Date of activation?
Hello!
I'm thinking about buying used iPhone 3G. So, while choosing a phone I want to know, for how long iPhone was in use. The easiest way to get this information is get to know the date of activation. How can I get this information? Will Apple answer on my request? Or this information is closed? If closed, how can I get to know for how long was iPhone in use?
Thanx!
Is this the only way..? It's a pity
Well, the date of purchase and date of the beginning of using is not the same
Anyway, thanx! I hope the seller just won't lie me
Similar Messages
-
DSO upload and no data in Active data table
Hi Experts,
I have a strange problem.I have loaded data to DSO from DS in BI7. It has the further uplaod to cube.I have activated the DSO and it went sucessfull and had Request ID generated. It has added and transfer records available like 150000 records as I have done full upload. strangly I cannot see any data in Active data table.
Pls advise how can I check the data I am doing some mistake.I have data mart status for this DSO. the deletion of the DSO and reloading could that create the data not visible in DSO even after activation
Pls advise.
TatiHi,
I believe this got something to do with the display setting.. After displaying the data, get into the settings menu and look for Layout option --> display --> see if there is any default setting applied.. change this setting to something else.. create a setting with all the columns dragged & dropped.. These are the options you can try..
If this did not resolve.. please try displaying the data from SE16 transaction and post us the results..
Thanks,
Naren -
Buffer busy waits on UNDO data in Active Dataguard
Oracle Version: 11.1.0.7.0
Active Dataguard
Statspack has been configured for Active Dataguard on Primary database.
We got an spike of Buffer busy waits for about 5 min in Active Dataguard, this was causing worse Application SQL's response time during this 5 min window.
Below is what i got from statspack report for one hour
Snapshot Snap Id Snap Time Sessions Curs/Sess Comment
~~~~~~~~ ---------- ------------------ -------- --------- -------------------
Begin Snap: 18611 21-Feb-13 22:00:02 236 2.2
End Snap: 18613 21-Feb-13 23:00:02 237 2.1
Elapsed: 60.00 (mins)
Top 5 Timed Events Avg %Total
~~~~~~~~~~~~~~~~~~ wait Call
Event Waits Time (s) (ms) Time
buffer busy waits 2,359 2,133 904 76.2
reliable message 7,210 179 25 6.4
parallel recovery control message reply 8,831 109 12 3.9
CPU time 100 3.6
latch free 13 85 6574 3.1
Host CPU (CPUs: 16)
~~~~~~~~ Load Average
Begin End User System Idle WIO WCPU
1.07 0.82 0.68 0.39 98.88 0.00Since this is 11g version I was able to drill down on the segment on which buffer busy waits were occurring by using v$active_session_history on Active Dataguard.
SQL> select count(*),p1,p2 from v$active_session_history where event='buffer busy waits' and sample_time between to_date('21-FEB-2013 21:55:00','DD-MON-YYYY HH24:MI:SS') and to_date('21-FEB-2013 22:09:00','DD-MON-YYYY HH24:MI:SS') group by p1,p2
COUNT(*) P1 P2
2136 3 99405
17 3 7293
SQL> select owner,segment_name,segment_type from dba_extents where file_id = 3 and 99405 between block_id AND block_id + blocks - 1
OWNER SEGMENT_NAME SEGMENT_TYPE
SYS _SYSSMU14_1303827994$ TYPE2 UNDO
SQL> select owner,segment_name,segment_type from dba_extents where file_id = 3 and 7293 between block_id AND block_id + blocks - 1;
OWNER SEGMENT_NAME SEGMENT_TYPE
SYS _SYSSMU11_1303827994$ TYPE2 UNDOThought to check the SQL_ID which were waiting on this buffer busy waits.
SQL> select count(*),sql_id,session_state from v$active_session_history where event='buffer busy waits' and sample_time between to_date('21-FEB-2013 21:55:00','DD-MON-YYYY HH24:MI:SS') and to_date('21-FEB-2013 22:09:00','DD-MON-YYYY HH24:MI:SS') group by sql_id,session_state order by 1;
COUNT(*) SQL_ID SESSION_STATE
1 cvypjyh0mm56x WAITING
1 02dtz82as4y42 WAITING
1 80gz2r4hx1wrj WAITING
2 6tfk1t4mwt7hu WAITING
9 0q63qhsbqmpf0 WAITING
12 0jgnx96ur0bmb WAITING
12 7pguapqcc6372 WAITING
14 4t6hqk5r2zbqs WAITING
18 1qwt0qkd59xj3 WAITING
23 5phgg8btvhh6p WAITING
23 banp2v6yttym7 WAITING
30 a1kdmb1x084yh WAITING
30 8hxuagk22f8jz WAITING
30 9r0nysyp360hn WAITING
31 cackx62yu477k WAITING
32 40zxqg1qrdvuh WAITING
32 0jqrd56ds1rbm WAITING
32 7009zmuhvac54 WAITING
38 1jb37ryn1c871 WAITING
60 aum74caa623rs WAITING
63 cr8mv0wawhak9 WAITING
63 3xgk3vsh3nm08 WAITING
86 3k9cq3jv0c3rg WAITING
95 0sy9vjuutgwqu WAITING
122 bhn2kk76wpg12 WAITING
134 4pkfqgyt7rh34 WAITING
139 1sbzsw7y88c7t WAITING
146 92y0ha2nqd6zj WAITING
163 djjqcp1sg2twb WAITING
173 arxq6au12zazw WAITING
256 fa0gzxmgyyxj2 WAITING
282 2f17qywcgu751 WAITINGSo top 10 sql_id's were on tables TAB1 and TAB2 under schemas SCHEMA1 to SCHEMA8.
