Date parameter to SQL query
Hi,
I am using from_date and to_date parameters. Data type and Param type for both are 'Date' and my Format string is 'dd/MM/yyyy'
I need to pass these two values to my data model which is SQL query. Whenever I use below WHERE clause I am getting
"ORA-01858: a non-numeric character was found where a numeric was expected", Please let me know how to fix this error.
trunc(a.scan_timestamp) between to_char(to_date(:p_from_date,'DD/MM/YYYY'),'DD-MON-YYYY') and
to_char(to_date(:p_to_date,'DD/MM/YYYY'),'DD-MON-YYYY')
Hello,
if you choose Date for Data type and Parameter Type for the parameters then the format of your date has nothing to do with your selection.
Please try
trunc(a.scan_timestamp) between :p_from_date and :p_to_date
Wolfgang
Similar Messages
-
How to add a parameter to sql query in report
Hi
How to add a parameter to sql query in report.
Parameter is from Visual studio
example:
select * from tab1 where dl=parameter???
I have VS 2008 prof CR XI R2, mysqlHello,
If you have this API available then you can modify the record selection formulae in code to add filtering:
string recordSelectionFormula = "{T_INV_RPT_ADDR.IND_PROMUS} = {?P_PROMUS?} AND {T_INV_RPT_POINT.INVOICE_DATE} = DATE(2008, 05, 31) AND {T_INV_RPT_POINT.CHECKOUT_DATE} = date(2008, 04,29)";
CrystalDecisions.CrystalReports.Engine.ReportDocument.RecordSelectionFormula = recordSelectionFormula;
You have to format and follow the rules as in the Designer so not too much work to get this to work.
CR for .NET may not have the ability so you will need to upgrade to a Developer version of Crystal Reports.
Thank you
Don -
Can we use formula column in lexical parameter in sql query ...
hi
can we use formula column in lexical parameter in sql query ...
as example
i want to give
select * from & c_table
forumula
function c_table
if :p_sort = 1 then
return 'dept'
else
return 'emp'
end;
c_table formula column
is this possible ...
i have such example in oracle apps reports
if i try in ordinary report usinf emp table it show error ..
how we can give formula column...
please help me in this regard...
Edited by: 797525 on Feb 20, 2012 9:31 PMthanks sir,
iam not exactly saying select * from &c_table but some thing that like columns in select stmt also will be populated in user_parameters ,there are lot of table select.......from mtl_demand md, mtl_system_items msi, mtl_txn_source_types mtst, mtl_item_locations loc &C_source_from &C_from_cat
&c_source_from and &c_from_cat formula column and there are defined at report level only ......
pl/sql code &c_source_from is
function C_source_fromFormula return VARCHAR2 is
begin
if :P_source_type_id = 2 then return(',MTL_SALES_ORDERS mkts');
else if :P_source_type_id = 3 then return(',GL_CODE_COMBINATIONS gl');
else if :P_source_type_id = 6 then return(',MTL_GENERIC_DISPOSITIONS mdsp');
else if :P_source_type_id = 5 then
if :C_source_where is null then
return NULL;
else
return(',WIP_ENTITIES wip');
end if;
else if :P_source_type_id = 8 then return(',MTL_SALES_ORDERS mkts');
else if :P_source_type_id is null then
return(',MTL_SALES_ORDERS mkts,
MTL_GENERIC_DISPOSITIONS mdsp,
GL_CODE_COMBINATIONS gl ');
else null;
end if; end if; end if; end if; end if; end if;
RETURN NULL; end;
this is forumula column i hope that you understand what iam saying
please help me in this regard....
thanking you... -
Can we use Data Pump to export data, using a SQL query, doing a join
Folks,
I have a quick question.
Using Oracle 10g R2 on Solaris 10.
Can Data Pump be used to export data, using a SQL query which is doing a join between 3 tables ?
Thanks,
AshishHello,
No , this is from expdp help=Y
QUERY Predicate clause used to export a subset of a table.
Regards -
Passing Parameter to SQL-Query
Hello ,
i have an SQL Query as Data Source of my Crystal Report . I d like to pass the parameter to my SQL-Query.
Parameter ?city
Query1
select
Order ID,
City, -- How to pass my ?city here
Amount
from Orders,
thanx ..You can do this by using the 'Add Command' feature.
