Date profile issue.

Hi,
Need your help on date profile. I had created one new duration and a new rule.
After that created the date profile and assigned this new date rule.
After that I had assigned the date profile to transaction type.
But while creating a document, system is not calculating the new date.
Will you please suggest? Or help me with any config doc for date profile.
Regards,
P. San

HI
You need to assign Date Profile to transaction types in customizing(txn:SPRO>IMG>Customer Relationship Management>Basic Functions>Date Management)
Date profile in turn contians Date Type,Duration ,Date rules and Reference Object.To know more about these,refer the below link:
http://help.sap.com/saphelp_crm60/helpdata/en/d9/fce93a29768802e10000000a11402f/frameset.htm.
Also,you can go through the documents present in the SPRO path mentioned above.
Hope this will help
Regards

Similar Messages

Issue with date profile

Dear All,
I have one issue related to date profile which is like this,i have created a date profile and i have assigned this date profile to both Tansaction type & Item category of TA(standard order).
But the assigned date profile(date rules) is not seen in the header tab of TA transaction when i tried to create it.
please advice..
I need to resolve this asap.
Points will be rewarded.
Thanks in advance./.....
Cheers
Shashidhar
Edited by: shashidhar prahaladh on Mar 12, 2008 5:29 AM

Hi Sashi,
Just a suggestion,as you have assigned to both transaction types and item category, so may be after entering the item in the transaction, you might be able to see the dates at header.
Please read below which is source from SAP Help.
For every transaction at the header and/ or item level, you can define which date type you need for the transaction, that is, which item type you need. By doing this, you avoid saving unnecessary date types on the database. The same applies for durations (for example, contract run time).
To assign dates and durations to an item category, you group the desired date types and durations together in a date profile and assign this to a transaction type or an item type.
Link as http://help.sap.com/saphelp_crm50/helpdata/en/d4/fce93a29768802e10000000a11402f/frameset.htm
If useful please reward points
Thanks
Srini

I am going to get a replacement for my iphone 5C, for data connection issues. Can I get an 5S, instead of antother 5C as a replacement?

Hello, I have been having issues with my iPhone 5C for about a month now. I have unlimited everything, including data, & so randomly, starting about 2 weeks ago, my data basically does not work for any apps, besides like iMessage & Safari. So like if I have full LTE signal, I can try to open the Instagram app, and it will tell me "no internet connection", & it tells me that with ANY app, besides iMessage & Safari. Which is super frustrating, especially when I try to use like Maps or something & it jut does not load, & tells me that "there is not an internet connection", so I have to use apps & stuff only on wifi, in order for them to work. I went to the Sprint store, and had them try and update the data profile, reset data network, soft reset, etc (they basically did everything that I did), & they could NOT figure out what was wrong with my phone. So, they looked into my warranty information, and told me to take my phone to the Apple Store, and just get a replacement & that it would cost me only $50, since it is still covered under warranty. I am not up for an upgrade until April of 2016, & as far as I know, when it comes to replacements, Apple will either give me a new/refurbished iPhone 5C as a replacement. I don't really mind having to pay a little extra if I have to, in order to get a 5S , & I also don't care if the 5S would be either new or refurbished. So, my question is, could I maybe get a 5S as a replacement, instead of another 5C?
Green iPhone 5C 8GB Sprint
Message was edited by: jalyn_taylor
Message was edited by: jalyn_taylor

No.
As provided, you will get the exact same model, storage, color, etc

Date profiles missing from IC-WebClient?

Hello experts,
We are working on CRM 5.0 SP 7, IC WebClient and have implemented the BADI ORDER_SAVE to calculate planned dates(defined in Date Profile) for Service tickets.
We are getting all dates perfectly for tickets created in IC-WebClient.
But the issue is that when we are creating tickets(Service order) in PCUI and checking it in WebClient for further processing, all date profiles are missing i.e. Date Profile frame goes completely blank.
We are getting values in different date types perfectly in PCUI as BADI is working fine but we are not able to see same date details in IC WebClient.
Award points assured for helpful answers
Regards,
Amit
Message was edited by:
Amit Kumar

Hi All,
The issue has been resolved by giving dummy product ID to service order.But that is done manually . I would like to know: Is there any <b>BADI or any way</b> that can be used to assign default product ID (INVESTIGATION) for service order as it is done in case of service tickets.
Regards,
Amit

