Date of Last Delivery incorrect in EKEK (sometimes)
Hello!
When I go into ME39 and into the Release Documents, I have correct dates for Last GR (EKEK-LWEDT) but for Last Delivery, it shows me the date (and number) of what was probably the first Delivery received for that contract. (EKEK-LFDKD / LFNKD)
See picture below, notice the inconsistencies. The first wrong case happened in the release generated December 6th 2013, as shown in picture below.
Then starts happening more often in January 2014, and surprisingly in the release generated April 3rh, 2014 the number is correct...
I have already checked these 2 notes, mentioned in the only post about this issue (from 2011), but they are already implemented in my system, since we have 604, SP 14
1337084 Release header contains doc. date instead of delivery date
1309001 Incorrect date for last goods receipt in sched. agreement
Any help would be greatly appreciated!
Thanks!
Gabriel Andrade
Hi,
Seems the note: 1309001 - Incorrect date for last goods receipt in sched. agreement exactly deals the same issue. But if the note is already implemented and the issue is not solved, you may check the note: 1465118 - Release header: Incorrect date or quantity of last GR
If its not solved and you couldnt find any relevant notes, you may raise an OSS ticket to SAP.
Regards,
AKPT
Similar Messages
-
Date of Last.Del field is not updated in EKEK table
Hello All,
We have one date update problem for one Scheduling agreement, the field is LFDKD (Date of Last.Delivery) in the table EKEK -Header Data for Scheduling Agreement Release and this date hasnt been updated only for one SA since 2008 , it remains as it is like 18.02.2008, but the date of last field (LWEDT) is updated correctly till date. So due to this problem , the SA release is sent to the vendor through EDI and the date of last delivery is sent wrongly in 2008 date even though after that many goods receipt has been done for this SA. Any idea why it didnt get update till date ?
Thanks in Advance
BennyHello Benny,
Please check if the following notes can help :
1337084 Release header contains doc. date instead of delivery date
1309001 Incorrect date for last goods receipt in sched. agreement
Regards,
Mauro -
Date of last extraction from DataSource 0HR_PY_PP_2 is not available
Hello all,
We are using this data source to extract data for HR in BW. We are currently on BI 7.0
When I used this datasource in BW development system it worked fine. But now I am trying to extract data using the same datasource in BW QA system and I am getting this error.
"Date of last extraction from DataSource 0HR_PY_PP_2 is not available HR_BIW_PP"
The datasource is delta supported so I am trying to init it, and thats when I am getting this error.
Has anyone seen this message before, can some give some suggestions?
Thanks in advanceJust quick check, check rsa3 if you can get any data and also it seems like it is complaining about changes in extract structure, can you compare the extract structure of the two system manually? If you have made changes to the extract structure, did you move that change in the source system? Sometimes it worth it to replicate the datasource and reactivate the transfer structure using program RSActiTran.
thanks.
Wond -
VLO6if will not show PGR Date in inbound delivery
hi Gurus,
VL06IF will not show the Post good receipt date of an inbound delivery,
need this date inserted in the report.last column good recepit does not show any dates
showing last column empty
please check
thanks,
JoanHi,
Check Note 128150 - VL06: Designing your own display variants. It explains how to do with enhancement V50Q0001.
I hope this helps you
Regards,
Eduardo -
Date Wise Pending Delivery Report
Hi all,
I need a pending delivery report as per the date which user enters. For ex on a particular date what were the pending deliveries and total pending stock which was to be delivered.
Is there any standard report or any Function module available. If not, is there any logic by which we can fulfill this requirement.VL06 gives same data as VL06O/VL06i and gives only real-time delivery status (you can't look at 07/10/2011 date & see what delivery documents were pending PGI, only can see latest delivery status as of now for that date).
So, If "historical" data is needed for past date and status of delivery documents at that time, then need to go with BI report or similar reporting tool where you can set specific parameters like take snap-shot of table(s) of open deliveries due for PGI but not PGI'd on specific date/time. -
Report of Total GR qty/IR qty,date when last GR was passed (latest one)
Dear all
Kindly let me know how to get the below report using input of PO no:
Report of Total GR qty,IR qty,date when last GR was passed (latest one),date when last IR was passed (latest one)
Standard t.code such as ME2n.me2l is not giving the above report.Dear
Try ME80FN and ME2N/L with the setting with Selection Parameters
regds
dev...! -
How to change QCI data in Outbound Delivery Order (VL02N)
HI,
Dear ABAP Experts,
I need to over ride standard Quantity conversion interface data in Outbound Delivery Order with user specific data. Go to VL02N and select item number and click on Additional Quantities button we can see all SAP calculated QCI data for that item. I need to over write these values with User specific data in VL02N. When I do with BDC program I can update only few units what ever visible in QCI screen. When i scroll down or page down and add new values for other units, system is not capturing any function code for scroll or page down function.