Click Add Command -> Create your ?City Parameter -> type SQL statement:
select
Order ID
where City='{?City}'
Make sure you add single quotes around your parameter.
Regards,
Zack H. -
Hello,
I have a simple SQL query in a report.
select
null as "Complete",
a.col1,
a.col2,
a.col3,
a.col4,
b.col2
from TableA a, TableB b
where a.id = b.idThere is a known issue in apex 4.0 that is causing the "When No Data Found" message to work incorrectly so that this is returned:
report error:
ORA-01403: no data found
Is there a way to return a message in a SQL statement? If not, any suggestions on how I can convert this in the existing report to PL/SQL would be appreciated.
Thanks!
MattI would like to do something similar to this (below) but the only option that is given other than "SQL Query" is “PL/SQL function body returning a SQL query”
I'm not sure how to do this as a funciton.
declare
vComplete Varchar2;
vCol1 Varchar2;
vCol2 Varchar2;
vCol3 Varchar2;
vCol4 Varchar2;
vColB2 Varchar2;
Begin
select
null as "Complete",
a.col1,
a.col2,
a.col3,
a.col4,
b.col2
into vComplete,vCol1,vCol2,vCol3,vCol4,vColB2
from TableA a, TableB b
where a.id = b.id
Dbms_output.put_line(vComplete,vCol1,vCol2,vCol3,vCol4,vColB2);
Exception
When no_data_found
Dbms_output.put_line(vComplete,vCol1,vCol2,vCol3,vCol4,vColB2);
When others
Dbms_output.put_line(‘exception handling message’);
End; -
Why some columns are not read into Power Pivot when reading data from a SQL query
I have this SQL query that I want to use to read data to PowerPivot from:
SELECT Score.FieldCount as fieldcount, Score.Record.GetAt(0) as predicted_gender, Score.Record.GetAt(1) as probability_of_gender, Score.Record.GetAt(2)
as probability_of_m,
Score.Record.GetAt(3) as probability_of_f, Score.Record.GetAt(4) as customerkey
FROM
SELECT * FROM dbo.myCLR1(
dbo.MyCLR2('c:\fILES\MLSM.xml'),
'SELECT * FROM [dbo].[Customer]') Input
) Score
After I click 'Finish' in "Table Import Wizard", I can only get 1 column (FieldCount) in Power Pivot window. Why don't I get the other 4 columns? If I save the result to a table I do get all columns but my goal is to dynamically present the result
so that's not an option. Can anyone shed some light?
Thanks,
Chu
-- Predict everything. http://www.predixionsoftware.comIf I only pass in query as
SELECT * FROM dbo.myCLR1(
dbo.MyCLR2('c:\fILES\MLSM.xml'),
'SELECT * FROM [dbo].[Customer]') Input
I do get 2 columns (FieldCount and Record as shown below)
-- Predict everything. http://www.predixionsoftware.com -
How do I pull SharePoint 2013 list data using a SQL Query
I have been asked to write a sql query to pull data from a SharePoint 2013 List.it needs to return all the columns
Basically a Select all from the specific SharePoint list Database
I do have the list GUID ID. But not sure which SQL Table or Database to look in for list data.. the site and the list is in our main SharePoint site collection.
the query only needs to be saved in SQL serverI know it isn't support but sometimes you have to share data with other programs....
I'm stuck.. I was able to get this far...
SELECT * FROM dbo.Lists
where tp_Title ='List Name'
how do I pull the columns of the list?
I think I still need the specific list not just the master list dbo....
those two links do not work for SQL server and SharePoint 2013 -
Morning all,
I've just been assigned a report-related project but I have not created much of anything in C# or .Net before!
I was wondering if someone could help me get started. Here are the specifications:
Basically, I am to create an automated report application. I have the query and I will include it further down
in this post. The page is to have a couple blanks to specify the Start Date and End Date and replace those dates in the query, and generate the report. What I need some help on is how to make the SQL query work in the application which I will connect to the
intended database to generate the report (basic I know, but I'm new at this) on Visual Studio 2010. I also need some help on programming the Start Date blank and End Date blank so that what the user types in for those blanks will replace the date fields in
the SQL query, then generate the report with the new dates.
I appreciate the help!
