Date selection error BI4 infoView

Hello community,
I’m facing a problem here and I am looking for your help
After migration to BI 4 I faced a problem with date selection prompt (In infoView) when I open or refresh a report.
For example, If I select 02/02/2013 00:00:00, the system change the input to 01/02/2013 23:00:00.
This is very urgent please help me

This is a bug in 4.1 which is logged with ADAPT01710199
Check the note below
930605 - BI4.1 - The time stamp in the prompt is changing every time on refreshing the report in HTML Mode of WebI Report
Following are the fixes for Business Intelligence Platform 4.1
BI 4.1 SP01 Patch05
BI 4.1 SP02 Patch01
BI 4.1 SP03
BI 4.1 SP03 Patch1
BI 4.1 SP04
For a possible workaround, the Java Application server hosting BI Launchpad can be set to run using the UTC timezone to prevent time offsets in the prompt.

Similar Messages

Error in the Data Selection - Errors in Source System RSM 340

Hey Everyone,
I'm having an issue with loading a Delta for 0MAT_PLANT_ATTR. This is the second night it has happened, where I get the error "Error in the Data Selection". This error happens in the EXTRACTION part of the Monitor. And, we cannot run another Delta to see if it'll work, we have to delete the old Delta Init, and run a new one. The other error is "Errors in Source System - RSM340". That's as much it gives.
Could anyone suggest why this would be happening? I checked RSA3 in R/3, and no errors on the extraction. I also checked sm37 against the job that loads that data, and it completed successfully. I honestly don't think there's an issue with the data. We cannot have this happen often, and I just need to know if this is something that can be corrected.
Thanks,
John

There is nothing wrong with the TID's or anything like that. There is also no selection criteria in the infopackage.
When the Delta fails, the error occurs under EXTRACTION in the monitor. It seems to be successful under TRANSFER and PROCESSING in the monitor, which I find strange. Also, I run a new Delta Init with Data Transfer, and that works just fine.
So, I'm not sure what it could be?

Data selection error - peculiar problem

Hi Experts,
I have done a delta initialization with the selection as 05.2006 under the "from" field for "0calmonth".
I assumed that in the delta, the data will be loaded further from this date as i have not given any end date in the "to" field.
The delta loads are being done daily, and the data was being added in the infocube, but when we checked out the data in the cube there is no data for the june month(06.2006). And the selections fields in the "infopackage" and the "request tab" of the manage data screen show "05.2006" as the selection criteria even for the delta loads.
Now how can i get the data for the 06.2006 month without disturbing the delta, and can i change the initialization selection criteria.
Does the deletion of initialization in the infopackage effect the initial request and the delta loads in the cube.
Any help will be highly appreciated.
thanks & regards.

Hi brother(roman),
lots of thanks for ur prompt response.
just a simple clarification, i gave only the from date and not the to date, even then there were daily delta uploads only for the month of 05.2006.
how come this happen with out any changes in the data for that month in the source system being updated, but the records were being updated in the BW.
what might have occured.
thanks & regards

Data Selection error

When i execute the infosetquery(sq01),it shows "no datawas selected".But when I check in SE16 by giving table name it showsthe number of enteries for patricular dates,and also i check in ODS by right click and manage,
showing data for particulr dates..here data was loading
in fullupdate..
Unable to get where the problem?

Hi BPNR,
Do you want to do a inner join or a outer join? Try changing the join to outer if you have defined it as an inner join to see if you get rows back.
You can change this by right clicking on the row that has been joined to, and choosing the join you wish to perform.
Cheers! Bill

"Error Occurred in the Data Selection" while excuting InfoPackage for DataSource(ORT_PA_TRAN_CONTROL)

Hi,
Can anyone help me out with the data selection error in InfoPackage, while I was trying to extract the DataSource(0RT_PA_TRAN_CONTRL) to BW./
I've tried with "Init With Data Transfer" and without the use of Conversion Routines.
Thanks,
Taehoon.

