Date of joining  is not  showingup in the payslip...

Hi Experts,
In ourpayslip,the date of joinging is picking up from the latest org.assignemnt date.
It has to come from 0041 IT.In the single fields it is showing 0001 so it is showinup in recent org reassignment date.
But it has to pick from IT 0041  with DATETYPE  U1 (Hire date)
What should we mention the Single field Date of joining  of PE51 .....Im confident that The table should be P0041
Here my question is What should be the table field  and output length.
Could u please check the PE51  and let me know the  what could be the table field  and output  length to be maintained  to extract  from the datetype  U1.
Please advice.
Regards,
Sai.

sai
I advice you to check this one on ur own as the cloumn and rows length will differe from each other form
so test it play with and go ahead
all the best

Similar Messages

  • Data Source Z*** is not defined in the source system

    Hello All,
    I am facing a well known problem extracting data from R3 to the BI side. On both sides I've got SAP ALL.
    I created data source on R3 DEV side, tested it and it extracts data. I've replicated metadata on BI side and activated the data source. The problem starts once I create the info package as no data is availble in PSA.
    I went to extractor checker and tried to start the extraction and I could see the message: data source Z**** not defined in the source system.
    I tried to locate the data source through RSA5 and I cannot see that it is availble there.
    Can you please help and advise where the problem is?

    Hi Neb,
    It can be related to many issues, one of them can be RFC connection issue. Please check the link below :-
    Datasource xxx is not defined in the source system
    It might give you some of ideas. Also if possible can you tell what Datasource are you having problem with.
    Regards
    Sunny

  • I can't change the date on my photos. i click on adjust change and date and it does not give me the earliest date to change

    I can't change the date on my photos in events. I click on adjust date and time of selected photos and the date that I can edit is the oldest photo date and not the earliest. Help?

    iPhoto should be showing you the date of the first photo you selected.
    What do you want to achieve? It should not matter, which photo you select to adjust the time, because all photos will be corrected by the same fixed increment, if you use "Adjust Date and Time".
    If you want to set all photos to the same time, use "Photos > Batch Change > Set Date to" instead.

  • Data at base level not consolidating to the parent entity

    HI All
    I have an issue with data which exisits at the base level but do not consolidate to its parent entity.
    For example,
    2000
    2001
    2002
    2003
    Here only 2002 has data, but that is not appearing at 2000. I have checked the accounts and there we have set the IsConsolidated property.
    The consolidation happens for other entities like 1000 & 3000. The problem is only with 2000.
    Has anyone come accross this before and what is the best way to fix this?
    Thanks,
    Appu

    Is it possible that you have not activated consolidation of the entities for the period you want to consolidate? Check out the Ownership Management screens for the entity 2000. Are all child entities set to Active? Is the proper Method set? Is the PCON = 100?
    Also have you tried to select one of the child entities (e.g. 2001) and run the Force Calculate Contribution? What does this entity return at the +[Contribution]+ level?

  • SSIS Data flow item does not show on the Tools Choose Tools Item

    I would like to add share point to my data source for my SSIS project.
    After I installed Share Point Source and Destination list, I went to Tools Choose Tools Item, but SSIS Data Flow tab does not show. I went to SSIS Tools box, but the components are not there.
    I would like to know are there any way to add Share Point Data source using SSIS.
    Your help and information is great appreciated,
    I use SQL Server 2012 and VS 2010.
    Regards,
    Souris,

    Hi Souris,
    I have installed the SharePointListAdaptersSetup-Beta-2012-01-28.msi in my SQL Server 2012 test environment, the SharePoint List Source and Destination adapters is listed in the Common type items of the SSIS Toolbox. To narrow down the root cause, please
    try the following steps:
    Make sure the SharePointListAdapters.dll exists in the C:\Program Files (x86)\Microsoft SQL Server\110\DTS\PipelineComponents folder.
    Make sure it is installed to GAC successfully, the SharePointListAdapters.dll should exist in C:\Windows\Microsoft.NET\assembly\GAC_MSIL\SharePointListAdapters\v4.0_1.2012.0.0__f4b3011e1ece9d47 folder.
    Refresh the Toolbox and check the Common type items.
    Since the SharePoint List Adapter is a third-party component, I would suggest you ask a question in its dedicated discussion plate:
    http://sqlsrvintegrationsrv.codeplex.com/discussions
    Regards,
    Mike Yin
    TechNet Community Support

