Date problem in the Planning Run
Hi,
I have a demand(FA) of 50 on 23.7.2007 and stock is initial say for the product P at location L. When I execute the planning a Distribution Receipt (Planned) is created for the quantity 50 on 26.07.2007 (Planned delivery time = 0, GR processing times = 0 and Procurement Type = F). Please let me know if I need to do any setting changes to make receipt date 26.07.2007 before the demand date 23.7.2007 .
Thanks,
Siva.
Does storage bucket profile for your SNP planning area have both weeks and days now? I think having a weekly or daily planning book does not make a difference in that case.
If you are going to use daily buckets, you can set a lead time or planned Delivery time of 2 days.
You dont have to set Period Factor on both Tlane and Product master. The heuristics considers Tlane Period offset. If its not set it looks for the "use period factor" indicator in the product master (make sure you have checked this). If this is set then it considers the value in the period factor there. If this is not checked and/or no value is set then it takes 0.5 default
you will have to get back to weekly storage (not planning bucket) if you want this to move to beginning of the week. If it also has a daily storage bucket then it probably moves between 0 hrs and 23:59 hrs
Similar Messages
-
Function Module to find date by passign the Planning Calendar
Hi All,
Can you tell me is there any function Module to find date by passign the Planning Calendar?
The requirement is i have a planning calender assigned to the Material in the MRP2 view.
Example: Material XXXXXX is assigned a Planning Calendar Z01.
Z01 is defined such that Delivery is on Monday only. This calendar says that the material is received from the Vendor only on Mondays.
So whenever i punch a Sales Order for Material XXXXXX, a PR is automatically geenrated when saving the sales order and the calculation of Delivery dates is also happening at this level.
Basing on this PR a PO is raised to a Vendor for procuring the Material XXXXXX, now my problem is for example the PO is raised today (30.04.2008), but the Materail XXXXXX is available only on next monday in my plant (05.05.2008) basing on my Planning Calendar assigned in the Materail Master, so i have to inform this dealy to my customer at the time of punching the sales order.
So is there any function Module to find date by passign the Planning Calendar?
Thanks for your valuable inputs.
Regards,
SudarshanHi Jorge,
Thanks for your reply.
I am unable to open the Function module which you have mentioned below.
I am working on 4.6 c version of SAP.
Any ways i have found one function module which is useful to my requirement as stated below:
DATE_GET_PERIOD
Thanks and Regards,
Sudarshan -
Hi All,
We Have implemented AD RMS in our organisation recently.But the Problem we are facing here many users those are Ms office 2013 we will get the error"The Data Received from the server running AD RMS didn't match the expected format.contact
your system administrator for further investigation." and those who are in Ms office 2010 Professional it says
"The service is Temporally unavailable.Ensure the you have connectivity to this server.This error could be caused if you are working offline.Proxy setting are preventing your connection or intermittent network issue."
Below are the workaround did,
1.Able to reach to Our pipeline ADRMS cluster.
2.We have a valid Certificate.
3.if we type https://adrms.ourdomain.com its working fine.
4.Manually put the registry setting for effected computers.
5. Applied the Hotfixes:MicrosoftFixit50903,KB2627273.
Kindly help or suggest us to resolve the above issue as many computers in domain are not working with IRM.
Thanks and reqard,
Mohammed Siddiq.Hi Mohammed,
Were you able to fix the issue with CRL disablement?
Did my post help you or make you laugh? Don't forget to click the Helpful vote :) If I answered your question please mark my post as an Answer. -
Checking the master data automatically before the payroll run...
Hi Friends,
Can anyone tell me that, is it possible to check the master data automatically before the payroll run.
If any user forget to maintain any important info-type ( like Cost Distribution ) in time of master data maintenance, SAP allow the Payroll system to run the payroll for that employee. Only in time of account posting the user is able to know the problem and due to rectify the problem they have to delete the payroll.