Hi,
Why your using conversion routine at info pack level?
Actually conversion routine already defined for info object 0MATERIAL, general tab.
at info pack level, remove conversion routine MATN1 and don't give any selections.
First try to run data source at source system RSA3. if it works then later you can trigger at info pack level without any selections.
Thanks

Error occurred in the data selection

Hi Expert,
I met issue when full loading data from R3 via customized datasource.
the error message in request monitor is:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
I checked in RSA3, the data extraction is successful, but in BW, when execute the infopackage with or without data selection, both failed due to the same error.
I also checked the background job in SM37 in source system, the background BI* completed successfully, and the IDoc in both BW and source system processed successfully.
I also tried to replicate datasource and activate is using RSDS_DATASOURCE_ACTIVATE_ALL, delete infopackage and recreate it. but seems all this didn't work.
Could u pls tell me how to solve this issue? Thanks.
Eileen

Hello Eileen zhang,
I have exactly the same error as you, do you still remember how did you solved this problem?
Regards,
Thanks,
Maria João
Error message:
"Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request."

Error in Data selection in R/3 Generic Extraction Using function Modules

Hi Friends,
I have created a a generic data source using function module to load data from PA0000 and PA0001 Tables ,Function module is working fine when i execute it indipendently and the data source is also working fine when i extract data using RSA3. it is showing correct no of records 157.
When loading data into DSO from BW (using 3.x/7.0 flows) data is comming to PSA all 157 records but in the RSMO the load status is showing yellow when i look into the step by step analysis it is
data selection successfully started
Data selection successfully ended
All Data packets completed.
are showing in red.
after and hour time load getting failed and in the error message it is showing " job terminated in source system---> Request set to red"
it is giving this message wir no RSM 78.
Please let me know it

Hi Jerry,
Thanks for the immediate replay
But here in my source system job is getting terminated.
this is the status of job in Job logs.
the job is running till this step not going ahead.
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 157 records
Result of customer enhancement: 157 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 301 records
Result of customer enhancement: 157 records
Asynchronous send of data package 000001 in task 0002 (1 parallel tasks)
pl. update me if any idea.

Cube to Cube "Error in data Selection" plz help

Hi this is Ajay Reddy
when am sending data from Cube to Cube am getting an error
"Error in data Selection" plz help

Hi,
It needs a Note implementaion. I got similar problem in version BIW 7 and SP 11. We got the solution with on of the note . I am not able to recollect the note number.
Any way check the notes 920971,155471 may help you or not.
With rgds,
Anil Kumar Sharma .P

Error in data Selection

Hi experts,
I have added a field to 0emp_attr data source using DS enhancements, when trying to extract with full the job is getting failed stating " error in data selection".

Hi,
Just see following thing
1. Try to extract data in R/3 in RSA3 transaction.If it is working correctly no issue
2. If RSA3 throw issue check the definition of your code and try to debug it.
3. If RSA3 is fine check your Infopackage selection settings if it is ok or there is any error,If there is any selection try to remove it and load data.
Thanks and regards

"Error in data selection" while loading

hi,
while loading data from one ODS to another(datamart) I, after extraction of some data packages successfully I m getting an error:"Error in data selection"
i saw its help messages were
1)error 7 when sending an idoc
2)sql error in accessing table no 13
3)error in source system
in the source ods i have loaded thru init from R/3..
please help

Hi,
Take a look on the cosulting note : 610938.
In place of R/3 system you have to consider BW itself when you are reading the note.
With rgds,
Anil Kumar Sharma .P

Error in data selection of Infopackage

Hi,
My infopackage is failing with "Error in data selection". RSM 340 is the error message number.
Datasoucre: 0FI_AP_4
I have checked
1. Timestamp--consistent
2.Reactivated and replicated datasource
3.Checked SM58 in both BW and source systems and found it OK
I have taken Source jobs for 1 succesfull infopackage run and 1 unsucessfull infopackage run.
I see that Job log for unsucessfull has no call to customer enhancement and no data selection is done thereby.
i am attaching the job logs for 1 successful and 1 unsuccessful case. Please check and let me know the gap that is contributing to this error.