The SQL query and what the dates are replacing:
select
PTH.INST_ID ,
PTH.EMPLOYEE_ID,
DBH.HR_DEDUCTION_AND_BENEFITS_CODE,
replace(DB.DESCRIPTION,',',''),
DB.WITHHOLDING_LIABILITY_ACCOUNT_MASK,
DBH.HR_DEDUCTION_AND_BENEFITS_ID,
DBH.CHECK_DATE,
DBH.CHECK_NO,
DBH.FIN_INST_ACCT_ID,
replace(replace (DBH.COMMENT,CHAR(10),' '),CHAR(13),' '),
DBH.HR_DEDUCTION_AND_BENEFIT_CYCLE_CODE,
DBH.LENGTH,
DBH.EMPLOYEE_COMPUTED_AMOUNT,
DBH.EMPLOYEE_BANK_ROUTING_NUMBER,
DBH.EMPLOYEE_ACCOUNT_TYPE,
DBH.EMPLOYEE_ACCOUNT_NUMBER,
DBH.EMPLOYER_COMPUTED_AMOUNT,
DBH.EMPLOYEE_GROSS_AMOUNT,
DBH.EMPLOYER_GROSS_AMOUNT,
DBH.PAYROLL_EXCLUDE,
PTH.VOID_DATE,
PTH.BATCH_QUEUE_ID,
B.BATCH_CODE,
BQ.FY,
BQ.END_DATE,
BQ.COMMENTS,
BQ.BATCH_CRITERIA_USED,
BP.COLUMN_VALUE,
PTH.REPLACEMENT,
P.LAST_NAME,
P.FIRST_NAME,
P.MIDDLE_NAME
from PY_EMPLOYEE_TAX_HISTORY PTH
INNER JOIN PERSON_EMPLOYEE PE ON
PE.INST_ID=PTH.INST_ID AND
PE.EMPLOYEE_ID=PTH.EMPLOYEE_ID
INNER JOIN PERSON P ON
PE.INST_ID=P.INST_ID AND
PE.PERSON_ID=P.PERSON_ID
LEFT JOIN HR_EMPLOYEE_DEDUCTIONS_AND_BENEFITS_HISTORY DBH ON
PTH.INST_ID=DBH.INST_ID AND
PTH.CHECK_DATE=DBH.CHECK_DATE AND
PTH.CHECK_NO=DBH.CHECK_NO AND
PTH.EMPLOYEE_ID=DBH.EMPLOYEE_ID
LEFT JOIN HR_DEDUCTION_AND_BENEFITS DB ON
DB.INST_ID=DBH.INST_ID AND
DB.HR_DEDUCTION_AND_BENEFITS_CODE=DBH.HR_DEDUCTION_AND_BENEFITS_CODE
LEFT JOIN BATCH_QUEUE BQ ON
PTH.BATCH_QUEUE_ID=BQ.BATCH_QUEUE_ID
LEFT JOIN BATCH B ON
B.BATCH_CODE=BQ.BATCH_CODE
LEFT JOIN BATCH_PARAMETER BP ON
BQ.BATCH_QUEUE_ID=BP.BATCH_QUEUE_ID
AND BP.COLUMN_NAME = 'SUPPRESS_DIRECT_DEPOSIT'
------Please change the WHERE condition for date range of the month you need to run this for.
WHERE PTH.CHECK_DATE >='07/01/2013'
AND PTH.CHECK_DATE <='07/31/2013'
and BQ.BATCH_CODE='BAT_PY_PAYCALC'
and bq.fy=2014
ORDER BY PTH.INST_ID ,
PTH.EMPLOYEE_ID,
DBH.HR_DEDUCTION_AND_BENEFITS_CODE,
DBH.CHECK_DATETry this code. The Server name will be the same name when you use SQL Server Management Studio (SSMS). It is in the login window for SSMS. I assume you are using SQLSTANDARD (not SQLEXPRESS) which is in the connection string in the code
below. I also assume you have remote connection allowed in the database.
