Date selection is missing

Hi all ,
I received a complaint that user cannot select date selection on documents.
Let me explain in detail :
user will go to Sales A/R modules >> A/R Invoice .
When you click on posting date ,on the corner of the field , calendar selection (like a square box)is missing .(It should be there by default) and It happens to all date selection .User can do right on the field and select date selection and calendar pops up and It happens to all modules
It happened to only one client PC. Isn't that weird .I am sure it is affected by PC environment .
Can you share some advice .(reinstalling client is my last resort )
Thank you
Bishal

Thank you Gordon .
The reason I was reffering to (client reinstall)because this computer was affected by virus and we remove the virus from the computer and I am pretty much sure that client doesn't know how to disbale picker off .
But well ,I could be wrong . Once I get a chance to look, I will determine whether it is simple or complicated issue .
Thank you once again for your support
Bishal

Similar Messages

How to populate data selection in infopackage from spreadsheet

Hello,
I have to load data for thousands of missing CRM orders into BI via the BI-CRM extractor 0CRM_SALES_ORDER_I . We have list of those missing orders in a spreadsheet.
How do I populate these order numbers into the data selection tab of the data source?
I tried adding multiple orders at a time..butit doesnt load any data. On the other hand, when I was loading a single order at a time, it does load all the data.
Loading thousands of them manually will be a hectic job
Also, I cannot use ranges as they are not at all in range
Can somebody provide a workaround which hopefully will not involve any transports
Thanks!

This seems to be really cool! and I am able to open the editor in production too...
The only problem is I really have not ides how we can pass the parameters here..how we get the program to look up a spreadsheet and populate those records
Thanks for your input..it will be really helpful if you can provide me anymore information you have on htis..in the meanwhile, I will be doing some trial and error myself
thanks!

ICR Process 003 - question about data selection (table FBICRC003A)

Hello, I am implementing ICR process 003. We are doing several test and we I have some questions that I hope you can help me:
1 - If I run transaction FBICS3 - Customer/Vendor( Select Documents) and then FBICA3 - Customer/Vendor (Document Assignment ) several times (the same selection criteria) will the same documents be selected redundantly and will be stored redundantly in table FBICRC003A? I expected that this will not happen but It seems to happen in my test environment. (?)
2- If I need to delete the data stored in ICR '003' functionality I need to use transaction GCDE. The problem as I am using ledger '0L' for '003' process I cannot "delete data of one ledger" functionality -that allows to set selection data- and I have to "delete the data of an entire data group" that deletes all data stored in FBICRC003A & FBICRC003T tables. Should I set another ledger for '003' process in order to delete data using selection criteria? Is it recommended to not to use '0L' and create a new one?
I have read in reference documentation that "is not necessary to set up a SL", but since all my productive companies are running in the same client that is the ICR cliente I am wondering if could be better to create and set a SL.
Thanks in advance
Rafael Barreda
Edited by: Rafael Barreda on Sep 14, 2009 1:27 PM

Hi Ralph,
we have created a RFC in order to get data from client B to client A (where ICR system is placed). The summary is:
I need to import vendors/customer data from Client B that belongs to a certain company code "0001". The company is called "X" in both clients A & B although it only exists as a company code (FI) in Client B and just as a company (and trading partner) in client A.
Client A:
1- have set company "0001" as a "Company to be reconciled" at FBIC032:
RFC destination = ""
RFC destination for data selection = "ZRFC0001"
Local company= ""
Data Source="Documents of Current Process"
Separate Selection Process= "X"
Data Transfer Type="Asynchronous via Direct RFC Connection"
Sender field for reference number = "XBLNR"
Client B:
1- I have created the companies (V_T880) that I will need in order to inform trading partner on vendor's master data.
2- I have assigned company code '0001' to company "X"
3- I have assigned trading partners created on step 1 to vendors
4- I have post few FI documents with trading partners informed.
Then I run FBICS3 - Customer/Vendor: Select Documents in background but the programs takes a lot of time and do not select any document.
Do you think that I am missing something?
Thanks very much in advance.

HP Stream 7 The boot configuration data file is missing some required information

I have an HP Stream 7 tablet. When I open it up it shows a blue screen with the error "The boot configuration data file is missing some required information." Can anyone help as I can't get into the tablet to solve the error!

