Date stamp from mDV camera not visible on viewer , nor recorded.

Though the data code is pressed till the date and time stamp is visible on the camera Display,
it is not received by final cut pro.
For some projects they want some time and date stamped , sequences.
Can anything be done ?

Date stamp data is not something read by FCP ... try iMovie,
Alternatively, check the camera's output options, it may be possible to output the data burnt-in on the s-video or some such ... if you have the requisite i/o hardware you could then digitize from that signal path

Similar Messages

Set up table data extracted from R/3 not visible in data target of BW

Hai friends,
         I am currently working on extracting data from R/3 to BW. I read the several docs given in the forum and did the following:
1) In the LBWE transaction, my extract structure is already active.
2) In SBIW, i went to the filling of set up tables for QM
3) I executed the set up table extraction
4) Then, i checked in RSA3. The extraction was successful.
5) In BW, i replicated the datasource, and in the infopackage, i selected in the
      PROCESSING TAB, "PSA and then into Data targets (Package by Package)
6) In UPDATE tab, i selected FULL UPDATE
7) And then i did immediate load.
8) In RSMO, it showed successful. (It showed the same number of records as in the
      RSA3 of R/3)
          But when i went into the data target (ODS) and checked for its contents, nothing is visible. Why is it so? HAve i skipped any step? Please help.
Regards,
Neha Solanki

Hai,
       U r rite. It is an NW2004 system.This is what is displayed in the status tab in RSMO.
Data successfully updated
Diagnosis
The request has been updated successfully.
InfoSource : 2LIS_05_QE2
Data type : Transaction Data
Source system: QAS678
   And i can find no such button as u said.
Regards,
neha Solanki

Removing date stamp from photos

Some of my old photos were imported into iphoto with a date stamp from the camera/ Is there any way to remove this before I print them?? I have iphoto v 7.1.5 THANKS!

1 - it is good to go through the iPhoto Tutorials - http://www.apple.com/findouthow/photos/#retouch
2 - after you take the tutorials just play with it - Command-z will go back one edit - photos menu ==> revert to original will remove all edits and "revert to the original"
LN

NEF files from Nikon d800 not visible in bridge and photoshop cs6- using mac ver.10.8.5. downloaded plugin from site 8.3 but issue unresolved

NEF files from Nikon d800 not visible in bridge and photoshop cs6- using mac ver.10.8.5. downloaded plugin from site 8.3 but issue unresolved

You can install and use Camera Raw 8.8 with OSX 10.8 Go to Help > Updates in Photoshop CS6

Removing date stamps from photos

Hi,
Can anyone please advise if there is a quick and easy way to remove the date stamp from photos. My brother has a heap of great landscape shots he's taken over the years, however he has always had the date stamp set on his old camera - he knows better now and won't use it in the future. How do can he improve the quality of the photos he already has by removing the date?
Cheers

Use the magic extractor tool.
http://help.adobe.com/en_US/PhotoshopElements/8.0/Win/Using/WS083AC514-D907-483b-84A1-4EA3 989C4C65_WIN.html
But you need to do the same for each of your single image.
No way to do for all in one go except for resizing the images in one go via File->Process Multiple Files to that much size which can remove date stamps.
-Garry

How can i put a time/date stamp in Apple contacts, "Note"

how can i automatically put a time/date stamp in Apple contacts, "Note"
ei , when i enter a new note to a contact. I want the time and date to automatically show at each note.

This is not a feature in Contacts. I suggest you send Apple feedback to let them know you would like to see this option.
http://www.apple.com/feedback/macosx.html
You can easily add the date stamp using an app like TextExpander.
Read this article about using snippet keepers. http://www.macworld.com/article/151286/2010/05/clipboardmanagers word

Reports / intranet/ In some detail, the user will input a date range from and 2 and will out put the records in the int

Hello there,
I am totally green in web development.
my goal is to, for the user will input a date range from and
to and will out put the records in the intranet when they press a
button.
However, the good news is: I have experience in programming.
I have written applications for desktop in VB>NET and I
understand RDBMS /sql concepts .
But CF and WEB development is new to me.
My current projects involves in connecting to DB and testing
it. (it works fine)
And outputting reports by to a intranet page. (records)
i need help on how to start this asap. I will even do some
practice at home.
Tools I have at work
• Development server(test)
• Home site.
• Toad for db connection.
• Html reference guide
• Cf dummies book.
How can start my projects.
(ex. Create cf, outputpage?)
seriously, I am new to this.
Thanks.