  • HT201269 I used Article: HT2109 to transfer everything from my iPod touch 3g, iOS 5.1.1, to my iPod touch 5g, iOS 6.1.3. Why did data from apps did NOT move to the new device? Games are starting over rather than picking up where they were on the old devic

    I used Article: HT2109 to transfer everything from my iPod touch 3g, iOS 5.1.1, to my iPod touch 5g, iOS 6.1.3. Why did data from apps NOT move to the new device? Games are starting over rather than picking up where they were on the old device?

    - If you restored the 5G frmm the iTunes backup of the 3G were th app in the iTunes library of the computer you used? They have to be.
    - If yes then try again. When I first restored my iPad 4 from the iTunes backup of my iPad 1 app data did not transfer. I tried again and it did.

  • Data Flow Task is not executing in the package

    I have a package in which I have a Data Flow Task which will load the data from Excel file to SQL Table.
    The Data Flow Task is executing and loading the data if I execute that particular task only.
    But when I run the whole package, the data is not loading into the table. (Its not even showing in the Data Viewers also)
    FYI: On every run, the Source Excel file will be deleted and created by the previous tasks (before the Data Flow Task)
    Please give me the cause and solution for this.
    Thanks in advance.. 

    Hello Sai -
    Can you please post the structure of your package (screenshot) , unless there is a change in excel connection prior to data flow , there should be no reason for no data.
    As you mentioned the source files are deleted prior to data load , it could mean :
    1 - New files have no data
    2 - The connection of the data flow is dynamically changed to the new files.
    Happy to help! Thanks. Regards and good Wishes, Deepak. http://deepaksqlmsbusinessintelligence.blogspot.com/

  • The fixed value date is empty and not displayed in the VA05 report

    Hi SD Gurus,
    With in the Sales Order in the line item level in the billing tab we have the fixed value date (VBKD - VALDT) were entered. 
    But when we try to execute the report VA05 were the fixed value date column shows empty (i.e without the date it shows the blank).  Can you any one help me with regard.
    We would like to fix this problem.
    Thanks in advance for providing solution to this query.
    Thanks and Regards,
    SAP-SD group

    Hi janarthanam,
    Ok.
    Goto t-code SQVI,SAP Quickviewer.
    Give a name to your query and enter description ,etc.
    Next enter the table from which you want to fetch data,ie,VBKD .
    Select "Layout mode" for displaying data on the SAP screen or "Basis mode " if you want to extract the data to a word doc,excelsheet or a flat file.
    Next you can select the fields you want to display into your report,their position and ascending/descending order,Here make sure u select
    the field u need to display ie. the fixed value date ( VALDT) .
    also select the fields u wish to have in the selection criteria.
    Enter these required information and u would get a report on the SAP screen or in your desired format.
    Hope it will suffice you.
    For any queries ,your are welcomed.
    Thanks,
    Umesh.

  • B2B 11g - B2B-51507 - A data element contains characters not listed in the

    How can we change the character set used in b2b ? We are getting the following error when some non english characters are present in the payload. We see the issue also when CRLF characters are present in the payload.
    Error : Element NTE02 (Description) contains characters not listed in the allowed character set. Segment NTE is defined in the guideline at position 030.{br}{br}This error was detected at:{br}{tab}Segment Count: 4{br}{tab}Element Count: 2{br}{tab}Characters: 5077 through 5121

    What is the version and release of B2B are you using? Have you applied any patches?
    I am asking above questions because there is a known bug in B2B with similar problem and there is a patch available for the same.
    Regards,
    Anuj

  • Data in table control not seen for the Standard Transaction Iview

    Hi
    I am creating one Standard Transaction Iview for CATS .
    While doing print preview in IE 6 , I am not able to see data in Table control(Data Entry Area ).
    Can you please provide me the solution for how I can see the data in Table Control
    Regards
    Ruturaj

