Date shown on dock not updated
hi
I noticed that after rencent update 10.5.1 on the dock that ical application (when closed) is not anymore updated with the current date of the day.
Any idea how turn that feature on again?
tks
solved by myself, it was simply to many days that I was not shutting down my mac.
now function has been automatically restored.
ciao
Message was edited by: jakotyo
Similar Messages
-
Scheduled finish date for process orders not updating in BW
We are having problems with the scheduled finish date (GLTRS) for process orders. When the process order is already released, changes done in R/3 on the scheduled finish date will not result to a delta hence data in BW is not updated. Table AFKO, where data is coming from, is always updated with the changes though. 2LIS_04_P_MATNR is used in extracting the data.
Has anyone experienced the same problem? We are looking for possible ways on how to have a delta whenever there are changes on the process order even after it is already released.
Any help would be greatly appreciated...Hi Donna,
If I've understood your problem correctly, you can increase the load frequency as Sriee has pointed out.
If you want latest data frequently and if you are on BI 7.0 then you can look at Real Time Data Acquisition(RDA)
Regards,
Tom. -
Validity End Date for A012 relation not updated
Hi All,
I am working on SRM5.0 and the HR org structure is replicated from ECC to SRM via idocs. Now, for one particular user, who holds position in 2 org units, the HRP1001 table data is incorrect.
For one of the relations A012 between S-O, the end date shown is in the past. I checked the ECC tables for this employee and the A012 relation is valid till 31/12/9999. But, in the SRM system, this date does not get updated.
Due to this employee is not shown as an approver for that particular org unit.
Does anyone know how I can update this date?
Regards,
AncyOne of the Org unit is under the other org unit. So, I updated the position with the relation to the higher org unit only. So in the SRM system, by default, the supervisor for this org unit is the supervisor for the lower org unit too, unless there is a new supervisor for the lower org unit.
-
i have modify the data STREET to "ANG MO KIO"
http://i192.photobucket.com/albums/z231/yzme/d1.gif
but the data in server still "HEAVEN ST"
http://i192.photobucket.com/albums/z231/yzme/d2.gif
I am using Time2Way T01, if it is when i sync the data will be uploaded, or do i need to configure somewhere to get the data upload ?
if the data in client and middleware is different, when i sync , the data from the middleware will again download to the client replace the modified values
OR
the data in the client will uploaded to the middleware and trigger the MODIFY bapi wrappers ?
<b>
when i check my MEREP_MON, and MEREP_LOG there is no data inside this meaning after i changed the values and perform the sync, Inbox and Outbox still remain the previous data as well as inside the MEREP_LOG,
is it the bapi wrapper not call by the client ?
</b>
and i find out that my bapi not get called, what additional code should i add instead of the code below.
DO I NEED TO IMPLEMENT SOME CODE FOR UPLOADER ??
do i have to change the reqDirectSync="true", if yes, how do i changed, just change inside the editor, or there is somewhere to configure in sapgui
after i changed the data , i try to sync, and i check on merep_mon
what specific or additional steps i need to configure, on uploader / receiver or synchronizer
<b>i do not implement any syncBoDelta or global reset ?</b>Can someone explain the term "delta" to me and its activities?
if i have upload something, and sync, the Inbox should have something right ??
