Date reads as December 31, 1969 on ipad.

Ipad date is 12/31/69.  When I try to change it, the ipad freezes up and is inoperable for about 24 hours.  During the freeze, the battery is drained.  I can recharge the battery with no problem.

Thanks for your post, I am grateful. I will look into purchasing a new backup battery tomorrow. To answer your question, I am also having an ethernet port problem and thought the two issues separate and thus posted them separately on the Discussions. The back-up battery problem and ethernet problem may, after reading replies, seem to merge or be related, but as I know posts and replies need to be fitting to the topic, here is the URL to my specific issue and question (unanswered at the moment) about what is causing my ethernet port not to recognize a plugged in ethernet cable.
http://discussions.apple.com/thread.jspa?threadID=1586861&tstart=0
Thanks.

Similar Messages

  • Date reads as December 31, 1969, and March 21, 2001. What's wrong?

    My PowerBook G4 has all of a sudden had a date problem. It changed to read "December 31, 1969." I received a message that, "Your computer's clock is set to a date before 2001. This may cause some applications to behave erratically."
    I then restarted and the date changed to March, 21, 2001, with the following message:
    "Your computer's clock is set to a date before March 24, 2001. This may cause some applications to behave erratically. Please use the Date & Time preference panel to set the clock manually. For more information, chose Mac Help from the Help menu."
    I then went online, and set my date and time in the system preferences to update automatically and the date did get back to the correct date of today.
    The fact that this happened concerns me and I would like to do everything to assure that I have a healthy computer. What happened, what is the problem and is there something that needs to be repaired or done to assure a happy running PB?
    Thanks.

    Thanks for your post, I am grateful. I will look into purchasing a new backup battery tomorrow. To answer your question, I am also having an ethernet port problem and thought the two issues separate and thus posted them separately on the Discussions. The back-up battery problem and ethernet problem may, after reading replies, seem to merge or be related, but as I know posts and replies need to be fitting to the topic, here is the URL to my specific issue and question (unanswered at the moment) about what is causing my ethernet port not to recognize a plugged in ethernet cable.
    http://discussions.apple.com/thread.jspa?threadID=1586861&tstart=0
    Thanks.

  • Unknown call December 31, 1969 at 6pm

    I went to check a voicemail message I had received earlier today and instead of my normal voicemails, there were 11 brand new missed calls from "Unknown". When I tried to listen to the message, there was no message or time value. When I looked at the calls details, they were all dated December 31, 1969 at 6:00pm. I restarted the phone and the calls were gone and my normal messages were restored however, I am very curious now as to what may have caused this. Did anyone else encounter this problem or know the cause?
    Any help would be appreciated!

    I have heard this can happen with this OS but I had the same problem a couple weeks ago when my anti-virus told me it expired on December 31, 1969. So, not sure if this is the cause of YOUR problem, but it happens a lot all over the place.
    In a nutshell, December 31,1969 is a common date printed by many computer programs when they have a certain type of bug. Date and time are generally computed from UNIX time, which started at 0 on January 1, 1970 GMT. It has been counting up once each second since then. When programmers mess up, they accidentally put the value '0' into a function that converts current UNIX into the familiar Date/Time format we are used to. In the US, which is 4 more more hours behind GMT, that fateful date is on December 31, 1969.
    I wrote a post explaining the whole thing, with LOTS of amusing screen shots of the problem on my blog.
    Good luck
    Lisa
    Yo, is Today December 31, 1969?
    Visit my "Real Life Debugged" Technology Blog

  • My Iphone 4 turn off... I turning-on and the system date was December 31 1969 and I can't change this DATE.

    Sorry my english. I speak spanish.
    Yesterday my Iphone 4 turn off and I don't know why. I can't tun on. I need to connect the cable and then I can turning on.
    But when the system star I see the date on my phone was December 31, 1969. 16:00Hr
    I can change it, no automatic no manual change. Only accept Dec 31 1969.
    I restore Factory setting via iTunes and then I restore the LAST BACKUP and my Iphone it's OK.
    Anybody know WHAT HAPPEN??  A virus or Intrusion.

    Most likely faulty battery. Make Genius Appointment and take iPhone to Apple, battery diagnostic test by Genius takes less than 5 minutes.

