Date/time changes in maintenance order

Hello,
We are using strategy plans to generate maintenance orders. Is there a way to change the basic start and end date and times of the order? The scheduling type is Forward with time. I want to be able to change the start date to the date of generating the order and the end date as the end of the maintenance cycle. How can this be accomplished?
I have checked out exit IWO10012 but it does not get called from IP10.
Thank you,
Nithya

Hi,
I do not want to change the planned date of the maintenance plan, which is what the exit IPRM0002 does. I want to influence the basic start and end date of the order that is generated based on my call horizon.
Even if I set the initial and subsequent buffer in the maintenance package, both dates still come as the same. How do I change the end date to reflect the end of the maintenance cycle.
Any pointers anyone?
Thanks much!
Nithya

Similar Messages

Report for basic dates change in maintenance order

Dear friends,
Client requirement is to see the orders for which basic dates have been changed. The scenario is when preventive maintenance is done , if the work cannot be done on the date(basic date in maintenanc eorder), the basic date is changed for a convenient time. They want to have a report showing all the ordres for which the basic dates have been changed and the changed dates detail( ie. initial basic date, changed basic dates).
best regds
Arun

Once you get the Change Document header data from CDHDR you will then need to get the change details from CDPOS.
Have a look at program RSSCD200 via TCode SE38.
There may well be a suitable function module for this...
PeteA

Approved from/to Date Permit in a maintenance order IPM2

Hy.
In the list of permits for maintenance orders (transaction IPM2) appears two fields:
    - Approved from Date: Date from which the permit is valid as being issued
    - Approved to Date: Date untill which the permit is valid.
But I am not able to change these values. Do anyone knows how is possible to add these information to a permit?
Thanks for your help.

Hi
1.     Depending on the application component in which you are working, choose one of the following menu paths:
        Logistics ---> Plant maintenance -> Management of technical objects / Maintenance processing> Environment> Permits
        Logistics ---> Customer service -
> Management of technical objects / Service processing ->Environment-> Permits
The overview of all the permits appears.
2.    Select the required permit and choose Details.
3.    Make changes as required and save the permit.
Technical name: SAP_PM_EQM_PERMITS_ISSUE_DISPL
This role contains all the functions that you require to issue and display permits
The following activities for permits are available with this role:
Changing a permit
Displaying a permit
Regards from Pakistan
Edited by: Saif Ali Sabri on Jan 15, 2010 12:35 PM

Basic and scheduling dates & time calculation in process order creation

Hi guru's,
i have one requirement, i need to calculate and display the basic and scheduled dates & times based on the given input i.e material , plant , process order type , quantity , UOM and scheduling type ( for corresponding scheduling type user will provide either start date or finish date ) using RFC. can u plz provide any function module for this purpose or logic for calculating the same , as i am working on version 4.7ee .
Awaiting for a quick response.
Regards,
Madan

Dear Rohan,
1.Check the length of break timings defined in the resource that is assigned in the phase.
2.Check in OPUZ whether for the process order type and plant combination whether scheduling is to include the break time also
(whether the check box for scheduling with breaks) is included.
Check and revert back.
Regards
Mangalraj.S

IPhoto Batch Date/Time change Suggestion

I recently traveled overseas with my family to a time zone that was +4:30 from my current location. During our trip I took 800+ photographs from my digital camera, 60+ from my iPhone and lots of video from my camcorder. It didn't occur to me until I got back home that not only did I not set the digital and camcorder to the local time where I was vacationing but also my digital camera had somehow been set 2-days back but with the correct home time. So it was actually 2days 4hours and 30minutes behind the time that it should have been. My iPhone photographs were fine because I set it to the local time as soon as I landed there.
Once I synced my camera & phone photographs I realized my problem as my entire vacation was in a jumbled mess. So then I went through the photographs and split the digital camera and iPhone photographs into 2 albums which was not too hard. Thereafter, I went through the digital camera photographs and adjusted the date/time stamp. Some of them I could do in batches, which is not very easy as you need to look at the current date/time stamp, then select the photographs you want to change and then do the math before making the change. The most of it I had to do individually to make sure they wouldn't get jumbled with the iPhone photographs I had taken. So to say the least, to adjust 800+ photographs took a long time and a lot of effort.
My suggestion is a simple batch change like what is available already, but with the option to advance or regress the date/time stamp letting the system use the current date/time stamp.