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Data;
using System.Data.SqlClient;
namespace ConsoleApplication1
class Program
const string DATABASE = "Enter Database Name Here";
const string SERVER = "Enter Server Name Here";
static void Main(string[] args)
DateTime startDate = DateTime.Parse("07/01/2013");
string startDateStr = startDate.ToString("MM/dd/yyyy");
DateTime endDate = new DateTime(startDate.Year, startDate.Month + 1, 1).AddDays(-1);
string endDateStr = endDate.ToString("MM/dd/yyyy");
string connStr = string.Format("Server={0}\\SQLSTANDARD;Database={1};Trusted_Connection= True;", SERVER,DATABASE);
string SQL = string.Format(
"select\n" +
" PTH.INST_ID\n" +
",PTH.EMPLOYEE_ID\n" +
",DBH.HR_DEDUCTION_AND_BENEFITS_CODE,\n" +
",replace(DB.DESCRIPTION,',','')\n" +
",DB.WITHHOLDING_LIABILITY_ACCOUNT_MASK\n" +
",DBH.HR_DEDUCTION_AND_BENEFITS_ID\n" +
",DBH.CHECK_DATE\n" +
",DBH.CHECK_NO\n" +
",DBH.FIN_INST_ACCT_ID\n" +
",replace(replace (DBH.COMMENT,CHAR(10),' '),CHAR(13),' ')\n" +
",DBH.HR_DEDUCTION_AND_BENEFIT_CYCLE_CODE\n" +
",DBH.LENGTH\n" +
",DBH.EMPLOYEE_COMPUTED_AMOUNT\n" +
",DBH.EMPLOYEE_BANK_ROUTING_NUMBER\n" +
",DBH.EMPLOYEE_ACCOUNT_TYPE\n" +
",DBH.EMPLOYEE_ACCOUNT_NUMBER\n" +
",DBH.EMPLOYER_COMPUTED_AMOUNT\n" +
",DBH.EMPLOYEE_GROSS_AMOUNT\n" +
",DBH.EMPLOYER_GROSS_AMOUNT\n" +
",DBH.PAYROLL_EXCLUDE\n" +
",PTH.VOID_DATE\n" +
",PTH.BATCH_QUEUE_ID\n" +
",B.BATCH_CODE\n" +
",BQ.FY\n" +
",BQ.END_DATE\n" +
",BQ.COMMENTS\n" +
",BQ.BATCH_CRITERIA_USED\n" +
",BP.COLUMN_VALUE\n" +
",PTH.REPLACEMENT\n" +
",P.LAST_NAME\n" +
",P.FIRST_NAME\n" +
",P.MIDDLE_NAME\n" +
" from PY_EMPLOYEE_TAX_HISTORY PTH\n" +
" INNER JOIN PERSON_EMPLOYEE PE ON\n" +
" PE.INST_ID=PTH.INST_ID AND\n" +
" PE.EMPLOYEE_ID=PTH.EMPLOYEE_ID\n" +
" INNER JOIN PERSON P ON\n" +
" PE.INST_ID=P.INST_ID AND\n" +
" PE.PERSON_ID=P.PERSON_ID\n" +
" LEFT JOIN HR_EMPLOYEE_DEDUCTIONS_AND_BENEFITS_HISTORY DBH ON\n" +
" PTH.INST_ID=DBH.INST_ID AND\n" +
" PTH.CHECK_DATE=DBH.CHECK_DATE AND\n" +
" PTH.CHECK_NO=DBH.CHECK_NO AND\n" +
" PTH.EMPLOYEE_ID=DBH.EMPLOYEE_ID\n" +
" LEFT JOIN HR_DEDUCTION_AND_BENEFITS DB ON\n" +
" DB.INST_ID=DBH.INST_ID AND\n" +
" DB.HR_DEDUCTION_AND_BENEFITS_CODE=DBH.HR_DEDUCTION_AND_BENEFITS_CODE\n" +
" LEFT JOIN BATCH_QUEUE BQ ON\n" +
" PTH.BATCH_QUEUE_ID=BQ.BATCH_QUEUE_ID\n" +
" LEFT JOIN BATCH B ON\n" +
" B.BATCH_CODE=BQ.BATCH_CODE\n" +
" LEFT JOIN BATCH_PARAMETER BP ON\n" +
" BQ.BATCH_QUEUE_ID=BP.BATCH_QUEUE_ID\n" +
" AND BP.COLUMN_NAME = 'SUPPRESS_DIRECT_DEPOSIT'\n" +
" WHERE PTH.CHECK_DATE >='{0}'\n" +
" AND PTH.CHECK_DATE <='{1}'\n" +
" and BQ.BATCH_CODE='BAT_PY_PAYCALC'\n" +
" and bq.fy=2014\n" +
" ORDER BY PTH.INST_ID\n" +
",PTH.EMPLOYEE_ID\n" +
",DBH.HR_DEDUCTION_AND_BENEFITS_CODE\n" +
",DBH.CHECK_DATE", startDateStr, endDateStr);
SqlDataAdapter adapter = new SqlDataAdapter(SQL, connStr);
DataTable dt = new DataTable();
adapter.Fill(dt);
jdweng
Could you elaborate more on what this code does in general?
