Date/Time of the actual production in REM

Hi experts,
In REM, we need to confirm the actual date/Time of the beguining/End of production in MFBF.
What i have to do?
Thnaks in advance.

Hi,
This requirement is not possible in REM.
You need to do the Backflush periodically, start and end of Production is not possible..
Regards,
Siva

Similar Messages

Planned & actual production in REM

Hi expert,
I need to display the gap between the Planned production & the actual production.
Thanks in advance.

Hi,
In REM the Planned and Actual Production Report is a difficult one.
As the Planned Order will not be available after confirmations and the Confirmations are done with reference to PCC thanthe planned Order itself..
So, one suggestion would be to go for a ZReport..
Regards,
Siva

Why can't I sync my facebook invitations to my iCal? My Mac Mail won't detect the date/time on the email anymore.

I have been trying to sync my facebook invitations to my iCal and no longer able to do this through my Mac Mail. When I would receive a facebook invitaiton through my comcast email, I used to be able to hover my mouse over the date/time of the invitation and then I could easily "Add to iCal" or "See Date in iCal", but am no longer able to do so. I can still add other invitations, just not the facebook invitations. Any ideas?

You can get your photos off your phone. If they are all in Camera Roll just import them to your new computer (http://support.apple.com/kb/HT4083). If some of them were synced to your iphone from your computer (i.e., in photo library) just use an app like PhotoSync and send them to your new computer wirelessly. For that matter, you can sync your phone with your new computer without losing your data and settings if you carefully follow this guide: https://discussions.apple.com/docs/DOC-3141. Your only issue will be non-purchased music on your phone which is not in your new iTunes library, which will require 3rd party software such as Touch Copy to transfer from your phone to iTunes (or you will have to rip you CDs again to import them).

Date time in the transaction access log of ST03N

Hi,
How do I get date time in the log of transaction access by user.
in transaction ST03N
Pls let me know if any other transaction is available there
I can get transaction access logs userwise.
Points will be rewarded.
Thanks

Hi,
SM19 - Configuration / SM20 - evaluation (if audit log maintained) will fetch the date and time of tcode accessed by user.
Rakesh

Can we find out the date/time when the datafile last extended?

Hello all,
Can we find out the date/time when the datafile last extended?
Is it possible to find out from the alert.log file?
Correct me if I am worng?
Thanks in advance
Himanshu

In continuation with the earlier post, can you tell me what sort of entry should be search if the above information is available in the alert.log file?
Thanks
Himanshu

Is there a screensnap app which uses date/time as the filename?

I'm looking for a simple screensnap app which uses the current date/time as the filename... e.g. 010220120500 or something similar.

Ah... automator... the ******* step-child of the OS. Forgot about that one. I checked out your link and ran up against a barrier. I can make a sequential workflow, a date/time workflow in day/month/year and a couple other variations... but not a truly sequential day/date/year/hour/minute/second non-repeating workflow. Oddly enough I can make a hour/min/sec workflow but that would not absolutely define the file and could create duplicate filenames.
I've looked over a lot of these screensnap apps and haven't found one that can do a non-repeating (thru system on/off sequences) filenaming thing. Maybe it can't be done.
Automator was a good idea and it was fun using it again. Thanks Jeff.

When I print out any web page, I get date/time at the bottom. I just want to print the date , what format do I use in page setup custom box ??

I want to print just the time at the bottom of my printed page
what format do I input into Page Setup>Custom box
What ever I input it is shown in the actual format that I have input
i.e date is shown as date not 28/06/2010
== This happened ==
Every time Firefox opened

I do not know much on this subject. But check Window to see if
all the languages you need are listed. Then check your other
programs that, like Firefox, have their own language files.

How to use dates/times in the definition of local fields?

Hello!
I have few tough questions for which I haven't found an answer. I hope someone is capable to help me.
1. Is there a transaction to search tables if we know the field?
2. I'd like to define a local field and need to use dates in the calculation function. So basically I need to calculate the lean-time from the date of the purchase order (field BSTDK) to the date of the final delivery (field PLIFTS) and the result should be displayed in weeks. How can I do this? Or can I?
3. Can I use the local fields further in my calculations?
Thank you in advance!
Maria Kangasniemi

Hi,
1. Is there a transaction to search tables if we know the field?
Tcode: SE84
2. I'd like to define a local field and need to use dates in the calculation function. So basically I need to calculate the lean-time from the date of the purchase order (field BSTDK) to the date of the final delivery (field PLIFTS) and the result should be displayed in weeks. How can I do this? Or can I?
Doing some calculation you can define it.
3. Can I use the local fields further in my calculations?
What is local Fields?

How to display the Date Time using the System Time zone

Friends,
Can anyone help me with below scenario..
I have to display Date Time on a jsff page, This value associated to one of Transient View object populated from the database.. Is there any way I can handle on the screen to display the same date /time bassed on the system time zone ?
I know one way how we can handle it.. while populating to View object we can set the time based on the system time zone.. but it would be easy and simple if there is any approach I can use on UI layer itself..
thanks

I don't understand why this display doesn't pay attention to the date/time format settings that are set in the language and text prefs.
Those settings are used for date OR time, and provide for different displays depending on the space available. The menu bar does not have a fixed space available, and wants both date and time.
In Leopard, it used the medium time format. To get the date and time, you could modify that format to include the date, but that could cause problems with software that happened to use the medium time format and expectede just the time. Also, you might want to change the medium time format without changing the menu bar display. For these reasons, Snow Leopard's menu bar clock uses its own formatting for data and time display.

Displaying date/time in the report of last updating data?

