Date - Time auto update after login on portal

Hello,
I have portal server 71. update 2 installed.
the date and time which is shown after login gets updated on refresh only.
is it the default behaviour? yes then what can be done to update automatically?
regards,
sumant

yeh i know that.
however i thoght sun must have provisioned that atleast.
let see how i can manage. :)
thanks
sumant

Similar Messages

Problem with Date & Time Auto Update

Hi everyone,
I have been experiencing a date & time issue with my MacBook Air. (I am running 10.5.5 with all the latest software updates except for iTunes 8). Here's what's going on:
Under the Date & Time preferences, whenever I try to check the box for "Set date & time automatically", the date and time do not update. I thought Norton might be the culprit in this case, but I have thoroughly uninstalled it, and this problem still persists. (I am actually borrowing this laptop for work, so I don't know if someone else possibly did something weird to it before I started using it. As far as I can remember, I've always had this problem -- the automatic setting has never worked.)
I am connected to the internet when I do this, and I already have my time zone selected. Am I missing something obvious here?
I apologize if this issue has been brought up before, but I did a lot of searching and couldn't find anything. Any suggestions would be greatly appreciated!!
Thank you.

whenever I try to check the box for "Set date & time automatically"
You check it and the time does not update, or you try to check it and it doesn't show a little tick mark?
Try it with Console.app open and see does it report any errors. Try changing the time server.
AK

How can I set the insert date to auto update in Pages 5.2.2

how can I set the insert date to auto update in Pages 5.2.2
I am attempting to have the date in header auto update in a Pages file.
I can insert it, but where is the AUTO UPDATE selection
OS10.9.4
thank you

Apple never included the auto-update feature for dates in Pages v5.2.2. You would have to single-click the date, and deliberately update it.
If you have Pages ’09 v4.3 in /Applications/iWork '09, then it will allow you to configure auto-update of the date field. Right-click on the date, set the format, and click the selection for automatically update on open.

"In the Data Palette window, drag the Login to Portal portlet ..."?

Hi;
In http://e-docs.bea.com/workshop/docs81/doc/en/portal/samples/login.html?skipReload=true it says "In the Data Palette window, drag the Login to Portal portlet onto a placeholder on the page. "What does this mean and how do I do it?
And the following line is "In the Property Editor window, set any relevant properties." - where is the property window and what properties do I want to set and to what value?
thanks - dave

Help please
thanks - dave

Nokia S60v3 time auto update bug

**NOTE: You will ONLY see this bug if you live in USA where there is no DST**
I live in Phoenix (Arizona) and there is no day light savings here i.e. MST+NO DST or they also call it "Arizona time (GMT-7hr)".
When i bought N95-1 in April 2007, i had set the phone to auto update based on network time. It would always report +1 hour of my actual time i.e. 7:00PM when the actual time was 6:00PM. I did all sorts of debugging (changing sims,trying AT&T vs T-mobile sims, firmware updates) but no success and i ended up disabling network time and set the time manually on my phone which is not nice if you travel between time zones. My current sim would report correct time on my wife's Treo-680 & Motorola Razor. Later i bought N95-3, same problem!
Then i was surprised to see my friend with Nokia N80 had exactly the same problem here in Phoenix so now at least i knew i was not doing something stupid.
I finally nailed it that it is bug in Nokia phone software because after first Sunday of November (11/04/2007) when DST end in USA and we revert to standard time the Auto update feature started reporting correct time and is working properly now. And i bet after the second Sunday in March (i.e. on 9 March 08) when DST kicks in, it would go bad again to +1 hour offset.
Nokia needs to fix this bug.
Nokia N97 NAM

I do not believe this is network operator issue. if that were the case, then it should break other phones as well. As far as I've been able to determine, looking at other Nokia, Sony Ericsson, LG, and Motorola phones, this isn't the case. They all work fine. Actually my Nokia 6270 works fine on the SAME operator and on the SAME sim card!!
Another point is that i even tried other operator SIM cards into my N95 and it is always the Nokia and not the operator. I can also say this with confidence that the issue is not only N series but also the E series device that have S60v3 or higher
I am not the first to report this. Here is another thread and towards the end it seems Nokia knows about this. Which makes me even more mad!
http://forums.cingular.com/cng/board/message?board.id=nokia&message.id=42541
Nokia N97 NAM

Reg System Date & Time by default on login page

Hi,
I need to know if we can display default date and time on Login Page and other Views in WDA..?
This is just beautification issue but if it can be resolved, it would enhance my credential.
Thanks.
Kumar Saurav.

