Date Processing for Select-Option
Dear forumers,
I have a select-option element that takes in a range of PO Date.
The SELECT statement is as follows:-
select ebeln
bedat
ekorg
ekgrp
bukrs
from ekko
into corresponding fields of table gt_ekko
where bedat in s_p_date and " s_p_date is a select-option for bedat
ekorg in s_p_org and
ekgrp in s_p_grp.
If valid low and high dates are inputted here, then there will be data correctly retrieved into the internal table gt_ekko.
However, if the low and high dates are equal, then there will be no data retrieved into the internal table gt_ekko at all.
How can I correct this? Please help. Thanks.
Additionally, is there an easier way to display this PO date (results) in an ALV list as the dd.mm.yyyy format instead of the yyyymmdd format?
Janagar,
I need to have my select-option, s_p_date with an interval (it's part of my requirements).
types:
begin of gs_so_input,
bedat type ekko-bedat, " PO Document Date
eindt type eket-eindt, " Item Delivery Date
lifnr type lfa1-lifnr, " Vendor Number
matnr type ekbe-matnr, " Material Number
ekorg type ekko-ekorg, " Purchasing Organisation
ekgrp type ekko-ekgrp, " Purchasing Group
end of gs_so_input.
data:
gs_input type gs_so_input.
select-options:
s_p_date for gs_input-bedat obligatory,
s_d_date for gs_input-eindt,
s_v_num for gs_input-lifnr,
s_m_num for gs_input-matnr,
s_p_org for gs_input-ekorg,
s_p_grp for gs_input-ekgrp.
Similar Messages
-
Set of default values for Select-Options
Hi Gurus,
I have a requirement where I need to set default values for select options
ex: SELECT-OPTIONS: S_MTART FOR MARA-MTART
default values must be ERSA - HIBE- FHMI - DIEN - GEST
Please tell me how to do it.
Effective replies will be rewarded with full points
KarthikHi,
For each SELECT-OPTION, you can only specify one DEFAULT.
You must specify the default value g in its internal format, e.g. "SELECT-OPTIONS DATE FOR SY-DATUM DEFAULT '19931224'", not "... DEFAULT '24.12.1993'".
The default value g should normally be a literal because, at runtime when you use SUBMIT, it is transferred to the selection options table sel so early that no value can be assigned to the field g. System fields like SY-DATUM are an exception here because the system usually assigns values to them as soon as the report processing starts.
When you use user-defined selection screens in your programs that you do not call using SUBMIT, the DEFAULT value is transfered when the selection screen is first called. In this case, therefore, you can use other fields g.
regards,
sowjanya
Message was edited by: sowjanya suggula -
How to do validations for select-options
Hi gurus,
can you suggest me
how to do validations for select-options
Thanks&ragards,
Kals.HI,
TABLES: BKPF.
TYPES: BEGIN OF TY_BKPF,
BUKRS TYPE BUKRS, "COMPANY CODE
GJAHR TYPE GJAHR, "FISCAL YEAR
MONAT TYPE MONAT, "FISCAL PERIOD
DATA: T_BKPF TYPE TABLE OF TY_BKPF,
W_BKPF TYPE TY_BKPF.
SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_CODE FOR BKPF-BUKRS,
S_YEAR FOR BKPF-GJAHR,
S_PERIOD FOR BKPF-MONAT.
SELECTION-SCREEN: END OF BLOCK B1.
AT SELECTION-SCREEN *
IF S_CODE IS INITIAL OR S_YEAR IS INITIAL OR S_PERIOD IS INITIAL.
MESSAGE E000(0) WITH 'ENTER VLAUES'.
ENDIF.
SELECT SINGLE * FROM BKPF WHERE BUKRS IN S_CODE.
IF SY-SUBRC <> 0.
MESSAGE E000(0) WITH 'ENTER VALID VALUES'.
ENDIF.
reward if useful
thanks and regards -
How to change date format in select-option (mm.yyyy).
Hi,
Plz, How to change date format in select-option (mm.yyyy).
in my selection screen date type selection-option is there ,when i am enter date it's taken dd.mm.yyyy format,but i want mm.yyyy format.
how to set that .