Please can anyone guide me if have any BAPI or FM to solve this issue. Delivery order is related to IS-OIL/HPM.
Any help will highly appreciateTry this FM to create Oubound delivery with QCI IS-OILS HPM, additional quantities.
It works perfectly and saves data in LIPSO1 and LIPSO2
OIJ_EL_DOCG_CREATE_DELIVERY
I_TICKET_ITEM-menge
I_TICKET_ITEM-meins
I_TICKET_ITEM-matnr
- QCI convertion values
I_TICKET_ITEM-tstmp
I_TICKET_ITEM-tsteh
I_TICKET_ITEM-tdich
I_TICKET_ITEM-werks_d
I_OIJNOMI-docind = 'S' for sales order document
I_OIJNOMI-docnr
I_OIJNOMI-docitm
- fill table T_ERR_LOG with one blank line because it raise an index error
T_ERR_LOG -
Schedule line date vs actual delivery date
Hi All,
Is there any standard report or work around available to compare customers schedule line date vs actual delivery date
Thanks & Regards,Hi Abir,
I think your talking about a "On time Delivery report" to track actual delivery against the quoted delivery.
There is no standard report available in SAP for this.
This is hard to track if you have maintained multiple schedule lines for a one single line item.
(Where you maintain multiple delivery dates in schedule line level to quote multiple delivery dates. If you have maintained multiple line items to quote multiple delivery dates, this would have been easy)
Because you do your delivery based on your sales order line item. Not based on your schedule lines. Therefore in your delivery line item table (LIPS) you cannot see Schedule line number. Therefore you cannot compare quoted delivery against actual delivery date.
Assuming you have maintained your multiple delivery dates in Schedule line level, this is how you have to proceed.
- Use VL10E transaction to create delivery against schedule lines.
- Create append structure in the LIPS table to accommodate to carry the schedule line item of sales order in each delivery document + Line Item combination.
- Use this user-exit u2013include MV50AFZ1. Can save the particular sales order schedule line in the LIPS, earlier created append structure field.
Then you have the schedule line number available in the LIPS table, Now you can code your report to capture quoted delivery against actual delivery date.
Hope this helps you !
Anupa -
PO Confirmation Date (OA) & Inbound Delivery Date Report
Dear All,
Please let me know SAP Standard Report
PO Confirmation Date (OA) & Inbound Delivery Date Report
Regards
AmeyHi,
I guess ME2A will give u unconfirmed orders that require a confirmation, but have not yet been confirmed according to the dates configured for your monitoring period. First, ensure that you have such an order
Also, ensure that your confirmation control (OMGZ) has BOTH a value in Monitoring period AND Reference date.
Pls chk note for more information. https://service.sap.com/sap/support/notes/500502
BR,
Krishna -
Report for date variances between delivery and goods receipt date
dear guru ,
i search a standard report for date variances between delivery date in the purchase order and the goods receipt date.
Do you help me ?
ThanksHi,
Use Report ME80FN and here check the delivery schedule option in output screen. -
No dates in Last Modified Date or Added Date
Hello.
Due to some issues with our servers i'm unable to make any SR's so i hope to recive some answers here instead while that issue gets resolved.
When looking in the colums "Added Date" and "Last Modified Date" certain activites have no dates there. When attempting to filter all the activities with a filter "Added Date Equals 'Blank' " ie all aktivites who do not have a date in Added Date, the results are 0 activites. I interpret this as the fields are not empty but for some reason the information is not displayed.781070 wrote:
Hello.
Due to some issues with our servers i'm unable to make any SR's so i hope to recive some answers here instead while that issue gets resolved.
When looking in the colums "Added Date" and "Last Modified Date" certain activites have no dates there. When attempting to filter all the activities with a filter "Added Date Equals 'Blank' " ie all aktivites who do not have a date in Added Date, the results are 0 activites. I interpret this as the fields are not empty but for some reason the information is not displayed.As far back as I can remember, filtering by either of those fields has never worked.
There are a number of reasons why the last modified or added date could be blank. -
First date and last date of current year
Hi
how can i get first and last date of current year, thanks for your helphi,
use FM......... FIRST_AND_LAST_DAY_IN_YEAR_GET
DATA: first LIKE sy-datum,
last LIKE sy-datum.
CALL FUNCTION 'FIRST_AND_LAST_DAY_IN_YEAR_GET'
EXPORTING
i_gjahr = '2007'
i_periv = '24'
IMPORTING
e_first_day = first
e_last_day = last.
