Date updation in Contacts in mass

Hi,
we need to do mass update of data in contacts.
Example - address deletion/change, email deletion/change and marketing attributes deletion/change etc in the contacts.
Is there is any standard function module through which I can able to address this functionality.
Also need to update the work address for contacts in mass.
Is there is any standard function module top address this requirement.
Regards
ISWARI

Hello,
Please check the FM CRMXIF_PARTNER_REL_SAVE & CRMXIF_PARTNER_SAVE. This should be useful for most of your requirement except Marketing Attributes...
Piyush

Similar Messages

  • Mass updation in Contacts

    Hi,
    we need to do mass update of data in contacts.
    Example - address deletion/change, email deletion/change and marketing attributes deletion/change etc in the contacts.
    Is there is any standard function module through which I can able to address this functionality.
    Also need to update the work address for contacts in mass.
    Is there is any standard function module top address this requirement.
    Regards
    ISWARI

    HI Iswaribabu,
    I am also having the same requirement, did you find the way to do mass updation, if yes please provide me the information.
    Thank you in advance.
    Ameen

  • When updating my iphone 4s to the new ios 6, it lost all data including photos, contacts etc. itunes now cannot find previous back up. Is there anyway i can get this lost data

    when updating my iphone 4s to the new ios 6, it lost all data including photos, contacts etc. itunes now cannot find previous back up. Is there anyway i can get this lost data

    rebeccakhwar17 wrote:
    Hi
    Can anyone help me please. I've recesally had to take my Iphone to be repaired before I. took my phone i backed up my data into Icloud and when i got my new phone I have lost all my contacts and photos.
    Restore the iPhone from your backup.
    See this -> http://support.apple.com/kb/ht1766
    Then make sure you sync everything to your computer so you do not lose it.

  • Mass data update in Value mapping table

    Hi ,
      I have used Value mapping replication to update the mass data from external source to Value mapping table . Its updatating in Runtime Cache but i want the data to be visible in GUI Value mapping table as well. Is it possible ? Because i doubt that the data in Runtime Cache may get  removed if the system restarts . Can any one help ?
    Thanks
    Laks

    Hi NALLAM GUNA RANJAN,
      Thanks for your prompt reply but i didn't get what you are trying to convey . My issue here is
    Instead of manually entering key-value pair in Value mapping table , I used Value mapping replication ( http://help.sap.com/saphelp_nw04/helpdata/en/2a/9d2891cc976549a9ad9f81e9b8db25/frameset.htm )
    Its updating the data in Runtime Cache ( you can see this using Cache Monitoring )  but not able to view the data in Actual Value mapping Table (GUI in Directory of SAPXI) I want the data updated using Replication to be visible in GUI table is it possible ?
    Hope you got the question much better now
    Thanks
    Laks

  • How can i put customs dates/anniversary dates from my contacts into my iphone calendar?

    I have set up custom dates in my contacts as well as anniversary dates. I'd like to know if there is an app to import these dates into a calendar, it doesn't have to be the iphone standard calendar. I'd just like them to show up as a normal calendar entry, rather than having to add them manually into the calendar. Also, if you have an anniverary date in a contact, and then a relationship as "spouse" to another contact, does this not assume they will have the same anniversary date and therefore update their contact details with this event too ? I don't mind having to buy an app, but most of the ones i have read only add birthdays, and i want to ensure all the custom dates I have set up get imported. These are for friends children's details who don't have their own contact set up in my phone. Thanks, any help appreciated!

    View Purchase History
    http://support.apple.com/kb/HT2727

  • How do I update my contacts on my MacBook pro from my iPhone or iMac?

    my contacts on my MacBook pro are out of date. How do I update them from my iPhone or Imac?