Hi Kumar,
You can declare a Node in Comp controller and set this Node by Sydatum & syuzeit. Now you can fetch this node in any view or you can declare a Global attribute of type ELEMENT_<Context Node Name> and get this aatribute in any view using WD_COMP_CONTROLLER-><Attribute Name>.
Also can you explain your requirement for Date & time field on Login Page?
Hope it helps you.

Date + Time question updating to a DATE field..

Hi,
I'm going crazy...
MEETING_DATE is a DATE column in the DB
:P40_MEETING_DATE is a TEXT FIELD with source MEETING_DATE
:P40_MEETING_DATE:=to_char(to_date('02-OCT-2006 09:14:45 PM','DD-MON-YYYY HH:MI:SS PM'),'DD-MON-YYYY HH24:MI:SS');
Ultimately I need to have :P40_MEETING_DATE a date picker and then
add a character string of a time to it.
:P40_MEETING_DATE:=to_date(to_char(:P40_MEETING_DATE,'date picker format?')||' '||:P40_START_TIME,'date picker format?');
I get all kinds of errors ORA-01858 errors.. non- numeric errors.. invalid month errors..
Bill

You are right, sorry about that.
I thought about sneaking a On Submit - After Computations and Validations process in there before the Process Row process like this:
:P216_X := TO_DATE( TRUNC( TO_DATE( :P216_X, 'DD-MON-YY HH24:MI' ) ) || ' ' || :P216_TIME, 'DD-MON-YY HH24:MI' );but that's probably the same thing you tried before.
I would just turn it into a procedure and pass the parameters...;)
I hope someone can get your going in the right direction.
chet

Actual end date is not update after closing a change

Hi,
We are using SCSM 2012, now I want to make report on which changes have been closed in the last month. In som way all the changes that have been closed in SCSM do not have an actual end date, all the changes that I have imported from our old tool does. It
looks like SCSM does not update this field by itself, but I can't find a field in the change managment module in which I can provide the actual end date.
How does SCSM 2012 copes with this?
Kind regards, Marco Jansen

Hi Greg,
We are actually testing this now, as MS is not planning to solve this issue on a short term. The use of the last modified date is casuing u a lot of trouble now as we have had an change on our change form casuingthe last modified for all change to be set
to the date of the change. That was the end of my closing data.
We are now getting the WA in place from Netviaconsulting, but that is not a complete solution. Not all change reach a state of complete before they are closed. Sometime you will close a change that is cancelled ,rejected or failed. this means that when
triggering on an update of the record every update will set the actual enddate. Besides when setting the actual enddate on the status closed, the date is update every time the worflow runs.
We just want the actual enddate to be filled when a change comes to the status closed from any other status, but this sets the actual enddate on every status change of the change. in some strange way ewe cannot figure this out.
If anybody has the correct configuration for this workflow it would be very useful. Most prefereably MicroSoft in this case.

BIA Master Data Index Not Updated After Change Run

In BIA it shows master data 0VERSION table /BI0/SVERSION has 360 records which matches with the number of entries in SE16 /BI0/SVERSION. One record was added to 0VERSION so now SE16 /BI0/SVERSION shows 361 records. I did a change run for this infoobject 0VERSION but the BIA index for /BI0/SVERSION still only show 360 records. I expect it to show 361 records after the change run. Is this a bug? Thanks.