That command is the adjust time/date command - not the batch change command
Adjust T/D takes a group of selected photos and applies a constant delta to them thereby correcting for camera setting errors or time zone issues
Also note that this is a user to user support forum not a path to Apple - it is a great plce for questions about how iPhoto works - it is an extremely poor place to make requests for changes since there is no one here who can do that.
LN

Can't configure date/Time Change by command in W7

Hello,
I need to synchronize all my computers, we got a program who does that (and it works), but not on Windows 7.
Doing a research I found that is for the administrator privileges. I assume there are two ways for solving my issue.
1) Launch the command as administrator.
2) Change the privileges of who can change the date/time.
About 1), I haven't found nothing of how I can launch it as administrator by program. I know I can do right click and "Launch as administrator" but I need to do it without a mouse and keyboard.
About 2), I already did this: Edit Group Policy/Local Policy/User Rights Assignment/Change the system Time. And I set it to "All Users". But it doesn't work.Yes, I reboot after changes.
Any help will be appreciated.
Thank you.

Hi Gustavo,
If you mean to synchronize time in Windows 7 and assume we are in a domain environment, the first blog shared by britishdhez is a good reference.
For more information, see:
Configure a client computer for automatic domain time synchronization
http://technet.microsoft.com/en-us/library/cc758905(WS.10).aspx
I am not sure which software you are using, if it won't work, please consider contact the vendor support. About running command with admin rights, you may have insterests in the following blog:
Creating a Self-Elevating Script
http://blogs.technet.com/b/elevationpowertoys/archive/2010/06/20/creating-a-self-elevating-script.aspx
If any further help needed, please feel free to post back.
Best regards
Michael Shao
TechNet Community Support

Date & Time changed by itself - VIRUS ?

Wonder if anyone of you can understand this strange behaviour.
When I boot up this morning (not connected to Internet yet - Airport off, no internet connection), I have the following messages:
1. A series of 4 messages asking to "Deny" or "Allow" 4 programs requests - can't remember the exact request but the Help screen (smaller question mark at bottom left corner) explained the programs are asking for something. The programs have names of 4 to 5 letters something like "pbkp" etc Note. just an illustration not the exact name. Forgot to write them down.
2. One message warning my computer date and time set to sometime in 2008 !!!
I did the following:
1. Clicked "Deny" to all four requests.
2. Go to System Preferences - Date & Time was set to "Set date and time automatically" - but the date and time was changed to above.
I then connect to Internet - the date and time were reset automatically to the correct date and time.
It is now more than 10 hours since and I have no problems.
But, should I be concern with:
1. why the date and time was changed?
2. the appearing of the 4 messages?
I understand we should not get viruses with Mac.
Is there anything I should do to cleanse the computer?
Note:
2 days earlier I did received an email on Google mail and I inadvertently clicked on the link which led to a site to buy medicine and the like. I immediately close the site and thrashed the mail.
COuld this be the problem?

1. A series of 4 messages asking to "Deny" or "Allow" 4 programs requests - can't remember the exact request but the Help screen (smaller question mark at bottom left corner) explained the programs are asking for something. The programs have names of 4 to 5 letters something like "pbkp" etc Note. just an illustration not the exact name. Forgot to write them down.
This may just be keychain requests to allow access to password protected information.
2. Go to System Preferences - Date & Time was set to "Set date and time automatically" - but the date and time was changed to above.
It will only set automatically if it is conencted to the Net.
2 days earlier I did received an email on Google mail and I inadvertently clicked on the link which led to a site to buy medicine and the like. I immediately close the site and thrashed the mail.
On a PC I'd be more worried about this, but it is possible you may be one of the few to have managed to get affected by a trojan horse, not a virus. A virus can act without any action by the user. A trojan horse only reacts to user requests. It is possible that part of this e-mail actually was to present a series of deny/allow requests. If you are the administrative user of the computer or have authorized the program with your password to act on your machine, you could in fact have allowed a trojan horse to run. But without giving the machine your password, there is very little a program can do to impact the computer.
Never open an e-mail you don't recognize. That's lesson number one. If your friends and family send you an e-mail, make sure they indicate in the subject line what they are writing about. This will avoid you confusing it for something else.
If you aren't expecting an e-mail, don't open it.

Date & time change frequently on startup. antivirus stops working also.

