Date Prompt (for summary by date report)

hi there,
i just created this report to view the distribution of stocks by range of dates. I created 2 parameter fields start and end date and threw them in the report. But now i am stuck as when i upload the report with salesforce.com online i dont get a prompt to select the dates.
any solution for this? thanks guys.
Ankur

Make sure the "Save data with report" option is turned off and then upload the report to crystalreports.com and it should prompt for the parameters as soon as you open the report. Otherwise, it just loads the report with the saved data and no prompt. Hopefully not too late to be useful.

Similar Messages

Selecting multiple values in a prompt for a BI Publisher report

Hi,
I selected multiple values in a prompt for a BI Publisher report and ran the report. The report run fine with single value. But it run to error with mutiliple value. The Oracle Business Intelligence Publisher version is release 11g (11.1.1).
Thanks in advance
Susan

Thanks for your replies !
Is there any other way to achieve this ?
There is 1 InfoObject which has 2 fields Employee and Department.
Employee     Department
001                A
001                B
001                C
In the report there should be 1 row for Employee 001 with all the Departments displayed in the same cell separated by commas.
Can this be done in the backend through a ABAP code?

Labview How to specify 1d array of clusters as data types for variant to data

Hi, I'm new to labview. Can anyone tell me how to specify 1d array of clusters as data types for variant to data?

First of all, you should be sure that there is such a data type within the variant; otherwise, you will run into errors.
I recommend you to create the cluster and create a type definition from it. Then drop an array shell from the array palette and drop the cluster type into that array.
Connect that constant to the data type input of the Variant To Data function.
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Can anyone confirm the date used for pushing the data into AR interface table? Is it abse don Actual ship date or scheduled ship date?

Can anyone confirm the date used for pushing the data into AR interface table? Is it abse don Actual ship date or scheduled ship date? We are facing a scenario where trx date is lower than the actual ship to which logically sounds incorrect.
Appreciate any quick response around this.

Hi,
Transaction date will be your autoinvoice master program submission level date (If you haven't setup any logic.
Please check the program level default date, if user enter old date ststem will pick the same.
Customer is trying to set the value of the profile OM:Set receivables transaction date as current date for non-shippable lines at the responsiblity level. System does not set the transaction date to current date in ra_interface_lines_all.
CAUSE
Customer has used the functionality in R11i. But after the upgrade to R12, the system functions differently than R11i.
SOLUTION
1.Ensure that there are no scheduled workflow background process run.
2.Set the profile "OM: Set Receivables Transaction Date as Current Date for Non-Shippable Lines" at Responsibility level only as Yes.
3.Now switch the responsibility to which the profile is set.
4.Create order for Non-Shippable Lines and progress it to invoicing.
5.Ensure that the 'workflow background process' concurrent program is run in the same responsibility and this line is considered in it.
6.Now check if the 'SHIP_DATE_ACTUAL' is populated to ra_interface_lines_all

Need help in creating prompt for Month To Date Report.

Hi All I need to create a Month To Date Report using month(Start date & End date) as prompts, By default it has to run on the previous month data or if user selects his own range of dates then it has to bring the data for that range of dates ,one more thing is i am not showing the month and date columns on the report.Can any one help me how to create prompt for this in DeskI XIR2

Could you clarify some things? You are saying you are trying to transform the xml output of a webservice with an xsd, but an xsd is a schema that describes the allowed format of a xml file. If you want to transform xml from one format to an other (from one xsd to an other) you have to use a xsl file. You can make and test this with JDeveloper. Are you calling the webservice from esb or bpel?
Kind Regards,
Andre

Date prompt for Answers report.

Hi,
I created a report in Answers. I created a prompt on a date field which shows when the Account was closed. I foramtted the date field into a custom date format and the results also display in that format. for ex: the format I created was DD-MMM-YY. When I create a prompt for this field the drop down values show as 4/24/2008 12:00:00 AM, But I want the drop down for the prompt to be displayed as the same format as the column i.e DD-MMM-YY. This is for just a regular report prompt (column filter prompt) and not any dashboard prompt. How can I acheive this? Thanks.

hi,
But the prompt displays DD/MM/YYYY. How can I make the prompt also display DD-MMM-YY? Also if I create a dashboard then how do I use the same prompt with DD-MM-YY formatIn both the report and prompt fx use the following syntax and make is prompted on report column "fx"
EVALUATE('TO_CHAR(%1,%2)' AS CHARACTER ( 30 ),Dim-Date.REPORT_DATE, 'DD-MON-YY')
Thanks,
Saichand.v