Hi Thao,
I see one of 3 possible scenarios:
1) You load 0VERSION as a part of master data load (from flat file or another system). You see your 11th record in version "M" after load and then you run change run that makes "A" version of the record. ---> BIA index should be automatically updated. If not - open OSS message to SAP.
2) You load transactional data in an InfoCube, and it has new value for characteristic 0VERSION. ---> In this case you need to run roll-up of this new load request in the InfoCube to let BIA index be in-sync.
3) You are modifying 0VERSION manually (e.g. SQL INSERT statement), so system is not aware of new record at all. ---> You need to run the mentioned single-table-index program to update BIA index.
Is it any of these 3 scenarios, or you have the 4th one?
Regards,
-Vitaliy
Edited by: Vitaliy on Aug 19, 2008 1:59 PM

QuickTime auto update after Sysprep in Windows 7

Hello all,
My orginization is in the process of developing and deploying Windows 7 images. We used to customized the Default User profile in Windows XP and when users logged in all their settings would be pre-customized so there were no update notifications or terms of agreement. The PCs are also frozen using DeepFreeze so updates would just be a nuisance.
One thing that does not transfer over in the CopyProfile phase of Sysprep is the "Do not automatically update Quicktime" setting. I uncheck the box on my base image and after the profile copies the box is checked back on for all new users.
The Java application also had this problem but I solved it by disabling JavaUpdate in the registry.
I have read up and it seems that copying the .QTP file with all the QuickTime preferences is one solution but is that file present in the Default profile on a Windows 7 environment?
Is their a registry value to change to disable update?
Does removing Apple Software Update disallow QuickTime updates?
Thank you in advance,
SMCC IT Staff

Well, I solved it!
Thanks to a YouTube video showing the correct registry keys to change I added the following commands to my Sysprep file:
     7 (oobeSystem)
          x86/amd64-Microsoft-Windows-Shell-Setup_6.1.7600.16385_neutral
                    FirstLogonCommands.
Check out this post out for details on how to setup a Sysprep answer file.
reg.exe load HKEY_USERS\TempHive "C:\Users\Default\NTUSER.DAT"
     (Loads the DefaultUser's NTUSER.DAT file into Registry Editor)
reg.exe DELETE "HKEY_Users\TempHive\Software\Apple Computer, Inc.\QuickTime\LocalUserPreferences" /v FolderPath /f
     (Deletes the incorrect value set by Sysprep (the value is pointing to the Administrator profile)
reg.exe ADD "HKEY_Users\TempHive\Software\Apple Computer, Inc.\QuickTime\LocalUserPreferences" /v FolderPath /t REG_SZ
     (Adds a blank value)
reg.exe unload HKEY_USERS\TempHive
     (Unloads the NTUSER.DAT file)
When a new user logs in the QuickTime folder path defaults to the new users profile: preferences set in the reference profile are copied, just like what happened in XP, and the browser plugin works correctly.
Let me know if you have any questions.
Yay!
Scott

Concatenate date time and update SQL datetime field

I have a form that captures date and time in 2 separate fields data and time.
I need to combine these fileds and UPDATE a SQL database (datetime field)
The date field is passed like this DSDATE={ts '2013-11-18 00:00:00'}
The time field is passed like this TIME_IN1=14:05
How do I concatenate DSDATE AND TIME_IN1 so that I can insert like this 2013-11-18 14:05:00.000 ?

The easiest way may be the best. You judge.
<cfset DSDATE = parsedatetime('2013-11-18')>
<cfset TIME_IN1="14:05">
<cfset yr = year(DSDATE)>
<cfset mnth = month(DSDATE)>
<cfset d = day(DSDATE)>
<cfset hr = listGetAt(TIME_IN1,1,":")>
<cfset mn = listGetAt(TIME_IN1,2,":")>
<cfset datetime=createdatetime(yr,mnth,d,hr,mn,0)>
<cfoutput>#datetime#</cfoutput>