Regards,
Kk.sorry
parameters : pmonyr type spmon or
select-options : sspmon for PGPL-spmon .
or what table ccontains spmon.
regards
shiba dutta -
Date as a select option in sales order report.....
hello guys i want to add sales doc date from as a lower field and date to as a higher field on a selection screen.....so please help me out......i also want to add error message for it.....
Simply add the date field as select-options error msg on choosing wrong date format will be automatically triggred.
For example for order creation date.
select-options: audat for vbak-audat.
anya -
Drop down required for select-options
drop down required for select-options as displayed in VT01N 'shipment type'.
Hi
Check out..this example
data: i_value TYPE vrm_values,
wa_value LIKE LINE OF i_value.
PARAMETERS : p_field TYPE dd03l-fieldname AS LISTBOX
VISIBLE LENGTH 80 OBLIGATORY.
INITIALIZATION.
*-- Populate List Box
*-- TEMKSV - Legacy Value
wa_value-key = 'TEMKSV'.
wa_value-text = 'Legacy Key'.
APPEND wa_value TO i_value.
CLEAR: wa_value.
*-- Installation
wa_value-key = 'INSTLN'.
wa_value-text = 'Installation'.
APPEND wa_value TO i_value.
CLEAR: wa_value.
Setting the selection
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = 'P_FIELD'
values = i_value.
Patil -
is exist restriction for select-options?
for example:
<b> data: ftxt04(4).
select-options: txt04 for ftxt04.</b>Hi,
You can restrict select-options.
SELECT-OPTIONS : S_VKORG FOR TVKO-VKORG MEMORY ID VKO.
Form F1000_RESTRICT_VKORG.
INITIALIZATION.
PERFORM F1000_RESTRICT_VKORG.
Define the object to be passed to the RESTRICTION parameter
DATA lw_restrict TYPE SSCR_RESTRICT.
Auxiliary objects for filling RESTRICT
DATA lw_opt_list TYPE sscr_opt_list.
DATA lw_*** TYPE sscr_***.
Assign selection screen objects to option list and sign
NOINTERVLS: BT and NB not allowed
CLEAR lw_opt_list.
MOVE 'NOINTERVLS' TO lw_opt_list-name.
MOVE 'X' TO: lw_opt_list-options-cp,
lw_opt_list-options-eq,
lw_opt_list-options-ge,
lw_opt_list-options-gt,
lw_opt_list-options-le,
lw_opt_list-options-lt,
lw_opt_list-options-ne,
lw_opt_list-options-np.
APPEND lw_opt_list TO lw_restrict-opt_list_tab.
KIND = 'S':
CLEAR lw_***.
MOVE: 'S' TO lw_***-kind,
'S_VKORG' TO lw_***-name,
'I' TO lw_***-sg_main,
'*' TO lw_***-sg_addy,
'NOINTERVLS' TO lw_***-op_main.
APPEND lw_*** TO lw_restrict-***_tab.
CALL FUNCTION 'SELECT_OPTIONS_RESTRICT'
EXPORTING
restriction = lw_restrict
EXCEPTIONS
too_late = 1
repeated = 2
selopt_without_options = 3
selopt_without_signs = 4
invalid_sign = 5
empty_option_list = 6
invalid_kind = 7
repeated_kind_a = 8
OTHERS = 9.
IF sy-subrc <> 0. "Restriction error encountered for Select
"Option
MESSAGE I001 WITH 'ERROR IN SELECT OPTION'."ERROR IN SELECT OPTION
ENDIF.
endform. " F1000_RESTRICT_VKORG -
need help in validaiton for select-options.
Hi..,
could u paste ur selection screen declarations here !!!
check this..
*"Selection screen elements............................................
select-options :
s_vbeln for vbak-vbeln, " Sales document number
s_vkorg for vbak-vkorg, " Sales organization
s_erdat for vbak-erdat . " Run date
AT SELECTION-SCREEN ON EVENT *
*Validation on Sales document number range...
at selection-screen on s_vbeln.
Perform to validate Sales document number range...
perform f0000_validate_vbeln.
AT SELECTION-SCREEN ON EVENT *
*Validation on Sales Organization range...
at selection-screen on s_vkorg.
*Perform to validate the Organization number user input...
perform f0100_validate_vkorg.
