Date of installation of apps

Can anybody tell me where I can find the dates of installation of apps on my phone. There is an app installed that transfers money of my bank account with the code: FTMSC. The bad thing is I wasn't aware of this going on and cost me allready € 80.

On iTunes on a computer. You can see your purchase history.
Open itunes.
At the top select the iTunes Store.
On the right hand side click on "purchased"
Check it out.

Similar Messages

Will re-syncing iPhone to a new iTunes installation delete app data?

As per topic above. Recently reformatted my computer before I was able to do any backups (Just couldn't get into Windows).
Now I have re-installed everything and have synced my iPhone with a new iTunes library, but I have not synced my apps as I am scared that whatever data on the apps on my iPhone will be deleted.
Will this happen?

Basically wjosten's advice worked for me. I had wiped my MBP and installed Snow Leopard but forgot to make a backup of my itunes library. My main concern was the app data. I followed the instructions but chickened out at step 8 when iTunes warned me that it would erase the phone and ..." so I cancelled to just make sure I had everything right but it went ahead and made some weird sync anyway which left about 20% of my apps on the phone. So I restored from that backup I made at Step 6 and this time said ok to the sync at step 8.
But then I checked the sync apps checkbox but either didn't realise or something happened that meant all the apps were unchecked. Next thing I see is "removing {app name}" which started freaking me out. I'm not sure what to do from this point so I started checking all the apps and pressed apply. However, it may work better if you cancel the sync but even better would be to have all apps checked in the first place. In the end end though I didn't loose any data - even on the apps that I saw getting removed just moments earlier. WOOHOO!!
One side effect of this is that the apps are not in the same screen order as before... but that is either my fault or a very very small price to pay
So this method works but you have to have the guts to click ok
Also, be careful of your voice memos - I'm not sure if the instructions here cover those but they are not paid content so I would make sure you use something like http://www.macroplant.com/phonedisk/ to back them up.

Is there a possibility to check the date on which an app was re-installed?

I am aware of the purchase history which allows me to see when I first time installed a certain app, but when I delete that app from my iPhone then re-install it from the Cloud on another day, say X, the purchase history doesn't help me seeing this date X, which is for me the re-installation date.
Is there a possibility to check the date on which an app was re-installed?
Thank you

I read that you say the content should be deleted, so I still wonder if they get deleted, especially after I have just noticed this;
Install an App then delete it while it is running in the background. Head to the store again and install it, you will see that the app is still in the background.
I believe some records of the App exist after deleting it, regardless of who can access them. I will try checking with somebody who has a Jailbroken device.

IPhone installs one app at a time, why?

I have an iPhone 4S and an iPad 2. Both are running iOS 6.1.3. For the longest time, the way my iPhone and iPad install or upgrade apps has differed.
For my iPad, the install/update process for multiple installs/updates works like this:
1. Download first app
2. Start installing the app and simultaneously start downloading next app.
For my iPhone, the process works like this:
1. Download app.
2. Install app.
3. Once install is finished, download next app.
In other words, my iPad will download an app without waiting for the prior one to finish installing, while my iPhone downloads and installs one app at a time. Because of this it takes longer to update apps on my iPhone than on my iPad. This is case over both cellular and Wifi.
I'm assuming the way the iPad is working is the correct method. Why doesn't my iPhone work the same way?

Whil you can run two apps at the same time, i.e. Music and Safari, you can only see one app at a time.

On iPhone 5c iOS 8.2, I go to settings, cellular, use cellular data for: Under "use cell data for are my apps but they are greyed out how can I ungrey them??

iOS 8.2 on iPhone 5c, goto settings, cellular, use cellular data for: all my apps under "use cellular data for" are greyed out. I've restart and hard reset. Looked thru all settings. Can someone help??

Did you try to reset the phone by holding the sleep and home button for about 10sec, until the Appel logo comes back again? You will not lose data by resetting.
If this does not work, did you try to switch off Cellular Data, restart the phone and switch it back on again?

HT201299 Not enable or disable cellular data for certain iOS apps and features from setting? I keep it off but when I go to other app it on automatic

I can't enable or disable cellular data for certain iOS apps and features from setting.
When I off data for specific application and go to other option it automatic on all application
Any one can help

SOLUTION! (NO NEED TO RESET YOUR IPHONE SETTING!)
I have the same issue for the last two weeks. But i have already managed to solve the issue all by myself. When i go to Settings > Cellular > below the tab "use cellular data for:", i turned off some apps which i didnt want to use with cellular data. As soon as i go back to Settings, and then i went back to Cellular, the apps which i had switched off earlier, automatically turned back on.
Here's the solution:
Either you're using wifi or cellular data, first of all you're gonna hafto turn on the cellular data use for App Store. Once you have turned it on, go to App Store application. Update ALL the apps which have new updates available. If it asks you to log in your App Store, just do so. If there's something wrong with your debit or credit card information, it will ask you to update to a different card. Just do what it asks. Put in a new credit or debit card info and fill in the forms provided. The card you're using must be usable and has usable balance in it. Let's say atleast $10 to $20. As soon as it confirms your card successfully, the app updates will start automatically. Continue to update all the apps. After all updates are finished, go back to Settings > Cellular. Try to switch on or off some apps for data use and recheck.
Try it yourself! Have a nice day and don't put a blame on Apple for this.
From Malaysia, with love.
Please hit LIKE button if this solve your issue. Thank you very much! (:

Ipad - how to push Exchange calendar events to iCloud account? MobileIron is used to get Exchange data -- is there an app to push the ipad version of the events to iCloud?

ipad - how to push Exchange calendar events to iCloud account? MobileIron is used to get Exchange data -- is there an app to push the ipad version of the events to iCloud?
There are two separate calendars on ipad (ios 7.1) one for icloud, one fo exchange. I have tried a couple of calendar apps and while they do a good job of showing the events in the app - they don't push (synch) back to iCloud. Any thoughts on an app that will take my ipad calendars and synch them to a single icloud calendar/account?
Thanks

Hi
You asked about a recommendation for an app to paste a group of addresses into the To, Cc or Bcc fields of an email?
Our "MailShot Pro" app is the only one we know of on the App Store that creates special "group contacts" in your address book which contain all your groups email addresses, but can be used just like regular contacts from most of your favourite apps. We now have nearly 50000 people using it, and growing steadily every day.
Here is a link if you would like to know more “MailShot Pro” (itunes link).
A free version is also available if you'd like to try it out with a small nmber of contacts.
If you need any customer support just contact us at the website, we're always happy to help.
Peter
www.solubleapps.com
Disclosure: I am the developer of this app and may benefit from its sale- (but so might you)

Wrong dates shown in iPad app store updates list

The dates listed for the app updates in my iPad's app store are wrong! They used to show the date of each app's most recent update, but now they show each app's ORIGINAL availability date. My iPod, on the other hand, doesn't have this problem. What's the deal? When looking at the updates list, the "updated" date is much more useful than the app's original date. Any idea what's wrong and how to fix it?

I talked to Tech support they told me to go into my time and date settings change to manual setting and set the date and time forward to a random time (several months ahead worked for me) updates will clear then go back to automatic time. It is bizzare but it has worked for me. I certainly do not want or need to see all my updates I hope Apple will change this silly feature.

Best way to export and import data from an iPhone app?

How do people here prefer to export and import data from an iPhone app?
For example, suppose your app creates or modifies a plist. It might be nice to provide that plist to the user for separate backup and later allow them to re-import it.
How do people do that? Email the plist to an address? If so, how would one later get it back in?
Is there a common way people do this kind of thing?
Thanks,
doug

Or maybe the best approach for this is some sort of file synchronization feature? Is there a way of having files from the app's filesystem automatically get stored on the computer's filesystem when synchronizing and vice-versa?
doug

Updating to ios 6.1.5 leads to data loss in several apps (bento, teacher tool)

After updating to ios 6.1.5 I have experienced severe data loss in several apps. Can I return to older version of ios to rescue data?

All you can do is restore from backup
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How to edit BI Publisher Report Data Model in Fusion Apps?

Hello All,
I am experiencing issues while modifying the BI Publisher data model in Fusion Apps. Here is the summary of issue, Please assist me.
Issue: I have modified the SQL query of Data Set in Data Model, while saving it is prompting for Flex Filed, Parameter Values. I could find the parameter values from default package , but i dont see the Flex Fields values in package. Can you please assist me where can be these Flex Fields are defined in Fusion Apps.

When you go into the Edit Dashboards page, do you see a BI Publisher icon to your left? just drag and drop that into your page and then click on properties to include your BI Publisher report. If you get an error then check(only after doing the above) whether you have these entries in your InstanceConfig.xml
<AdvancedReporting>
<ReportingEngine>XmlP</ReportingEngine>
<Volume>XmlP</Volume>
<ServerURL>http://localhost:9704/xmlpserver/services/XMLPService</ServerURL>
<WebURL>http://localhost:9704/xmlpserver</WebURL>
<AdminURL>http://localhost:9704/xmlpserver/servlet/admin</AdminURL>

