Date profile can control the following document's creation?

when i create a quotation of contract ,i can see the vaild time in date profile.for eg.the vaild time is from 2009.2.1-2009.2.28.
then i create the contract according to the quotation on 2009.3.1.in my opinion,i think sap crm should give me a warning message.but i can not see it .
i wanna know how can i control it?
how to let the system will check the vaild time when the following document create?
my system is sap crm 5.0
plz help.....

Please ignore this issue - I have just realised that my signature fields on the IPAD are acutally missing instead - there is a separate discussion raised about this today with more detail.

Similar Messages

I need some people who can test the following for me - Wake on Ethernet Acc

Hey there,
i am sorry for crossposting but i need someone who can confirm something like a bug in 10.6.2 SL.
What you need:
Two Macs running 10.6.2 SL which are in the same Network.
The following settings need to be activated on both Macs:
1. System Preferences -> Energy Saver -> *Wake on Ethernet Access*
2. System Preferences -> Energy Saver -> Computer Sleep set to never
3. System Preferences -> Sharing -> Screensharing and File Sharing
What you need to do is simple. Start both Macs so that they see each other in their finder.
Now connect with one Mac to the other and wait a bit until you can see the folders of the distant Mac. As soon as those folders show up, click on the "Screensharing" Button on the upper right side of the finder. Enter your PW (if set up) and wait until you can control the other Mac. Now simply go to Apple -> Sleep on the Computer you just connected to via this screensharing session (by using this screensharing session and not the keyboard or mouse of this distant Mac). After this Mac went to sleep close the screensharing session.
Now you need to wait for 2 hours. You are not allowed to start or use the Mac you just set to sleep.(The other one which you used for connecting to the other Mac may be used just as normal).
Now here is the point where all of this gets "interesting". Because you enabled "Wake on Ethernet Access" the Mac you just set to sleep will wake up in about 2 hours to perform a sleep proxy announcement. Usually this Mac will wake up for 15 seconds without turning on the screen. After 15 seconds it should go back to sleep.
What i found out: As soon as you set your Mac to sleep by using a VNC Tool like this Screensharing App (i.e. because you are not in the same room/city/country as the other mac and you cannot put it to sleep manually with the attached keyboard) the Mac will wake up but will NOT go to sleep again. This makes the whole Back to my Mac and Wake on Demand feature useless as it was designed to safe power and not to start a Mac (that was set to sleep by Screensharing) after 2 hours without automatically put it back to sleep.
I need some proof that i am not the only one with this problem so i would really appreciate your help in this.. it will cost you 2 hours where you cannot use your second mac but it might be really useful to me if you have the same issues.
What i already did while troubleshooting:
-Reinstall the Firmware of my Cable Modem and Router
- Restart every of my 3 Macs which behave like this
- Reset PMU, SMC, NVRAM, PRAM and everything that is possible on every Mac
- Reinstall the OS (only thing i installed were the updates to 10.6.2) on every Mac. Same issue on a clean fresh install.
Thank you and happy new year from germany everybody
greetings
André

*Important notice for Macbook/Macbook Pro/Macbook Air Users:*
The "Wake on Ethernet Access" Option is only working when the Mac you just set to sleep via Screensharing is *connected to your power supply* *and its lid is NOT closed.* Please consider this in your testing.
Thank you!

Configuring using AAEI have been going through the following document. http

I have been going through the following document.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/700058f0-b1a1-2a10-39a8-ab2627b87cfa?quicklink=index&overridelayout=true
1. I have a JMS to Proxy scenario async. How do I make this scenario configured using Integrated configuration in 7.11 using AAE to improve the performance of this scenario?
I know it is not supported by Proxies?
Plz let me know the steps required for the same?
2. I have a file to Proxy scenario - Async. Can I configure the same using integrated configuration scenario?
Thanks
~N

Hi
Please check the following links for AAE with proxy
ABAP Proxy sender possible in integrated configuration AAE with PI 7.11
/people/makoto.sugishita/blog/2009/10/23/a-new-feature-in-netweaver-pimessage-protocol-xi-30-in-soap-adapter
Regards
Abhijit

How to find credit data exchange rate at the billing document

Hi Gurus,
I have a question about Creidt data exchange rate, I created sales order and when I tried to generate the invoice, it was split into 2 billing document and the reason in split analysis is "Credit data exchange rate at billing document", I want to ask where can I find the credit data exchange rate at the billing document?
And where can I find that this is one of the criteria to trigger the billing split?
Thanks for your great help in advance.
Edited by: Lakshmipathi on May 25, 2011 8:57 PM
Please dont post the same question in multiple forums which is not allowed

Hello, this field is for the exchange rate between local currency & local currency 2, there must be someplace to set up it, do you know where is that place?
As now the invoice split show the data with the exchange rate which is weird. And i don't know how to fix it so that the invoice will not be split anymore..
Thanks for your great help!

