Date of video recording missing after "Log and Transfer"?

Hello, I am importing AVCHD video from Sony HDR-SR10. The clip item properties have not imported the dates when the video was recorded. It just has a date of Last Modified.
Is it hidden anywhere or can I add it to the file/clip?

Hi
OR - there is a Paper and Clip solution - Tedious but working.
(At least with old SD-video from miniDV tape Cameras)
A Double import/Capture is needed
a. via FireWire - the full quality video (without meta data)
b. analog out from Camera (set to show Date & Time) - to an A/D box and import
this
(alt way Camera to a VHS/VCR then back to or via Camera to Mac)
Now put High quality sequence on track 1 and analog copy on track 2
crop analog copy on track 2 to show Date & Time Only.
Yours Bengt W

Similar Messages

ARTIFACTS AFTER LOG AND TRANSFER! please help!

i was given a p2 card to log and transfer. after my first attempt to log and transfer, the sound was way out of sync and the video was strobing. then i deselected the option to remove advanced pulldown and drop frames from the settings preferences. i then log and transfered again and this seemed to fix the initial problems. however, now my clips have artifacts every few seconds that look like little patches of random colors. what are these and how can i fix them. any help is greatly appreciated. thanx.

In the L&T window...play the footage. Can you see them there? If you don't have P2CMS from Panasonic, download it and use it to view the footage. See if this break up is on the original footage.
I have seen this, but it appeared on the master footage.
Shane

Crashing after Log and Transfer

I am experiencing a FCP crash after using Log and Transfer to import P2 files. The material is on an external FW800 drive. I go to Add Custom Path in the Log and Transfer dialog box, point the software to the CONTENTS folder of each captured P2 card, the list populates with the clips, I drag the files into the que, and they import as usual. All is well and good until I X out of Log and Transfer, and when I do that, FCP crashes. I have not experienced this when capturing directly from a camera. This has happened over and over since beginning this project, and we are still yet to get all the material into the machine for editing.
Also, in case it is pertinent, I am using a MacBook Pro 2.2 GHz Core i7 machine with 8GB RAM.
Any ideas or has anyone else experienced this? Thanks in advance!
-Van

First thing I'd try is trashing your preferences. Google preference manager from digital rebellion. It's a free download and in invaluable. It's so cool you'll WANT to pay for it. It allows you to store a good set of preferences, trash them when they get funky and then restore the good set, including all the cool stuff you created.
ANYWAY, I'm in the habit of saving every which way from Tuesday after something interesting has happened, like a capture or L&T. I know that's not a solution, but a best practice. hopefully a pref trash will set you right.

Trying to delete original files on card after Log and Transfer in FC 7

Log and transfer is working great. But how do I delete the original files on my 32 gb class 6 card? Can't just select and hit delete. In fact theres a typo in the pop up box, "Warning, The selected media cannot deleted". They forgot the "be". Weird.

Hi,
as you have seen already, you can't delete those files using the L&T menu; however you can delete those files either from within the camera's menu or accessing the card directly from the OSX.
Regards,
Armando.

After Log and transfer, does FCE creat a copy of the clips on my camcorder?

Where does it save them to if yes?
Thanks for any input

Welcome to the world of digital video. Yes, it does consume large amounts of disk space, and you should expect to purchase one or more external FireWire hard drives if you get into this in a meaningful way..
When you log & transfer your video with FCE, the video is transcoded to Apple Intermediate Codec for editing. Depending on how you shoot (720 vs 1080) your video will take 25GB-50GB per hour of video. Here's more info about AIC -> About HDV and the Apple Intermediate Codec.

Best way to import MTS (AVCHD)/missing clips using Log and Transfer

My footage (Sony HDR 500) of an average project consists of approximately 10 hours film and 1600 clips. When I use the option Log and Transfer to import in FCE not all clips are imported in FCE. All other clips are consecutively numbered and cannot be compared with the numbering of the clips on the camera anymore. As a result it is, with those large amounts of clips, almost impossible to find out which clips are missing.
Importing takes a very long time (is that normal?) so I would like to run this proces at night, but due to this missing clips problem I am afraid to do this so it is not a good option for me. Does anyone recognize this problem?
To avoid all this I now convert all clips with Voltaic to .mov before importing. At least I know for sure that I have all clips imported, but it is so cumbersome and it takes a lot of time too. This proces I do in steps because I am afraid to start everything at once. After converting the project almost takes 120 GB.
It takes days before everything is imported and that frustrates me. If the same material is imported in Edius for example it only takes an hour (tested) so it appears to be an FCE/Apple problem. Is there any way to accelerate?
I am working with an iMac from 2010, 2,8GHz quadcore i7, 16GB intern geheugen met snow leopard.
I hope someone can help me out.
Thanks, Jacqueline

