if that application has delivered
successfully using ‘Date Modified’ timestamps is not recommended. The key to seeing this process in action is looking at the file properties in the
C:\windows\ccmcache\<sccm code> folder for that application, particularly before and after a file is updated in the original source SCCM application folder."
http://blog.kloud.com.au/tag/sccm/ -
Changes to Excel files are not getting updated
File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
Other file, another site but similar situation.
Content changed - form added but next day the change is not reflected. File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
Other file, another site but similar situation.
Content changed - form added but next day the change is not reflected.Hi,
According to your post, my understanding is that changes to Excel files are not getting updated.
I recommend to configure Excel Services data refresh by using Secure Store and an external Office Data Connection (ODC) file.
For more information, you can refe to:
Configure Excel Services data refresh by using external data connections in SharePoint Server 2013
If you use PowerPivot, you can refer to:
Refreshing PowerPivot Data in SharePoint 2013
If you use Office Web Apps, you can use New-SPWOPISuppressionSetting -extension xlsx -action view to refresh data.
You can refer to:
PowerPivot for SharePoint - Browser Refresh Fails (Data Refresh not supported in Office Web Apps)
In addition, here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/office/en-US/2c4009f3-62bc-4af0-9e16-e40e9d418e3b/user-changes-to-sharepoint-documents-lost
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
I have one problem with Data Guard. My archive log files are not applied.
I have one problem with Data Guard. My archive log files are not applied. However I have received all archive log files to my physical Standby db
I have created a Physical Standby database on Oracle 10gR2 (Windows XP professional). Primary database is on another computer.
In Enterprise Manager on Primary database it looks ok. I get the following message Data Guard status Normal
But as I wrote above the archive log files are not applied
After I created the Physical Standby database, I have also done:
1. I connected to the Physical Standby database instance.
CONNECT SYS/SYS@luda AS SYSDBA
2. I started the Oracle instance at the Physical Standby database without mounting the database.
STARTUP NOMOUNT PFILE=C:\oracle\product\10.2.0\db_1\database\initluda.ora
3. I mounted the Physical Standby database:
ALTER DATABASE MOUNT STANDBY DATABASE
4. I started redo apply on Physical Standby database
alter database recover managed standby database disconnect from session
5. I switched the log files on Physical Standby database
alter system switch logfile
6. I verified the redo data was received and archived on Physical Standby database
select sequence#, first_time, next_time from v$archived_log order by sequence#
SEQUENCE# FIRST_TIME NEXT_TIME
3 2006-06-27 2006-06-27
4 2006-06-27 2006-06-27
5 2006-06-27 2006-06-27
6 2006-06-27 2006-06-27
7 2006-06-27 2006-06-27
8 2006-06-27 2006-06-27
7. I verified the archived redo log files were applied on Physical Standby database
select sequence#,applied from v$archived_log;
SEQUENCE# APP
4 NO
3 NO
5 NO
6 NO
7 NO
8 NO
8. on Physical Standby database
select * from v$archive_gap;
No rows
9. on Physical Standby database
SELECT MESSAGE FROM V$DATAGUARD_STATUS;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC1: Becoming the heartbeat ARCH
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery not using Real Time Apply
MRP0: Background Media Recovery terminated with error 1110
MRP0: Background Media Recovery process shutdown
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[1]: Assigned to RFS process 2148
RFS[1]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[2]: Assigned to RFS process 2384
RFS[2]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[3]: Assigned to RFS process 3188
RFS[3]: Identified database type as 'physical standby'
Primary database is in MAXIMUM PERFORMANCE mode
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[4]: Assigned to RFS process 3168
RFS[4]: Identified database type as 'physical standby'
RFS[4]: No standby redo logfiles created
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
10. on Physical Standby database
SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 1 9 13664 2
RFS IDLE 0 0 0 0
10) on Primary database:
select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARCm: Becoming the 'no FAL' ARCH
ARCm: Becoming the 'no SRL' ARCH
ARCd: Becoming the heartbeat ARCH
Error 1034 received logging on to the standby
Error 1034 received logging on to the standby
LGWR: Error 1034 creating archivelog file 'luda'
LNS: Failed to archive log 3 thread 1 sequence 7 (1034)
FAL[server, ARCh]: Error 1034 creating remote archivelog file 'luda'
11)on primary db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00004_0594204176.001 4 NO
Luda 4 NO
Luda 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00005_0594204176.001 5 NO
Luda 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00006_0594204176.001 6 NO
Luda 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00007_0594204176.001 7 NO
Luda 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00008_0594204176.001 8 NO