For the past month the date & time are changed when I start my computer, an HP Pavilion Elite m9077c with Vista.It doesn't happen everytime, but about 2/3 of the time. I can't download my email until the date is corrected, I get onscreen messeges that Windows media player won't work, & the status of Norton antivirus is frequently changed to "not protected". After restoring the correct date everything seems OK. What is going on? Is this the cms battery going bad , does my computer have a virus?When I run the Hardware diagnostic tool in the PC help & tools folder I get no indication that the cms battery is bad.

tk797,
As the CMOS battery is supposed to retain date and time, and that is the issue, I would replace it.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph04375&cc=us&dlc=en&lc=en&product=3624429&tmp_...
http://www.computerhope.com/issues/ch000239.htm
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Date & Time changed when sync

When I connected my touch to PC, and sync, touch's date & time would change to a early date & time, most of time this would happen.
Is there anyone knows what happens?
Thanks!!

Hello
this is a common problem with the ipod touch. I have it, and many others on the forum have it. It's nothing to do with the ipod, so restoring it will do nothing.
some think that it is quicktime, others itunes.
The only way i have found to stop it is to only plug the ipod in while itunes is closed.
thanks

Iphoto: unwanted date/time change after import

Two problems:
First Problem: In October, 2012, scanned a photo into my MacMini in JPEG format. Creation date 10.12.2012 , Modified date 10.12.2012. This is OK.
This is an old family Christmas photo, so I use "touch -t" command through the Terminal application to change Creation and Modified dates to 12.25.1957 at 2PM (1400.00 hours). Use Finder/Get Info to check date of JPEG file and confirm change of date and time.
Then, import JPEG file into iPhoto: iPhoto shows date of JPEG file as 12.25.1957, but time is now 3:34.02PM (1534.02 hours). Use File/View in Finder to look at iPhoto file and discover that date and time are changed to 12/31/1969 at 7:00 PM (1900.00 hours). What's going on here?
Second Problem: Received a JPEG file by email and moved it to the Desktop.   Creation date and Modifed date of the file are the date and time they were downloaded from email onto my MacMini, which is today: 1/30/2012 at 11:30AM.   Use "touch -t" command through Terminal application to change Creation and Modified dates and times to 10/20/2012 at 6PM (which is when the picture was actually taken). Comfirm change through use of Finder/Get Info capability.
Import JPEG file into iPhoto and time gets changed to 7:34PM (date stays 10/20/2012).   Look at File/Reveal in Finder and the dates are still the date and time of the download from email onto my computer. What gives?
Iphoto version is 9.4.2. All system software up-to-date.

That command is the adjust time/date command - not the batch change command
Adjust T/D takes a group of selected photos and applies a constant delta to them thereby correcting for camera setting errors or time zone issues
Also note that this is a user to user support forum not a path to Apple - it is a great plce for questions about how iPhoto works - it is an extremely poor place to make requests for changes since there is no one here who can do that.
LN

Date format when printing Maintenance Order

Dear Colleagues
When I print a Work Order, I'm getting the date format as DD-MM-YYYY
I know that I can change this format in the User Parameters, however I need to modify a huge number of users.
Question 1) Is there a way to setup the date format independent of the user parameters?
Question 2) I'd like to have the date like this: JAN-01-2010. But I don't have this option in the User Parameters. Do you know how can I do it?
Thank you for your help

Davison,
Its not possible using user settings. All you would need to do is copy the SAP SCRIPTForm program(You can keep the Print program as such) and set date mask as required in SAP script text editor using command
/: SET DATE MASK = 'MMMM DD, YYYY'
Now the date variable value written out on the screen would be
&DATE& -> JAN 01, 2010
You could revert to standard settings using command
/: SET DATE MASK = ' '
Regards
Narasimhan

Date & Time changing??

