Date Picker has to submit the default value after the page load???

Hello All,
I have 2 date pickers 'Start' and 'End' on a screen with report that has a where clause using above values. Start defaults to current date, End defaults to current month end date, I have another radio group with default to Monthly......
Now when the page loads, I see the default values for 'Start' and 'End' date pickers but the report doesn't reflect those values. I added an on change dynamic action, and so when I change the value of 'End' date picker, it submits the page and now the values are reflected in the report........
I tried creating another dynamic action > with event On Page Load.....and disable fire on page load, and to submit the page, this is causing an infinite loop of submitions........can you please tell me how to achieve this with out putting an exclusive submit button on the Screen.......
Thanks for your time.
DK

user12296343 wrote:
Hello All,
I have 2 date pickers 'Start' and 'End' on a screen with report that has a where clause using above values. Start defaults to current date, End defaults to current month end date, I have another radio group with default to Monthly......
Now when the page loads, I see the default values for 'Start' and 'End' date pickers but the report doesn't reflect those values. I added an on change dynamic action, and so when I change the value of 'End' date picker, it submits the page and now the values are reflected in the report........
I tried creating another dynamic action > with event On Page Load.....and disable fire on page load, and to submit the page, this is causing an infinite loop of submitions........can you please tell me how to achieve this with out putting an exclusive submit button on the Screen.......
Thanks for your time.
You don't have to submit the page here.
What version of apex?
What report is it? i.e. Interactive report/Classic report
Depending on your version of apex you can simply use the Page Items to Submit attribute to set the session state

Similar Messages

[svn:fx-trunk] 7553: Fix the default value of the [skinPart] "required" attribute for asdoc.

Revision: 7553
Author:   [email protected]
Date:     2009-06-04 09:32:51 -0700 (Thu, 04 Jun 2009)
Log Message:
Fix the default value of the "required" attribute for asdoc.
Bugs: SDK-21488
QE Notes: None.
Doc Notes: None.
tests: checkintests
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-21488
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelGenerator.java

${ui:cond( uix.current.isNewRow, 'true', ui:cond( bindings.AddProjectNutsoverleg.value == 1, 'true', 'false' ) ) } notice the '.value' it could also be '.inputValue'.
If not there is also an option to make sure that when the checkbox is empty a value is returned anyways this work like this:
protected void processUpdateModel( DataActionContext ctx )
    //First look for the request parameter
    Object cbInRequest = ctx.getHttpServletRequest().getParameter( "nameofthecheckbox" );
    //We only need to do anything if it was not submitted
    if( cbInRequest == null )
      // Get hold of the Form Bean containing the record
      BindingContainerActionForm updateForm = (BindingContainerActionForm) ctx.getActionForm();
      //Get the binding for our particular column
      JUCtrlAttrsBinding checkBoxBinding = (JUCtrlAttrsBinding)updateForm.get( "nameofthecheckbox" );
      //Reset that explicitly to the *unchecked* value
      checkBoxBinding.setAttribute( 0, new oracle.jbo.domain.Number( 0 ) );
    super.processUpdateModel( ctx );
}Maybe this helps.

How we can find out the default value of the initialization parameters

Hi All,
How we can find out the default value of the initilization parameters from oracle database.
Thanks
Shiju

Hi,
you can find currently used parameter values v$parameter and v$parameter2.
if default values is different real values then you can see alert.log.
because in alert.log you will see non default values, rests is default.
Edited by: admin on May 8, 2010 3:41 AM

How to pass current month as the default value in the prompt

Hi,
Could you please tell me how to pass the current month as the default value in the prompt.
I have a report where month is a prompt. By Default it should ahve current month as the default value along with other months.
Please let me know the syntax for the same.
Thanks in advance!!
Regards
Sindhu

Hi,
what datasource do you have? Is it SAP BW or something else?

How to set the default values of the field of the context.

Hi Experts ,
I want to set the default value of the field of the context.
Where and how this declaration should be done.
Thanks in Advance.

In the context tab of the view. Select the attribute for which you want to set the default value.it will show the properties at the bottom. set the Default value property to the value which you want to set as the default value.
Regards
Naresh

How to make the LV front panel controls the current value through the program is set as the default value when the next time you open?

How to make the LV front panel controls the current value through the programis set as the default value when the next time you open?
1110340051

Try this: Re: How to make a VI remember the latest control value?
Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice

Designate a tab in a tabbed panel as the default start tab on page load?