I want to create org data profile in service scenario, with price determination from sales org, distribution centre , can any one help me with these

i want to create org data profile in service scenario, with price determination from sales org, distribution centre , can any one help me with these
IF I CREATE SERVICE ORG WITH SERVICE SCENARIO ORG DATA PROFILE,
MY PRICING IS NOT GETTING DETERMINED AS IT IS LINKED TO SALES ORG AND DISTRIBUTION CHANNEL THROUGH PRICING DETERMINATION SO HOW TO DO THE CUSTOMIZATION FOR THIS SITUATION
WITH REGARDS,
SATHISH

Hi Satish,
Please assign the org det. rules to org det. profile with Sales and Service scenarios and then assign the org. det. profile to transaction type. The below screenshot is just for your reference.
Hope it would fix your issue.
Regards,

Date profile can control the following document's creation?

when i create a quotation of contract ,i can see the vaild time in date profile.for eg.the vaild time is from 2009.2.1-2009.2.28.
then i create the contract according to the quotation on 2009.3.1.in my opinion,i think sap crm should give me a warning message.but i can not see it .
i wanna know how can i control it?
how to let the system will check the vaild time when the following document create?
my system is sap crm 5.0
plz help.....

Please ignore this issue - I have just realised that my signature fields on the IPAD are acutally missing instead - there is a separate discussion raised about this today with more detail.

Error ORA-14400 generated Data Profile

Hello People,
When I generated data profile with 5 tables:
Profile_1224766956846
INFORMATIONAL
Data profiling operations complete.
Profile_1224766956846
Error
ORA-14400: inserted partition key does not map to any partition
ORA-06512: at "OWBREP.WB_RT_PROFILE_SERVICE", line 1113
ORA-06512: at "OWBREP.WB_RT_PROFILE_SERVICE", line 1199
ORA-06512: at line 1
Profile_1224766956846
INFORMATIONAL
Referential analysis for objects.
Profile_1224766956846
INFORMATIONAL
Referential analysis initialization complete in 53.978 s.
Profile_1224766956846
INFORMATIONAL
Referential analysis initialization.
Profile_1224766956846
INFORMATIONAL
Data rule analysis for object CONTRATO complete in 0.253 s.
Profile_1224766956846
INFORMATIONAL
Data rule analysis for object CONTRATO
Profile_1224766956846
INFORMATIONAL
Functional dependency and unique key discovery for object CONTRATO complete in 2.279 s.
Profile_1224766956846
INFORMATIONAL
Functional dependency and unique key discovery for object CONTRATO
Profile_1224766956846
INFORMATIONAL
Domain analysis for object CONTRATO complete in 0.208 s.
Profile_1224766956846
INFORMATIONAL
Domain analysis for object CONTRATO
Profile_1224766956846
INFORMATIONAL
Aggregation and Data Type analysis for object CONTRATO complete in 47.028 s.
Profile_1224766956846
INFORMATIONAL
Aggregation and Data Type analysis for object CONTRATO
Profile_1224766956846
INFORMATIONAL
Data rule analysis for object IMPUESTO complete in 0.007 s.
Profile_1224766956846
INFORMATIONAL
Data rule analysis for object IMPUESTO
Profile_1224766956846
INFORMATIONAL
Data rule analysis for object CUENTA complete in 0.746 s.
Profile_1224766956846
INFORMATIONAL
Data rule analysis for object CUENTA
Profile_1224766956846
INFORMATIONAL
Execute data prepare map for object CONTRATO complete in 1.747 s.
Profile_1224766956846
INFORMATIONAL
Execute data prepare map for object CONTRATO
  O59DC772DA581112EE044001A_MAP_ProfileLoader
Success
It only happens when I try to do a foreing key between CONTRATO -> CUENTA. I have chosen data type discovery, common format discovery, copy data in workspace, pattern discovery, domain discovery, unique key discovery, functional dependency, relationship discovery and data rule profiling in the property inspector.
Sometimes I am able to profile without any error, but sometimes I cannot. I am not able to identify the steps when the profiling works correctly.
I am using 10g R2 database and OWB repository 10.2.0.4
Thanks for your help!