Well, I had a really nice response with some concepts and
ideas for you to practise on etc, but these dumb forums timed out
and I lost it all
If you want to pop me an email we could probably do a few
exercises together that way - or even by MSN Messenger if you want.

Camera not visible in Finder

Just installed 10.5.1 and iPhoto update.
When I connect my camera to my iMac, iPhoto opens....but the camera is not visible in the Finder !
Any suggestions ? Or is this a new bug?
Best regards,
Roeland

You are asking about iPhoto on your Mac, right? And not about iPhoto on your IOS device? This is the iPhoto on IOS forum. I have asked the community hosts to relocate your post to the iLife iPhoto forum - you will get more help there.
What is your iPhoto version? Assuming you are having iPhoto '11, you'd should see the photos in the iPhoto Library package using the Finder, if they are there; but dont move them, only browse them, if you can find them.
Reveal your iPhoto Library and in the Finder; it is probably in your "Pictures" folder, ctrl-click it, select "Reveal Package Contents". In the Finder window that will pop up, select the "Masters" folder. This scores the original images, organized by the date of the "Import Session" o f the event.
If your images are still there, I'd copy - not move! - them to a folder on your Desktop and then try to rebuild the iPhoto library. Make a backup of the iPhoto library, then hold down the key combionation option-command and select "rebuild database" from the dialog that pops up.
Regards
Léonie

Data loaded in Infocube is not visible in the Reporting

Hi all,
In the info cube, the data is not visible for reporting, How can i make it available for reporting,
When i select the Manage option from the context menu of the cube and select the Requests Tab, i get a pop up message that tells
" There is an inconsistency between the load status of the data and the option of reporting on this data.
There is data in the InfoCube/ODS object that is OK from a quality point of view, but is not yet displayed in reporting.
The problem, for example, is to do with request 0000018049, number REQU_F4ZBFRMDGBULE9WCUN3R5UX5X."
How do i find out the inconsistancies?
PS: All the requesta are delta upload
There is no aggregates for this cube.
Thanks n regards
Girikumar

Hi Girikumar
Use the RSRV transaction and select All Elementary Tests in the dropdown ->Transaction data , select the Consistency of the Time Dimension for an InfoCube and select your cube and Execute the button ..if any error are there it will display the inconsistency ..Repair the Inconsistency with Correct Button..
Check the other test also ..
Hope the above helps you..\
Bye
Shu Moh..

Camera roll photos from new camera not showing in Apps

I got a new camera for Christmas which can transfer photos to my iPad via SamsungSmartCameraApp. This works ok, the photos show up in the Photos app, but they don't show up in other apps.
Eg. When I go to select photos to edit in Aviary, I can see all my other pictures, but not the ones transferred from my camera. It's the same in Facebook.
I have posted some of the photos to Facebook from Photos, but still couldn't select them from my camera roll in Facebook.
What's the problem, and how do I fix it?
I've tried editing the photos, thinking that might resave them as something normal, but no luck. I don't know what else to try.
I have an iPad mini, 12.7 GB, iOS 8.1.2. I can't find what version of Photos I have, but everything seems up to date. The camera is a Samsung WB200F.
Thanks for any advice you can offer

Providing it is the same app, you can download it again without being charged. It does not matter what price you paid (even if the app was free) - even if the app is no longer free this will be a free download.
To ensure it is the same app, go to (on your computer):
iTunes Store > Account > Purchase History
It's also possible that the app does not appear under the Apps tab if that app is not compatible with your iOS version.

CRVS2010 beta - Date field from database does not display in report

Hi there - can someone please help?!
I am getting a problem where a date field from the database does not display in the report viewer (It displays on my dev machine, but not on the client machines...details given below)
I upgraded to VS 2010
I am using the CRVS2010 Beta
My development machine is Windows 7 - and so is my fellow developer's
We are using Microsoft SQL Server 2000
We run the queries within VS and then we send the data table to VS using .SetDataSource
We have a few reports which display the date on our dev machines (whether we run the EXE or from within Visual Studio)
When we roll out to the client machines (running Windows XP SP3) then everything works, except that the date does not display (on quite a few reports)
This is the only real issue I have had - a show stopper for me
The rest works well - any input will be greatly appreciated
Regards,
Ridwan

