Date not coming in proper format after applying formula in Update Rules

Hi All,
I have two time characteristics "Goods Issue date" and "Goods Return date" and One key figure "No. of days elapsed".
The key figure "number of days elapsed" is being calculated by taking difference of "goods issue date" from "goods return date", but the format for that is not coming proper for example:-
Goods Issue Date is 21.06.2006
Goods Return Date is 22.08.2006
According to formula No. of days elapsed shud be 62
but it is coming as 04.03.0001.
Please help as it is a urgent requirement.
Much Appreciated,
Sunil Morwal.

Dear Sunil,
Kindly check if creating 2 new KeyFigures (DATE) will be of help by assigning the said "two time characteristics" values.
From these 2 new KYFs, apply your formula..
Hope this helps..
Thanks.
Message was edited by: Arnold Padiernos

Similar Messages

Data not coming in proper tabular format - BICS

Hi friends,
I tried connecting Xcelsius with BW(BEX query) where I succeeded to connect both system and was able to see objects coming through BEX query into Xcelsius connection defination TAB. When I go to its output values, it contains "cross-tab Data". I clicked on it and map it in excel. My BEX query has only two things one is Material (Char) and other is Amount(Key Figure). So I mapped it with two colums of excel of Xelsius and finally mapped those two colums with Spreadsheet component of Xcelsius to view the things precisely as it is coming.
But the problem is when I see the output, though it is showing the data but the header of the spreadsheet is bit scattered.As in,
it should display like:
Material.....|...Amount..|
Mat1..........| 5000........|
Mat2..........| 2000........|
But it is showing something like
Key Figures...|...Amount....|
Material.........................|...........................
Mat1..............................| 5000........|
Mat2..............................| 2000........|
Overall Result...............|..7000.......|
You can see the second table contains data which is really different from the format I am looking for. What could be the reason for this? Anybody can guide me..
Thanks alot!!

Hi kgaurav2k1, if you don´t want to see the "Overall Result" you need to change the query definition to not show total (from Bex Query Designer). Regarding the header, I´ve never could change it, and decided to use the data from the 3rd row. It is the format for a cross-tab header.
Hope I help.
Regards,
Liliana

SLED date not coming automatically

hi,
As per my client requirement they will enter the production date only in goods receipt and SLED date have to come automatically at GR time. I already maintain the Total shelf life and minimum remaining shelf life in material master.i activated SLED for plant and movement type but SLED date not coming automatically.
If i l enter SLED date more than my Total shelf life period , then system automatically updating the total shelf life period in batch master record. how to avoid this issue? i want whatever shelf life entered in GR should have to recorded not system calculated based on master data(Total-shelf life)
Thanks
Muthuraman.D

Dear all,
i am using internal batch numbers at the time of goods receipt provide me some solution for above issue?.....
Thanks
Muthuraman.D
Edited by: muthuraman d on Nov 7, 2011 12:18 AM

Systems preferences do not respond....after most recent Security Update...

HELP.........systems preferences do not respond....after most recent Security Update...During the most recent Security update download, near the end of the process,clean turned all graining and seemed to freeze. I waited awhile and then turned the computer.
ever since then I can not open up any of my systems preferences, battery level,date and time do not show up on the top of the screen as before.....
I had since gone and successfully downloaded the most recent security update for the Apple site and after a restart still no battery level, systems preferences or date and time....
Any suggestions at this point.
BB
ibook g4 Mac OS X (10.3.9)

Hi, I think I need to update my profile because my computer definitely says it has 10.4.11
I managed to solve the stickies and TextEdit issues by removing Butler in the end.

Data not coming from DOE to Mobile After defining Rule for device attribute

Hi All,
I have created a DO and rule for it.In case of Bulk Rule for all definition when i triggere extract from Portal then all the data comes to outbound queue but when i define rule for Device attribute then no data comes to my Outboun queue.Here is the scenario what i am doing :
1. I have order header in my backend which has a field named "Work_Center" and this will be criteria field.
2. In CDS table i have all the records for all the work center.
3. Now in RMM under customized , i have added an attribute named "Work_center".
4. Now i defined a rule with Device attribute mapping and activated the rule.
5. Now on Portal i assigned this data object and in the device attribute tab i assigned the value(this value exist in CDS table for few orders) of a Work center to the attribute "Work_Center" .
6. Then i triggrere extract but its Outbound queue is empty, what could be the reason.
Is my approach is correct
Regards,
Abhishek

Hi Abhishek,
You can check one ore thing, after you have performed all the steps till step 5, i.e. just before triggering
extract. Check if the AT table for ur DO has entries based on the criteria specified by you...
1. In the workbench click on the Data Object, and then right click and select "View Metadata".
2. Select Distribution Model tab.
3. Now select your DO's Association table.
4. For the input field DEVICE ID specify your corresponing device id,and also for status field specify it
as "I" and execute
If there are any entries now in the AT table, and on triggering extract if they are not coming to the
outbound Q there is some EXTRACT Q blocked. And is there were no entries in the AT then the rule
specified is not the satifying.
Thanks,
Swarna
Now if you have entries w