Hi nayab,
You and harish works at same location?
i seen same issue from harish as well.
http://scn.sap.com/thread/3578278
Thanks

Error occurred in Data selection

Hi All,
We have a delta load step for 0FIGL_O02 in one of our Process chains.This step failed with an error message-
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
On getting into monitor , the Status tab says" Error occurred in Data Selection".
Message text is :
Delta request REQU_D5XVIKL0GSIIZAWDIOB9HIOOQ is incorrect in the monitor
A repeat needs to be requested
Data target 0FIGL_O02 still includes delta request REQU_D5XVIKL0GSIIZAWDIOB9HIOOQ
If the repeat is now loaded, then after the load
there could be duplicate data in the data targets
Request the repeat?
Please advise.
Thanks,
Shweta

Hi
Repeat delta is only available in case of transaction Data source.
For transaction datasource system stores two fields
1. Last delta
2. Repeat Delta.
In case we set request status not ok and save the status, BW System udpates the repeat delta field and thus for next data extraction system marks the request diff. as repeat delta and starts from Repeat delta field value instead of Last delta.
In case of normal delta request from BW system takes Last delta fields into consideration.
Hope the below link will be clear in getting
/people/aaron.wang3/blog/2007/04/11/repair-bad-data-and-subsequent-data-targets-with-delta-update
Many thanks
Kiran

Error occured in data selection!

Hi,
data request was failed in my case when i schedule the data .
in details tab of monitor screen , under extraction it is saying " error occured in data selection".
while scheduling, i had given only one selection range of the many available fields.
is it mandatory that we should select all the available selection values?
can any body here tell me what could be the problem?
Ravi

This would occur when corresponding job of BW is running at R/3 side.
How to identify that ?
1] find sm37 of BW job.
2] double click the job, click on 'job details' from tool bar.
3] from the pop up screen, note down the server and job id.
4] log in to R/3, tcode SM51. Double click the server which is mentioned in above step.
5] a list of running job would appear, find the job from job id as in step 3. double click that and clikc on cancel program to kill the job.
NOTE - if the job is already over then it would not appear in list..
now you can repeat the load.
this works, i have tried it.

Error occurred in the data selection,If i do Repeat, then it is working fin

Hi Freinds,
Here is the error message,
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Details Tab:
Extraction (messages): Errors occurred
Error occurred in the data selection ....
If i do Repeat Delta, then it is working fine.
As it is a daily load, manually repeating the load from the past 10 days.
Have tried using program RS_TRANSTRU_ACTIVATE_ALL.
Any inputs pls.....

Hi Friends,
Thanks for your valuable inputs, Problem is solved.
The Reason is that, there is a time difference in the r/3 system and bi system.
The tolerable time differene shud be only 60 seconds.
Basis guys took down time at the OS level and hav made the timers sync.....
The problem is on the source system GNP time differences
persists, which can cause the problem with delta upload .
Universal Time Coordinated UTC....: 1291187626
Date and time of database.........: 01.12.2010 12:46:59
Date and Time of R/3-Kernel.......: 01.12.2010 12:43:46
Date and Time of ABAP-Processor...: 01.12.2010 12:46:58
ABAP Time zone Setup ..............: 19800
Date and Time / local time ........: 01.12.2010 12:43:46
This leads to an exception of the delta processing, because this
tolerates a deviation of 60 seconds only (When the repeat is processed,
the "local time" in the ABAP is higher than the qrfc counter at the time when the delta was processed -> So a repeat works fine).
Please synchronize the timers like described in attached note 101726 and 741734 to eliminate the time difference .
With Regards
Badri Thiriveedhi.

Error occured in the data selection while extract data from Source system

Hello Friends
i am facing Problem while extracting data to Biw System from SAP R/3 system
The error mesage is 'Error occured in the data selection '
i.e. Monitoring - Details tab - Extraction - With error

Hi
The delta wil take the Last init selection for loading data in to the BW...
Did u check the IP at the Update tab is it the correct delta only.. or its a full..
better to go to the RSA3 and check the extractor in the Delta mode .. if u give ur delta mode it automatically takes the selction options.. so please try in RSA3..
regards
CK
PS: CHECK THE INIT SELECTIONS TOO or do an init with outdatatransfer and perform the delta...
Message was edited by:
BW Star

Date selection error BI4 infoView

Similar Messages

Maybe you are looking for