Luda 8 NO
12) on standby db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00004_0594204176.001 4 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00005_0594204176.001 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00006_0594204176.001 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00007_0594204176.001 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00008_0594204176.001 8 NO
13) my init.ora files
On standby db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\luda\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\luda\bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\luda\luda.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\luda\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_unique_name='luda'
*.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='luda'
*.fal_server='irina'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/luda/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=luda'
*.log_archive_dest_2='SERVICE=irina LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=irina'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/irina/','C:/oracle/product/10.2.0/oradata/luda/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\luda\udump'
On primary db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0/admin/irina/adump'
*.background_dump_dest='C:\oracle\product\10.2.0/admin/irina/bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\irina\control01.ctl','C:\oracle\product\10.2.0\oradata\irina\control02.ctl','C:\oracle\product\10.2.0\oradata\irina\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0/admin/irina/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='irina'
*.fal_server='luda'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/irina/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=irina'
*.log_archive_dest_2='SERVICE=luda LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=luda'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/luda/','C:/oracle/product/10.2.0/oradata/irina/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0/admin/irina/udump'
Please help me!!!!Hi,
After several tries my redo logs are applied now. I think in my case it had to do with the tnsnames.ora. At this moment I have both database in both tnsnames.ora files using the SID and not the SERVICE_NAME.
Now I want to use DGMGRL. Adding a configuration and a stand-by database is working fine, but when I try to enable the configuration DGMGRL gives no feedback and it looks like it is hanging. The log, although says that it succeeded.
In another session 'show configuration' results in the following, confirming that the enable succeeded.
DGMGRL> show configuration
Configuration
Name: avhtest
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
avhtest - Primary database
avhtestls53 - Physical standby database
Current status for "avhtest":
Warning: ORA-16610: command 'ENABLE CONFIGURATION' in progress
It there anybody that experienced the same problem and/or knows the solution to this?
With kind regards,
Martin Schaap -
Data Guard. My archive log files are not applied.
I have one problem with Data Guard. My archive log files are not applied. However I have received all archive log files to my physical Standby db
I have created a Physical Standby database on Oracle 10gR2 (Windows XP professional). Primary database is on another computer.
In Enterprise Manager on Primary database it looks ok. I get the following message Data Guard status Normal
But as I wrote above the archive log files are not applied
After I created the Physical Standby database, I have also done:
1. I connected to the Physical Standby database instance.
CONNECT SYS/SYS@luda AS SYSDBA
2. I started the Oracle instance at the Physical Standby database without mounting the database.
STARTUP NOMOUNT PFILE=C:\oracle\product\10.2.0\db_1\database\initluda.ora
3. I mounted the Physical Standby database:
ALTER DATABASE MOUNT STANDBY DATABASE
4. I started redo apply on Physical Standby database
alter database recover managed standby database disconnect from session
5. I switched the log files on Physical Standby database
alter system switch logfile
6. I verified the redo data was received and archived on Physical Standby database
select sequence#, first_time, next_time from v$archived_log order by sequence#
SEQUENCE# FIRST_TIME NEXT_TIME
3 2006-06-27 2006-06-27
4 2006-06-27 2006-06-27
5 2006-06-27 2006-06-27
6 2006-06-27 2006-06-27
7 2006-06-27 2006-06-27
8 2006-06-27 2006-06-27
7. I verified the archived redo log files were applied on Physical Standby database
select sequence#,applied from v$archived_log;
SEQUENCE# APP
4 NO
3 NO
5 NO
6 NO
7 NO
8 NO
8. on Physical Standby database
select * from v$archive_gap;
No rows
9. on Physical Standby database
SELECT MESSAGE FROM V$DATAGUARD_STATUS;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC1: Becoming the heartbeat ARCH
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery not using Real Time Apply
MRP0: Background Media Recovery terminated with error 1110
MRP0: Background Media Recovery process shutdown
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[1]: Assigned to RFS process 2148
RFS[1]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[2]: Assigned to RFS process 2384
RFS[2]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[3]: Assigned to RFS process 3188