Checked DML's occurred on Primary using dba_tab_modifications view since last stats job ran on these was about 10 hours ago from when the issue occurred on Active Dataguard.
SQL> select TABLE_OWNER,TABLE_NAME,INSERTS,UPDATES,DELETES from dba_tab_modifications where TABLE_NAME='TAB1' order by 3;
TABLE_OWNER TABLE_NAME INSERTS UPDATES DELETES
SCHEMA1 TAB1 4448 0 3728
SCHEMA2 TAB1 4547 0 4022
SCHEMA3 TAB1 4612 0 4152
SCHEMA4 TAB1 4628 0 3940
SCHEMA5 TAB1 4719 0 4258
SCHEMA6 TAB1 4809 0 4292
SCHEMA7 TAB1 4853 0 4356
SCHEMA8 TAB1 5049 0 4536
SQL> select TABLE_OWNER,TABLE_NAME,INSERTS,UPDATES,DELETES from dba_tab_modifications where TABLE_NAME='TAB2' order by 3;
TABLE_OWNER TABLE_NAME INSERTS UPDATES DELETES
SCHEMA1 TAB2 25546 0 26360
SCHEMA2 TAB2 26728 0 27565
SCHEMA3 TAB2 27403 0 27763
SCHEMA4 TAB2 27500 0 28149
SCHEMA5 TAB2 28408 0 30440
SCHEMA6 TAB2 30453 0 31906
SCHEMA7 TAB2 31469 0 31988
SCHEMA8 TAB2 32875 0 34670 But confused about Why there could sudden spike of demand on UNDO data in Active Data Guard ? Could any one please shed some lights on finding the reason for this issue ?But confused about Why there could sudden spike of demand on UNDO data in Active Data Guard ? Could any one please shed some lights on finding the reason for this issue ?It's been interesting, The job runs only on ADG?
Even it is only reporting purposes, Which runs only select statements. Are you sure that issue is only because of this job?
Moreover am interested to know, How you able to monitor at the same time? Using EM?
What all are the jobs ran on primary at the same time?
Then, is it possible to run the job on primary and see whats the response?
I suggest you to run the same job again on standby and see the ET of the job and also gather the statspack to check whether you got same buffer busy waits or not.
What storage you are using for primary and standby? In terms of I/O and performance all are same?
You got chance to take statspack even on primary database?
What are the parameters differ in primary and standby?
Also check this note, Heresome work around provided.
*Resolving Intense and "Random" Buffer Busy Wait Performance Problems [ID 155971.1]* -
How to save HR data in Active Directory using ABAP i.e thru LDAP Connector
Hi All,
Can any one please help me out how
to save HR data in Active directory
using LDAP Connector ?
Please help ASAP as it is very urgent .
Thanks
JitendraThere are 100 of such scripts are there online.
here are few tips and codes. you will get more.
https://gallery.technet.microsoft.com/scriptcenter/Feeding-data-to-Active-0227d15c
http://blogs.technet.com/b/heyscriptingguy/archive/2012/10/31/use-powershell-to-modify-existing-user-accounts-in-active-directory.aspx
http://powershell.org/wp/forums/topic/ad-import-csv-update-attributes-script/
Please mark this as answer if it helps -
How to save hr data in Active directory using abap
Hi all
can any one please help me out how to save hr data in Active directory using LDAP connector
please help as this is very urgent requirement
thanks in advance
Thanks
ChantiWhat form do you have the user's name in ?