i just put add this code to modify my records
public String modifyRecord(String eventName,boolean didNavigate){
String syncBoName="ZCON";
String syncKey="0001230297";
tableViewBean.setString(syncBoName +" "+syncKey);
System.out.println("SyncBoName: " +syncBoName + " syncKey: " +syncKey);
tcp = TableContentProvider.instance(syncBoName);
tcp.modifyTable(syncBoName,syncKey); return JSP_DETAIL_SYNCBOINSTANCE;
public void modifyRecord(String syncBoName,String syncKey){
SyncBoDescriptor sbd=null;
sbd=descriptorFacade.getSyncBoDescriptor(syncBoName);
SyncBo sb=null;
try{
System.out.println("bp 2");
sb=dataFacade.getSyncBo(sbd,syncKey);
}catch(PersistenceException pex){
System.out.println("Exception in modifyRecordLoc:" +pex.getMessage());
SmartSyncTransactionManager transactionManager;
try{ transactionManager=dataFacade.getSmartSyncTransactionManager();
if(!transactionManager.isTransactionStarted()){
transactionManager.beginTransaction();
boolean b8=false;
b8=setHeaderFieldValue2(sb,"STREET","ANG MO KIO");
transactionManager.commit();
SetSendType();
listAllOutDelta();
checkInboxConflict();
}catch(Exception e){
System.out.println("Exception in modifyRecordAmt2:" +e.getMessage());
public void checkInboxConflict(){
ErrorConflictInbox errorConflictInbox= SmartSyncRuntime.getInstance().getInboxNotifier().getErrorConflictInbox();
MeIterator iter;
SyncBoResponse resp;
try {
iter= errorConflictInbox.getAllSyncBoResponses();
while(iter.hasNext()){
resp= (SyncBoResponse)iter.next();
String bo=resp.getSyncBoDescriptor().getSyncBoName();//SyncBo Name
String state=resp.getSyncBoResponseState().toString();
String res=resp.getResponseType().toString();//Get the SyncBo response type (conflict or ERROR)
String msg=resp.getText();// This will return the exact message from the server
System.out.println("bo:" +bo +" state: " +state +" res: " +res +" msg:" +msg);
System.out.println("state:" +resp.getSyncBoResponseState().toString());
if(resp.getSyncBoResponseState().equals(SyncBoResponseState.INITIAL)){
String a=resp.getSyncBoResponseState().toString();
resp.acceptClientSyncBo();
String b=resp.getSyncBoResponseState().toString();
resp.delete();
System.out.println("state1: " +a +"state2: " +b);
boolean syncStatusComplete= SmartSyncRuntime.getInstance().getInboxNotifier().isSyncStatusComplete();
System.out.println("syncStatus:" +syncStatusComplete);
}catch (Exception e) {
e.printStackTrace();
public void listAllOutDelta(){
SyncBoOutDeltaFacade deltFac=SmartSyncRuntime.getInstance().getSyncBoOutDeltaFacade();
MeIterator allDelta;
try {
allDelta = deltFac.getAllDelta();
while(allDelta.hasNext()){
SyncBoOutDelta outDelta=(SyncBoOutDelta)allDelta.next();
System.out.println("SyncKey:" +outDelta.getSyncKey() +" Action:" +outDelta.getAction()
+" State:" +outDelta.getStateId() +" SendType:"+outDelta.getSendType());
} catch (SmartSyncException e) {
// TODO Auto-generated catch block
e.printStackTrace();
} catch (PersistenceException e) {
// TODO Auto-generated catch block
e.printStackTrace();
public void SetSendType(){
SmartSyncRuntime ssRuntime = SmartSyncRuntime.getInstance();
SyncBoOutDeltaFacade boDeltaFacade = ssRuntime.getSyncBoOutDeltaFacade();
SyncBoDescriptorFacade descF = ssRuntime.getSyncBoDescriptorFacade();
SyncBoDescriptor myBO = descF.getSyncBoDescriptor("ZCON");
boDeltaFacade.setSendType(myBO, SyncBoOutDeltaSendType.SEND_DIRECT);
//SyncManager.getInstance().synchronizeWithBackend(VisibilityType.USER_SHARED);
public boolean setHeaderFieldValue2(
SyncBo sb,
String headerFieldName,
Object value) {
SyncBoDescriptor sbd = sb.getSyncBoDescriptor();
//RowDescriptor trd = sbd.getTopRowDescriptor();
System.out.println("bp 10");
RowDescriptor trd=sbd.getRowDescriptor("010");
System.out.println("bp 11");
FieldDescriptor fd = trd.getFieldDescriptor(headerFieldName);
System.out.println("fd:" +fd.getFieldName());
if (fd != null) {
BasisFieldType bft = fd.getFieldType();
//Row header = sb.getTopRow();
System.out.println("bp 12");
//Row header = null;
Row[] header=null;
//try {