RFS[3]: Identified database type as 'physical standby'
Primary database is in MAXIMUM PERFORMANCE mode
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[4]: Assigned to RFS process 3168
RFS[4]: Identified database type as 'physical standby'
RFS[4]: No standby redo logfiles created
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
10. on Physical Standby database
SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 1 9 13664 2
RFS IDLE 0 0 0 0
10) on Primary database:
select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARCm: Becoming the 'no FAL' ARCH
ARCm: Becoming the 'no SRL' ARCH
ARCd: Becoming the heartbeat ARCH
Error 1034 received logging on to the standby
Error 1034 received logging on to the standby
LGWR: Error 1034 creating archivelog file 'luda'
LNS: Failed to archive log 3 thread 1 sequence 7 (1034)
FAL[server, ARCh]: Error 1034 creating remote archivelog file 'luda'
11)on primary db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00004_0594204176.001 4 NO
Luda 4 NO
Luda 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00005_0594204176.001 5 NO
Luda 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00006_0594204176.001 6 NO
Luda 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00007_0594204176.001 7 NO
Luda 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00008_0594204176.001 8 NO
Luda 8 NO
12) on standby db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00004_0594204176.001 4 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00005_0594204176.001 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00006_0594204176.001 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00007_0594204176.001 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00008_0594204176.001 8 NO
13) my init.ora files
On standby db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\luda\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\luda\bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\luda\luda.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\luda\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_unique_name='luda'
*.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='luda'
*.fal_server='irina'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/luda/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=luda'
*.log_archive_dest_2='SERVICE=irina LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=irina'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/irina/','C:/oracle/product/10.2.0/oradata/luda/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\luda\udump'
On primary db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0/admin/irina/adump'
*.background_dump_dest='C:\oracle\product\10.2.0/admin/irina/bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\irina\control01.ctl','C:\oracle\product\10.2.0\oradata\irina\control02.ctl','C:\oracle\product\10.2.0\oradata\irina\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0/admin/irina/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='irina'
*.fal_server='luda'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/irina/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=irina'
*.log_archive_dest_2='SERVICE=luda LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=luda'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/luda/','C:/oracle/product/10.2.0/oradata/irina/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0/admin/irina/udump'
Please help me!!!!Hi,
After several tries my redo logs are applied now. I think in my case it had to do with the tnsnames.ora. At this moment I have both database in both tnsnames.ora files using the SID and not the SERVICE_NAME.
Now I want to use DGMGRL. Adding a configuration and a stand-by database is working fine, but when I try to enable the configuration DGMGRL gives no feedback and it looks like it is hanging. The log, although says that it succeeded.
In another session 'show configuration' results in the following, confirming that the enable succeeded.
DGMGRL> show configuration
Configuration
Name: avhtest
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
avhtest - Primary database
avhtestls53 - Physical standby database
Current status for "avhtest":
Warning: ORA-16610: command 'ENABLE CONFIGURATION' in progress
It there anybody that experienced the same problem and/or knows the solution to this?
With kind regards,
Martin Schaap -
Preview "this layered Photoshop file was not saved with a composite image" error message?
hi, i get this message:
in preview, when i try to open a .psd file by double-clicking it:
"this layered Photoshop file was not saved with a composite image"
is there any program that will open this file, that came with my new iMac?
OS 10.9.5
thanks!
ps. when i clicked all through help on my Mac, it would not tell me what i needed to know.
So, is this forum the best way to find actual useful info?Thank you Chris,for the correct answer - Best, Bob
-
when I render a video Pre Elements 12 or 13 and save it to work on later. When I bring it back up the rendered file is not saved. I have to render it again. Can it be saved. Pre Ele 1 would save.
[discussion moved to Photoshop Elements forum]
-
When a program is installed, it seems to be able to do it (sometimes inappropriately if it hijacks file associations without asking) so why can't I? This is for 10.4.