WRITE: / 'First Date', first, ' Last Date', last.
Regards
CNU -
Show data of last day of previous month against any day of current month
Hi,
I have fact table which contains data at date level (we have data for oct-2009 to april-2010). Our requirement is to show data of last day of previous month against any day of current month in obiee 11g. I am facing problem in Feb 2010 its picking data of 28-Jan-2010 instead of 31-jan-2010 and for April its picking data of 30-mar-2010 instead of 31-mar -2010.
Any suggestion ???You're asking to filter your data set to only include rows between:
1) last day of the previous month
2) any day of the current month
This can be achieved with prompting in OBIEE Answers.
last day of previous month = TIMESTAMPADD( SQL_TSI_DAY , -(1), TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( CURRENT_DATE) * -(1) + 1, CURRENT_DATE)) . The problem is you need to make query work within Oracle's Answer syntax.
In the prompt, select the operator type for your date dimension as 'between' and default to 'SQL Results'.
For the 'last day of previous month' , use the query:
SELECT
case when 1=0 then Time."Fiscal Date" else TIMESTAMPADD( SQL_TSI_DAY , -(1), TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( CURRENT_DATE) * -(1) + 1, CURRENT_DATE))
end
FROM ENTER_YOUR_PRESENTATION_FACT_FOLDER_HERE
For the current date, use the query:
SELECT
case when 1=0 then Time."Fiscal Date" else CURRENT_DATE
end
FROM ENTER_YOUR_PRESENTATION_FACT_FOLDER_HERE
Another option is to create a last_date_pervious_month variable in the RPD and have that as the default value in your prompt. -
CG02 Date of Last Change to Specification As a Whole
Date of Last Change to Specification As a Whole
Specification (CG02) Administration Data (at the specification header)
reports Whole Specification changed by and changed on.
Performance Assistant (Help) on Whole Specification Changed On reports:
Date of Last Change to Specification As a Whole
Key date on which the specification was last changed.
Except for changes to the header data, the system takes all data that
relates to the specification into account, such as changes to:
Identifiers
Assignments of regulatory lists
Value assignments
Components
User-defined texts
Notes
The key date is specified when the specification workbench is started.
It
is not necessarily the same as the current date.
To determine the date of the last change to the specification in a
customer-defined program you can read out the specification time stamp
using function module EHSB_TMSTMB_READ_TIMESTAMPS, or you can follow
the
instructions in SAP note 874191.
The date of the last change to the specification is always set to the
key
date on which the specification was last processed. This is not always
the date of the last change to the specification (see SAP Note 874191).
We are not able to 1) find SAP Note 874191 or function module
EHSB_TMSTMB_READ_TIMESTAMPSDear Richard
you topic is quite old. Many SAP EHS users do have problems with this. This content in EHS gives rise to a lot of trouble with the end users (according to my experience) especially in the context of "change docs" etc.
Check may be as well:
EHSB_TMSTMP_READ_TIMESTAMPS - Function - ABAP - SAP
Check as well:
Evaluation of specification changes
http://www.consolut.com/en/s/sap-ides-access/d/s/doc/H-$PLMB$SPC_UPDDATS
C.B: -
Regarding the date of last change in sales order...
Hi,
Can anyone help me in the scenario...
I have to pick the date of last change in sales order...whether it is done on Configuration items ,additional data B or on the ordered quantity...
the problem is that it has some customized fields that are included in VBAK....
So i need help regarding this...shud i have to writ a user exit for this....or i hv to do a change in USEREXIT_SAVE_DOCUMENT .
Plz help me..
Edited by: Amit Gupta on May 1, 2008 3:02 PMVBAK-AEDAT will be updated, evenIf you have your custom fields in Sales Order.
Regards,
Naimesh Patel
Maybe you are looking for
-
Cant use my iMessage in my macbook pro and receive my last emails
i cant use my imessage in my mac cause its say that : message cant log in to my email cause my login ID or pasword is incorrect but when i try to get ito my email account i can opened, the problem is only in my macbook pro. the other problem is th
-
Custom Measure in Script logic
Hi, We have a custom measure created which is more or less the same as the YTD, but it starts not at the beginning of the year, but instead it starts at a given month. The measure creation was ok and we can use it perfectly well in reports and input
-
Re: Does anyone know where the data base
We do maintain a searchable indexed archive at http://pinehurst.sagesoln.com/listarchive. Recently because of Sage office moves and other IT intensive activities I've been lax about getting it updated. I'll try to get it straightened out in the next
-
If I have a normal printer plus an airport express device, do I need a wifi router as well?
-
Why is atv slow to buffer after connecting with cat5 cable
Why is atv slow to buffer after connecting with cat5 cable