Data Not coming From DSO to Cube

Hi All,
I have data in DSO. When i run the DTP , request status is green.
Now when i go to cube and see the data the request has came but data has not transferred .....
The Request Status is green in cube but data is not cuming....
No transferred data.
How can bring data in cube..??
Regards,
Rohit

Hi,
When you loaded the DSO......after that are you loading the cube for the first time?If so .....and still data is not coming..then check if the last loaded request somehow got deleted from the DSO....
If after loading the DSO....you have already loaded the cube...and this is the second time you are loading the cube.........then obviously it will pick 0 records...........since delta DTP always picks the fresh new request..........if there is no new request in the source .......then it will pick 0 records.......
Also both the cased are not working.........then check the End routine or Start routine.if any.......
Thanks and Regards,
Debjani.......

Data not coming in cube...

Hi,
I have loaded data in ODS but when loading the data from this ODS to cube it is not fetching any data in the cube. I have created the DTP to transfer data from ODS. but no data is coming in cube.
Any mistake I have to correct? or any setting I have to check?
Please let me know.
Thanks,
Jeetu

Hi Ravi,
I presed execute button from DTP in schedule tab.
It is showing DTP as green , no error is there.
But no records are loaded from ODS through DTP.
Thanks,
jeetu

Data not coming to BW from SAP system from last 7 days....please help

Hi Experts,
I am monitoring the process chain from last 7-8 days but no data is coming to BW from SAP R/3 . then i checked in SAP R/3 system in RSA7 there weree no queues it was empty. then i checked LBWQ and some MCEX03,MCEX11,MCEX13,MCEX04 were there and i double clicked on one of them then i saw the status in queue as NOSEND . we have used QUEUED DELTA as update mode in LBWE. now i want to bring data for last 7-8 days in BW system. please can anyone provide me the detail steps for this as it is our PRODUCTION system. please provide the steps...!!!!

Hi,
Go to SM37 in your R/3 environment and check if there are any jobs starting with LIS* in released status. This is the job which would push the entries from LBWQ to RSA7 for specific applications. If there are no jobs, this is the reason for your problem.
If you do find any job there, then double click on them to check their frequency. Generally it should be hourly.
If there is no such job, then go to LBWE. For each of your applications, click on Job Control and maintain the job scheduling. In the start date, maintain it as periodic job. Then simply schedule teh jobs. Once the jobs are scheduled, after every run of them, LBWQ would get cleared.
Then it would get picked from RSA7 by the BI job.
Edited by: Rahul K Rai on Dec 8, 2010 4:00 PM

I have a used i phone sync it up i get every thing contacts pitchers but the apps will not load or stay on after applying

i have a used i phone 3g when i sync it up i get my old contacts and pitchers old text and phone calls but the apps will not stay after applying can someone help me

What version of iOS is the device running?
Is the issue with specific apps or all apps?
What version of iOS do the apps require? Some, possibly all, may require a newer version of iOS than the device is capable of running.

Unable to send or receive text messages after apply s/w update on Q10

After apply software release 10.1.0.4181 (size 6mb) on my Q10, I can no longer send or receive text messages, pls help. At first I thought the text messages were only collapsed, but I am unable to send, receive or open any previous chat. I have rebooted the device multiple times, including removing the battery. When trying to do a text message, system seems stuck on the last message received yesterday, and am unable to open this chat session, reply, compose. I cannot compose for any contact, nor able to receive any text messages. PLs help !!
Solved!
Go to Solution.

I removed my battery again, this time left out for 5 minutes. SMS is now working again. (previously approx 2 min)
However, the problem I was experincing, I have had before, where I cannot send an sms message. I believe I may have hit a hot key and basically does not allow you to send a message. Typically I reboot at this point and sms works again. I will try your new os option after I verify all is working properly again. Thank you for your help.

Problems after applying latest Airport update.