Hey @PaD2 ,
Welcome to the HP forums.
I understand you're unable to boot up your Stream 7 tablet.
Try accessing the recovery partition by holding the volume down button and power button at the same time. Please excuse my ignorance, as exact information on accessing the recovery manager appears to be unavailable for this exact model. If the down button doesn't work, up should get you in.
Once in the recovery manager you should be able to select Troubleshoot > Startup repair.
If the startup repair does not fix the issue I would suggest trying the full system recovery option, which you should find under Troubleshoot > Advanced.
Thanks.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Runtime Error during Phase Start Data Selection

Hello Forums,
We are using TDMS (2006_1_700) to extract a year's worth data from one client into a new client on the same ERP EhP4 system.
All the systems - central, sender and receiver are at the same DMIS levels(SP16) and all necessary notes have been applied.
During the Step 'Start Data Selection' of the Data Transfer Phase, we see around 60 of the ~12000 sub tasks abort with the below error:
Batch job for access plan calculation in sender system ended with errors
Message no. DMC_UTIL_MSG021
Diagnosis
The access plan calculation was executed as a background job in the sender system. In this background job, an error occurred.
Procedure
Check if a short dump occurred in the sender system while the access plan was calculated. If existing, this short dump contains further information about the cause of the problem.
A frequent error is that selection criteria for data reduction (for example selection groups) are wrongly defined which causes the database access that consideres these selection criteria to fail.
The corresponding dump in the Sender system is as below:
Runtime Errors         SAPSQL_WHERE_PARENTHESES
Exception              CX_SY_DYNAMIC_OSQL_SYNTAX
Error analysis                                                                                |
|    An exception occurred that is explained in detail below.                                      |
|    The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SYNTAX', was not                |
|     caught in                                                                                |
|    procedure "/1CADMC/DMCACS00P000000001" "(FUNCTION)", nor was it propagated by a               |
|     RAISING clause.                                                                              |
|    Since the caller of the procedure could not have anticipated that the                         |
|    exception would occur, the current program is terminated.                                     |
|    The reason for the exception is:                                                              |
|    The current ABAP program has tried to execute an Open SQL statement                           |
|    which contains a dynamic condition. The part of the condition specified                       |
|    at runtime is incorrectly parenthesized.
Please suggest in case any of you have encountered similar error and possible resolution.
Thanks in advance,
Srikishan

Hi Suman,
Thanks a ton. I somehow missed this when searching on the SMP.
I will implement the steps and post it back by tomorrow.
Regards,
Srikishan

Can't find 0FYTLFP OLAP Variable in InfoPackage Data Selection tab on 3.5

On BW 3.5, when generating an InfoPackage with the datasource as Purchasing Data(80PUR_C01), under Data Selection tab, for the InfoObject 0FISCPER, I selected 7 (OLAP variables)for the Type column, then click the button next to it and under the column of Details for Type to bring up a window, but when expending the OLAP Variable field list, can't find the following value in the list which shows up on BW 3.1:
0FYTLFP     0FISCPER Cumulated to Last Fiscal Year/Period (SAP Exit)
How to make the above value show up in the OLAP Variable list?   I thought maybe the variable 0FYTLFP needs to be installed in Business Contents, but there is no variable object type in Business Content. It sounds like a SAP Exit, but how to make the SAP Exit value show up on BW 3.5?
Thanks for everyone's input!

hey Rohit,
Besides the three variable values in the list on BW 3.5, now I find a new one in the list, called "0E_ROLE     0SR_ROLE     Role (SAP Exit)", I have no idea why this one shows up now. Now all the four variables in the list are:
1. 0CML12LM     0CALMONTH     Last 12 Months Excluding the Current Month
2. 0CMONTH     0CALMONTH     Current Calendar Month
3. 0E_ROLE     0SR_ROLE     Role (SAP Exit)
4. 0S_RQMRC     0REQUID     Most Current Data
0FYTLFP is still not in the list!   We can't try to create BEx query since our BW 3.5 system is just installed and we have not got to the step to ceate a query. I try the 2nd way you suggested by pressing F6 on this variable with the typed in value 0FYTLFP, get the following msg "BEx variable 0FYTLFP could not be evaluated - No error message", that means it would not work on BEx query as well, right?
What could be the reason that we can't see 0FYTLFP variable in our new installed BW 3.5? Do you think our BASIS missed installing sth?
Thanks
Message was edited by: Kevin Smith