Specifically:
1. Since installing an HP wireless printer, HP not only tries to install a bunch of sales-ware on your machine that you have to carefully opt out of (annoying, but not a problem if forewarned), it changes the default file association for a number of basic file types, listing all sort of existing files as HP printer files. Using Get Info to change the default file type association globally causes it to mark ALL the files of that type as newly updated, munging the file metdata (which HP did NOT do). Most of the stuff on our computer is sorted by last modified, so if there is a way to fix this in Terminal (to simply fix or remove the HP default tag) without changing the date the file was modified, it would help. Note that uninstalling the program that created the default would do this, but I obviously can't do that (and reinstalling HP would have the same effect). So there has to be another way, right?
2. Since updating iTunes to v.9 a while back, every mp3 is marked as an iTunes file even though iTunes has NO multiple library capability without a wonky reboot using the option key, meaning that if I click on an mp3 downloaded since last update of iTunes, it opens automatically in iTunes and gets added to the SOLE itunes library without asking. (There is no way to toggle between multiple libraries or archive media in separate folders; iPhoto has a similar problem. (Has this been fixed in the latest version of iTunes?) In comparison, Quicktime starts up immediately and does not attempt to create a playlist just because you opened a file and listened to it.
(The iTunes playlists are simply subfolders of the single main library -- and you can't create a new library without doing a wonky procedure by clicking option during startup and telling iTunes to forget where its library is located (includin everything in it) and look up an entirely separate one by hand. So any mp3 file downloaded recently is uploaded to iTunes if you click on it. This wouldn't be problem if it didn't automatically add it to the sole iTunes library just because you clicked on it.)
Besides, all my old mp3s are Quicktime files and they are all archived by date modified. To its credit, ITunes, unlike HP, does NOT hijack older files already on disk and remark them as iTunes files. It only marks newly downloaded files as such. But if I try and change file association for FUTURE mp3 files using Get Info > "use this program for all files of this type", it munges the file metadata (date modified) for all existing files!
Note that in HP case, it apparently does it at the file exchange preference level (or whatever it's called) since the OS then recognizes every file of those types as an HP file. In the iTunes case, it only does it if you download a new media file or open an existing file in iTunes, but again without changing the date it was last edited.
Since these programs are able to change the default file association without changing the date the file was last edited, it should be reversible in Terminal, correct? Why does it change "date modified" when you try and correct metadata using Get Info (or sometimes just by clicking an enclosing folder?) Date modified should be a record of when a file itself was edited, not when it was renamed, or other metadata. Otherwise stuff can't be sorted correctly.The unix commands you need are:
GetFileInfo
SetFileInfo
and maybe find
for cryptic details use the man command
Macintosh-HD -> Applications -> Utilities -> Terminal
man SetFileInfo
You may use the SetFileInfo command to set the file type & the program which will open the file.
# This little gem will do a get info on all files in a directory.
mac $ ls | xargs -I {} GetFileInfo "{}"
file: "/Users/mac/playdoc/oddadocodd"
type: ""
creator: ""
attributes: avbstclinmedz
created: 05/01/2011 14:53:22
modified: 05/01/2011 14:53:22
file: "/Users/mac/playdoc/one.docx"
type: ""
creator: ""
attributes: avbstclinmedz
created: 05/01/2011 13:57:48
modified: 05/01/2011 13:57:48
file: "/Users/mac/playdoc/oneLineFile"
type: "TEXT"
creator: "!Rch"
attributes: avbstclinmedz
created: 05/07/2011 14:27:17
modified: 05/07/2011 14:27:17
file: "/Users/mac/playdoc/oneLineFile.txt"
type: "TEXT"
creator: "!Rch"
attributes: avbstclinmedz
created: 05/07/2011 14:27:49
modified: 05/07/2011 14:27:49
file: "/Users/mac/playdoc/three.docx"
type: ""
creator: ""
attributes: avbstclinmedz
created: 05/01/2011 13:58:03
modified: 05/01/2011 13:58:03
file: "/Users/mac/playdoc/two.docx"
type: ""
creator: ""
attributes: avbstclinmedz
created: 05/01/2011 13:57:56
modified: 05/01/2011 13:57:56
file: "/Users/mac/playdoc/weirder.doc.docx"
type: ""
creator: ""
attributes: avbstclinmedz
created: 05/01/2011 14:50:03
modified: 05/01/2011 14:50:03
# well, ! is a funnie character so we escape it.
mac $ SetFile -t TEXT -c \!Rch two.docx
mac $ GetFileInfo two.docx
file: "/Users/mac/playdoc/two.docx"
type: "TEXT"
creator: "!Rch"
attributes: avbstclinmedz
created: 05/01/2011 13:57:56
modified: 05/01/2011 13:57:56
mac $
mac $ date
Sat May 7 14:40:56 EDT 2011
mac $ -
Date modified is incorrect on exisiting files?