OK, I have had this previously used PB (1.67GHz) for about a year now. Recently, it spontaneously powers down, and when I power it back up, the date and time are switched back to 7:00 PM, Wed, Dec. 31, 1969. There isn't a pattern to this; it seems completely random.
Any suggestions on why this is happening and how to fix it are welcome and appreciated!
PowerBook G4~Green iMac G3~Blue iPod mini~Black 30 GB iPod with video~ Mac OS X (10.4.9)

As well as the main battery in your PB, there is another that maintains system data, including something called PRAM (and that carries the data and time). You'll need to replace that battery, sometimes called the backup battery.
Check out the following two pages:
http://docs.info.apple.com/article.html?artnum=11751
http://docs.info.apple.com/article.html?artnum=86181
Which you need depends on the age of your machine.
Those pages will tell you which battery you need. It's an easy job to replace yourself but an Apple dealer or even a Mom & Pop computer shop will change it for you at reasonable cost.
Pete

Tracking the Date time changes in DatePicker control using Javascript/JQuery

I have two date picker controls(Start Date nd End Date) in my SharePoint Calendar list. And I need to calculate the Hour difference on the fly and show it in a text box.
Can anybody help me to achieve this task using client side scripting?
Thank You in Advance.
Juli

Hi sravankumar1107,
According to your description, my understanding is that you want to figure the difference between start date and end date and then you want to place the value in a text box.
Here is a code snippet for your referecnce:
<script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.3.2/jquery.min.js">
</script>
<script type="text/javascript">
function initControl()
var txtstartDate = $("#" + $("label:contains('Start Time Date')").attr("for")).val();
var txtstartHour = $("#" + $("label:contains('Start Time Hours')").attr("for")).val();
var txtstartMinute = $("#" + $("label:contains('Start Time Minutes')").attr("for")).val();
var txtendDate = $("#" + $("label:contains('End Time Date')").attr("for")).val();
var txtendHour = $("#" + $("label:contains('End Time Hours')").attr("for")).val();
var txtendMinutes = $("#" + $("label:contains('End Time Minutes')").attr("for")).val();
var starttime = new Date(txtstartDate +" "txtstartHour +":"txtstartMinute);
var endtime = new Date(txtendDate +" "txtendHour +":"txtendMinutes);
var diff = endtime - starttime;
var diffSeconds = diff/1000;
var HH = Math.floor(diffSeconds/3600);
txtHour.val(HH);
</script>
More information for your reference:
http://stackoverflow.com/questions/21844281/i-am-using-datetime-picker-and-want-that-my-start-and-end-date-must-have-differe
http://blog.pentalogic.net/2009/09/setting-default-duration-for-new-calender-events/
Best Regards
Zhengyu Guo
TechNet Community Support

Basic Start/Finish Date and Requirment Date in Maintenance Order

Sir,
We want to know the link between Order Start/finish date and requirement date in Maintenance Order.
As we are facing problem during change in dates.
When we change either start date or finish date in the order, the system automatically change the requirment date as of ondate of all the materials which has been earlier issued and also consider the today date.
Like in Maintenance Order
Basic Start Date - 01.04.2009
Basic End Date - 31.05.2009
We have issued materials on the order at different date by putting offset value for the requirement date.
Now if we increase the Basic End Date of order to n30.062.009 or whatelse, the system automatically changes the requirement dates of all the materials issue based on current date. Suppose we changed the Basic End date on 10.11.2009, the system changes all the requirement dates by calulating offset value from 10.11.2009. However these materials has been issued earlier.
I want to know if there is any remedy to stop to change the requirement dates automatically.
With Regards
Mudit Gupta

HI
In general the requirement date will get changed only when the IMG settings in OPU7 permits the requirments dates should be adjusted towards the order basic start and end dates
kinldy check and adjust as per the requirement
regards
thyagarajan

Changing date & time under eventlog

Would like to know how to adjust date & time settings in the eventlog view for my Cisco 1400 bridge. Tx!

There are two things going on here.
1. When you change the capture date/time (Date Time Original), the change is immediately reflected in the EXIF portion of the Metadata panel in the Library module. Because this is a metadata change, the warning arrow appears on the thumbnail (if you have that set to show in the View Options)....and clicking on that arrow brings up the "Metadata changed, do you want to save to disk" dialog. Note that this happens when you do any kind of metadata change, not just changing the date/time. At that point you can either decide to write the metadata to disk, or not.....if you typically write your metadata changes to XMP I guess you'd say "Save", but if you don't then just ignore it. Of course if you say "Save" then Lightroom will do as requested and write the Metadata, if it's a DNG,JPEG,TIFF etc, the Metadata is written to the XMP section of the file header....but if it's a proprietary RAW then it's written to an XMP sidecar.
2. The second thing is that if you have the option set in the Catalog Settings to write date/time changes into proprietary raw files, then the change that you make is reflected in the Raw file.....this is a different change to the XMP update.

Date/time changes in maintenance order

Similar Messages

Maybe you are looking for