So, I therefore wants to know that is there any check point or can customized any such things, which will check the necessary info-types before running payroll and generate an error massage about the missing info-type and also skip the processing for that person.
With regards,
Diptenduhave
a look at this report
but before that make sure wht are the mandatory infotypes that are maintained to the employee so that u can come to an idea what are infotypes that are maintained for the memployee
se 38 HTWLINFO read the documentation of the is report mmight be useful -
will apple next update to help fix the location following data problems will the ipod touch 2g be included ?
Chances are the 2g itouch will not be included in the update. Also no one yet knows if it will be fixed in the next firmware but apple has said they know of this bug.
-
Problem in the jvm running in OS2 operating system
Friends,
It's a very urgent need for me.
Please help me to solve this problem.
I have a client server architecture based on RMI.
The server runs in windows(jdk 1.4.2)
and the client runs in OS2 (jdk 1.1.8). (we have no other choice but to use this jvm. forgive me please).
The server is used to upload and download files to the client.
That all works fine.
But as part of my application, I should explore the files in the remote client.
But the jvm in the OS2 is not returning the file.lastModified() correctly.
It is displaying one hour less than the actual date.
I just get the last modified date like this
Date modDate = new Date(myFile.lastModified());
But it is always returning one hour less than the actual date.
I've checked the date and time in the client machine.
It's same as that in the server.
Is that a bug ....?
Plz help me..guys.
regards,
james selvakumarThe server runs in windows(jdk 1.4.2)
and the client runs in OS2 (jdk 1.1.8). (we have no
other choice but to use this jvm. forgive me
please).Forgive? No, but may I extend my condolences?
But it is always returning one hour less than the
actual date.Wild guess - is it possible that your system clock is on a standard time and that this is the filestamp being picked up, but that you've now moved onto daylight savings time so that the time reported by other applications is an hour out?
It just seems like a bit of a coincidence that the US (I think) goes onto daylight savings this weekend and that the UK did last weekend...
Sorry I can't help beyond that suggestion of a possible explanation; I don't have an OS/2 build around any more (Hallelujah!)
Dave. -
How to use the same variable value for data entry and the planning sequence
Hi,
the scenario is the following:
Using the WAD template a user enters cost center plan data. The cost center is selected by the chosen value for the variable "V1".
Afterwards he shall push a button which starts a planning sequence (including saving the data and further functions). This planning sequence uses a filter that also contains the variable "V1".
What or where has it to be defined that the planning sequence uses automatically the same value for the variable "V1" as selected for the data entry?You have to define in the planning function. The planning sequence is only a sequence and it read the planning functions underneath it.
Ravi Thothadri -
I have a field called exp_date data type is date in the database and also in the form.
In the recieving form field this date is entered as 2010/03 (year.month)
In my irradiation form the exp_date( scanned or entered as 201003) YYYYMM, is validated against the recieving table
and then based on the month I have to update my exp_date in irradiation form to the last day of the month. I ndo all the conversion and that works fine.
If march then 31, If april 30 etc.
I have master codes table where we store codes.
01 - 31
02 - 28
03 - 31
etc
v_exp_date1 varchar2(11);
v_exp_dat2 varchar2(11);
v_exp_date3 varchar2(11);
v_udf1 number;
v_complete_string varchar2(11);
v_exp_date date;
Cursor C3 is Select to_char(exp_date,'MM')
from supplies_received
where lot = :plt_irradiation_log_t.lot;
Cursor C2 is select code,udf1 from master_codes
where code_type = 'DAYS'
and term_date is null
and code = to_number(v_exp_date1);
Cursor C4 is Select to_char(exp_date,'DD')
from supplies_received
where lot = :plt_irradiation_log_t.lot;
Cursor C5 is Select to_char(exp_date,'YYYY')
from supplies_received
where lot = :plt_irradiation_log_t.lot;
open c3;
fetch c3 into v_exp_date1;
close c3;
Open C2;
Fetch C2 into v_day,v_udf1;
Close C2;
open c4;
fetch c4 into v_exp_date2;
close c4;
open c5;
fetch c5 into v_exp_date3;
close c5;
v_complete_string := v_exp_date1||'/'||v_udf1||'/'||v_exp_date3;
:plt_irradiation_log_t.exp_date := to_date(v_exp_date1||'/'||v_udf1||'/'||v_exp_date3);
:system.message_level := '10';
commit;
:system.message_level := '0';
v_complete_string is varchar2(11); If I make it date there is no action.