ORA-14400:     inserted partition key does not map to any partition
Cause:     An attempt was made to insert a record into, a Range or Composite Range object, with a concatenated partition key that is beyond the concatenated partition bound list of the last partition -OR- An attempt was made to insert a record into a List object with a partition key that did not match the literal values specified for any of the partitions.
Action:     Do not insert the key. Or, add a partition capable of accepting the key, Or add values matching the key to a partition specification
Having a partition is not the issue. The table should have a partition with a high value (on the partition key) which is higher than the value you are trying to insert.
If you are partitioning by date and the last partition has a high value of 01-aug-2008 you will get this error if one of the rows you are inserting has the date 02-aug-2008.
also you might want to check:
[http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1392403659992]
Edited by: Darthvader-647181 on Oct 23, 2008 7:41 AM

Error - No date profile assigned to the transaction/item category

Dear Expterts,
I am getting the error while trying to create a complaint (In-house repair) transaction.
No date profile assigned to the transaction/item category
Message no. CRM_BILLING015
System Response
Billing dates cannot be maintained.
Procedure
Assign a date profile to the transaction type or item category in Customizing.
Make sure that this date profile contains all the necessary date types:
BILL_DATE
INVCR_DATE
date profiles are assigned to both transaction type and Item category. mentioned date rules are in place in standard configuration itself. still the problem persist.
Please help me to resolve the issue. Your help will be highly appreciated.
Best regards
Raghu ram

Hi Pepe,
Thanks for the response, these transaction types are already there. and 'Today' date rules are assigned to both date types.
Still the problem exist.
Best regards,
Raghu ram

How do I work with FK in a data profile?

Hello People:
I am new in OWB tools and I have many doubts. Therefore, I would like to know if anyone can guide me a bit with the theme of FK and profiles.
How do I work with FK in a data profile?
If I have a table that has a FK to most of the tables, because it is like a parent table. What should I do to have that FK in the profile?
e.g.
- Table 1 FK Table 2
- Table 1 FK Table 3
- Table 1 FK Table 4
- Table 1 FK Table 5
- Table 1 FK Table 6
- Table 2 FK Table 7
- Table 2 FK Table 8
- Table 8 FK Table 9
You should have a data profile with each table or a data profile for all related tables?
If I am all in a single profile, that it would have no problem but I would only slow every time that I have to add a new table, but if I got separated, I can not use the FK? What is the solution that will give this problem?
e.g. PROFILE GENERAL
- Table 1
- Table 2
- Table 3
- Table 4
- Table 5
- Table 6
- Table 7
- Table 8
- Table 9
OR
PROFILE 1 -> - Table 1
PROFILE 2 -> - Table 2
PROFILE 3 -> - Table 3
PROFILE 4 -> - Table 4
PROFILE 5 -> - Table 5
PROFILE 6 -> - Table 6
PROFILE 7 -> - Table 7
PROFILE 8 -> - Table 8
PROFILE 9 -> - Table 9
OR
PROFILE R -> Table 1 / Table 2
PROFILE S -> Table 1 / Table 3
PROFILE T -> Table 1 / Table 4
PROFILE U -> Table 1 / Table 5
PROFILE V -> Table 1 / Table 6
PROFILE W -> Table 2 / Table 7
PROFILE X -> Table 2 / Table 8
PROFILE Z -> Table 8 / Table 9
Thank you very much for your help!
Best regard!

Any idea, please?

Data integrator for HP-UX missing data quality and data profiling

Hi All,
I have installed ODI 10.1.3.40.0 from odi_unix_generic_10.1.3.4.0.zip in HP unix 11.23.
Data quality and data profiling is missing in that zip ? Could anyone please help me how to get installer of data quality and data profiling for Oracle data integrator in HP UX 11.23.
Any response will be highly appreciated.
Thanks in advance.
regards
Umapada
Edited by: user10612738 on Nov 28, 2008 1:54 AM

The integrated packaged( ODi, data quality and data profiling) for HP-UX wount available till 10.1.3.5.0 which will be released by this year end.

ODI Data Profiling and Data Quality

Hi experts,
Searching about ODI features for data profiling and data quality I found (I think) many ... extensions? for the product, that confuse me. Cause I think there are at least three diferents ways to do data profiling and data quality:
In first place, I found that ODI has out of the box features for data profiling and data quality, but, acording to the paper, this features are too limited.
The second way I found was the product Oracle Data Profiling and Oracle Data Quality for Oracle Data Integrator 11gR1 (11.1.1.3.0) that is in the download page of ODI. Acording to the page, this product extends the existing inline Data Quality and Data profiling features of ODI.
Finally, the third way is Oracle Enterprise Data Quality that is another product that can be integrated to ODI.
I dont know if I understood good my alternatives. But, in fact, I need a general explanation of what ODI offer to do Data Quality and Data profiling. Can you help me to understand this?
Very thanks in advance.

Hi after 11.1.1.3 version of ODI release, oracle no longer supports ODP/ODQ which is a trillium software product and this not owned by oracle. Oracle is recommending the usage OEDQ for quality purposes. It's better if you could spend time on OEDQ rather than trying to learn and implement ODP/ODQ in ODI

Oracle Data Profiling and Data Quality

Hi,
How to create metabase for Oracle Data Profiling and Data Quality.Is metabase and repository are same.