  • EMac - Date Resetting to December 1969

    This just started last week. I generally boot up every evening and the date/time is set to December 31, 1969. I open up Date & Time and set it to the current date and save. The next evening it is right back to December 31, 1969.
    Anyone have any thoughts? I don't have clue what to do about this>
    Thanks.

    Battery replacement info is onliine at eMac - Do-It-Yourself. The 1/2 AA 3.6v Lithium battery is a stock item at most electronics stores (e.g., Radio Shack) or can be ordered online.

  • Is anyone getting multiple blank emails with December 31, 1969 in their mailbox? I am using hotmail.

    Is anyone getting multiple blank emails? The send date on them is December 31,1969. I am using hotmail.

    CLose the mail app completely and reset your iPad. No data will be lost.
    In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Firefox update to 3.6.15 shows updating December 31 1969

    Fire fox update to 3.6.15 shows updating December 31, 1969

    That happens occasionally and is nothing to worry about. It happens if during the update for some reason it did not find the correct date so defaulted to December 31 1969.

  • Does December 31, 1969 mean anything to you?

    this has happened 3 times (I think) to my iBook now -- I'll start it up, and it alerts me my date & time setting are set at a date before -this time said- before March 27, 2007. Then it says some programs may act erratically due to this.
    When I go into Date & Time, the date, all 3 times, has been December 31, 1969.
    (The hour is off, too, like I think this time it said something like 6:03pm when it was 8:43pm).
    As far as I can tell nothing is affected, and after resetting the date, everything works fine.
    The first time happened when I had the installed Tiger OS the iBook came with; the 2nd was soon after I upgraded to Leopard; the 3rd was maybe 30 minutes ago.
    It doesn't seem to mess anything up, but I was kinda curious if anyone else has experienced this, or may know why it happens, or if I should be concerned at all?

    Thanks.
    I also googled the date just a minute ago, and saw the stuff about the epoch date & January 1, 1970-- then the time zone changes it back to Dec 31st...
    So- if it's something like a dead battery on the logic board causing it - would that be something I could, or should get replaced?
    The times it happened were very spread out.
    I have been a little concerned about my iBook lately, thinking it's getting kinda old... and I have been somewhat rough on it over the years. Maybe it's due for a general check-up anyway.

  • How do i move a data file from my pc to my ipad

    How do I move a data file from my computer to my ipad? It is my product catalogue and it would help if it were on my ipad.

    Plug the iPad into iTunes and you can use file sharing to move it into an app that supports file sharing and that document format.
    see http://support.apple.com/kb/ht4094
    Or, use an online storage service (iCloud, dropbox, box, google drive, sugarsync, etc) and upload the file to that.  Then on the iPad, from within the app you plan to use the file with, link to that service and download the file.
    The app will again have to work with that file type, and support the particular service you used.

  • I just got a new iPhone and i set up iCloud on my girlfriend's account. To change it on settings it says delete account. Will this delete her all her data and back up data for iCloud on her iPhone and iPad?

    I just got a new iPhone and i set up iCloud on my girlfriend's account. To change it on settings it says delete account. Will this delete her all her data and back up data for iCloud on her iPhone and iPad? Can i change it without deleting it? Please help.

    Delete the account on your phone. This will not delete any data on her phone or iPad, or data stored in iCloud.

  • I can't print using airprint from my iPhone 4.  Everything with the phone and the printer and router are up to date.  I can print from my iPad 2 with no problems.  What's wrong with the iPhone 4?

    I can't print using airprint from my iPhone 4.  Everything with the phone and the printer and router are up to date.  I can print from my iPad 2 with no problems.  What's wrong with the iPhone 4?

    I just wanted to leave a note that it's working now. I'm not sure if it was the latest iTunes update that got it working or that i decided to start a new library instead of using the one i had backed up on Windows 8 (it didn't occur to me to check using the old library when i re-installed iTunes). But if anyone is having this problem, it might be worth trying again with a new installation of iTunes to see if the latest update works for you, and if not, try using a fresh library instead of a backup (by fresh library i mean discard your old library completely and start a new library, not just restore as new iPhone, a whole new library).