Now my exp_date is null.
I need help to populate exp_date.
Thanks in advance
AnuI think your problem is the TO_DATE you use without giving a format-mask:
:plt_irradiation_log_t.exp_date := to_date(v_exp_date1||'/'||v_udf1||'/'||v_exp_date3);
try changing it to :
:plt_irradiation_log_t.exp_date := to_date(v_exp_date1||'/'||v_udf1||'/'||v_exp_date3, 'DD/MM/YYYY');btw... As fas as i understand your code you only want to get the last day of the date which matches :plt_irradiation_log_t.lot. If so, you may reduce your code to
DECLARE
Cursor C3 is
Select LAST_DAY(exp_date)
from supplies_received
where lot = :plt_irradiation_log_t.lot;
BEGIN
OPEN c3;
FETCH c3 INTO :plt_irradiation_log_t.exp_date;
CLOSE c3;
-- the rest of your code
:system.message_level := '10';
commit;
:system.message_level := '0';
END; -
Is the 4G data problem on the Galaxy Nexus going to be fixed?
Whether or not it's a software or hardware problem something needs to be done. I've been a 5 different forums now and everything I read about the 4G on this phone is negative, except for a few lucky ones. People are only getting 1-2 bars compared to other phones right next to them. They are also saying they are getting heavy decrease in 4G speeds. This is my first 4G phone but I think I would get better speeds than 4mbps download and 3mbps upload? I'm in Pittsburgh, a good 4G area. I've been a customer with VZW for a long time, plenty of upgrades and new 2 year contracts. I just dropped a lot of money on this phone and agreed to stay with VZW for another 2 years, I at least want a phone that is fully capable of getting the full 4G experience. If there is a problem with the Nexus as a device in general please let us know see I can get a different phone, if there is something wrong with the 4G let me know too so I can quit panicking!
Sorry for rambling on but what is truly going on with this phone and the 3G/4G speeds, dropped calls and so on? I'm really getting aggravated and truly feel like I'm unappreciated as a customer.It seems more location based than actually the device. I have various screenshots where I could go hours without even a dropped signal, but randomly for an short period of time I would lose signal due to the network(based on various devices owned with Verizon). Though when I travel to say SF for work I may see it happen 2-3 times a day. When I was with AT&T many years back when they were rolling out their 3G network I had similar problems with dropped calls, and data. Since Verizon is deploying it quickly I doubt they did serious bug checking and figure to do it on the fly as they want to cover everywhere that has 3G with 4G. At some point I believe Verizon want to go VOLTE+(Voice over LTE Advanced) which in turn may help with data prices and network congestions and hopefully they can get it as reliable as possible.
-
A problem about the "Max running jobs". Thanks a million!
Hello everyone,
The "Max running jobs" was set to 15.
(1). When I dragged two assets into FCSvr at a time, in the "Search all jobs" window, I saw the first one being uploaded then transcoded, and later the second one being uploaded then transcoded.
(2). When I dragged them into FCSvr one by one, I saw them being uploaded, then the first one being transcoded, and the second one later.
Thus with (2), there is no need to wait or queue between the uploading of the second one and the transcoding of the first one.
However, I intend to drag the assets at the same time, besides, I wanna attain the aim in (2) that no queue to wait. Could someone tell me how to do it?
With best regards,
Steven Lee
PINZ MediaIf I understand, you used for upload menu "Upload file..."