//header = sb.getRow("0001211181");
//header=sb.getTopRow();
header=getItemInstances(sb,"010");
if(header==null){
System.out.println("is null");
}else{
System.out.println("not null");
//} catch (PersistenceException e1) {
// TODO Auto-generated catch block
// System.out.println("Exception getRow:" +e1.getMessage());
// e1.printStackTrace();
System.out.println("bp 13");
try {
// Integer operator
if (bft == BasisFieldType.N) {
System.out.println("Numeric");
NumericField nf = header[0].getNumericField(fd);
if (nf != null) {
BigInteger ii = new BigInteger(value.toString());
nf.setValue(ii);
return true;
} else {
return false;
// Character operator
if (bft == BasisFieldType.C) {
System.out.println("Character");
CharacterField cf = header[0].getCharacterField(fd);
if (cf != null) {
cf.setValue(value.toString());
return true;
} else {
return false;
// Decimal operator
if (bft == BasisFieldType.P) {
System.out.println("Decimal");
DecimalField df = header[0].getDecimalField(fd);
System.out.println("bp 1.1");
if (df != null) {
System.out.println("bp 1.2");
BigDecimal bd = new BigDecimal(value.toString());
System.out.println("bp 1.3");
df.setValue(bd);
System.out.println("bp 1.4");
return true;
} else {
System.out.println("bp 1.5");
return false;
// Similar operation for time and date operator fields
if (bft == BasisFieldType.D) {
System.out.println("Date");
DateField df = header[0].getDateField(fd);
if (df != null) {
if (value.toString().equals("0")) {
Date dat = Date.valueOf("0000-00-00");
df.setValue(dat);
} else if (!value.toString().equals("")) {
Date dat = Date.valueOf(value.toString());
df.setValue(dat);
} else {
Calendar cal = Calendar.getInstance();
java.sql.Date bd =
new java.sql.Date(cal.getTime().getTime());
df.setValue(bd);
return true;
} else {
return false;
// Similar operation for time and date operator fields
} catch (SmartSyncException ex) {
System.out.println(ex.getMessage());
} catch (PersistenceException e) {
System.out.println(e.getMessage());
return false;
SyncType: T01 Wrapper: GetList,GetDetail,Modify
<?xml version="1.0" encoding="utf-8" ?>
- <MeRepApplication schemaVersion="1.1" id="ZCON" version="01">
<Property name="CLIENT.BUILDNUMBER" />
<Property name="C_APPLRESOLVE" />
<Property name="DATA_VISIBLE_SHARED">X</Property>
<Property name="E_APPLRESOLVE" />
<Property name="FACADE_C_CLIENT">X</Property>
<Property name="FACADE_E_CLIENT">X</Property>
<Property name="HOMEPAGE.INVISIBLE" />
<Property name="INITVALUE" />
<Property name="RUNTIME">JSP</Property>
<Property name="TYPE">APPLICATION</Property>
- <SyncBO id="ZCON" version="1" type="timedTwoWay" allowCreate="false" allowModify="true" allowDelete="false" reqDirectSync="false" downloadOrder="1">
- <TopStructure name="TOP">
- <Field name="SYNC_KEY" type="N" length="10" decimalLength="0" signed="false" isKey="true" isIndex="true">
<Input type="create">false</Input>
<Input type="modify">false</Input>
</Field>
- <Field name="PERSNUMBER" type="N" length="10" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <ChildStructure name="010">
- <Field name="SYNC_KEY" type="N" length="10" decimalLength="0" signed="false" isKey="true" isIndex="true">
<Input type="create">false</Input>
<Input type="modify">false</Input>
</Field>
- <Field name="PERSNUMBER" type="N" length="10" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="CITY1" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="CITY2" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="STREET" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="HOUSE_NUM" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="REGION" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
</ChildStructure>
</TopStructure>
</SyncBO>
</MeRepApplication>
Message was edited by:
yzme yzme<u>my intention is very simple, i just need to update a field in a row and update to the middleware so that the backend will reflect the changes. </u>
>2 if i set the conflict/error handling to application, then i should have to implement some code for it, right ?