Hi,
I have produced a report over a multiprovider. The multiprovider is built up from tow cubes. The data is being updated to one cube each hour and to the another cube one time daily.
The date/time that display in the report is for the last updating data of the cube that updating one time daily.
I want that the date\time be updated each hour, in another words, to display the date\time of last updating data to the second cube.
Any suggestions?

Hi Mohamad,
Please read through this discussion for a solution:
ROLLUPTIME of a multiprovider
Hope this helps...

Changing plain text date number to the actual month

Building an analysis using OBIEE version 11.1.1.6.8.
We have a date table named "History-Period"."Fiscal Month" and it uses 1,2,3,4,5,6,7,8,9,10,11,12 as months. 1 should be October, 2 should be November...12 should be September. I've tried a simple CASE WHEN "History-Period"."Fiscal Month" = 1 THEN 'October' but it does not work.
I believe the numbers are in a plain text format. Do I need to cast this as a different data type?
PS: There is also an actual "History-Period"."Month" table I could use where it provides the actual month, but it does not place them in fiscal year order (or any logical order to be honest).
Thanks in advance!

Hallo,
If your data in History-Period is of type text, then try adding single quotes round the number in your case statement. For example:
CASE WHEN "History-Period"."Fiscal Month" = '1' THEN 'October'
Or perhaps you could add a column to the History.Month table to give the order?
Regards,
Ian Bristow

Converting Delivery Creation Date/Time into the Local Date/Time

Hi
I have two fields like 'Delivery Creation Date' and 'Delivery Creation Time' in ECC system . My user wants the Delivery Creation Date / Delivery Creation Time in Local time of Plants .
For example :
Delivery Plant DelivCreationDate DelivCreationTime DelivCreationDate(Local) DelivCreationTime(Local)
312456 1650 11/2/2007 4:30 11/2/2007 3:30
Here the Plant 1650 is in Mexico . The above delivery is created in Canada in ECC system according to the candain time .
But user wants to convert the Candain Delivery Creation Date and Time into the Local Date/Time of specific plant .
So we need to convert the Candain Delivery Creation Date and Time into Mexico timings .
How can it is possible this one and user wants to automate this process .
Please let me know
Mubeen

DATA :
timestamp like TZONREF-TSTAMPS,
time like sy-uzeit,
date like sy-datum.
The following function module is used to convert the
time and date into GMT timestamp
CALL FUNCTION 'IB_CONVERT_INTO_TIMESTAMP'
EXPORTING
i_datlo = <source_fields>-delivery_date
i_timlo = <source_fields>-delivery_time
I_TZONE = CAD'
IMPORTING
E_TIMESTAMP = timestamp.
The following function module is used to convert the
above obtained timestamp to MEX timezone date and time.
CALL FUNCTION 'IB_CONVERT_FROM_TIMESTAMP'
EXPORTING
i_timestamp = timestamp
I_TZONE = MEX
IMPORTING
E_DATLO = date
E_TIMLO = time.
CAD and MEX are variables i have used...
the challenge is to find the canadian and mexican time zone....CAD and MEX.
which you can get by performing a lookup in table T001W and passing country as parameter.

Get the creation date time of the file located in persentation server

Hi Experts,
I have a requirement where i need to fetch the creation date time of a file.
ex. file path : C:\Documents and Settings\file.xml
I have the file path, i need to know when this file is created.
Is there any GUI services or FM to achieve this?
Your help in this regard is highly appreciated.
Kind Regards,
Vidya

Hi Sandeep,
Thanks for your reply.
Can you please explain in detail the procedure to Maintain a log table & fetching the
creation date time of a file in persentation server.
The requirement is :
I have the directory path, which contains many xml files. ex : C:\Documents and Settings\Dir
I have to fetch files ,which has been created between the specified time stamp.
ex : October 24, 2008 to December 24, 2008
So i need to fetch all the files from the directory "Dir" which has been created between
October 24, 2008 to December 24, 2008.
Regards,
Vidya

Is there a way to develop the same raw file multiple times, each time keeping the final product?

I've been working with my NEF raw files. When I import one into LR I can start developing it right away, which I've done. I also know that the modifications aren't made to the raw file but kept in an XMP file. Since the I'm not actually changing the raw file do you know if there is a way to make a secondary edit of the file?
Here's an example. Let's say I have a raw file and I want to develop it in color. Then when I'm all done I want to start over and develop it again and black and white but keep the color one as well.
I know I can undo all the edits I've made but then I lose all that work too.
Is there a way to develop an image twice and keep both final products? I know copying the raw file and renaming it is one crude way but I have to believe there's a better, easier way.

Yes, you can make a virtual copy at any time.
If you want the virtual copy to be un-edited after you have done some editing to the "non-virtual copy", you could open the "non-virtual copy" in the Develop Module, click on Reset, create the virtual copy, then undo the Reset operation (click on the last real edit in the History Panel)

PDF: How to get date/time into the heading of a FOP/PDF file?

Hi!
What changes do I need to make to the PDF report template or what else can I put in the heading block of the "Print" page so that it will include the date and time the PDF was generated?
Also how would I add this so that it prints on the bottom of the page like the page number?
Thanks in advance for any tips, tricks, ideas, examples, etc.!
Dave Venus

Hi!
Perhaps I missed this some place but you can get the value of a page item or application item into the header or footer of a (FOP) PDF report by using a "&<item>." format substitution string. For example I have a 1 time application process that puts todays date in an application item named F106_SYSDATE (F106_ is the application id). Then in my headers I use:
XXXX Report on: &F106_SYSDATE.
Simple. Works great! And better yet my users are a little happier! :)
Thank for everyone's help and suggestions!
Dave Venus

Date/Time of the actual production in REM

Similar Messages

Maybe you are looking for