Hello all - We have a NW 6.5 SP8 server with Win7 and XP clients. All clients though report the existing shared files date modified attribute incorrectly (31/12/1984). This applies to all files - folders seem to be ok. Create a new file and it's fine. Copy and paste an existing file and the modifed date will remain the same (1984) but the created date will be the current time and date.
I've had a good search and the small mentions of it point to it being possibly an AV or backup issue? There's no AV on the NW server (not ideal I know but it is on all the Windows servers) and I don't "think" it's anything to do with backup either (but I will check/investigate further)
Has anyone any ideas please?
Many thanksOriginally Posted by HvdHeuvel
On Tue, 14 Aug 2012 22:46:02 +0000, ataubman wrote:
> Always an AV or backup issue, in my experience. Is there AV on the
> clients?
>
> Also: has this always happened, or only since what change or update?
The OP most likely have Windows XP Clients with A/V software installed
(Sophos ?)
After scanning mapped network drives from the Workstation, the dates of
the files on the network drives have been reset to 1985.
This problem has been introduced with an update to the A/V software that
has invalidated the check that was in place for this in the Novell client.
We have now made another update to the client, which can be downloaded
from here [1] :
Few customers have already confirmed this to be the solution to the same
problem
Regards
Hans
[1] NOVELL: Downloads - Novell Client 4.91 Post-SP5 (IR1) NWFS.SYS 3
Thanks for this Hans, much appreciated.
Yes - well guessed, Sophos on the clients. Mostly clients are Win7 though - is there a recommeded client for Win7 that has been customised to avoid this issue?
If I install the client you posted on the XP machines will it rectify this issue, as in will the dates be reset with the correct data - or is that modified tag info missing for ever?
Thank you so much for taking the time to help!
Echo -
Changes made to files are not reflecting
File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
Other file, another site but similar situation.
Content changed - form added but next day the change is not reflected.
SharePoint 2013
Please help.
Thanks
PjHI Alex,
Answers to your questions inline below:
So you are editing a file, modifying the content in there and saving it but the changes are being lost?
Ans: Yes.
1. Have you checked the file immediately after closing it to see if the changes lasted?
Ans: I am not sure, if I checked the files immediately after. I think the changes were saved properly because I didn't get any error.
I managed to print out a file with a new element on one day but on the next day in the same file, I saw that element was not there.
I sometimes open the files through the Newsfeed tab, does that matter? My understanding is that the system is going to the original location to open the file
2. Do the changes then disappear later that day at some point?
Ans: That is my understanding.
3. Does this happen just for those files?
Ans: So far I have observed it for two of the files only.
4. Do you have versioning or publishing enabled on those lists? Versioning will let you see who changed it when and approval or publishing might be hiding things?
Ans: Versioning is enabled, publishing - not.
When I go to check versions to see, if maybe someone overwritten my change and retrieve the previous version, there is no previous version with the changes i made
the previous day.
Thanks. -
I have imported a PDF document and it automatically saves it to the cloud. I want the imported form to save locally? Is there a way to change an imported document from cloud to local?
Hi urs.boeschenstein,
Files are automatically saved to your online account when you use the Acrobat.com online services. However, you can most certainly download the files to your computer, by selecting them at https://cloud.acrobat.com/files, and then clicking the Download icon.
Are you having additional issues with your subscription?
Best,
Sara -
How do i change the webpage file format when saving a webpage?
whenever i try to save a webpage it automatically does so using a chrome html format. windows does not recognize this format. how do i change it? thanks
I'm not sure what you mean by a "chrome html format."
I save pages all the time with Firefox 3.6.16 (and now 3.6.17) and have no problems.
When you select Save Page As, it opens a dialog window so that you can indicate where the page is to be saved.