>3) List syncbooutdelta
<b>SyncKey:0001233035 Action:M SendType:SEND</b>
doesnt it mean that when i sync , the uploader will pick up this data and do a modification ??
i have change the metadata like this
<SyncBO id="ZCON" version="1" type="timedTwoWay" allowCreate="false" allowModify="true" allowDelete="false" reqDirectSync=<b>"true" </b>downloadOrder="1">
1) i try to sync the application and check the worklist monitor, there is nothing in the inbox ? how come ?
2)if i test using emulator, i try to modify a value and execute, i am getting the following error.
<u>
Header action from mobile="MOD", R/3 action="ADD"
Return code 1 (DOWNLOADER)
</u>
i try to modify not "Add"
3) I am using Time 2 Way , how to check it is synchronous or asynchronous ? in merep_sbuilder, the default asyn. is checked, meaning async ??
the type is T01 , ASYNC
4)
public void checkInboxConflict(){
ErrorConflictInbox errorConflictInbox= SmartSyncRuntime.getInstance().getInboxNotifier().getErrorConflictInbox();
MeIterator iter;
SyncBoResponse resp;
try {
iter= errorConflictInbox.getAllSyncBoResponses();
while(iter.hasNext()){
resp= (SyncBoResponse)iter.next();
String bo=resp.getSyncBoDescriptor().getSyncBoName();//SyncBo Name
String state=resp.getSyncBoResponseState().toString();
String res=resp.getResponseType().toString();//Get the SyncBo response type (conflict or ERROR)
String msg=resp.getText();// This will return the exact message from the server
System.out.println("bo:" +bo +" state: " +state +" res: " +res +" msg:" +mtext);
boolean syncStatusComplete= SmartSyncRuntime.getInstance().getInboxNotifier().isSyncStatusComplete();
System.out.println("syncStatus:" +syncStatusComplete);
}catch (Exception e) {
e.printStackTrace();
<u>bo:ZCON state: INITIAL res: CONFLICT msg:Conflict: R/3 = delete, device = modify
SyncStatus=true (complete)
</u>
5) after that i change my code to this
while(iter.hasNext()){
if(resp.getSyncBoResponseState().equals(SyncBoResponseState.INITIAL)){
String a=resp.getSyncBoResponseState().toString();
String a1=syncBO.getSyncState().toString();
resp.acceptClientSyncBo(); //No transaction stated to commit
resp.delete();
String b=resp.getSyncBoResponseState().toString();
String b2=syncBO.getSyncState().toString();
System.out.println("state1: " +a +"state2: " +b);
System.out.println("SyncState1: " +a1 +"SyncState2: " +b1);
<u>state1: INITIAL state2: RESOLVED </u>
<u>SyncStatus1:QUANRANTINE SyncStatus2: INCONSISTENT</u>
and i try to sync ...no data in worklist
6)i try to list out all the delta to be uploaded
ListAllOutDelta to be upload
<u>SyncKey:0001233349 Action:I State:99925F8E24DFFE49A4563C5E018E9B61 SendType:SEND
</u>
i am modifying the rows, not Insert a new row, the Action:'I' instead of 'M', pls clarify on this.
after i sync, i found out that there is 2 record with different syncKey but same primary key and all attributes appear to be same except the attribute that i changing.
<u>SYNCKEY PERSNUMBER CITY STREET HOUSENO</u>
0001230298 000000000 HELL <u>ANG MO KIO</u> 0123456789 (modified record)
0001230299 000000000 HELL <u>HEAVEN ST</u> 0123456789(old record)
i check the application and found out that the previous record that i modify have its value changing locally but not updated into the backend, after sync, there is another record downloaded into this application which is the old record before i modify with different syncKey.
but when i check the backend table, there is only 1 record inside, because i dont implement the 'Create' Bapi.
does it make sense ?
7) when i check my client , the data is persisted with modified value , but the changes is not reflected in the server, how come the data in client is not uploaded to the server.
acceptClientSyncBo will make the client wins how come the data is not get updated in server ?