While I have not seen the exact problem you describe, 1600 clips is a lot of clips to import at once - so is 10 hours of video.
If you are using FCE to Log & Transfer directly from the camera, your clips are automatically being transcoded to QuickTime/Apple Intermediate Codec(AIC) during importing, which explains the long time it takes to ingest the clips.
Also, QT/AIC files are much, much larger than the AVCHD clips in your camera. If you are shooting 1920x1080 video, 10 hours of AVCHD translates into roughly 450GB of QT/AIC clips. It is possible that you may be a) running out of disk space, or b) exceeding the scratch disk minimum allowable free space set in FCE > System Settings. If so, that could explain why not all your clips are being imported - FCE is probably stopping the Log & Transfer process when it hits the disk space limit.
Regarding alternatives, I'm not so sure about Voltaic. The Voltaic documentation says it only supports H.264 in QT/.mov files, and that would not be usable in FCE. Check some of those clips to see what codec they are. I suspect they are H.264. (Also, you referred to the converted clips taking 120GB space, which just happens to match the AVCHD storage capacity of your camera ... and AVCHD is a form of H.264 video, so they take up about the same disk space.)
In order to edit your clips in FCE, they need to be QT/AIC. Two alternatives come to mind - Clipwrap and MPEG Streamclip. Both can convert AVCHD video to QT/AIC, and both support batch conversion. If it were me, I'd consider Clipwrap first, for this volume of material, since Clipwrap was specifically designed for AVCHD.
The reason importing is so much faster in Edius is that it can import & directly edit AVCHD clips; Edius basically just copies the clips from the camera to your hard drive. FCE has to convert the clips to QT/AIC first, before you can edit the video, and that takes considerable time.

Digital Video Recorder with Firewire 400 and new iMac

I just got a new iMac which has only 1 firewire800 and no firewire 400 ports. My digital video camcorder has a firewire 400 cable to transfer taped recordings to the computer (I want to import using iMovie 09). So, do I simply need to buy a new firewire 800 cable that will plug into my digital camcorder? The reason I'm hesitant is that I've tried using a USB connection, and iMovie 09 didn't open and doesn't recognize that the digital camcorder is connected when I use USB. Does iMovie 09 just no longer recognize my several year old Samsung digital camcorder, or does it just not recognize it with a USB connection, and it will be fine if I get a firewire 800 connection that fits the new iMac? Is there another type of converter--e.g., a cable that allows a firewire 400 to plug in on one end and has the firewire 800 connection on the other end?
Thanks

Thanks for the reply. I went ahead and got a new cable and now I can plug for digital video camcorder into my new Mac. Unfortunately, as I feared, the Mac still doesn't recognize the camcorder. I checked the system profiler with the camcorder plugged in, and under Firewire Bus it reads Unknown Device:
FireWire Bus:
Maximum Speed: Up to 800 Mb/sec
Unknown Device:
Manufacturer: 0xF0
Model: Unknown
GUID: 0xF000FFFFFFFF
Maximum Speed: Up to 400 Mb/sec
Connection Speed: Up to 400 Mb/sec
Sub-units:
Unknown Unit:
Unit Software Version: 0x10001
Unit Spec ID: 0xA02D
Am I just out of luck--the new mac just doesn't recognize my slightly out of date digital video recorder? Or should I be able to get a driver to make it work?

I cannot import my AVCHD files by using log and transfer. I can see all the files, but when I add the file to import que it doesnt work, the status is a red (!) and says that its no data. I have tried with different cards and different cardreaders, but it

I cannot import my AVCHD files by using log and transfer. I can see all the files, but when I add the file to import que it doesnt work, the status is a red and says that its no data. I have tried with different cards and different cardreaders, but it is still the same. Why?!

Please give us more specific information -
What make/model camcorder are you using?
Are you absolutely certain this is AVCHD video? Tell us more about the video settings you used in the camcorder (eg, frame size, frame rate, quality level)
Why are you attempting Log & Transfer from a card reader instead of from your camcorder? Have you tried doing Log & Transfer from your camcorder?
Are the SD cards straight from the camcorder, unaltered, or are you just using the cards as storage?
Are you using FCE 4.0 or FCE 4.0.1?

I cannot log and transfer videos larger than 4 gb

I have final cut express 4.0.1, Macbook pro intel core duo 2 ghz, 2 gb ram, Canon HF100.
I saved my raw video onto a external drive, which is also my scratch disk. I have been able to log and transfer short videos fine. When I try to do this for longer videos, I get an exclamation point on my long and transfer window and my clip transfer is in idle.
I have noticed that when the long videos (over 5 min) are transferring, their sizes get bigger but then max out at 4 GB.
My audio is set to plain and I have the latest OS. I also changed my recording settings to match my playback settings = RT safe, video quality dynamic, frame rate dynamic.
Please help.