ANTIPODES\alberteString searchFilter = "(&(objectClass=user)(samAccountName=alberte))";[email protected] searchFilter = "(&(objectClass=user)(userPrincipalName=[email protected]))";Albert EinsteinString searchFilter = (&(objectClass=user)(givenName=Albert)(sn=Einstein))";or using Ambiguous Name Resolution (anr)String searchFilter = "(&(objectClass=user)(anr=Albert Einstein))";or it's even clever enough to useString searchFilter = "(&(objectClass=user)(anr=Einstein Albert))"; -
CONTROL DATA FOR ACTIVITY TYPE NOT MAINTAINED
dear all
i get this error when calculating production order cost
control data for activity type 1000\4230\1420 not maintained for fiscal year 2007
i hv maintained data in kp26
can any one pl help. i am learnign sap pp and hv 4.7 version
thanks and regardsDear Anshuman
my prob. started during cost cal. in prod. order first error was version 0 not maintained for fiscal year 2007, THEN i maintained it in the path as told by you T code OKEQ.
but after that error changed to CONTROL DATA FOR ACTIVITY TYPE NOT MAINTAINED ( 1000/4230/1420)
i maintained data in kp26, but the error is still coming
pl. suggest some solution as i am not able to proceed further.
Thanks and regards
Raj -
How can we find out when master data was activated
Hello Friends,
We are loading master data for one info object directly from R3 to Info Object without PSA.
1) The Request Green in RSMO only tells that data is loaded successfully but it does not give any information about Activation is that right ?
2) How can i find out histroy of when one particular Info Object( Master data ) is activated? any tables or tcodes ?
Thanks
Tonyhi,
1) The Request Green in RSMO only tells that data is loaded successfully but it does not give any information about Activation is that right ?
Ans- yes it give loading details only.
2) How can i find out histroy of when one particular Info Object( Master data ) is activated? any tables or tcodes ?
ans -in SM37 chk any attribute change run is completed , else in RSA1 Tools -> apply attribute change and hierarchy -> you can see the finished and scheduled job.
also u can chk the master data table for any M version records is available.
Ramesh -
HR employee data (ONLY ACTIVE EMPLOYEES) needs to be sent from one SAP syst
Requirement: HR employee data (ONLY ACTIVE EMPLOYEES) needs to be sent from one SAP system to another SAP system.
E.g. of process followed u2013
Tcode - PA30 - Action type u2018Hireu2019 is created for employee A, B, C & D for a specific date. Later another action u2018Retirementu2019 is created for the employee C. So in the current system employee A, B and D are active employees wherein employee C is an inactive employee.
Data filtering is set in the Distribution Model wherein only active employees should be passed when an IDOC is created using PFAL.
The IDOC which is created has all the employees A, B, C & D. The only difference being that for Employee C the segment which has the status u2018Retirementu2019 is discarded and hence this does not satisfy the requirement.
Is there any way in which the Inactive employee (e.g. retired) is restricted from being sent to the IDOC.
Please advise.
RasikaHi Darek,
Thanks for your response.
I cannot use this as the requirement does not allow customised development. I want to know whether the filter can be done solely by customising.
Regards,
Rasika -
Data source active/inactive button grayed out in LBWE
Hello,
When I was activating the Logistics datasource in LBWE, my data source status became red and the Active/Inactive button grayed out? how can I make this data source active again?
Thanks,
KKHi Kumar,
The status will become Red and Active/Inactive is disable due to Extract structure activated but data source is not maintained. This happens once you change the extract structure to Include additional fields. Please do the below step:
in LBWE, Click on Data source (Technical name of your data source beside maintainance) and you will get maintainance screen, change if you want some thing or else leave as it is and save, Now the status for data source in LBWE will become yellow and activate/deactivate will enable.
Regards,
Kams -
How do i determine the date of activation of active data in DSO?
Hi,
I just want to know how do i determine the date of activation of active data in a given DSO?
thanks,
yolyHi,
if you are using BI 7.0 than you use RSA1.
Select the infoprovider you want to check.
Right mouse click and select manage.
Click the Contents tab.
Click on the logs button lower left part of the screen and select Activation of Loaded DSO Data.
This should give you the information that you are looking for.
regards,
Raymond Baggen
Uphantis bv -
Error activating of new data to active data in DSO?
hi friends,
in DSO i want move data from new data to active data , i selected request num and trying to activate, i am getting error, how can i solve it.
Activation of Data / 24.07.2007 / 18:56:08
Time limit exceeded. No return of the split processes
Resource error. No batch process available. Process terminated
Resource error. No batch process available. Process terminated
SID Generation
Resource error. No batch process available. Process terminated
Preprocessing and Postprocessing / 24.07.2007 / 19
Activation of M records from DataStore object DSO_ANI terminated
ple let me know how can i solve
regards
suneel.Hi Suneel,
I think this problem remains unanswered.
The issue behind this problem is, during parellel activation the child jobs acknowledge the parent job about status. If the child job takes long time to read data from active data table, then it times out and fails.