    Hey there dgt11,
    It seems like you may have missed that section of the article I provided, so I will go ahead and highlight it for you:
    OS X Lion or later
    You can use these steps with Contacts on OS X Mountain Lion or later or Address Book on OS X Lion. After each step, check to see if the issue still exists.
    Make sure iCloud Contacts is on
    Choose Apple () > System Preferences, click iCloud, and select Contacts. 
    See which version of OS X you're using
    Make sure that you're using OS X Lion v10.7.5 or later. Learn how to see which version of OS X you're using.
    Check your Internet connection
    Try to go to www.apple.com. If you can't connect to the Internet, your iCloud contacts won't update in Contacts or Address Book. Get help with your Internet connection.
    Open a secure website to see if you can access ports 80 and 443. Safari requires access to port 443 to push and fetch updates to and from the iCloud Contacts servers.
    Check your account details
    Choose Apple () > System Preferences, and click iCloud. Make sure that you're signed in to the same iCloud account that you're using on your other supported devices.
    Refresh Contacts or Address Book
    If recent changes don't appear in Contacts or Address Book, try to refresh by quitting and reopening the app.
    Check your settings
    Make sure that the contacts are syncing through iCloud and not through a third-party, such as Google or Yahoo. iCloud won't sync contacts that are associated with a different service.
    Open Contacts (or Address Book on OS X Lion).
    Click All [iCloud Account Name] in the left sidebar.
    Search for the contact that wasn't syncing properly.
    If the contact isn't visible, then the contact exists in a third-party account, not iCloud.
    You can import the contact from a third-party account into iCloud.
    If recent changes to contacts on OS X don't appear on your other devices and you're syncing contacts with multiple accounts on your device (iCloud, Gmail, Yahoo), make sure that iCloud is your default account for Contacts:
    Open Contacts (or Address Book on OS X Lion).
    Choose Contacts > Preferences (or Address Book > Preferences on OS X Lion).
    On the General tab, make sure that your iCloud account is the default.
    After setting up iCloud Contacts, you might need to quit and reopen Contacts or Address Book on your Mac. Then make sure that you set up your account correctly in Contacts or Address Book:
    Open Contacts (or Address Book on OS X Lion).
    Choose Contacts > Preferences (or Address Book > Preferences on OS X Lion).
    Click Accounts.
    Make sure that your iCloud account has the correct name in the Apple ID field.
    Turn iCloud Contacts off and back on
    Quit Contacts (or Address Book on OS X Lion).
    Choose Apple () > System Preferences and click iCloud.
    Deselect Contacts.
    Click Keep Contacts.
    Close System Preferences and wait about a minute.
    Open System Preferences and choose iCloud.
    Select Contacts.
    Open Contacts (or Address Book).
    Restart your computer
    Restart your computer and check the issue.
    Get help using iCloud Contacts - Apple Support
    https://support.apple.com/en-gb/ts3998
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • How do I manually update a contact with their Facebook?

    I signed on in settings into Facebook, I also have my Facebook app up to date.
    My contacts list correctly synced about 40% of my contacts with the correct Facebook account - with their profile picture etc.
    One contact is incorrect, I have no idea how that happened, their names and profiles are totally different.
    The problem is now that I'm trying to update my phone contacts with their Facebook counterpart it simply won't work.
    If I type in say John Smith it won't find the person, if I go to their Facebook page and find out the username eg john.smith.9 it still won't work, I tried going back into settings and updating contacts but still nothing?!
    Any help would be greatly appreciated. I don't want to download 500 Facebook 'friends' just to update the ones in my phone book so I get their profile pic etc.
    Thanks

    Update: I discovered that if I open a VPN connection to the server, then I can (almost) publish from VS as I did before, so the question has partially been avoided.
    I say partially, because when I try to publish, it copies the files correctly, but then sits there for quite a while, before giving the error...
    Error 1
    An exception occurred when deploying the database for the application.
    Connection Timeout Expired.  The timeout period elapsed while attempting to consume the pre-login handshake acknowledgement.  This could be because the pre-login handshake failed or the server was unable to respond back in time.  The duration
    spent while attempting to connect to this server was - [Pre-Login] initialization=42271; handshake=34;
    C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\LightSwitch\v1.0\Microsoft.LightSwitch.targets
    1114 10
    HLReports.OfficeSystem.MainApp
    Any idea what this means?
    FREE custom controls for Lightswitch! A collection of useful controls for Lightswitch developers (Silverlight client only).
    Download from the Visual Studio Gallery.
    If you're really bored, you could read about my experiments with .NET and some of Microsoft's newer technologies at
    http://dotnetwhatnot.pixata.co.uk/

  • No FB status updates in contacts

    I upgraded to ICS few days back and I'm liking it. But there is this problem that even after syncing my facebook account, I dont get the option of showing status updates in contacts. That option is grayed out. Any solution?
    Also, some of my contacts are not fully syncing with facebook. Contact picture is not being displayed for some.

    settings > app > all >facebook > clear data
    Turn on wifi
    Go to settings > account and sync > turn it on
    Add account > add facebook (Add facebook and use it for a minute) and facebook inside Xperia as well
    wait for atleast 5 minutes and let the contacts sync
    Now go to contacts > settings > select show status updates > all
    Now-
    you have to sync atleast for 4-5 minutes,, both "facebook" and "facebook inside xperia"
    even make sure you log in into facebook and even select "sync" option that it shows at startup and use facebook for one minute
    Then go to contacts
    Discussion guidelines.
    Message me or any other moderator to seek help regarding moderation.