How is the external formatted?
It should be Mac OS Extended.
Most drives are pre-formatted to suit Windows FAT32, file sizes are restricted if so.
Al

Audio out of sync after Log and Transferring

So, I'm working on a project for school and I shot everything on a Panasonic HVX200 at 720p/24fps. I have everything saved onto a LaCie external and is connected via USB 2.0. When I go into Log and Transfer, all the clips look great and playback without a problem. But, after I "Add Clip To Queue" and try to play it back on the timeline or canvas, the audio is out of sync (it's almost twice as fast) and the video almost looks inferior.
Any advice would be great. I really want to start working on this project, since it's due Thursday afternoon.
Thanks and regards,
Christian

In the P2 Import window...in the P2 Browser, there is a little sprocket drop down menu. Click on that and choose PREFERENCES. Uncheck REMOVE PULLDOWN and then try importing again.
Shane

Importing a lot of video clips from a Sony camera to FCE; during the Log and Transfer process, is there a way to add multiple clips to the browser instead of one at a time?

Importing a lot of video clips from a Sony camera to FCE; during the Log and Transfer process, is there a way to add multiple clips to the browser instead of one at a time?

Select one and click cmd-A which selects them all.
Then click the import button if it hasn't started already.

Log and Transfer results in video twice the normal speed

I'm working with a Panasonic DMC – TS2 which is AVCHD. I just want to use the log and transfer to pull the video off the card and into final cut express but when I do the video is (compressed?) into half it's normal speed but the audio is not. So for example I have a video clip that is 1:11:33 in length and when I pull it in it is 35:45 and the audio does not match up at all and everything is sped up in the video. I have searched extensively through the forms and online and I am totally stumped. How do I get the video pulled over normally?

Streamclip is free and does a fine job.
The trick with Streamclip is to setup the _Export to Quicktime_ to match exactly the properties of the FCE Easy Setup selected.
The Easy Setup governs the Timeline settings.
FCE loves to have the clips entered into the Timeline matching the clips, then, there will be no constant rendering issues or other grief.
http://www.squared5.com/
Al

Can't log and transfer avchd video

I was used to the firewire, mini-dv tape capture process, but have been confused about how to import my video footage from an AVCHD camcorder into Premiere Pro CS5 on my mac.
The capture window doesn't work with the camcoder connected by USB or with the memory card from the camera in a USB card reader.
When I use Final Cut Pro it has a log and transfer option that opens a window where all of the clips from the camcorder or the memory card are shown and you can preview the clips and even set in/out points on the clips before deciding which ones to import and how much of each clip to import. This can save hard disk space by not copying over useless footage.
That was the way that the capture worked with firewire also, with both Premiere Pro and FCP, and I'm surprised that this functionality is not available with avchd files in this version of Premiere for the mac.
How can I preview the video footage and select which clips to import or set in/out points in Premiere Pro CS5?
Thanks for any advice.

You should probably ask this question in an Adobe Premier Pro forum. This forum area is specifically for Apple's Pro Video applications.
-DH

Log and Transfer Video Ingestion problem

I have a Sony camcorder that uses AVCHD on a HD. Problem is that I have clips that don't want to transfer over using Log & Transfer - only the audio is transfering. I can still see the video on the tool, but the preference for bringing over the video is grayed out - only the audio check box is checked, not the video - as a result no video is coming over - just audio clips.
I saw other posts on this topic, but no resolution. I'm using FCP Studio (latest version - I think 7.02. This is quite frustrating. Anyone have an idea? Is it a camera problem or a FCP problem? As I can see the video on the camera and in the Log and Transfer window, it feels like a software glitch.
Help!
[email protected]

Thanks Tom...so simple...sort of like "did you take the lens cap off?"

Why is there an 'Error: No Data' sign when importing in Log and Transfer?

Hello,
I am trying to import clips from my Panasonic HDC-SD100 camcorder into Final Cut Express 4. I am using the Log and Transfer window and am able to import most of my clips. However, every time I import there are a handful of clips that are left idle and an 'Error: No Data' sign appears next to them. They have not been imported to the Scratch Disk, and yet there doesn't seem to be anything wrong with them because they playback on the viewing screen in the Log and Transfer window. Can anyone help me to determine what is wrong?
Many thanks.

Some of the descriptions you are using are kind of confusing.
"first 2 controls of each DO line(s)"
"button 1 of DO lines 1 and DO lines 2"
"control 2 of DO lines 1 and DO lines 2"
What is the difference between "button 1" and "control 2". I am going to assume you mean the same thing when you say "button" vs. "control" but just decided to change terminology in mid-sentence
You need to write out a Truth table to describe what you need done. The way you have the description written, you are already using the word "OR" to describe the different situations. That is going to be a key part of your program.
This shows:
(DOlines button1 AND button2) OR
(DOlines2 button1 AND button2) OR
(DOlines button1 AND DO lines2 button1) OR
(DOlines button2 AND DO lines2 button2)
Attachments:
002[1]_BD.png ‏11 KB

Date of video recording missing after "Log and Transfer"?

Similar Messages

Maybe you are looking for