How to handle Multiple date formats for the same date field in SQL*Loader

Dear All,
I got a requirement where I need to get data from a text file and insert the same into oracle table.
I am using SQL*Loader to populate the data from the text file into my table.
The file has one field where I am expecting date date data in multiple formats, like dd/mon/yyyy, yyyy/dd/mon, yyyy/mon/dd, ,mm/dd/yyyy, mon/dd/yyyy.
While using SQL*Loader, I can see Loading is failing for records where we have formats like yyyy/dd/mon, yyyy/mon/dd, mon/dd/yyyy.
Is there any way in SQL*Loader where we can mention all these date formats so that this date data should go smoothly into the underlying date column in the table.
Appreciate your response on this.
Thanks,
Madhu K.

The point being made was, are you sure that you can uniquely identify a date format from the value you receieve? Are you sure that the data stored is only of a particular limited set of formats?
e.g. if you had a value of '07/08/03' how do you know what format that is?
It could be...
7th August 2003 (thus assuming it's DD/MM/RR format)
or
8th July 2003 (thus assuming it's MM/DD/RR format)
or
3rd August 2007 (thus assuming it's RR/MM/DD format)
or
8th March 2007 (thus assuming it's RR/DD/MM format)
or even more obscurely...
3rd July 2008 (MM/RR/DD)
or
7th March 2008 (DD/RR/MM)
Do you have any information to tell you what formats are valid that would allow you to be specific and know what date format is meant?
This is a classic example of why dates should be stored on the database using DATE datatype and not VARCHAR2. It can lead to corruption of data, especially if the date can be entered in any format a user wishes.

Data Sources for the Master data of FI-CO,MM and SD from R3

Hi Gurus ,
Could you please tell me what are the main datasources of FI-CO,MM and SD needed from R/3 for the master data to be loaded in new implementation of BI .
Could you please guide me step by step .
thanks in advance ,
Pratham

Hi
It varies from Client and project. But the Most common SD & MM are from LO **** pit.
help.sap.com is the best source for this
Hope it helps

Not getting proper date values for original GI Date

Hi,
I have to Calculate Original GI Date based on Original promise Date and transport Date(Original GI Date = Original promise Date-transport Date) and I am getting Original Promise date as"21112008" and transport date as"20112008". when I subtract in Update rules as formula as (Original promise Date-transport Date) getting Original GI DATE as"01000001" as it is giving wrong date values.please help me whether i am going right way or is there any thing else i have to select in Update rule level (formula) to get proper date values or how can i approach to get original GI date.
it is QUITE Urgent...please help any one to solve the Issue.
REGARDS
VENKAT.

Hi Venkatesh,
Please search SDN forum before you post any questions. There are lots of threads available for this scenarios.
Use formula variables in Bex in order to achieve your requirement.
Links below, may be helpful:
Formula variable with replacement path on system date
How to creae days count variable in SAP BI-BEx
http://help.sap.com/saphelp_nw70/helpdata/en/f1/0a56a7e09411d2acb90000e829fbfe/frameset.htm
Regards,
Ravi Kanth.

Question - Best practice data source for Vs2008 and Crystal Reports 2008

I have posted a question here
CR2008 using data from .NET data provider (ADO.NET DATASET from a .DLL)
but think that perhaps I need general community advise on best practice with data sources.
In Crystal reports I can choose the data source location from any number of connection types, eg ado.net(xml), com, oledb, odbc.
Now in regard to the post, the reports have all been created in Crxi 6.3, upgraded to Crystal XI and now Im using the latest and greatest. I wrote the Crystal Reports 6.3/ XI reports back in the day to do the following: The Reports use a function from COM Object which returns an ADO recordset which is then consumed fine.
So I don't want to rewrite all these reports, of which there are many.
I would like to know if any developers are actually using .NET Class libraries to return ADO.NET datasets via the method call or if you are connecting directly to XML data via whatever source ( disk, web service, http request etc).
I have not been able to eliminate the problem listed in the post mentioned above, which is that the Crystal Report is calling the .NET class library method twice before displaying the data. I have confirmed this by debugging the class lib.
So any guidance or tips is appreciated.
Thanks

This is already being discuss in one of your other threads. Let's close this one out and concentrate on the one I've already replied to.
Thanks