AT SELECTION-SCREEN ON EVENT *
*Validation on Creation date range...
at selection-screen on s_erdat.
*Perform to validate the Creation date of the sales documents...
perform f0100_validate_erdat.
*& Form f0000_validate_vbeln
This subroutine validates the user input - Sales document *
number range *
There are no interface parameters *
form f0000_validate_vbeln.
select vbeln " Sales Document number
from vbuk
up to 1 rows
into vbak-vbeln
where vbeln in s_vbeln.
endselect.
check sy-subrc ne 0.
message e001(zsls640) with s_vbeln-low s_vbeln-high.
endform. " Form f0000_validate_vbeln
*& Form f0100_validate_vkorg
This subroutine validates the user input - Sales Organization *
range *
There are no interface parameters *
form f0100_validate_vkorg.
select vkorg " Sales Organization
from vbak
up to 1 rows
into vbak-vkorg
where vkorg in s_vkorg.
endselect.
check sy-subrc ne 0.
message e002(zsls640) with s_vkorg-low s_vkorg-high.
endform. " Form f0100_validate_vkorg
*& Form f0100_validate_erdat
This subroutine validates the user input - Creation date of the*
Sales documents *
There are no interface parameters *
form f0100_validate_erdat.
select erdat " Creation date
from vbak
up to 1 rows
into vbak-erdat
where vkorg in s_erdat.
endselect.
check sy-subrc ne 0.
message e003(zsls640) with s_erdat-low s_erdat-high.
endform. " Form f0100_validate_erdat
<b>regards,
sai ramesh</b> -
Problem on Search Help for select-option
Hi,
Iam working on a search help for select-option,
is there a way to incorporate select-all or multiple
selection on this?
Thanks!Hi catherine,
1. Just copy paste this program.
(It will POPULATE the SELECT-OPTION,
based upon
MULTIPLE Selection,
selected by the user,
in the help provided thru F4IF_INT_TABLE_VALUE_REQUEST.)
2. Eg. is for BUKRS (company code)
3.
REPORT ABC.
TABLES : T001.
DATA : ITAB LIKE TABLE OF T001 WITH HEADER LINE.
DATA : RETURN LIKE TABLE OF DDSHRETVAL WITH HEADER LINE.
SELECT-OPTIONS : BUKRS FOR T001-BUKRS.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR BUKRS-LOW.
PERFORM MYPOPULATE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR BUKRS-HIGH.
PERFORM MYPOPULATE.
FORM MYPOPULATE.
REFRESH ITAB.
SELECT * FROM T001 INTO TABLE ITAB.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'BUKRS'
dynprofield = 'BUKRS'
dynpprog = sy-REPID
dynpnr = sy-dynnr
multiple_choice = 'X'
value_org = 'S'
TABLES
value_tab = ITAB
return_tab = return.
IF RETURN[] IS NOT INITIAL.
REFRESH BUKRS.
CLEAR BUKRS.
LOOP AT RETURN.
BUKRS-SIGN = 'I'.
BUKRS-OPTION = 'EQ'.
BUKRS-LOW = RETURN-FIELDVAL.
BUKRS-HIGH = RETURN-FIELDVAL.
APPEND BUKRS.
ENDLOOP.
ENDIF.
ENDFORM.
regards,
amit m. -
Can i assign a collective srch help for select option in list display
can i assign a collective srch help for select option in list display
Hi,
Yes ,u can assign a collective search help for select-option in list display.
Eg:
Define your select option like this
SELECT-OPTIONS: s_vbeln FOR likp-vbeln MATCHCODE OBJECT vmva.
Regards,
Shiva. -
How to set default values in initialization event for select option
Abapers,
I have 3 GL account like 0024831231,0024831238,0024831245.
Please help me how to set default values in select-options ( s_hkont ) in INTIALIZATION event
ThanksSelect option is table <Structure> with fields, low, high, sign & option
you need to append the value into the select option, with appropriate value in low or
example:
S_HKONT-low = <value>
S_HKONT-SIGN = 'I'
S_hkont-OPTION = 'EQ'
append s_hkont.
Default value for select-option also can be added directly in select-option statement.