MRP Wizard - Source data selection

Currently the MRP Wizard Source Data selection does not allow the selection of a single (or selected) Sales Order (SO).
Enabling such, would allow easy MRP planning around a specific order(s) received. (For instance an order is received for a task that is actually a complete project. Buying (and Production Orders) is done dedicated for this project. (And even stored separatly, by project.)
All sorts of work arounds exist - creating Forecasts from the Sales Order etc.... - which by the way is not very elegantly supported by the objects in the SDK either, so in the end, the missing link is to select the MRP Wizard source by SO.
By extension.... A Sales Order can be easily moved to a Delivery Note, via a Pick List (i.e the item is available off the shelf)
However a Sales Order cannot equally be moved to a Delivery Note via a Production Order (i.e the item has to be made) either via MRP Wizard, or manually. An easy "Copy To" (Production Order) extension would facilitate this process greatly.
Where multiple Production Orders are generated (say via the MRP Wizard) all from (one) Sales Order, can the (current for information only) Sales Order field on teh Production Order also be updated when the Production Order was generated by the MRP Wizard (or SDK for that matter)?
Can this be considered?

Hi Sam,
Please check this thread to find some clues:
/message/5718460#5718460 [original link is broken]
Thanks,
Gordon

F.27 get message no data selected

When running F.27 , there is "no data selected". though we have configured sap13 correspondence. and maintained peridic statement in customer master data. also maintained variant for porgram RFKORD11. Is thera anythign i am missing? Do I need to maintain anythign in the variant that probably I am mising. all i entered is comoany code, correspondence sap13, form id

Hello,
Prerequisites:
1. Correspondence form assignment to the program RFKORD10 in the transaction OB96
2. Assign indicator in customer master data
Mention Company code, Account type, indicator in the master data, key date for account statement, correspondence(SAP06) & execute F.27 it will work out.
Regards,
Venkat

Tab "Data targets" is missing when creating an InfoPackage

Hello,
when I´m creating an InfoPackage in the maintain screen, the tab "Data targets" is missing, although there are some active transformations to InfoProviders. In tab "Processing" the option "Only PSA" is selected and all other options are greyed out.
Does someone knows the reason? How can I definde the Data Targets to be processed in the InfoPackage maintain view?
Regards,
Meba

Hi All,
1.First of all, while creating transformations , mention sorce as Data source and target as Infocube and the same is for DTP creation also. Then we will get Data targets under "datatargets" tab.
2.As far as my openion is concerned,It will only works.. if we have the requirement to load Monthly data to one Infoprovider, yearly data to second Infoprovider and weekly data to third Infoprovider then we need to create three DTP's for for respective Infoproviders.In this case we can select appropriate Infoproviderwith respect to DTP's.
Thanks
B K Eswar

This is just to report a problem with Apple updates. I updated recently and the computer brought up my 2012 desktop with all my 2014 files and data including stickies missing! Now I hesitate to do another Apple update. What would you do?

Apple Updates: This is just to report a problem. I updated recently and on restart the computer restored up my 2012 desktop with all my 2014 files and data including stickies missing!!! Now I hesitate to do another Apple update. What would you do?

If all your files are missing
You may have logged in as a different user, such as Guest. Open the Users & Groups pane in System Preferences. Your name should be at the top of the user list, under Current User. See also this support article.
If files are missing from one folder
Change the Finder view mode; for example, from icon view to list view, or vice versa.
If files are present, but seem outdated
You may have started up from a different volume (disk.) Open the Startup Disk preference pane and check the selection.

Ufoai-data might be missing language files

Wanted to report this as a bug on the bug tracker, but the bug tracker doesn't let me register myself, so here I am.
I have a problem with the new release of UFO: AI (version 2.4). ufoai-data might be missing language files. I don't have (nearly) any text in UFO: AI, no story introduction (besides "introduction_sentence_1"), no Ufopedia entry (it says something like "grenade_launcher_txt") and no mail text (only says "mail_txt"). An ufo: ai dev thinks, that the packager might have forgot to build the language files.
Could someone confirm, that there is a problem and that it is the missing language files? Thanks.