Hi Ridwan,
After much testing I have it all working now using CRDB_adoplus.dll as a data source ( XML )
Alter your Config file to look like this:
<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0"/>
</startup>
Then using the code below, and CR requires the Schema to be able to read the date format.
private void SetToXML_Click(object sender, EventArgs e)
CrystalDecisions.CrystalReports.Engine.ReportDocument rpt = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
ISCDReportClientDocument rcd;
rcd = rptClientDoc;
string connString = "Provider=SQLOLEDB;Data Source=dwcb12003;Database=xtreme;User ID=sb;Password=password";
string sqlString = "Select * From Orders";
OleDbConnection oleConn = new OleDbConnection(connString);
OleDbDataAdapter oleAdapter = new OleDbDataAdapter(sqlString, oleConn);
//OleDbDataAdapter oleAdapter2 = new OleDbDataAdapter(sqlString2, oleConn);
DataTable dt1 = new DataTable("Orders");
oleAdapter.Fill(dt1);
System.Data.DataSet ds = new System.Data.DataSet();
// We need the schema to get the data formats
ds.WriteXml("c:
sc.xml", XmlWriteMode.WriteSchema);
//Create a new Database Table to replace the reports current table.
CrystalDecisions.ReportAppServer.DataDefModel.Table boTable = new CrystalDecisions.ReportAppServer.DataDefModel.Table();
//boMainPropertyBag: These hold the attributes of the tables ConnectionInfo object
PropertyBag boMainPropertyBag = new PropertyBag();
//boInnerPropertyBag: These hold the attributes for the QE_LogonProperties
//In the main property bag (boMainPropertyBag)
PropertyBag boInnerPropertyBag = new PropertyBag();
//Set the attributes for the boInnerPropertyBag
boInnerPropertyBag.Add("File Path ", @"C:\sc.xml");
boInnerPropertyBag.Add("Internal Connection ID", "{680eee31-a16e-4f48-8efa-8765193dccdd}");
//Set the attributes for the boMainPropertyBag
boMainPropertyBag.Add("Database DLL", "crdb_adoplus.dll");
boMainPropertyBag.Add("QE_DatabaseName", "");
boMainPropertyBag.Add("QE_DatabaseType", "");
//Add the QE_LogonProperties we set in the boInnerPropertyBag Object
boMainPropertyBag.Add("QE_LogonProperties", boInnerPropertyBag);
boMainPropertyBag.Add("QE_ServerDescription", "NewDataSet");
boMainPropertyBag.Add("QE_SQLDB", "False");
boMainPropertyBag.Add("SSO Enabled", "False");
//Create a new ConnectionInfo object
CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo boConnectionInfo =
new CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo();
//Pass the database properties to a connection info object
boConnectionInfo.Attributes = boMainPropertyBag;
//Set the connection kind
boConnectionInfo.Kind = CrConnectionInfoKindEnum.crConnectionInfoKindCRQE;
//*EDIT* Set the User Name and Password if required.
boConnectionInfo.UserName = "";
boConnectionInfo.Password = "";
//Pass the connection information to the table
boTable.ConnectionInfo = boConnectionInfo;
//Get the Database Tables Collection for your report
CrystalDecisions.ReportAppServer.DataDefModel.Tables boTables;
boTables = rptClientDoc.DatabaseController.Database.Tables;
//For each table in the report:
// - Set the Table Name properties.
// - Set the table location in the report to use the new modified table
boTable.Name = "Orders";
boTable.QualifiedName = "Orders";
boTable.Alias = "Orders";
rptClientDoc.DatabaseController.SetTableLocation(boTables[0], boTable);
//Verify the database after adding substituting the new table.
//To ensure that the table updates properly when adding Command tables or Stored Procedures.
rptClientDoc.VerifyDatabase();
MessageBox.Show("Data Source Set", "RAS", MessageBoxButtons.OK, MessageBoxIcon.Information);
Thanks again
Don

Sh.Cart created from PR - but not visible in SOCO(MaterialsHas MRPview)

Hi,
We are in SRM 7.0 Classic scenario - EhP4 - Using ECC-PI-SRM route to transfer docs.
When a PR is created with materials which has MRP1 view with MRP Type value 'ND - no mrp' .... transfered to central system - Shopping cart is getting created. Issue is : this Shopping cart is not displayed in Assign sources of Supply(SOCO) screen.
Shopping carts with PR's containing materials without MRP view are displayed in Assign Sources of supply(SOCO) screen.
We are creating RFx from Assign sources of supply screen by selecting the Shopping carts .
Pls suggest as how to make the "Shopping carts from PRs having materials with MRP view" available in SOCO.
Thanks,
Ashwin.