For uploading and conversation in same time many files you can setup production action (response) for some folder on your device (XSAN, RAID, HDD)
This action can create production for folder, and create assets for media in folder. The add action "SCAN" in response submenu. For transcoding many assets in same time check radio button "Background Analyze" in response "SCAN".
You can read more about that in manual. -
Problem in the first run of "System Center 2012 R2 Operations Manager – Evaluation (VHD)"
Hi All,
I need to evaluate the "System Center 2012 R2 Operations Manager" so I downloaded the Evaluation VHD from this URL:
http://www.microsoft.com/en-us/download/details.aspx?id=40844
I downloaded all the 13x ISO images and used the supplied SC2012_R2_SCOM_EVALVHD.exe to
rebuild the VHD file. I am using Windows Server 2012 Standard.
As indicated by the install instructions, I used “OM2012R2_VHDEval.docx"
to create the Virtual Machine to run Operations Manager. Problems:
1) when I first connected to the Virtual Machine just created in Hyper-V, there was a cmd window saying that was impossible to connect to the domain I provided. i think the domain was correct. Is this error a showstopper or the Operation Manager should be
able to run anyway?
2) To run Operation Manager on the Virtual Machine, the install guide says "On the desktop of the virtual machine, double-click the
Operations Manager Console folder. Operations Manager Console
folder provides access to different parts of Operations Manager. Double-click
Operations Console to open the Operations Manager console."
so I did click on the Operation Console icon but it says the file does not exist in the Virtual Machine. How is that possible if this is a prepackaged Virtual Machine ready to use for evaluation? I checked the pointed folder and actually inside "c:\Program
Files" there is no System Center folder at all..?
Any help would be much appreciated, I'm kind of lost at the moment and not sure how to get started with this (to me) new software.
Thansk.
W.Hi All,
I need to evaluate the "System Center 2012 R2 Operations Manager" so I downloaded the Evaluation VHD from this URL:
http://www.microsoft.com/en-us/download/details.aspx?id=40844
I downloaded all the 13x ISO images and used the supplied SC2012_R2_SCOM_EVALVHD.exe to
rebuild the VHD file. I am using Windows Server 2012 Standard.
As indicated by the install instructions, I used “OM2012R2_VHDEval.docx" to create the Virtual Machine to run Operations Manager.
Problems:
1) when I first connected to the Virtual Machine just created in Hyper-V, there was a cmd window saying that was impossible to connect to the domain I provided. i think the domain was correct. Is this error a showstopper or the Operation Manager should be able
to run anyway?
2) To run Operation Manager on the Virtual Machine, the install guide says "On the desktop
of the virtual machine, double-click the Operations Manager Console folder.
Operations Manager Console folder
provides access to different parts of Operations Manager. Double-click Operations Console to
open the Operations Manager console." so I did click on the Operation Console
icon but it says the file does not exist in the Virtual Machine. How is that possible if this is a prepackaged Virtual Machine ready to use for evaluation? I checked the pointed folder and actually inside "c:\Program Files" there is no System Center
folder at all..?
Any help would be much appreciated, I'm kind of lost at the moment and not sure how to get started with this (to me) new software.
Thansk.
W. -
Is there any problem for the board running HTT@1100mhz (k8n neo2)?
Well, I'm running my system 275x4=1100HTT, can I keep this if it's stable or is it risky? I think I've read somewhere that HTT shouldn't go beyond 1000mhz, could someone elucidate me?
Thanks.You'll get no advantage from doing so. Best quote i heard about htt(ldt) is
Quote
RGone(DFISt)
Speeding HTT out of spec has about the same significance as 8 cars traveling the same direction on a 16 lane highway and you suddenly make the highway 20 lanes wide. It does not speed up anything. All 8 cars already had their own lane and adding lanes did nothing to speed up anything.
most pps drop the 4 to 3 when going past say 255/260
luck -
Is there any problem for the board running HTT@1100mhz?
Well, I'm running my system 275x4=1100HTT, can I keep this if it's stable or is it risky? I think I've read somewhere that HTT shouldn't go beyond 1000mhz, could someone elucidate me?