    Hi David,
    I too struggled a lot to find the solution ....atlast got it....It possible by exporting and importing the table control values to Database Index.
    1. AT SELECTION SCREEN OUTPUT event  triggers when you SAVE and GET the variant.
    2. So write the logic in AT SELECTION-SCREEN OUTPUT event.
    CONSTANTS: c_vari TYPE char30 VALUE
                             '(SAPLSVAR)RSVAR-VARIANT'.
      FIELD-SYMBOLS: <lfs_vari> TYPE ANY.
      ASSIGN: (c_vari) TO <lfs_vari>.
      IF sy-subrc = 0.
        IF <lfs_vari> IS NOT INITIAL.
          IF ok_code = 'SPOS'.
            EXPORT gt_chars[] TO DATABASE vari(tc) ID <lfs_vari>.
          ELSEIF ok_code = space.
            IMPORT gt_chars[] FROM DATABASE vari(tc) ID <lfs_vari>.
          ENDIF.
        ENDIF.
      ENDIF.
    In the above logic if OK_CODE is 'SPOS', that is for saving the variant with the name <lfs_vari>.
    Similarly if the OK_CODE is other than, 'GET'....that is for retrieving the variant. But in case of getting the variant OK_CODE is not filled with 'GET', but variant will be filled. We should take variant filling as base and do as done above.
    It worked for me.....

  • Why is the date picker icon is not showing on the PDF file?

    Hi,
    I added a date field on a form.
    I can see the date picker icon when viewing the form online but when I download and open the PDF to my computer and open it on Adobe Reader that icon doesn't show up.
    It's important since my users then need to manually enter the date instead of choosing it on the graphic interface (some of my users are older so need all the help they can get)
    Is there an option or something I missing to make the date picker icon show up on the actual PDF file as well?
    Thanks

    >>Duplicate post removed to comply with the Verizon Wireless Terms of Service.  See Re: Samsung Galaxy S5 pre-order?<<
    Edited by:  Verizon Moderator

  • TS1702 I went to update garage band on my iPhone4. When I did it froze in the process. I deleted it and tried to re download it but it is still froze in the loading stage. My software is up to date so I'm not sure what the problem is

    Subject is my question

    Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears)
    Note: You will not lose any data.

  • Cisco SPA525g2 Date and time Not Synced with the PBX server

    Hello,
    We have a couple of SPA525g2 phone connected and registered to our PBX server. We were able to configure 3 extensions on different lines of the phone. However, at times we were encountering issues with the other lines configured on the phone. There are times wherein 1  extension configured on the phone is having one way audio issue, but the other extensions configured on the same phone is working fine. and we have to reboot/reset the phone several times for all the extesions configured on the phone to work.
    Also, whenever we reset the phone, the date and time will be way way behind the current date and time, eventhough we have already set the correct date and time before we reset the phone.
    How can we resolve the one way audio issue on 1 or 2 extensions of the phone, while the other extensions configured to it is working fine?
    How can we make the phone sync the date and time with the PBx server?
    Any input and help regarding this issue is greatly appreciated...
    Btw, date and time  issue not sync with the PBX server is just happening on SPA525g2, we have other phones like SPA303, SPA504, and SPA232D/SPA302D. All other phones' date and time is in sync with the server even though we reset them except SPA525g2.
    Thank you very much,

    PeterMacSF,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • The setting date and time is not working

    Bought an apple TV, installed it as per instruction, connected to my internet but the seting date  and time is not occuring and the activation cannot occur either.  Spent 1 hr on the phone with Apple support staff - they told me it may be a router blockage and to contact my internet provider.  contacted internet provider , they tell me everything is working from their end so must be the apple TV device.  I was told this was easy techonology and that I would not have issues - I have spent 3 hrs on this and truly frustrated as its not working .  any suggestions would help!

    That would be a network issue as you were initially advised. When the date and time can not be set it means it is having trouble connecting to the network.
    Make sure router is up to date, reboot router and ATV. Make sure location is set correctly via ATV and also DNS (settings - general - network - configure DNS - automatic)
    Make sure your router allows access over port 123.
    Failing that try a restore on the unit

  • HT4946 i am not able to restore backup from itunes to my new iphone 5s , itunes shows data may be corrupted or not supported to the attached device what should i do ?

    not able to restore the backup of iphone 5 to iphone 5s , itunes shows a error ager comleting 75 % backup , data is corrupted or not compatible with the attached device , please help me as ther eis important data is saved in the backup.

    Restore the device as new, sync the desired content to the device.

Maybe you are looking for