Updating table with Modified date/time when updating any row

Hi guys,
What I am trying to do is this. I have a several rows in my table, alongwith the field 'Modified_date'. I want to insert a modified_date if and when I update the row in the table. Here's my code, but it's not working:
PROCEDURE ip_maint_save (p_submit IN VARCHAR2 DEFAULT NULL ,
p_user_no IN varchar_array_type,
p_user_id IN varchar_array_type,
p_ip_first IN varchar_array_type,
p_ip_last IN varchar_array_type,
p_user_type IN varchar_array_type,
p_user_language IN varchar_array_type,
p_blue_jays IN varchar_array_type,
p_created_by IN varchar_array_type,
p_modified_by IN varchar_array_type,
p_modified_date IN DATE := SYSDATE
IS
v_count_rec PLS_INTEGER := 0;
BEGIN
FOR i IN NVL (p_user_no.FIRST, 1) .. NVL (p_user_no.LAST, 0) LOOP
IF p_user_id (i) IS NOT NULL THEN
BEGIN
UPDATE IP_MAP
SET IP_FIRST = p_ip_first (i),
IP_LAST = p_ip_last (i),
USER_ID = p_user_id (i),
USER_TYPE = p_user_type (i),
USER_language = p_user_language (i),
IP_FIRST_number = Mr_Ip_Maint.ip_to_number (p_ip_first (i)),
IP_LAST_number = Mr_Ip_Maint.ip_to_number (p_ip_last (i)),
MODIFIED_DATE = p_modified_date (i)
WHERE USER_NO = p_user_no (i);
.....rest of the code/exceptions follow....
It's not working. Although, I am able to update a row, but it's not inserting/updating the modified_date field in the table for which the row is updated.
Thanks in advance.

Hi,
As per my understanding, you are passing many values at a time to be updated using varchar_array_type type. In such scenario if your User_no is 100,101,102 all are being looped and the table is updated. But where are you checking the updated field or on what bases you will come to know that this particular field is updated.
I will suggest you to use before update triggers. As in triggers you can check the rows old and new value and then set sysdate for modified_date column.
Something like this,
create or replace trigger trg_IP_MAP on IP_MAP
before update
For Each Row
Begin
     If (:OLD.IP_FIRST != :NEW.IP_FIRST OR
          :OLD.IP_LAST != :NEW.USER_ID OR
          :OLD.USER_TYPE != :NEW.USER_TYPE OR
          :OLD.USER_language != :NEW.USER_language OR
          :OLD.IP_FIRST_number !=:NEW.IP_FIRST_number OR
          :OLD.IP_LAST_number != :NEW.IP_LAST_number) THEN
               :NEW.MODIFIED_DATE = SYSDATE
     END IF;
END;Twinkle

Header batch manufacturing date to be update after 261 movt of any compane

Dear all ,
we have one requirment in that ....suppose we have one Process order , we done companent batch determiantion
now what happens whenever we do confirmation ..means 101 then Manufacturing date at Header bacth updates , ( the 101 date is set as Manufacturing date. ...Now when we do picking i.e goods issue of any companenet under order , that date shud
be there as manufacturing date for that header batch .
pls suggest.
Regards,
Prerna

Hi Prena,
Could you please post your solution how you acheived this? I have the similar requirement to populate batch manufacturibng date as process order confirmation date.
Your help is appritiated.
Thanks,
Jyoti

Start Menu Not Auto Updating After Installation of New Applications

// Also reported via Windows Feedback Tool //
After the installation of several applications, the new Start Menu does not necessarily automatically update to reflect the added programs.
The application’s folder is properly installed under C:\ProgramData\Microsoft\Windows\Start Menu\Programs, but it will not show under the Start Menu until the user logs out and logs in.
Interestingly enough, this behavior is not consistent. Some applications installations are immediately reflected while others are not.
In this particular example, LibreOffice 4.3 was installed.

Hi @Senttu
Thank you for your reply.
You can try running the file checker to look for and try to repair corrupted files.
Go to the command prompt.
Right click and run as administrator.
Type sfc /scannow and press enter.
You can also try using the Windows troubleshooter. Diagnose and repair Windows File and Folder Problems automatically.
If the issue should still remain, I suggest contacting MIcrosoft for assistance.
Microsoft Corporation Customer Service 1 800 642 7676 or Microsoft Contac Us website.
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Time not updating after upgrade

I have upgraded to the new operating system but the time on the top left bar stopped updating.

thanks for looking into this and sorry for coming back only now. the issue is resolved opening activity monitor and quiting hi usage process. its a bug (another one) that needs to be ironed out...

Date - Time auto update after login on portal

Similar Messages

Maybe you are looking for