Does it generate a table with the data between specified dates? If so, where is the table shown?
Where does one enter in the specified start and end dates on the Web Application? Do I have to create start and end date blanks and link them to the code for it to work?
Sorry for the inconvenience - I'm just really new at this. Thanks! -
Checking correct data format using sql query
1) I got column date of joining which accepts date in below format
DD-MON-YYYY
DD-MON-YY
MON-DD-YYYY
MON-DD-YY
Month DD,YYYY
Question:- how do i check whether all dates in Date of joining column are in above format or not using sql query?
2) I got one more date column which accepts date in below format
MMDDYYYY
YYYYMMDD
MM/DD/YYYY
MM/DD/YY
YYYY/DD/MM
Question:- how do i check whether all dates in date column are in above format or not using sql query?
sorry if it is a very simple question since I am new to sql and trying to learn ......Thanks for the answers from the group............In short, NO, it's not possible. If you store dates correctly in the database as DATE datatype then you don't have this problem. If you store them as VARCHAR2 you have a problem.
So, you get a date of 20092012
Is that 20th September 2012? or is it 20th December 2009?
What about...
11-Jan-12
Is that 11th January 2012 or 12th January 2011?
Dates should never be stored on the database as strings. That is why Oracle gives you a DATE datatype so you can store them properly.
Also, when dates are passed from an application to the database, the application should be passing them as DATE datatype, and the application interface should be designed to accept dates from the user in a format specific to their country/locality and it would then know what that format is and automatically convert it to a DATE datatype before it gets anywhere near the database or any SQL. -
To Get List of Tables from Database which has the data 'AAAA' - T-SQL Query
Hi,
I have a database "Adventureworks", I need to get list of tables, which has the data 'AAAA' in their rows.
Is there any optimised or simple way to do this task?
Any T-SQL Query Available
--- Thanks in advance..You can refer the same below URL provided by Praveen:
https://gallery.technet.microsoft.com/scriptcenter/c0c57332-8624-48c0-b4c3-5b31fe641c58
It has the SQL SP - "SP_SearchTables". You can pass parameters the way you want and get the expected output.
-- Search for 'bike' instead of 'AAAA'
Use AdventureWorks2012
EXEC SP_SearchTables @Tablenames = '%', @SearchStr = '%bike%'
-Vaibhav Chaudhari -
How to Get Default Value of a Data Type in SQL Query.
Hi all,
I am creating a procedure which will take input the table name and Column Name.
In the Output i would like to have the data type and default value of that data type which will be used by a another procedure to blank the selected column in the database.
I tried with SET NULL on the column but as the database is of navision the table have property set to NOT NULL.
Here is what i have done till now.
Create Procedure Get_Column_type
@parm_table_name nvarchar(200),
@parm_column_name nvarchar(20),
@parm_result nvarchar(20)OUTPUT
AS
BEGIN
select @parm_result =
DATA_TYPE from INFORMATION_SCHEMA.COLUMNS IC
where TABLE_NAME = '[' + @parm_table_name +']' and COLUMN_NAME = '[' + @parm_column_name + ']'
END
GO
Now instead on write a case statement for so many data types in SQL, i was thinking is it possible someway that above procedure also returns the default value which i can set in another procedure.
Let me know if its possible or not? Thanks in advance.Do you looking for something like this?
create table t10 ( c int default 1)
SELECT so.name AS table_name,
sc.name AS column_name,
sm.text AS default_value
FROM sys.sysobjects so
JOIN sys.syscolumns sc ON sc.id = so.id
LEFT JOIN sys.syscomments SM ON sm.id = sc.cdefault
WHERE so.xtype = 'U'
AND SO.name = 't10'
ORDER BY so.[name], sc.colid
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
Using a URL parameter in SQL Query
Newbie question...
I have been developing a dashboard application, and I have been using input bind variables in the SQL. That all works fine.