Regards,
Mahesh -
Input Negative values in selection screen for select-options field
I am not able enter negative values for
SELECT-OPTIONS V_ERFMG FOR MSEG-ERFMG.
It says negative values are not allowed but I need to check for negative values. Kindly provide me solution.You can't put the negative values here...because the Domain which is attached to MSEG-ERFMG has not the "Sign" checkbox on.
Try with this code:
tables:wbrp.
SELECT-OPTIONS V_ERFMG FOR WBRP-menge.
Regards,
Naimesh Patel -
How to get calender in f4 help for select options in module pool (URGENT)
Hi All,
how to get calender in f4 help for select options in module pool
Please help .
Thanx in advance,
amrutaHi Amruta,
First of all, you can not create select-options directly in module pool.
For creating <b>select-option is dialog prog</b> follow these steps:
1. create your selection screen model as subscreen by:
SELECTION-SCREEN BEGIN OF SCREEN 2000 AS SUBSCREEN.
PARAMETRS: P_MATNR LIKE MARA-MATNR.
SELECT-OPTIONS: S_BISMAT FOR MARA-BISMAT.
SELECTION-SCREEN END OF SCREEN 2000.
2. create a screen ( example 100 ) in your module-pool dedicated for selection-screen. on this screen layout sketch a sub-screen name like subscree_2000.
3. write this bit of code in PBO and PAI of the screen 100;
CALL SUBSCREEN SUBSCREEN_2000.
4. include this code in PBO:
INCLUDING SY-REPID '2000'
6. write user_command of PAI, call screen which is going to executable after selection-screen.
5. create a transcation for this dialog module pool with screen 100.
6. execute this transaction and you can see it's behaving like cool with select-options.
After that in [bprocee on value-request]</b>, use F4_DATE for both from and to option field.
Hope it will solve the problem.
Regards
Krishnendu -
How to assign search help using ovs for select options for ALV in web dynpr
how to assign search help using ovs for select options for ALV in web dynpro
Hi,
refer http://wiki.sdn.sap.com/wiki/display/WDABAP/InputhelpofObjectValueSelectioninWDABAP
http://www.****************/Tutorials/WebDynproABAP/OVS/page1.htm
and http://wiki.sdn.sap.com/wiki/display/Snippets/WebDynproAbap-OVSsearch+help
Thanks,
Chandra -
F4 help for select options based on parameter value
hi all,
I need a help to create an F4 help for select options for object id based on parameter value of object type, I mean once an object type is given the f4 help should contain object id's only of that type for each option.
Regard's,
Girija
Moderator Message : Duplicate post locked. Continue with [f4 help for select options based on parameter value |f4 help for select options based on parameter value;.
Edited by: Vinod Kumar on May 17, 2011 1:36 PMhi all,
I need a help to create an F4 help for select options for object id based on parameter value of object type, I mean once an object type is given the f4 help should contain object id's only of that type for each option.
Regard's,
Girija
Moderator Message : Duplicate post locked. Continue with [f4 help for select options based on parameter value |f4 help for select options based on parameter value;.
Edited by: Vinod Kumar on May 17, 2011 1:36 PM
Maybe you are looking for
-
Why am I no longer getting the student creative cloud rate?
Up to August of 2014 I was paying the student creative cloud rate of 19.99/month. When I renewed, I began getting charged 29.99/month and I am still a student. Why is this? And I know to some it's only 10.00 but that is a lot for me right now.
-
In case of co-pa extraction what is the system naming for infoobjects?
in normal case /BIC/ is the naming for system of bw, but in case of co-pa extraction ,same or any other different
-
HOW DO I RESTORE DELETED FILES FROM CREATIVE MEDIA ORGANIZER
I? stupidly deleted the wrong files from the organizer, lost nearly all my music !!? Is there anyway I can get them back ?I can't play anything on Windows Media either. I have all the music on my Zen Jukebox still but it did not transfer all tracks b
-
Missing apps after iOS 5update
Missing apps after upgrade to its 5 operating system. How to recover apps. Syncing does not do it.
-
AnyConnect clients randomly disconnect, reconnect
Hello, We have been using our current configuration for some time, but recently most of the AnyConnect clients randomly loose connection, then reconnect. I have had the ISP and SonicWall look to see if they find any issue, but they do not. I have che