Re: Regarding modifying Sync BO
According to him, can anyone translate the things highlighted below
for modifying one sync bo instance , there is no need to use createUnlinkedCopy()..
just use like this..
sb = dataFacade.getSyncBo(sbd,key);
SmartSyncTransactionManager transactionManager;
transactionManager = dataFacade.getSmartSyncTransactionManager();
transactionManager.beginTransaction();
setHeaderFieldValue(sb,"PERSNUMBER","9866321467");
setHeaderFieldValue(sb,"FIRSTNAME","RajaSekhar");
setHeaderFieldValue(sb,"LASTNAME","Varigonda");
setHeaderFieldValue(sb,"PROFESSION","Technical Specialist");
setHeaderFieldValue(sb,"***","MALE");
setHeaderFieldValue(sb,"BIRTHDAY","1977-09-28");
setHeaderFieldValue(sb,"HEIGHT","165");
setHeaderFieldValue(sb,"WEIGHT","75");
// Commit the transaction
transactionManager.commit();
setHeaderFieldValue - can be used to set value in new sync bo instance , or modify the instance.
<b>
But one main think here have to consider is , if you have created one Sync Bo instance , not synchronized with back end and u have modified that, then thats just like a creation .So during sync this will call Create Bapi Wrapper.
</b>
But after synchronization , is u are modifying that instance , then it is a modification(will call MODIFY Wrapper in back end during synchronization). u must have the right to modify this instance in the client side.
hope u got it.
u can debug MI Applications in NWDS.
refer this blog written by Arun
/people/arunkumar.ravi/blog/2006/02/22/execute-debug-your-mi-code-from-nwds
let me know , if u have doubts
Regards
Kishor Gopinathan
pls comment... -
Last Logon date and Logon time not updating in table USR02
Hi,
Please help us on this. After customer successfully logged in the webshop, we are checking the table USR02 in CRM system and the Logon date and Logon time is not updated. Because of this, the customer will be locked after certain number of days. When we check it in ECC system, customer's last logon date and time is updated. Can you tell us what could be causing this? Any advise what we need to check? Thanks in advance!
Regards,
MikeHi
1. Please check if the USAPPLREF table in ECC has the correct mapping done between the LOGON User and the Sold-to party (Customer)
2. Please check the validity of those user in SU01 user data.
3. Please check the USERS data from the USERADMIN Link (if it is configured in your scenario through XCM settings for USERS)
Hope this will help.
Regards -
Dates in Events do not update automatically
After iPhoto made events out of my photo library during conversion from from iPhoto06, there are often photos from several days in one "event". I can live with that most of the time, but in several instances I split events. Unfortunately, the dates of the original, unsplit event do not update automatically. This often results in a wrong order of events. If, e.g. I take out pictures from August 10th from an event with photo dates August 10th to August 13th, the original event still shows the starting date of August 10th, and orders the event between August 9th and August 11th.
The expected behaviour would be that the starting date of the modified event would change automatically to reflect the changes. This does not occur, and, worse, there is not even a possibility to change those dates manually.
Am I missing something important here, or is this an VERY annoying bug in iPhoto08?I agree - but this is a user forum and we can NOT fix anything - only try to help either follow the correct procedures of (as in this case) identify a work around to use until Apple fixes the problem.
As far as I know the work around of creating a new event form one photo and moving the remaining photos to the new event is the ONLY way arround this problem right now.
Using the work around will accomplish what you need even though it should not be necessary. Complaining about on this forum will not accomplish anything - compalining directly to Apple might -- iPhoto menu ==> Provide iPhoto Feedback.
Larry Nebel
PS - and reading the thread prior to get the work around prior to adding "I have the same problem" would actually be a pretty good idea too! -
Last Skipped Date, Skip count, are not updated in any songs that i listen in my iPhone5s
I've been using smart playlist that's relays on the play count, last skipped date and skipped count fields... I have been using an old ipod to heard my music through this smart playlist that live updates all the time and it was working great.
So my issue is, since i bought a new iPhone 5S and start using it to listen music, my smart playlist that relays on " play count, last skipped date, skipped count " fields are not updating, and when i connect my iphone to the PC i realize that those fields never update after i play or skip any song in my iPhone.