I have a core duo macbook and was able to maintain a connection to my wpa secured wireless network before running software update a few days ago. After doing so, I can't maintain a connection. It simply stops working.
I disconnect, reconnect, and os x says there was a problem connecting to my network. I turn airport off then back on and still get the same error.
I am still able to sign onto other networks. My ibook and powerbook have no trouble connecting and maintaining a connection to my wpa secured network when my mac book is having trouble. I have not applied any software updates to those recently.
After rebooting the macbook, I can connect just fine. This happens once every 3 hours or so and is driving me nuts. Anyone know how to rollback the update or know what might be wrong?
Thanks,
Todd
MacBook 2.0ghz Core Duo (Black) Mac OS X (10.4.8)

hello,
i have the same problem after the update. i see some members on the forums suggesting to turn off the wifi security helps, but who wants to give free wifi to there neighbors. with my situation, my router has a settings for "WPA-AES" or "WPA-TKIP." i had my router set for "WPA-AES" before the update, things works fine, after the update i tried to delete the key chain entries of my wifi connection and the preferred network list, which didn't help, but changing my router to be "WPA-TKIP" helped. my connection works normally again, i can reboot, put the macbook to sleep and it reconnects fine.
hope this might work for you if you have this "TKIP" setting for you wifi router. i have a buffalo WZR-RS-G54 router, btw.
good luck.
dang
macbook 2.0ghz, 2g ram, 80g hd Mac OS X (10.4.8)

Unsupported Image Format after recent Digital Raw Update..?

I think there is a serious bug in the most recent digital camera raw update.. Though I am not sure if it's a 10.5.6 update issue or the recent camera raw update (v2.4)... The problem is didn't launch aperture between these so I don't know..
I have a Leica V-Lux 1 camera. The RAW format for this camera has been supported since leopard came out. However, in a effort to save space I always convert my leica raw files to DNG. This hasn't been a problem for me and things have worked fine... However, after this update I am receiving the dreaded unsupported image format.. What is interesting however, is that this is only for my DNG converted RAW files in aperture.. Those files which I didn't convert to DNG and remain in raw (i have a few) don't have this message. This is serious, I have lost access to my entire collection of pictures as a result..

The solution to fix this was to restore the 2.3 camera update (RawCamera.bundle) file using time machine. I will have to report this to apple bug reporter as this is a clear problem with 2.4 update and easily reproducible.

Firefox 4 does not work on my G5. After prompting me to update from previous version I am now left with nothing functioning. How do I go back?

After downloading the latest update Firefox kindly told me I should upgrade to V4. So I did. I downloaded it, dropped it into my applications folder and overwrote the old version. Only to be told when attempting to start the application "Firefox does not work with this architecture".
Brilliant. So I look for an older version on the site, and there is nothing to be found. Just the insistance that I should download version 4 for my Mac. Well, "IT DOESN"T WORK GUYS!"
Now can we have a fix please quickly or a link to the older version, as I am now left without all my bookmarks or passwords and you are about to effectively isolate a section of the computing community from ever using you again.

For your toolbars that you had installed before, are they simply incompatible with the latest version of Firefox?
Please try reading [[Add-ons are disabled after updating Firefox|Add-ons are disabled after updating Firefox]], as that may help with your addons.
As for Firefox running slow, is it slow lading web pages, or is just the whole browser slow? Try reading [[Firefox is slow|Firefox is slow]] , which may have some tips (the optimize Windows part especially).

Formula variable not displayed in proper format

Hai,
I used a keyfigure formula variable, that gets current date, in a query (In columns, key figure structure to calculate no. of days). The no. of days are calculated peoperly and everything is just perfect.
But after executing the query, when I display text element=> variables, the system is displaying the variable as 20,060,803 as opposed to date format like 8/3/2006.
Question: Is it how the date formula variable is displayed or there is a system error?
I remember seeing it in date format.
Can somebody comment on this or suggest a solution.
I couldn't find notes on this too!

In the restricted key figure formula definition, use the Data function "Process Value as Date DATE" and enclose your restricted key figure calculation inside the date parenthesis.
I have another related problem. I am trying to use dates to calculate 30 days before a (date formula variable), 60 days after, etc. Some of the dates are calculating correctly, but some are just returning an X. All appear to be extracting with the same format.
Anyone have a similar problem?

Report designer issue:data not coming

Hi Folks,
I have an issue with bex report designer.
The thing is i have created a query in query designer and that is my data provider for report designer.
I am applying some formatting rules and executing it.
The problem is i am not geting any records except the fields.
Could anyone help in this regard.
Regards

HI,
There are different sections in a Report Designer. G0Header, G1 Header, Det, G1Footer, G0Footer
G0 Header: Contains only the labels of the feilds that is displayed on the top of every page.
G1 Header: is a level 1 header which is displayed Beneth the Group0 Header
Detail: will display the values of Query Elements(Key/Text) placed in this section.
G1 Footer: Will be displayed once for each G1 Header that is displayed. This Can have the totals.
G0 Header: Will be displayed at the end of the page. The footer can have page nuber or totals.
For Example:
To design a simple report having Distribution Channel and Sales Amount. The report can be designed as
G0 Header: [Distribution Channel].Key [Distribution Channel].Text [Sales Amount]
Detail: [Distribution Channel].Key [Distribution Channel].Text [Sales Amount].Val
G0 Header: [Result] [Sales Amount].Sum
Thanks,
Saranya

Date not coming in proper format after applying formula in Update Rules

Similar Messages

Maybe you are looking for