</AdvancedReporting>
Thanks,
Venkat
http://oraclebizint.wordpress.com

Issue while loading data to sample essbase app using odi

while executing data load the error is
Now, while loading data to an essbase app i am getting the following error:
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 23, in ?
com.hyperion.odi.essbase.ODIEssbaseException: Error records reached the maximum error threshold : 1
at com.hyperion.odi.essbase.ODIEssbaseDataWriter.loadData(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
at org.python.core.PyMethod.__call__(PyMethod.java)
at org.python.core.PyObject.__call__(PyObject.java)
at org.python.core.PyInstance.invoke(PyInstance.java)
at org.python.pycode._pyx4.f$0(<string>:23)
at org.python.pycode._pyx4.call_function(<string>)
at org.python.core.PyTableCode.call(PyTableCode.java)
at org.python.core.PyCode.call(PyCode.java)
at org.python.core.Py.runCode(Py.java)
at org.python.core.Py.exec(Py.java)
at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.g.y(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
Caused by: com.hyperion.odi.essbase.ODIEssbaseException: Error records reached the maximum error threshold : 1
at com.hyperion.odi.essbase.ODIEssbaseDataWriter.sendRecordArrayToEsbase(Unknown Source)
... 32 more
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Error records reached the maximum error threshold : 1
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.g.y(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)

Hi,
It means in your options of the KM you have it set to quit when it hits one error, if you set it to 0 (infinite) then it will not stop no matter how many data load errors it hits.
If you set it to 0 and run the interface, depending on how you set up the options in the KM it can write to two log files, which you should check.
Cheers
John
http://john-goodwin.blogspot.com/

How do I delete all of the documents and data/progress in an app through Apple/iTunes?

I don't mind if I have to delete and reinstall an app to do it but so far that hasn't worked, I'd like to delete all the data asociated with an app from my iPod permanently - it seems to be impossible to do on the app so is there a way to do it through Apple/iTunes? Thx

Hey lab1950,
If you check out page 44 of the iPod touch user guide, it says that to delete a song from an iPod touch with iOS 6.1, swipe the song, then tap Delete. This also works with Albums or Artists if you want to delete multiple songs at once.
iPod touch user guide
http://manuals.info.apple.com/en_US/ipod_touch_user_guide.pdf
Cheers,
David

Using FDM to transfer data from one HFM app to another

We are facing a project in which we need to load data from one HFM app to another. There're some mapping going so it was advised that FDM be used.
However, the HFM extract files contain all data on the rows. While for the FDM multiload, the data from different periods need to be layed out on the columns. Also, we have multiple scenarios/years of data to handle. What would be the best approach? Has anyone had similar experience to load data from one HFM app to another using FDM? Thanks!

It appears that this is some kind of migration project due to the scope of the data contained in the single file? If so whatever you do is like ly to be trow away once the migration of data is completed.
You have a couple of options:
1) Get the data extracted from HFM in multiple files instead of one bulk file, broken down by scanario,year & period
2) Take the single data dump file produced by FDM and manipulate it yourself to get the data in a more usuable format for processing through FDM.
Option 2 could be achieved via any ETL tool or a custom file parsing script. What may be more attractive to you and allow you to fully leverage your investment in FDM is that you could use the PULL adapter that ships as part of the FDM adapter suite to perform this transformation exercise. The PULL adapter takes a flat file input and allows you to use all the in built functionality of FDM to transform it and output a modified flat file (or series of flat files). You could use it to produce multioload files or a series of files broken down by scenario,year,period.
Whatever you do I would suggest that break the single data file down into smaller chunks as this will help with the iterative debugging process you will inevitably have to undetake whislt migrating the data to the new application.

Cellular data only for specific apps

Is there a way by which i can enable cellular data only for specific apps? Lets suppose i want only mail and viber to run on cellular. So how do i enable cellular network only for viber and mail

Hello all,
I have been using the iPhone 4S for about a year and I never had problems untill a few days back. Since about a week, my 3G settings for applications installed automatically reset.
Path >> iPhone screen >> Settings >> Mobile(Cellular) >> Use Mobile Data For >> "List of all apps installed"
Against each application, you have an option to either enable / disable the mobile data usage:
Eg:
App Store          (swipe left to disable || swipe right to enable)
Contacts          (swipe left to disable || swipe right to enable)
Facebook          (swipe left to disable || swipe right to enable)
Facetime          (swipe left to disable || swipe right to enable)
Weather          (swipe left to disable || swipe right to enable)
You Tube          (swipe left to disable || swipe right to enable)
etc...
Problem:
If I don't want You Tube to use mobile data, I would normally swipe left to disable thus the application will not start / stream any music if its on 3G/4G. Since a few days, whenever I disable the option for any app... go back to the main screen and recheck the settings, I see its enabled again!
The error I see when I start the app is:
MOBILE DATA IS TURNED OFF FOR "YOU TUBE"
You can turn on mobile data for this app in settings
<Settings>     <OK>
When I go back to settings... I see the option is enabled.
Now I dont know what and how this happened all of a sudden. I have tried resetting the network settings for my iPhone, and it has not helped me.
My iPhone is updated to OS 7.0.4 and all apps are updated.
Anyone can help me on this error and how do I fix this?
FYI... I have no problems connecting to WiFi at all!

Date of installation of apps

Similar Messages

Maybe you are looking for