Thanks.I used 1100(2200) for a while and it was stable, but any thing above that appeared unstable. This was at default voltage with winchester 3500+ processor. Maybe under upped mobo voltage things look different.. ;-)
-
Reschedulig Date Problem in Planning Run
Hello All,
Need Clarification..
The Scenario:
The Requirement date (OrdRes) is 13.02.2009, The planned Order generated is on 13.02.2009.
Now the OrdRes Date Changed Manually to 27.01.2009.
After Background MRP Run, in MD04 against the planned order, the Rescheduling date proposed is 27.01.2009 and exception message is 30 ( Plan process according to schedule).
System is Proposing the date, but not actually shifting the planned order.
If I re-run the MRP Manually, the Rescheduling is happening.
What at first place the rescheduling not happened? after manual MRP run the rescheduling happening?
P.N:
1. The Planned Order is not Firmed
2. The Planning Parameters are same for Background Run and Manual one.
Your inputs are highly appreciated..
Regards,
SivaHi Siva Kumar,
Once u change the delivery date (order rervation of Header), system will create planning file entry for Child materail and set Exception message 30 of child planned order
When u run the MRP next, child material should be included in the Planning Run and rescheduling should be happened .
This is what my finidings, Please check.
Pradeep -
BI-IP To track the planning changes after Data Locking
Hi All,
Need your help to design solution for one critical user requirement in IP.
We all know that in CC Planning, every month after certain date we lock the planning tool and freeze the data. But on exceptional basis, we might require to unlock planning tool to allow users to do some changes in planning data.
User wants to track these changes and report it out. Is there any standard functionality that SAP-IP has provided to track these kind of changes? If not what is the best way to achieve this?
Appreciate any input regarding this ! Thanks a lot!
SomHi,
You need to have additional characteristics for User & Date in your RTP to record who changed when and what plan record.
Then you can create a characteristic relationship of type 'Exit Class' to derive User Id(last changed by) and the date(last modified).
Itu2019s not necessary to include User-ID and Date in any of the aggregation levels, but the Source Characteristic(Company code may be in your case) based on which the values are derived for User-ID & Date, must be present in each aggregation level.
Then create a custom class say ZCL_LOC_CR_LINE_ITEM by taking class CL_RSPLS_CR_EXIT_BASE as super class and then redefine the method DERIVE of interface IF_RSPLS_CR_METHODS in your class.
You can write following code in your method DERIVE:
CLEAR e_t_mesg.
FIELD-SYMBOLS: <l_chavl> TYPE ANY.
ASSIGN COMPONENT '/BIC/ZUSERID' OF STRUCTURE c_s_chas TO <l_chavl>.
<l_chavl> = sy-uname.
ASSIGN COMPONENT '0DATE' OF STRUCTURE c_s_chas TO <l_chavl>.
<l_chavl> = sy-datlo.
This will solve your purpose.
Regards,
Deepti
Maybe you are looking for
-
I got a new Iphone and I made a mistake by creating a new Itunes user, and I can't access all of my music on my old account can I move it to my new account ?
-
I hae upgraded my 21.5 inch iMAC serial number W 89452185 PC bought in the fall of 2009 to Mountain Lion OS X 10.8.2 (12C60) but now I am unable to print with my trusted/old HP Laserjet 3200. Can you please help me? Thank you! Albert ([email protecte
-
i am written frame which reads data from microphone transmit but it is giving exeption java.lang.RuntimeException: No permission to capture from applets the code is import javax.media.*; import javax.media.protocol.*; import javax.media.format.*; imp
-
In the past few days, when I try to open some pages from google search, it leads me to the correct url but it first shows a page that says ATTENTION REQUIRED | CLOUDFARE One more Step Please complete the security check to access www.athriftymrs.com .
-
How can i display opening qtd balances in fsg
hi @ll In oralce R12 how can i display specific account opening qtd balances in fsg in one row ? plz if any 1 know tell me as soon as possible