Hi,
You can create a metabase in the Metabase Manager:
- Expand Control Admin
- Click on Metabases
- in the Metabases window, right-click on the white area and select Add...
- go through the wizard to create your metabase
This is documented in the ODQ/ODP tutorial (http://www.oracle.com/technology/products/oracle-data-quality/pdf/oracledq_tutorial.pdf) and in the Documentation (in Metabase Manager or Oracle Data Quality go to Help and then Manuals).
Thanks,
Julien

Can I filter the table being profiled in the Data Profiling task, or know of a work around? SSIS2008r2

Hi,
I import several files into a staging table. Inside a foreach loop, after the data flow task I have a Data Profiling task that profiles the table so we can give feedback to those who sent us the file.
I just relalized that after the first loop, there is more than one file in the staging table, hence more than one file is being profiled.
At first glance it doesnt appear I can add a "Where" clause to the table. I do have a column that states which file the data came from, but with only being able to profile a view or table, I can't filter.
Anyone have any ideas?
Mike

Catching outliers seeing how much of what kind of data exist, deviations, distribution, you get some sort of a historgram in essence with the Data Profiling.
It is normally a preamble to doing data ingress (or egress) into a new target.
Now patterns are in Fuzzy Lookups/matching or grouping. Having RegEx used is hard in SSIS! I admit, I proposed to have it included into SSIS VNext. I remember there was a component or two on CodePlex:
http://ssisctc.codeplex.com/ see if any makes sense, I recall I tried one just out for fun.
Arthur My Blog

Unable to assign the date profile to transaction tyep

Hi,
I have created a new date profile. but while assigning it the transaction its giving error like " The action profile is only allowed with date profile " X00001 " .
Please suggest what could be the reason for that .
Thanks & Regardsm
Rahul D

Hi Rahul,
U can follow below steps:
Spro->Customer Relationship Management->Basic Functions->Actions->Actions in Transaction->Change Actions and Conditions->Define Action Profiles and Actions.
1) Click on edit mode and Open u r action Profile.
2) See the field Date profile it will allow u to change the Date Profile (use F4)
also check whether u r old date profile is used in action conditions it also need to be change.
Hope it'll solve u r problem.
Regards,
Dipesh.

Windows 8.1 Data reordering issue with Intel Adaptors

According to Intel, there is a data reordering issue with their adaptors and probably this dumb WIDI software. This is from Intel site. they say some are fixed, "A future Windows 8 fix will address this issue for other Intel wireless adapters." I
have one Nope, still broke. I get drops all the time. Brand new Toshiba laptop I7 16 gigs of ram and a SSD and a 2 gig Vid card. Would be nice to be able to play games but I get dropped all the time. Now would Microsoft quit hiding
about this, and fix the darn thing. Also i'm a system admin for 13 years. I have build over 1000 PCs and servers. I know bad software. Please fix this. PLEASE. Its not going to just go away and its not just Toshiba, I have seen other companies with the
same problem. If there is a Fix PLEASE POST IT. Or even a workaround I have tried everything.
http://www.intel.com/support/wireless/wlan/sb/CS-034535.htm

Hi,
Have your first tried the software fix under this link for your network adapter?
http://www.intel.com/support/wireless/wtech/proset-ws/sb/CS-034041.htm
Please Note: The third-party product discussed here is manufactured by a company that is independent of Microsoft. We make no warranty, implied or otherwise, regarding this product's performance or reliability.
Also, you can try to check if there is any driver update under Device manager from manufacture's website.
Kate Li
TechNet Community Support
Yep didn't work. Still get drops all the time, had to run a Cat 5E cable to my laptop from my modem, because I have Atheros Gigabyte Lan adaptor. Works Great. The Wireless still drops all the time. Has Microsoft let out the patch to fix this or is it coming in
April in the 8.1 patch that's coming. Funny thing is all for Widi, I don't even use widi, I got the software to do that from Samsung works better on my TV. Intel and Microsoft need to get this fixed. because their driving off gamers and that's the
people that make sure they buy Microsoft so they can play games. With the wireless link dead and a great laptop worthless what's the point. Ive been in IT for 13 years building PCs and Servers how I knew how to run a 60 FT Cat 5e line thru
a 2 story house and terminate it. Most people don't. Fix the problem.

Date profile issue.

Similar Messages

Maybe you are looking for