What I would like to do is to have a user go to a page via a URL with paramaters like this:
http://atlas:7777/pls/apex/f?p=112:1:9191429456552868531:::::P1_ITM_CD_PASSED:JMINV
where P1_ITM_CD_PASSED is the parameter and JMINV is the value.
Then, I want the SQL to execute using that:
select *
from itm
where itm_cd = ': P1_ITM_CD_PASSED'
I tried testing this on a page. Set up a report region, but it appears that the paramater is not making it to the SQL. "No Records Found".
Is there a simple example out there that anyone knows of? Maybe I am missing an item, computation, process, etc. to be able to utilize the paramater?
Thanks in advancevarad
Thanks for the reply. I did try that, and same results. It seems that the parameter is not getting bound to the variable, or it's getting flushed after the page loads. Here is what debug shows me:
P1_TEST
0.08: show report
0.10: determine column headings
0.10: activate sort
0.10: parse query as: CUSTOM
*0.11: binding: ":P1_ITM_CD_PASSED"="P1_ITM_CD_PASSED" value=""*
0.11: print column headings
0.11: rows loop: 15 row(s)
no data found
Edited by: jmcclain on May 13, 2010 4:01 PM -
Jsf and putting parameter in sql query
Hey,I have a database,and I want for the selected checkboxes that a user checks,to get their Ids from the database.I am assuming that I need a query something like this: SELECT person.Id FROM person WHERE person.Id=?. I am using NetBeans for my project.My questions are
1.How do I make the query?Do I use a string with the above value, and then I ask it where?
2.How do I say that the parameter ? would be the Ids of the selected checkboxes?
3.Is there anything else I have to add in the query to make it right?A while function maybe?
Sorry for the question but I am new in the business!1) This question has nothing to do with JSF at all. Are you familair with JDBC and SQL? If not, start reading tutorials/books about that.
2) You can obtain the selected values in the JSF backing bean and pass it through to a DAO class which should obtain data from the DB.
3) Just some background knowledge and understanding. -
Problem with parameter and sql query
I've a problem with te query of my report. The query is:
SELECT [DESCRIPTN]
,[LOGTIME]
,[STATUS]
,[CARDNO]
,[LOGDATE]
FROM [Granta5P0].[dbo].[TIMELOG32]
where cardno in ({?cardNo})
the parameter as multiple values checked so I can query for more than one card.
If i put just one parameter everything works fine but when I put 2 or more I have his error
[http://www.megagaleria.com/pictures/Pic_10074_25.jpg]
I realized that the field as no ' delimiting the parameters, I have a function that already does it but I don't know how to put it in my sql command.
If anyone can help I appreciateYes, because your parameter is only looking for one card.
where cardno in ({?cardNo})
Will you only be creating querys on two cards or less ?
Are you trying to create an Array?
If two or less you could
where cardno = ({?cardNo}) or cardno = ({?cardNo2})
Maybe you are looking for
-
Need help with dependent lists boxes with ADF.
Hello, I am doing a project that use tree dependent list boxes. Ex. State----> College----> List of courses of the college chosen above-----> The way this should work is when I select the state automatically I want it to change to the correspondent l
-
SQL query returns few rows, but holds on with several Gbs of RAM memory used
If I perform the following query: SELECT d.DocumentGUID, d.DocumentID FROM ImportDataBase.dbo.Document d LEFT OUTER JOIN ContentDataBase.dbo.Document d2 ON (d.DocumentGUID = d2.DocumentGUID) WHERE ( d2.DocumentGUID IS NULL ) -- new document in the Im
-
Reading all function code of a pf-status
Hi, I need to read all the function code of a pf-status. Any idea if there's any table or function module to do that?
-
OS X Lion Crashing on my brand new Macbook Pro 2011 (721)
I have bought a 2011 Macbook Pro (721) 2 weeks ago and then the same day i upgraded it to OS X Lion. (10.7.1) my os x lion have crashed so bad several times during this 2 weeks that i bought my mac, in a way that i could do nothing but holding the po
-
Is NIMODBUS.LLB Compatible With Windows7
Good Morning, I have written code using the nimodbus.llb library using Win2000 and LabVIEW 2009. Works fine. I want to install my application on a new laptop with windows 7. Before I purchase the laptop I'd like to know if it will work. Thanks, Da