Just in case anyone is still having this issue running ufoai, also make sure to check in your in-game settings that language is set to "English" or whatever language you like. My was set to "No Language" by default, and changing the exec line is absolutely neccessary even if you select a language.
In XFCE, I went to /usr/share/applications directory and edit ufoai.desktop as root.
Change the line "Exec=ufo" to "Exec=/usr/bin/ufo +set fs_i18ndir /usr/share/ufoai/base/i18n/"
Then restart from your menu and set your language. You are good to go.
Thought this might be helpful, sometimes ingame settings are easy to overlook.

Report help for multiple Date Select options

Hi Friends,
For a particular year wise report, the client wants 12 date select-options which are changeable and informal every year .The report will also be displayed as per the given date selection period wise. Please help me how to fetch the datas from the table as per the given selection period. Currently the report have one date select-option where the user gives selection range as 1.04 to 31.03. It's related to EB power consumption report and hence the new requirement on date selection which are informal and not a fixed date of every year.
Ex:Selection-Screen
Period 1 : 08.04.2008 to 12.05.2008
Period 2: 12.05.2008 to 20.06.2008
Period 3: 21.06.2008 to 28.07.2008
Period 4: 29.07.2008 to 15.08.2008
Period 5: 15.08.2008 to 21.09.2008
Period 6 : 21.09.2008 to 14.10.2008
The data will derive as per the above selection ranges.......
Please advise with example.
thanks & regards
Sankar.

>
sankar babu wrote:
> Ex:Selection-Screen
> Period 1 : 08.04.2008 to 12.05.2008
> Period 2: 12.05.2008 to 20.06.2008
> Period 3: 21.06.2008 to 28.07.2008
> Period 4: 29.07.2008 to 15.08.2008
> Period 5: 15.08.2008 to 21.09.2008
> Period 6 : 21.09.2008 to 14.10.2008
Hi,
In this case just derive all records matching dates between 08.04.2008 (low in first select-options) and 14.10.2008(high in last select-options.
Also my advice is to use a single select-options and prompt the user to give the dates as ranges in the multiple entries dialog which can be opened by clicking the button on the right side of the select-options.
Regards
Karthik D

Data package is missing in the return structure

Hi BW Folks,
I have an issue with ODS activation.While activating the data in ODS object am getting following error message
Activation of data records from ODS object XXXX terminated.
data package XXXXX contains errors with status 9 in table 'XX' but this data package is missing in the return structure.
In detail: The data package is entered in the return structure as incorrect.
Can anyone provide me the solution. Thanks in advance. Have a nice time!
Regards,
Nani.

HI
Check these links
Re: Status 9 error when activating an ODS in a Process Chain
ODS activation error - status 9
Error while data loading-terminated with Status 9
Error while data loading-terminated with Status 9
hope it helps
regards
CK
Assing points if usefull

Can i have html code for date select options (SEARCH HELP)

Hi frinds,
I have a BSP Page with input as date.
Can i have html code for date select options (SEARCH HELP)
Moosa

Hi
Please find the sample code below.
FROM DATE
      <htmlb:inputField id        = "dd"
                        width     = "45%"
                        type      = "DATE"
                        showHelp = "X" <- Search help
                        alignment = "CENTER"
                        maxlength = "10"
                        disabled = "TRUE"
                        value     = "<%= w_FROMDATE %>" />
TO DATE
      <htmlb:inputField id        = "dd"
                        width     = "45%"
                        type      = "DATE"
                        showHelp = "X"
                        alignment = "CENTER"
                        maxlength = "10"
                        disabled = "TRUE"
value     = "<%= w_TODATE %>" />
Thanks
kalyan

Error occurred in the data selection

Hi Expert,
I met issue when full loading data from R3 via customized datasource.
the error message in request monitor is:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
I checked in RSA3, the data extraction is successful, but in BW, when execute the infopackage with or without data selection, both failed due to the same error.
I also checked the background job in SM37 in source system, the background BI* completed successfully, and the IDoc in both BW and source system processed successfully.
I also tried to replicate datasource and activate is using RSDS_DATASOURCE_ACTIVATE_ALL, delete infopackage and recreate it. but seems all this didn't work.
Could u pls tell me how to solve this issue? Thanks.
Eileen

Hello Eileen zhang,
I have exactly the same error as you, do you still remember how did you solved this problem?
Regards,
Thanks,
Maria João
Error message:
"Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request."

Date selection is missing

Similar Messages

Maybe you are looking for