Looking for a Bluetooth headset that can control the iPhone's volume

Hey guys,
I'm looking to buy a cheap bluetooth headset that can control the iPhone's volume. The reason why I'm looking for that is because I want to take remote pictures. I currently have the Motorola H350 and it does have volume buttons except they control the headset's volume, not the iPhone's.
I was wondering if you guys could help me.
Thank you.

Like ur self, I'm also looking for a bluetooth that can trigger the cam on iphone 4s, mainly for moment when I'm all alone for a picture.
Have tried the following earphone without success, all purchase through Apple Store, guess will have to source somewhere else.
1. Jawbone ERA - failed
2. Bose BLuetooth Headset series II - failed

Whether the NI step controller can control the digital servo driver and motor

I want to you can help me confirm whether the NI step controller can control the digital servo driver and motor.If can,what is the differents between servo controller and step controller to control servo motor?Thank you so much!
Best regards

The PCI/PXI/FW 7344 high precision controller can be used to control both steppers and servo motors. The older PC Step controllers are made for stepper only control. The difference in the two control types is with stepper control, the controller outputs two digital signals that control the step and direction of the motor. The drive uses these digital signals to energize the stepper phases and commutate the motor. In a servo system, the controller outputs a -10 to 10 Volt analog signal that the drive then uses to output the appropriate current to the motor which is proportional to torque.
You can get more information from the following website:
http://zone.ni.com/devzone/devzone.nsf/webcategories/69771825AE23E98E86256786000BEA02?opendocument
Please let u
s know if you have any further questions.
Regards,
Andy Bell
Applications Engineer
National Instruments

GR/IR clears the following documents

Hi Guys,
What do we mean by
GR/IR Clears the following Documents
GL Document
Customer Documents
Vendor Documents .
GR/IR is a clearing account but how does it clear the above documents.
thanks in advance..
srikanth

hi srikanth,
GR means Goods reacived but u did not received the invoice.
IR means u received the incoice
At these two cetivation no accouts will be clear
but Inventory A.C ,GR IR A.c,Vendor master Records will be update.
When the Payment will u do then only That A.C's will be clear

Error - No date profile assigned to the transaction/item category

Dear Expterts,
I am getting the error while trying to create a complaint (In-house repair) transaction.
No date profile assigned to the transaction/item category
Message no. CRM_BILLING015
System Response
Billing dates cannot be maintained.
Procedure
Assign a date profile to the transaction type or item category in Customizing.
Make sure that this date profile contains all the necessary date types:
BILL_DATE
INVCR_DATE
date profiles are assigned to both transaction type and Item category. mentioned date rules are in place in standard configuration itself. still the problem persist.
Please help me to resolve the issue. Your help will be highly appreciated.
Best regards
Raghu ram

Hi Pepe,
Thanks for the response, these transaction types are already there. and 'Today' date rules are assigned to both date types.
Still the problem exist.
Best regards,
Raghu ram

My buttons on my nano arent working but i can control the volume and center

my buttons on my nano arent working but i can control the volume and center buttons and idk y its acting up

Try Restoring it in iTunes. If that does not work you will probably need to get it serviced.

Is there a way I can control the resolution of the photos I transfer to the iPad?

Is there a way I can control the resolution of the photos I transfer to the New iPad? I just received the new iPad and would like to reduce the size of the resolution of the pictures I am transferring.
I have storage capacity issue and I am only able to transfer about half the number of pictures I had on original Ipad with the same storage capacity. I upgraded to the New Ipad and I am transferring all the pictures I had in the original Ipad. I do not know why they are not all transfering since the New Ipad got full before all the pictutres where transfered. I used Itunes to transfer the pictures I have in Iphoto . I assume this is because the New Ipad has a higher resolution screen and is allowing the pictures to be transfered automatically to the New Ipad at a higher resolution than the original Ipad?
Any thoughts?
Ed