In the Save as Type dropdown list are format options - "Web page, Complete", "Web Page, HTML only", and "text files"
If you select Web Page, Complete, Firefox saves the HTML file and creates a folder where it stores all the other files associated with the page. If you then open the HTML file, it should display properly in Firefox (or any other browser).,
If you select Web Page, HTML only, Firefox saves only the HTML file, no other files are saved.
If you select text files, Firefox saves only the text, it does not save any of the HTML. Basically, you get what you can see on the page without any of the formatting.
I've never seen an option, in Firefox 3, to save a file as a "chrome html format."
I've only see what I described above.
One other thing, I suggest you upgrade to Firefox 3.6.17. At 3.6.10 you are quite a way back and have missed some security updates.
I don't think you can use the update link under the Help menu, you may have to go to the Firefox site and download it manually. It would not hurt to look for some instructions as to how to go from 3.6.10 to 3.6.17.
Stan -
Hello everyone
I used
String realPath =config.getServletContext().getRealPath("/");
to get the real path of my application.
I got the string as: /home/cascanicacom/public_html/
Now I need to create a file "write.txt" and save it under the /home/cascanicacom/public_html/ on my web server
Now please tell me where should I make the changes in the
File file = new File("write.txt"); so as to create it in the server.
I even tried:
File file = new File(realPath +"write.txt");
And when I checked in the server theres no file there.
Please!
Please advice me.BalusC wrote:
Only invoking new File() indeed doesn't create the physical file. You have to open the stream on the file first.Thank you Sir for the reply,
How can I open the file if the file doesn't exist on the web server. My job is to create the file through codding. Even if the file exist in the web server it will overwrite it completely.
>
Anyway, didn't you see any useful exceptions or traces after doing so? Till now, there's no exception.
I tried using the
File file = new File(rootPath+"write.txt") //rootPath= getRealPath("/")
Are you looking in the right file location? No, I am just trying to create a file in the web server under the /home/cascanicacom/public_html/
Do you have the sufficient rights to write and view files? As its going to overwrite the file after every execution, so, once I create a file manually on the server and checked all the attributes of the file like read, write, etc. That was just for checking whether the reason was for the permission or not. But still the file didn't overwrite it. So that means the file just couldn't find the server path.
Do you understand how UNIX file systems work?No, I don't have much idea at all.
Please help me out BalusC -
Please pardon the post of this redundant - I searched and couldn't find anything that helped...
I'm using Lightroom 2.6 on Windows Vista. I've toggled the xmp switch so that XMP files should be saved.
I make changes to metadata - primarily keywords, location, captions, etc., and when I go to the folder where the images are stored, there are no xmp files. I did a hard drive search for *.xmp and found old files from a LRv1 catalog, but not for those files I just edited.
Other than the Edit Catalog Settings Metadata switch, is there some other place these files could be written to?
Thanks in advance.
ClaytonFor raw camera files LR will create .xmp files and for the others, dng, jpeg, tiff the data is stored within the actual file.
Maybe you are looking for
-
Installation Problem of Oracle9i AS on Windows 2000
Hi All, I installed Oracle9i database, Oracle9i Developer Suite on my machine having W2k. After that I tried to install Oracle 9iAS. But auto installer is not starting after inserting CD. Then after I execute setup.txt but it is giving error after as
-
Pls help me error in creating DATABASE in ORACLE 8I
I used Redhat 6.1 and installed Oracle 8.1.5.2 I think the oracle software is installed successfully. However, when I attempted to create the database by Database Configuration Assistant, I got an error message when I click on 'start' button. privile
-
i changed the lan uage of my iphone 3gs from english to spanish and then back to english. now it does not recognise enghlish but seems to be using a mix of languages. how do i get it back to english please?
-
Hello, Just wondering if there is a way to reinstall Mail.app? To cut a long story short, Mail went bonkers after a power cut and no fixes have worked - so I"m thinking maybe take it off completely and start again! Thanks, Sarah
-
DB adapter throws error while inserting ORABPEL-11616
Hi, I am using SOA suite 10.1.3.5. I have configured the BPEL DB adapter to insert into table AP_INVOICES_INTERFACE and i am getting the following error. I tried inserting record manually to the table and it is getting inserted. Any help in this rega