Related Data Source for Customer Trial Balance Report

Hi Guys,
Can any one please let me know the related Datasource, DSO and Cube available to develop Customer Trial Balance report on BEx.
My required Row/Colum objects are
KPIs Calculated/restricted Formula/Logic Unit Authorisation
Total Calculated Sum of all the Quantity
invoiced invoices for a
Quantity FME
Proposed
Base Price Calculated Average price Amount
 for all invoices
 per FME
Average Eqv.
Base Price Calculated Average price Amount
 for all invoices
 per FME
Price
Difference Calculated Proposed Base Amount
 Price - Average
 Eqv. Base Price
The aggregation behavior of the individual KPI
Key Figure Aggregation Characteristic Time
 (Sum, Max, Last)
Net Debit Amount Sum All All
Net Credit Amount Sum All All
Total Debit Amount Sum All All
Total Credit Amount Sum All All
Characteristics
 Hierarchy Display Authorisation Selection Status/Mapping
Customer Number Yes KNA1-KUNNR
Customer Name
Business Area Yes PRCTR
Special GL Indicator Yes Company Code Yes BKPF-BUKRS
Industry Code KNA1-BRAN1
This is how my Functional Spec is..
Please let me know ASAP.
Thanks
Murali

hi,
You can use this report.
RFSLD00 Trial balance
For Further Reference use the link.
http://www.abapcode.info/2007/06/standard-sap-reports.html
Regards
Sumit AGarwal

Multi-select prompt for BI Publisher SQL report in Dashboard?

Is there any way to populate a presentation variable from a multi-select dashboard prompt?
I have a BIP report using a SQL data source, and it will be presented on an OBIEE dashboard. Since the only apparent method for prompting a SQL BIP report from a dashboard prompt is to use presentation variables, and it appears that you can only set presentation variables using non-multi-select controls, it looks like there's no way to do this.
Any ideas?

Thanks for the response Fabiano.
I tried using BI Answers to feed this report but it ended up being too cumbersome because of the number of queries and the awkward XML data names generated on calculated fields. Those were the main reasons for SQL data sources. I was able to cut the report from 10 queries down to 2, and assign meaningful XML data names. The report runs much faster and works very well. I am using bind variables, but the only way to populate them (apparently) is to use presentation varibles, which are not populated on a multi-select prompt.

Enabling data management for a coldfusion data service

Hello,
i have problem in calling a service withen a data service ,, that if i enable the data management i cant insert or update records , if i desable the data manabemt i can insert records but dont have result for get all or any get service all . it was working befor now no i completly remove the data service and created it again but the same problem even i deleted the valueobject and all the actionscript file related to that data service i have the same problem.
but
if i call the create record function ,, then i try to get the record i get the resutl from the database ?!!!
can someone help please

I saw the tutorial but that doesn't actually show how to configure for POST - it just uses GET and DELETE. When you configure for POST, you get prompted to "Specify an XSD that describes the structure of the request content". That implies that it is going to send the service an XML file as the attachment and wants to know the format of the XML file. The service that I want to use doesn't expect to receive an XML file, it expects form fields, and I think HTML forms send these like this:
p_zip_code=22209
p_selection=a
p_selection=b
p_selection=cOf course, the correct answer to my question may be "You can't get there from here" at least until 12c.
Ah ha! I see that some of what Frank mentioned is in the newly released 11.1.2.2, and didn't wait for 12c. I'll give that a try.
Edited by: jflack on May 11, 2012 2:58 PM

Data source for BSIS & BSAS data

Hi Experts,
Could you please let me know whcih data source will provide BSIS and BSAS tables data?
Thanks in advance.
Regards,
Raju

Hi,
BSIS is for open Item in Accounting document segment inFIGL
BSAS for closing in the same.
for this data comes from the BSEG table and Data source is 0FI_GL_4
See this link
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/gl-business-content-is-very-limited-no-line-items-level-datasource-available-102750
I hope this will help you.
Assidn points if this helps.
Regards
Tg
Edited by: Tg on Jul 10, 2008 8:24 AM

When entering credit card details, is the date field for the start date or expiry date? [was: payment]

I had my bank card accidently cancelled by my bank. I have entered the new card number into payment section and it is asking for a date. Is that date the time the card began or finishes - the section does not make is clear. Thanks

I know of no banking or credit company on the planet that would ever ask or need to ask about the "beginning" date on a crdedit or debit card.
I'd have no way of replying to such an absurd question if I were ever asked.

Date Prompt (for summary by date report)

Similar Messages

Maybe you are looking for