Check the primary index on Active data table and it should be missing in your case. See the se11 index or db02 missing indexes. That is the reason that causes time out. Rebuild the primary index by asking your basis folks and repeat the activation. It should succeed.
Thanks,
Sri. -
Website needs Microsoft Data Access - Active X Data Objects
I have a number of websites for work that are seem to be built around Internet Explorer. When I try to open them on my Mac at home with Safari, I get message that I pasted below.
I'm thinking this might be related to the fact that when I open them on a PC for the first time it shows a similar message, but Internet Explorer prompts me to download and run "Microsoft Data Access - Active X Data Objects", and then it runs fine.
Based on this I'm assuming it's a lack of these "objects" that are causing this problem. Is there any equivalent to these components for the Mac? Anything I can try to access these websites from my Mac? I've tried using Firefox as well, which has the exact same issue.
Right now I've got to fire up my 2006 PC laptop to use Internet Explorer every time I need access to these sites. I realize I could install windows on my Mac with bootcamp and restart in windows every time I need access, but that seems like a waste just to visit 2 websites. Any advice?
+"Scanning Required components...+
+The user's Internet browser requires proper configuration to access our site. Read the following instructions on how to set up the browser properly.+
+Active Scripting Configuration:+
+Select Tools from the Internet Explorer menu bar.+
+Select Internet Options ...+
+Select the Security tab.+
+In the Web Content Zone list, select «Internet».+
+Click Custom level....+
+In the Settings list, scroll down to the Scripting section.+
+Check the Enable option under the «Active scripting» item and click OK.+
+Click Yes to confirm the change in the security settings.+
+In the Internet Options dialog box, select the «Local intranet» and repeat steps 5 to 8.+
+Click OK to close the dialog box."+Hi,
Try this...
From your Safari menu bar click Safari / Preferences then select the Advanced tab. Enable the develop menu.
In the menu bar click Develop / User Agent.
Try IE 8, 7, or 6.
No guarantees but can't hurt to try. ActiveX requires Windows.........
Carolyn -
Data Plan Activation Failure after I updating to 8.0.2
After I updated my Ipad2 to 8.0.2, I have not been able to use my cellular date. It keeps "searching" for connection and then pops up "Data Plan Activation Failure". What do I do?
I turned gmail off and turned on iCloud email. It won't load either.
-
Going form Note 2 to Note 4, can I use wifi and xfer data before activation
Already have Verizon. I want to update the Note 4 first,move over my apps and data before activating the Note 4, can I do this?
When I do, do i use the SIM card in the Note 2 in the Note 4?PhilF61
I definitely want to make sure your new phone will be up and running just the way you want! The best way to fully transfer data will be to back up your current phone and then activate the new phone to transfer. Purchase history will be stored if you use the same Google account, and you can backup data using Verizon Cloud too: http://vz.to/1udgXIg
RuthW_VZW
Follow us on twitter @VZWSupport -
Problem in Activating from New data to Active data in DSO
Hi All,
For my DSO I am fetcdhing some fields from other DSO table , through END Routine ,. After running the DTP , I am getting data for the fileds which i am fetching through routine in New data Table.
After Activating the New data table to Active data table I cant able to see my data.
ie in Active data table there is no data for the fields which i am fetching through end routine after activating the request . One more thing my request is activated sucessfully.
it shows ready for reporting.
Please help me on this................................Hi ,
After unchecking the checkboxes mentioned in my previous post and still if you dont find data in active table then I think the problem might be because of Database Statistics not being up-to-date for your ODS tables which causes a delay in data load completion process. You can try refreshing the Database Statistics of your ODS both tables and indexes (active data table, change log table and new data table). This probably may resolve your problem.
Srikanth.
Maybe you are looking for
-
How to restore MacBook Pro to factory
How do I restore my MacBook Pro to factory settings
-
My question is which better to use every time my iPad until the battery is 0% then charge it to 100% then use it again until it is 0% or i use it until the percentage is low then charge it until it is 70 - 80 % percentage then use it but not let it c
-
I am using macbook pro 13" Retina with Yosemite. All updates are done. The issue of mail attachment persists even after apple support suggesting to uncheck and check the "windows friendly attachment" option. The behaviour is very uncertain.
-
Hi all, using: Oracle9i Enterprise Edition Release 9.0.1.3. I have a table that looks basically like this: SQL> select labour_rate_id, organisation_id, commence_date_time, termination_date_time, labour_rate 2 from labour_rate 3 where organisa
-
Connecting JMS servers together into a cluster
Hi I am just wondering if anyone tried (or is it even possible) to connect JMS servers from different providers (say BEA and Sonic) together in a cluster of some sorts? Thanks