How can I designate a tab in a tabbed panel as the default start tab on page load? Anyone know?

Hi Lightcatcher,
By default, the first tab opens when a page loads. You can drag the tabs left/right and make the desired tab first tab.
Regards,
Aish

Best way to put the default values for the Form Items

Hi,
I am having a form with lot of default values as mentioned below..
Field                      value
created by             :APPL_USER
creation_date         SYSDATE
last_updated_by     :APPL_USER
last_update_date    SYSDATE
item1                     value1
item2                     value2Currently I am using Computation -> After Submit.....so whenever we create/update a record...these computaion takes place and the default values get inserted....THIS IS WORKING PERFECTLY FINE.
I want to know..if this approach is fine OR we may have some better approach to acheive this...????
Thanks,
Deepak

Deepak,
Sample trigger code:
CREATE OR REPLACE TRIGGER "BINS1_APPLICATION_TBL"
   BEFORE INSERT
   ON APPLICATION_TBL    FOR EACH ROW
BEGIN
   -- Description: Insert creation_dt, creation_id,
   --              lst_updt_dt and lst_updt_id
   -- Maintenance:
   -- Date        Actor           Action
   -- ====        =====           ======
   -- 20-Aug-2009 J. Wells         Create.
   :NEW.creation_id := V('APP_USER');
   :NEW.creation_dt := SYSDATE;
   :NEW.lst_updt_dt := :NEW.creation_dt;
   :NEW.lst_updt_id := :NEW.creation_id;
   SELECT APPLICATION_seq.NEXTVAL
     INTO :NEW.APPLICATION_seq
     FROM DUAL;
END bins1_APPLICATION_tbl;
ALTER TRIGGER "BINS1_APPLICATION_TBL" ENABLE
/Jeff

What are the default values for the NetStream.multicast***** properties

I read the api document about NetStream.multicast**** properties, but found no default values were given. Will the default values be changed when FP10.1 release?? Or, the values are always changing at runtime?
I have a web-tv application, it broadcast some live videos created by my friends, I think that the latency and lag-time can be bigger in my app, I want to know the recommended default values for the multicast*** properties.
I think the multicastWindowDuration and liveDelay are the keys. And I am confused between NetStreammulticastWindowDuration and NetStream.bufferTime..they like the same...
Sorry for my poor english, Thanks.

the publisher can set the multicast properties you listed to be the defaults for all of the subscribers of the stream. in addition, the publisher can select whether or not "push" mode is used by changing NetStream.multicastPushNeighborLimit. setting the limit to 0 disables push, setting it to non-zero enables push in the mesh, but only changes the actual push neighbor limit for the publisher. if push is enabled for the stream, each peer will use push mode, but will start out with the global default limit (which is currently 4). this is for safety. we recommend you always leave push enabled.
each peer (including the publisher) can change the multicast stream parameters dynamically. changes are local to that peer.
for the publisher to set the initial parameters for the stream that all peers will inherit as the default, the parameters must be changed on a new NetStream *before* NetStream.publish() is called. example:
   var ns:NetStream = new NetStream(netConnection, groupSpecification);
   ns.multicastWindowDuration = 10; // change default for everybody
   ns.publish("mystream");
   ns.multicastWindowDuration = 15; // change window duration just for publisher, everybody else will start with 10 for this stream
each subscriber can override the multicast stream properties locally, but the overrides must be set on the NetStream *after* receiving a NetStream.MulticastStream.Reset NetStatusEvent.NET_STATUS event in order for the override to stick. overrides must be reapplied each time the NetStream.MulticastStream.Reset event is received.

How to set the default value to the lov item

Dear alll
i have creation page in that two items are there those are lov's
i am calling that creation page from another page
i like this code to set the lov's
OAMessageLovInputBean comp =
(OAMessageLovInputBean)webBean.findChildRecursive("Company"); //grab the item
comp.setValue(pageContext,companyname);
when i set like
when i am saving the records again it is showing error "please select a valid value"
Regards
Sreekanth