So, I'm not sure if this is an iPhone restriction, that i need to use my iPod again to get my smart playlist that relys on those fields to work... or my iphone is defective and need to re-install the iOS.
Any help on this matter will be enormously appreciated
Thanks in advanceI have playlists that rely on the Last Skipped and
Skip Count properties of songs, but these items only
seem to be triggered if the song is fast forwarded
between 3-20 seconds into the song. I tried to skip
I think this is how it's intended, though there isn't much info on this feature. I've seen the same behavior and other users have reported same.
One thing that threw me off for a bit using this feature was trying to use with playlists where the songs had "remember playback position" checked. Last skipped doesn't register at all with these tracks. -
When Adjusting PowerPivot Data Source it's not updating "Connection String" In Workbook
When going into an existing PowerPivot that already has a data connection to a MySQL database, I am having issues when trying to edit that data connection. Within the PowerPivot>Manage window, here is what my connection string looks like.
It successfully connects and I am able to refresh the data. My issue is, why when going to the Data>Connections>Custom>Properties>Definition area --- Why is the connection string not updating here? It's the same connection string from before
I modified it in the powerpivot manage window. I need it to be updated to my new connection string credentials. Here is window I'm talking about.
Any help is greatly appreciated!!!! Thank you!Tim, are you still trying to get this figured out?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it! -
Configuration data on sales order not update with idoc ORDERS05
Hi All,
I'm trying to post Inbound ORDERS05 to create a sales order with configuration data. In particular i'm using the messsage type ORDERS, process code J3AA (identification J_4A_IDOC_INPUT_ORDERS).
On the IDOC tree, segments E1CUREF,E1CUCFG,E1CUINS,E1CUVAL are correctly valorized.
It is creating the order but not updating the configuration data, can someone please let me know if there are other fields/Segments that need to be populated in order to get the config updated in the sales order ?
Thanks
PiergiorgioHi ,
I am facing similar issue ( Configuring data in orders idoc )
Please give your inputs if your successfully
Thanks,
Raghu.. -
Installed new Mountain Lion now Date and time do not update
Hi,
I have a new Macbook pro bought June 2011 and find that using Safari and playing a Flash Movie it will glitch the movie stallas and will nor play correctly.
I see Kernel tasks are at 700 Mem and CPU at aaround 7%.
So i reinstall a new downloaded system from Apple Mountain Lion.
Stiil kernel Taskc are at 3 to 5% and and mem at 650meg
I still get the glitches in the new Safari and now i see the Date and time shows but is frozen till i click in the data and time in the upper right hand corner of the screen it will then Upate the time.
What is the problem here a clean install i see permissions have many errors after a clean install and will not fi, with disk utillities
any help here please
Thanks for any time givenwersix wrote:
How do I remove these? Do I just delete the folders using Finder? I'm new to Mac OS X.
I'm seeing a number of posts about network printing problems after upgrading to Mountain Lion. I'm guessing the problem is something other than the drivers themselves.
I sure appreciate your willingness to help me out with this!
Yes, just delete the folders.
There could be other problems, not driver-related, but updating to the most recent drivers will at least eliminate that possibility.
Happy to try to help. -
Numbers for IPAD, Date Stamp that do not update everytime we revise the document
How can I have a Date Stamp of the original date the document was created (Automatically), I used the TODAY function but it updates every time the document is opened.
Thanks for the suggestion. I had tried this earlier with no success either. Even with the padlock unlocked I can't even change the tab that says "OPEN WITH". I still get the... "You do not have permission to open the document “iPhoto Library” message. You may also it continues to say "Fetching" where it should say my user name at the bottom.
-
Master Data Info Object is not updating Attribute data
Dear Sdns,
We are loading master data to ZCOMP_GL Info object through flat file extraction... ZOMP_GL have four attributes.. Leaving three of the attributes Only one of the attribute which is CS_ITEM holds the data.
We loaded data ffrom flat-file.. It laoded sucessfully upto the PSA and data is available... And when we runned DTP the load was successfull.. In the manage screen of the Info object it shows the records are added successfully.. But when we see the data in ZOMP_GL. We are not able to see the Data for CS_ITEM which is attribute.... Also we runned Attribute change run..