edgodoy wrote:
However, is there a way I can increase the number of pictures I can transfer to the New Ipad using Itunes?
I have a Canon 7D and the picture are large.
Step my step instructions, would be great if it is at all possible.
What you as is difficult without knowing your exact circumstances, i.e. what format pictures are you sending, do you shoot in .jpg or shoot in RAW and convert to .jpg, etc. However, I don't see a way to quickly reduce the size of your image files without reprocessing your files in some manner.
You could export all of the images to be loaded onto your iPad in JPEG format using Lightroom or Aperture and greatly lower the quality setting in the .jpg export. If you do this make sure you export to a new folder. Lowering the quality can have a huge impact on the size of the image files. If this worked it would give you the advantage of still having the largest amount of pixels allowable on the iPad 3. I found that on my iPad 2 I could 'get away' with setting the quality to around 50 without seeing any obvious changes. A higher quality setting may or may not be required on the iPad 3, time will tell and as my iPad 3 is going back I've not taken the time to put more than a few sample (800 or so) images on it. They were exported at a quality setting of 60 and look as well as can be expected considering my defective iPad 3 display.
If you images are already exported at a lower quality setting and are still too large the next step would be to reduce the dimensions of the image. Lightroom has this capability. I don't know about Aperture, but I assume it does.
My normal workflow with my 7D:
Take picture in RAW.
Transfer to Lightroom 4 converting the Canon RAW files to Adobe's DNG format.
Process images in Lightroom. If any need further processing then export to Photoshop and/or Nik plug-ins.
Export processed images that I wish to have on my iPad to my Pictures folder in .jpg format using a quality setting of 60. I do not reduce the dimension of the image as I want the maximum sized images my iPad will allow. As I only transfer a couple of thousand size is not an issue.
Use iTunes to Sync photos to iPad.
As was mentioned by a previous poster you could use Photoshop to bulk process the photos but that requires both Photoshop and a knowledge of creating a bulk action. Not hard, but very confusing if you haven't used both Photoshop and the bulk process before.
There may be other methods that could work for you but I am not aware of them. With the breadth of experience of the members of this forum perhaps someone else could chime in with suggestions.

In capture, i can control the dvd camera, but i can't see the image,...

in capture, i can control the dvd camera, but i can't see the image, it says "preview disabled."
Philippe

Hi,
I posted the same issue.
I upgraded FCE 3 to FCE 3.5 on Mac 10.4.6
At first I had nothing: every attempt at capturing resulted in shutting down of FCE.
After upgrading to QT 7.1.1 I now have device control but the capture proces is aborted as there seems to be "no video" (miniDV deck)
Everything is normal with iMovie 6
Frank

Is there an app that can control the ringer volume by the time of day?

Is there an app that can control the ringer volume by the time of day. Like say i had work. Is there an app that can automaticly change the ringer volume on certain days at times you input to lower the ringer volume?

Can a app like this be made or will apple not allow it?

No DME could be generated for the following documents

Dear Consultants,
Transaction code F110. DME file is generated for all vendors except 2 vendors. Invoices got cleared.
One vendor is from Austria and other is UK.
No DME could be generated for the following documents
Error:
Supplying country's country key is missing or is not valid
SCB indicator is missing or is not valid.
Could you please let me know where do these setting to be made.
Thanks & Regards,
SK

Dear Friends,
I have solved my issue myself and thought of sharing with you. In field status group - foreign Payment there is a field SCB/Country Key.
It was suppressed earlier. I made this as optional. When we are postings invoices, once the fileds are filled in . DME file generated.
Regards,
SK

Runtime error while saving the billing document after creation

hi friends ,
while saving the billing document after creation , the fallowing discriptive runtime error has come.
Run time errors -
SAPSQL_INVALID_TABLENAME
Except. -
CX_SY_DYNAMIC_OSQL_SEMANTICS

Dear Unnam,
There may be several reasons...
1. If u have enhanced the tcode with some z tables,and that might not be moved properly to prod or not active in data dictonary.
2. u may not be entering proper data to the input fields.
3. please check if u have added any z tables to the std tcode.I am exepcting this prob.u may not moved the table or enhancement properly to prod server,
Please check it...
Thanks N Regards
SettyKY

How to Find out the from which table we can get the following fields?

The following fields are from invoice data
How to know or from which table we get the following fields:
Header Details:
Manifest:, Finance Control #:, Alternate SID:, Carrier:, Container/Trailer #:, Hazmat Code:, Harmonizing Code, Freight Forwarder, Fiscal Rep., Ship From, Notify Party
Item Details:
VAT/Tax Rate %, VAT/Tax Amount, Measurements, Net Weight, Gross Weight
thanks

Dear Krishnama
Place your mouse on the required fields and press F1. A box with header Performance Assistant will appear in front of you where you select "Technical information" (icon like hammer and spanner).
You can now see what table it is.
thanks
G. Lakshmipathi

Date profile can control the following document's creation?

Similar Messages

Maybe you are looking for