  • Anyone knows if it's possible to transmit raw data through jack plug of an iPhone/iPad?

    I have a dummy hardware that have a jack socket and a simple protocol. I want to send/receive serial data from this hardware on my iPhone/iPad, but I don't know if this is possible, because is a very low level protocol. I also have bluetooth, but is not supported by apple, so I decided to investigate this option, with the jack plug. I called Apple support but they couln'd help me and they told me to ask here. Thanks!

    There are devices, like credit card readers, heart rate monitors and such that can do this.  I am no expert by any means, but those devices supposedly work as a Frequency Shift Keying modem, sending data at a pretty low baud rate to the software on the iOS device.
    So it is doable, but my understanding it takes a combination of a hardware device to transmit the data via the headphone jack, and then a specific iOS app designed to capture and read that data.
    Definitely non-trivial.
    P.S. the modem itself is commercially available, example -
    https://www.sparkfun.com/products/10331

  • How do I trnsfer my data and applictions from old to new ipad, how to trnsfer my data and applictions from old to new ipad?

    How do I trnsfer my data and applictions from old to new ipad, how to trnsfer my data and applictions from old to new ipad?

    If you have been syncing your old iPad regularly with your computer you can sync the new iPad to the same computer and transfer your stuff easily that way.

  • Why my ipad warranty doesn't match with date that i bought? I bought ipad 4 yesterday but as you guys know it was already discontinued.. Has my ipad been used?

    Why my ipad warranty doesn't match with date that i bought? I bought ipad 4 yesterday but as you guys know it was already discontinued.. Has my ipad been used?
    I bought in 14 january 2014 and the expiration said it will be in 5 september 2014
    Is it mean that my ipad had been activated in 5 sept las year?
    But the packaging is good and it looks like very new.
    Please help me....
    I bought in IT plaza in kuala lumpur, malaysia..
    Heeellllppp...

    The merchant told me it is new. And when they opened the box and turn the ipad on, the ipad asked me to activate first.
    Is the 'restore to factory setting' can make us must activate the ipad again??

  • My ibook keeps shutting down completely with the date to reverting back to 1969.  i restart only after i plug in charger it lets me, then change date and save.  the next time i use same thing happens, safari, iphoto, email are the only ones i have used.

    my ibook keeps shutting down completely with the date to reverting back to 1969.  i restart only after i plug in charger it lets me, then change date and save.  the next time i use same thing happens, safari, iphoto, email are the only ones i have used.
    please help!  i am at a loss here.
    thank you, movie lady
    ibook g4

    The iBook does not have a backup (PRAM) battery. It only has the main battery and a small capacitor which maintains the settings long enough to do a battery swap. If the battery is dead, what you are seeing can happen.
    If the battery is not a problem (or even if it is), you could try resetting the PMU and see if that helps.

Maybe you are looking for

  • How do I add a VM that has too many dependencies to be shown as "Map View " ?

    When in Table View there is no option to add/remove a VM to an App or to create/delete an App. f.eks. I added three VM's and created an App called "Convergion" Two of those VM's can only be shown in "Table View" because of too many outgoing dependenc

  • How to create hyperlink on a Dashboard page

    Hi, I need to have some text on a Dashboard Page which will be hyperlinked to some request. I am not seeing any option to do that in OBIEE, when i had used Link or Image option i am not able to design the dashboard page as i am not able to format the

  • How can i calculate distance on Image in a pictureBox ?

    This is a screenshot of what i mean: In the screenshot i have a cone. The cone is moving around 360 degrees. In the form1 top i have this: private float distanceFromCenterKm = 200F; //in kilometers private float distanceFromCenterPixels; //in pixels

  • VF01  - NUMBER_GET_NEXT

    Dear Guys Users are using transaction VF01, while saving it on R/3 4.6 C, transaction is taking 3 to 4 minutes on the function module NUMBER_GET_NEXT to bring the next number. Other users also cant process their transaction until the furst user gets

  • Quality of still images in PE9

    Sorry, I know this has been discussed before, but I'm only an occasional amateur videographer, and the terminology in other forum posts is going right over my head.  I've tried, honestly I have!  But it's all too technical. I have PE9. Need to use st