Hi Pratap,
I have tried the following code to set default value in OAMessageLovInputBean while loading the page but its not working.
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
String delToLoc = (String)pageContext.getSessionValue("deliverTOLoc");
Number delToLocId = (Number)pageContext.getSessionValue("deliverToLocId");
OAApplicationModule am = pageContext.getApplicationModule(webBean);
OAViewObject poHeadervo =
(OAViewObject)am.findViewObject("PoHeaderMergeVO");
PoHeaderMergeVORowImpl poHeaderVoRow =
(PoHeaderMergeVORowImpl)poHeadervo.getCurrentRow();
if (delToLoc != null && !"".equals(delToLoc)) {
// poHeaderVoRow.setShipToLocation(delToLoc);
OAMessageLovInputBean msb = (OAMessageLovInputBean)webBean.findIndexedChildRecursive("DefaultShipToLocation");
msb.setValue(pageContext,delToLoc );
Please suggest me how to resolve this issue.
Thanks & Regards,
Sunita

Custom Integrator - Date Picker/LOV does not return a value to the cell

Hi,
I have configured a webADI template with a date picker in it. Though the picker is rendered when i double-click on the cell, the selected date is not populated back. Same happens for any other list of values may render in the integrator. Any suggestions on debugging this issue.
Regards,
Vinayaka

I have got the LOV working now. The issue was that I had not provided the table-select-column with the interface column name. It was set to the table column name.
Regards,
Vinayaka

How to set the Default value in the picklist and LOV

Hi All,
I have created a table with some of the columns as picklist and some of the columns as Lovs to insert some data into the tables as per the client requirement.
I want to make one value as default for the picklist and one value as default for the Lov.
Could you please let me know how can we show one value as default in the pick list or Lov.
thanks in advance.
jay

can u please help how can we set the initial value dynamically with the userid
For that i was passing the value from process Request of the lovCO by using the get user id to the vo query in the vo
but its not giving the initial value as default dynamically depending on the user id
could you please let me know the solution.
Thanks
Ajay

How to append the Default value in the QueueValue

Hi Frnds
Could any one help on how to add an default value to an Queueid in SXMB_MONI
My field is ID_PART, its value is ZGRD929
i want this as 00ZGRD929 in the interface in SXMB_MONI

if you are looking for dynamic queue creation, refer;
Setting Queue Dynamically using Adapter Module
Dynamic EOIO Queue Derivation with Adapter Modules

How to set the default value of a database column to NULL

Hello,
I want to set the default value of a column (VARCHAR2(20) to NULL, nut I cannot figure out to do this. I tried the following editing the offline table with JDeveloper:
Default Value : <empty> -> On database NULL
Default Value: '' -> On database ''
When I create a new column, there is no default value on the database side and when I open the tabe properties in the database navigator I can see that the default value is (null). This is what I want to see in the other column as well. I don't know why sometimes a default value is visible on the database side (when generating form offline tables to database tables) and sometimes not.
Perhaps sombody can bring some light in this issue.
Thanks Thomas

Hello Shay,
I have the impression that you don't understand my problem. So here step by step:
1. Create a offline Table TEST with one column TEST: VARCHAR2(20). nullable=true, no default value.
2. Generate the table to the database
3. When you look at the table properties (columns) with the database navigator the following information is displayed (sorry for the formatting):
Column Name | Data Type | Nullable | Data Default | COLUMN ID| Primary Key | COMMENTS
TEST | VARCHAR2(20 BYTE | Yes | (null) | 1 | (null) | (null)
4. Now set the default value for the column TEST in the offline table for example to 'Test'
5. Generate the table to the database.
6. When you have a look at the database table, the default value is now 'Test' (as expected)
7. Now remove the default value of the column TEST in the offline table
8. Generate the table to the database
9. When you have a look at the database table, the default value is now NULL (in uppercase letters without parenthesis)
And this is where the problem starts!
When you generate the table again with the options "Alter/Manual Reconcile" the default value of the column test is considered to be different! But in fact it should'nt be different because nothing has been changed.
Best regards Thomas
Edited by: thmayr on May 28, 2009 9:05 AM
Edited by: thmayr on May 28, 2009 9:31 AM

Can you use a formula field as the default value of a parameter?

I'm wondering if you can use a formula field as the default value of a parameter. I have an date parameter that is being pulled from a stored procedure. When I run the report, it defaults to the current date and time. I would like it to default to he current date and have the time be 00:00:00

Hi,
Unfortunately, you cannot use a formula field as the default value of the parameter.
And, to get rid of the current time and show 00:00:00, all you need to do is Edit the parameter and set the 'Default Value' to 00:00:00. This will take care of the time portion, however the date portion would be set to the year 1899 and not the current date.
Hope this helps!
-Abhilash

Date Picker has to submit the default value after the page load???

Similar Messages

Maybe you are looking for