  • Date Created, Date Modified for contacts

    Is there a way to determine the date a contact was added or modified? I would think this field would be there somewhere, but I cannot find it, or add it for that matter. Because both my husband and I sync our addess books through the same mobile.me account, we have ended up with many non-exact duplicates. I would like to determine which ones are the most recent versions. Thanks.

    In the Address Book display, each card that has been updated since you began to operate the current version of the application has the date of when last updated. I think this began anew with the version of AB that came with Leopard, and has carried over into that in Snow Leopard.
    For example, there are addresses in the AB on my G4 running Tiger that have a date updated that has disappeared in Leopard and SL.
    Do a find duplicate and check this date. Where no date, the entry pre-dates 10.5.x, in my analysis of the matter.
    Ernie

  • Now Up To Date and Now Contact Sync with iPhone

    I purchased an iPhone after using a Treo 700 with my Mac. All my calendar data is in Now Up To Date and all my contacts are in Now Contact. How do I best transition to the iPhone?
    Should I export data from Now to the Apple applications and forget about Now Up To Date and Now Contact?
    Any help and instruction would be great. I am ready to leave my treo behind!
    CC

    I've been using my Treo as a go-between for Now Up To Date and iCal with software from The Missing Sync. This seems to work as a one-way sync from NUD to my iCal. I sent an email to them asking for help and here's their reply:
    Description of problem:
    Hi. I've been trying to use your software to get my data from Now Up To Date (NUD) to iCal so that I can have it on my iPhone. I know you don't support the iPhone, but maybe you can see if my approach is valid at all. I have a profile in The Missing Sync that only uses the NUD conduit. It is able to get any changes to my Treo 700p just fine. Then I made another profile that only uses the Mark/Space Tasks and Events conduits to get that data from the Treo to iCal. Somehow it worked a few times, but not any more. Is my idea a good one? Should I keep trying or give it up?
    Steps to Reproduce:
    Here's my steps.
    1) Profile named NUD Treo. Has active only the NUD conduit, set to synchronize. I run the sync from the Treo and all changes I made in NUD are transfered to the Treo just fine.
    2) I change to the profile named Treo iCal. I have slected the two condiuts, Mark/Space Events and Mark/Space Tasks. I have it set to synchronize all categories. When I run the sync from the Treo, it works for a bit, but none of the changes show up in iCal. Even though the items show in the Treo's calendar, they don't transfer to iCal.
    A couple of times when I did the transfer I saw a comment "pushing from handheld".... and on those syncs the data showed up. But it doesn't always say that and the data doesn't transfer on thos syncs.
    The reply from The Missing Sync's Support:
    Hello,
    Yes, that procedure should work.
    First, update to 5.1.2 if you haven't done so yet. http://www.markspace.com/ftp/missingsyncpalmos5.1.2.dmg
    Then follow these directions to have the Palm overwrite the Mac's Address Book and iCal.
    http://www.markspace.com/support/kb.php?x=&mod_id=2&id=2878

  • Last data update

    Hi,
    How I can find the last data update information(date and time) of multiprovider in BW?
    Kindly help on this.
    Regards
    Mukul Singhal

    Let me explain how the "last data update" works.
    If the query is based on one cube or DSO, it is the time of the last request upload.
    If the query is based on a multiprovider, like the example given ealier,
    assume there are three cubes in multiprovider : 
    Last update of cube1 is 11/17/2008
    Last update of cube2 is 11/19/2008
    Last udpate of cube3 is 11/20/2008.
    The "last data update" will be the earliest day of the "last data update"s of all partproviders, i.e.11/17/2008.
    Because the meaning of "last data update" is that, data (of all partproviders) has been already updated until this time.
    Now we assume there are three cubes like this in multiprovider :
    Last update of cube1 is 11/17/2008
    Last update of cube2 is 11/19/2008
    Cube3 is empty. It has never been loaded with any request.
    Then the "last data update" will be empty. Because until no time has all partproviders been updated. This is the design of the system.
    Regards,
    Patricia