This is little work around FM BBP_PDH_DB_DIRECT_UPDATE By using this FM you can can forcely send them to cockpit. but SAP has to do automatically .
Create ONE oss message under SRM-EBP-EXR
It may not happen due to your master data as you expected. let us wait for SAP reply ..
Question:
Why has my shopping cart not come to the Sourcing Cockpit ?
Answer:
Whether or not a shopping cart/external requirement goes to the Sourcing cockpit depends on the customizing SPRO settings for Define Product Categories for Sourcing (see attachment).
Here there are the following options:
Sourcing Always carried out
Sourcing Never carried out
Sourcing carried out for items withour Assd Source of supply
Aut. creation of Bid Inv for items w/o source of supply
Aut. Grouping. Sourcing for items withour source
Aut. Grouping, sourcing is never carried out
Aut. Grouping, and creation of Bid Inv w/o source
The technical field to check is : BBP_PDIGP-SOURCE_REL_IND

Importing just a few pics from the camera, not all

Hey guys,
I'm brand new to iPhoto and i want to just bring in a few pics from my camera but right now I can only bring in all of them (200 pics). Does iPhoto really not do this?
Thanks

Jordy:
There are two ways.
1 - use Image Capture, located in the Applications folder. You can preview the thumbnails and upload selected photos to the desktop from where you can import into iPhoto.
2 - once you get the camera mounted in iPhoto hit the Return key twice. The Edit window will come up with the thumbnails in the photo bin at the top. However the thumbnails will be blank but you can see the photo in the main edit window where you can drag it onto the Library icon or an album icon to import. You can only import one at a time and see one at a time. It works but is very slow. #1 would be my choice and it would be quick and you'd be much less susceptible to auto-shutdown by the camera due to a low battery which can have bad results.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.

USB/directshow camera not visible in max/imaqdx

I've got a Chameleon USB2.0 camera from Point Grey and I'm having problems getting it to show up in MAX.
I'm running a fresh installation of labview 2012, MAX 5.3.3f2, IMAQdx 4.0, IMAQ 4.7 on a windows 7 x64 lenovo T420 laptop.
I'm aware of the problems with registering the DirectShow filters for the Point Grey cameras: http://digital.ni.com/public.nsf/allkb/7DF278AF77461951862579AD0063B9AD
I've tried all of the various driver versions from Point Grey, and currently have installed the v2.4 x86 version
The camera is visible using AMcap, a lightweight DirectShow viewer, so it seems that the camera is operational and the DirectShow interface is functional.
I had an older version of Labview installed, and the camera was visible in MAX. I wanted to upgrade versions but didn't use the NI update service and just downloaded the various files from the website. About the time I upgraded MAX to 5.3 the camera disappeared from MAX. I assumed some problem with the upgrade, so I completely uninstalled both Labview and the camera drivers and tried a fresh installation, but I still can't see the camera in MAX.
Any ideas about how to get my camera to show up in MAX?
Thanks!

Did you find anything? I have two Mightex USB cameras hooked up and believe that I might be having the same problem.
I can actually get both devices to show up in AMCAP, but the 2nd camera that I have hooked up to the computer doesn't show up in NI-MAX.
I have spoken with the camera manufacturer and they have verified that these DirectShow drivers have worked on old versions of LabVIEW. Please get back to me if you know anything regarding this error.

Add 90s date stamp from "date created" to photos

Hi
I'm about to order a photobook (christmas gift for some relatives). The book have nearly 300 pictures in it,
The pictures need to have dates. I could add a date manually for each picture but I havent really got time for it.
All photos have proper exif data, with date created info. Does anyone know how i can just destructivly stamp
this on to the photo itself? Bit of a odd problem, I don't think bridge/ps can do this with its default
functionality - but I know I have seen this feature somewhere sometime in some software product!
And yes I know date stamps look terrible, but most of the family photos arent exactly fine art to begin with :>
Any tips appreciated, it would be a huge time saver for me!

It can be done with a Photoshop Script that adda a text layer usinf the date in the EXIF. An example is my stampexif script. It adds a text layer which can be used within an action then the added text layer can be positioned and styled by the action. The script would be easy to change and format the text content to your likeing.
Link to the script http://www.mouseprints.net/old/dpr/StampExif.jsx

Date stamp from mDV camera not visible on viewer , nor recorded.

Similar Messages

Maybe you are looking for