Kindly Advice me..
Warm Regards,
AluriActivate the data in the info object.
Ravi Thothadri -
KCLJ - Master Data upload - Purchasing views not updating
Hi
I have been trying to upload the external data file using KCLJ. The General view and FI view of the Business Partner is being created, but the Purchasing view is not being created. can anyone assist in how to upload this role?
thanks
ChristopherCan you send us the structure that you are using? You may need to use the CHIND at certain places to upload values to certain tables.
-
Data not updating in table ,data transfered using DTW
Hi Everybody,
I had transfered data using DTW, it shows that data imported,but it not updated, that means it not shows in database.
So please so me any solution to this.
Regards,
SrinivasHi suda,
I am giving he detailes of the BusinessObject
BusinessObject =oUserLanguages
template=oUserLanguages.csv
i had copied the oUserLanguage.csv file and entered data into it and saved it(comma deliminated)
steps:
1.i had selected oUserlanguage object from list.
2.i had selected source file (oUserLanguage.csv )
3.the data properly matched and data is displayed when source tab is pressed. and ields are properly matched.
4.three check boxes are checked.
5.i had seen the message you are sucessfully specified required information for imporing data
6.in lost step it shows like below
Total: 2 business object(s)
2 business object(s) imported successfully
0 business object(s) not imported
0 business object(s) updated successfully
0 business object(s) not updated
7.in log files status shows succeeded
But I had cheked the languages , the data imported not shown.
Regards
srinivas -
Bdoc received but data not updated
Hello,
I am using CRM4.0
I changed the customizing in table CRMC_ACT_DECOM to change values of field KV_DEKO.
Then, I transported the modification usign R3AS4 to CDB.
I can see that the table CDBC_ACT_JOURN is updated correctly with the new values.
My problem is that I don't see the modification on MSA. When I try a select on this table, i just see the old values.
It tried to do an extract on replication object CRM_DNL_ADOCCH for my site, the bdoc is well sent and I can see the new data in it, but even after synchronisation, the data in MSA is not updated...
What am I missing ?
(the strange thing is that I didn't have this issue in dev environnement)
Thanks in advance,
EDIT : ok when I launch this query in query analyser :
SELECT *
FROM dbo.CDBC_ACT_JOURN
WHERE FIELDNAME = 'KV_DEKO'
I get all the data.
But when I am using the query in SQL Server entrerprise management, I don't see them !!
Edited by: Louis-Arnaud Bouquin on Nov 10, 2009 10:26 AM>
sujith golla wrote:
> Status of the IDOC is "53", so successfully posted
> records that have the status can NOT be reprocessed using BD87
There are some tricks: you can either create a copy of the IDoc in WE19 and then process it or use report RC1_IDOC_SET_STATUS (be careful though) to update the IDoc status.
However, you might want to do some more research and use suggestions above before resorting to these measures.
Maybe you are looking for
-
Please HELP / problem with Mac to PC migration
Good afternoon, I have a 1TB WD mybook external HD to which I would like to copy large files like movies, music and pictures from my Mac and then connect it to my wife's PC and place it on her internal HD. With the HD being formated on my mac, I'm un
-
Error 500.00 just with Azure, locally working well
Hi, how are you? I'm testing the deploy via Visual Studio 2003, but when I deploy I got the error 500.00. If I run via Visual Studio (Locally) works fine but using Windows Azure I get this error Module ManagedPipelineHandler Notification Execut
-
My daughter has set my apple id the same as hers by mistake anyone know how to change this pls
my daughter set up my iphone 4s and when she set up the apple id she used hers by mistake and know we are both on the same id and every message either of us sends or recieved it is going to the other person aswell does anyone know what i can do to ch
-
HT4972 i am not able to activate my iphone after update ios5
plz help me to activate my iphone coz its not responding after updating IOS5
-
Where do I get end of support information for SJSAS?
I would like to get the release date of the application servers and date of end of support. Where could I get these information?