  • How to import or sync Exchange server data like Calendar, Contacts with a web application or web service

    How to import or sync Exchange data like Calendar, Contacts with a web application or web service.
    1. Is there any API to import contacts and calendar (tasks and events) from exchange server to my calendar in web application using web services or http request. the user would have provided the username and password for his exchange account.
    2. Is there any licensing involved to communicate with exchange server for its data.
    thanks in advance 

    I am bit lost here; i have my exchange credentials, how (or) can i use the above mentioned solution for windows application or web services. can you please point in the right direction. my requirement is this: how to sync exchange data with a third party
    app or webapp(my development) using EWS. how to start with, starting point and steps to do[just overview ;)].

  • Unable to run bapis for project status update and date update together

    Hi Experts,
    I have a requirement to update the dates and status of a project WBS at level 4. I am trying to do update the CJ02 Transaction using standard BAPI available. I need to do both Date update and status update in the same LOOP PASS   i am using the below mention bapi. when i am doing so i am getting an error Project 'A._____' has been currently processed by ID i.e. my id.
    I have tried putting  a wait for 2 seconds in the code but its still not working. please find the order below in which i am calling the bapi.
    Loop at itab.
    if  date_changed = 'X'.
          CALL FUNCTION 'BAPI_PROJECT_MAINTAIN'
          READ TABLE it_error WITH KEY message_type = c_e.
          IF sy-subrc <> 0.
    Commit
            CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
                 EXPORTING
                      wait   = c_x
                 IMPORTING
                      return = s_ret.
       endif.
    endif.
    if Status_change = 'X'.
          CALL FUNCTION 'BAPI_PS_INITIALIZATION' .
          CALL FUNCTION 'BAPI_BUS2054_SET_STATUS'
          READ TABLE t_result WITH KEY message_type = c_e.
          IF sy-subrc NE 0.
            CALL FUNCTION 'BAPI_PS_PRECOMMIT'
                 TABLES
                      et_return = t_ret.
            CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
                 EXPORTING
                      wait   = c_x
                 IMPORTING
                      return = s_ret.
         ENDIF.
    endif.
        WAIT UP TO 4 SECONDS.
    endloop.

    Try to use
    SET UPDATE TASK LOCAL.
    before each BAPI call.
    Did you try to debug through your code, leaving sufficient time between BAPI calls? If it does work like that, then the above statement might help.

  • How can i update my contacts on the ipad and have it go to my iphone. I tried backing up on icloud but this doesn't work. yes i had them plugged in when i backed it up

    I want to update my contacts on my IPad and transfer it to my IPhone4. I tried backing up to ICloud (plugged in) but it didn't work.
    Anyone have any suggestions?

    Matthew Smith wrote:
    ... The only way I can think of doing it otherwise is possibly by syncing via iTunes via another Mac OS X user account where the address book is empty and then deleting them there and resyncing. ...
    Brilliant! That worked like a charm.
    I created a new User Account on one of my Macs and logged into it. I connected my iPhone to its iTunes and checked my iPhone's Sync Contacts option in iTunes. Since that account's address book was basically empty (two dummy contacts, one for Apple and one for this new user), I ended up with only those two Contacts on the phone. Then, going back to my real User account (which does not have syncing turned on in iTunes) the phone synced nicely with the MobileMe account and populated the phone with all the MobileMe contacts and groups.

  • HT4946 i am administrator for Mac. My husband and i both have separate iPhones with separate contacts. Since i0S 6.1 update these contacts are now shared which we do not want. I have set up separate iCloud email and account for my husband. How do i ensure

    I am administrator for Mac. My husband and i both have separate iPhones with separate contacts. Since i0S 6.1 update these contacts are now shared which we do not want. I have set up separate iCloud email and account for my husband. How do i ensure that i

    You can continue to use the current AppleID for iTunes, but your husband can create a new AppleID to use to create a new iCloud account that will be his own and not overlap with yours.  If you do not have another email address to use for an AppleID, just get a free Gmail account and use that.
    You can have as many AppleIDs as you want (or at least, as many as you have email addresses for).  You can use a separate AppleID for the store, another for iCloud, and even another for iMessage if you wish.
    You will want to keep the current one as the shared one for the store as all your previous purchases are permanently tied to it, and thus you need that AppleID to update or redownload your current purchased content.

Maybe you are looking for