DATE VALIDATION ...DATE STAMP QUESTION?
am fixing to send out the secound out the secound letter out reqarding validation of the debt .....does the post office charge to have the letter date stamp? what all needs to be done in this reqard ..?
No...asking for a barrel date stamp does not cost anything. If you would like physical evidence of your mailing you can ask for a certificate of mailing. I believe that still costs $1.30 plus .49 for postage.
Similar Messages
-
Hi all,
I sent a couple of Skype messages to a friend who's sadly blocked me. These were sent on 26 and 29 September. They were pending for about 3 weeks I think, then suddenly showed the timestamp.
First, as the timestamp showed when they were written, rather than delivered (if they were), then were the IMs delivered? Secondly, how would they be delivered? They unblocked me, checked for messages, and then reblocked me, perhaps? The account is permanently offline, so I'm most probably blocked.
I'm just trying to be sure that the IMs were in fact delivered rather than expired. It just seems strange that the time stamp was the message date rather than a later delivery date.Hi,
I don't find any function module, but it does'nt really hard to code this using DIV and MOD instructions :
If you've got your time in seconds :
w_day = w_time DIV 86400.
w_mod = w_time MOD 86400.
w_hour = w_mod DIV 3600.
w_mod = w_mod MOD 3600.
It doesn't seem too bad in term of performance....
Mathieu -
Certificate of Completion with Date Stamp
Greetings,
Is it possible to make a form that will automatcally add a date stamp to it.? Here is the scenario: a user completes a series of questions through an eLearning module. At the end of it, they click on a button/link that takes them to a page that has a PDF in it. The PDF has a fillable form so they enter their name into it and at some point, maybe when they get to the pdp, it is time/date stamped for that user. They print the PDF out and give it to their supervisor.
Make sense?
Maybe it's not possible to get the stamp to be added as soon as they get to the PDF, maybe they have to push a button on the PDF to have it added? I don't know what is possible or if it is possible. We would just like to have some way to get a date stamp onto the PDF. The PDF doesn't have to be downloaded, it only needs to be printed as hardcopy, although having an option to have the PDF emailed to the user might be an option as long as it can only be printed.
Comments, suggestions?Yes, it's possible, with a bit of JavaScript. You can have the date field automatically populated when the form is first opened or after they enter their name. For the latter, you could add the following script to the Validate event of the name field:
// Get a reference to the date field
var f = getField("date");
if (event.value) {
f.value = util.printd("mm/dd/yyyy", new Date());
} else {
f.value = "";
Replace "date" with the actual name of your date field. You can also use a different date format, but this should get you started. If you want it to populate when the document is opened, it's a bit more complicated, but post again if this is what you want. -
Iphoto 08 7.1.1 VS IPHOTO 6 6.0.6 dialog and date stamping photos
Hello again,
I asked how to date stamp and describe each job photo I take on my 08 version of Iphoto since it doesn't have the "YEARBOOK" selection in the BOOK formats. well I just tried something for the he## of it and it worked real well. Don't use BOOKS at all. Put the photos in ALBLUMS, click "select all" in EDIT click "batch change" in PHOTOS, set Title to Date and TIME then when the time and date show under each picture type next to them what you want to describe. Cilck on PRINT and a drop down menue will appear, chose "Proof sheet" and hit print again and off you go. NOTE if the date and time do not appear when you choose "Date and Time go to VIEW and make sure "Titles" is checked. It works for me -Now back to all my other problems --How come MIGRATE ASSISTANT doesn't????Sorry Larry,
It was late and I was blind so I threw out the question -----The problem is I used the Migration Assistant when I got a new HD installed in my G4 and nothing happened other than the Fire Wire logo just kept running on my screen. I tied my G4 to my Imac with a Fire Wire--followed screen prompt on my G4 to restart my Imac while holding down the "T" key (on the IMAC). I did that and the Fire Wire logo appeared and began running in the faded mode on my IMAC screen. (Normally it should be a bright gray and yellow) I let it run but nothing ever happened and no info showed up on my G4. I tried it several times until the definition of Insanity popped into my head. I have a Rocstor back up HD for storage, tried leaving connected and disconnecting it to no avail. I assume that the Fire Wire logo running in the "ghost" mode is telling me something unfortunately I am just to clueless to know what it is. I am sure that I changed cables (reasonably) as that would be a natural, but nothing changed. I have gone the other way, G4 to IMAC using the same procedures with no problem.
Thanks, Mel -
Hello - In Adobe Acrobat 9 Pro, I'm creating a security
envelope using Acrobat's included "eEnvelope with Date Stamp"
template (template2.pdf). The resulting date stamp is exactly 8
hours ahead of the actual time on my computer's clock (i.e. I
created and emailed the security envelope at 8:30 PM on Jan. 25;
date stamp shows 4:30 AM on Jan. 26). Anyone know how to fix? Thank
you.Hello rgille,
Thank you for your post.
You should know that these forums are specific to the
Acrobat.com website and its set of hosted services, and do
not cover the Acrobat family of desktop products.
Any questions related to the Acrobat family of desktop
products would be best suited in the Acrobat Forums:
http://www.adobeforums.com/cgi-bin/webx/.3bbeda8b/
Thanks!
Pete -
I am using the eEnvelope with Date Stamp to send
secure email attachments. It works great, however, the timestamp that appears on the
envelope has no relationship to the time at which the enve
lope was created. Is this just the way it works or is there a way to make the time appear as the actual time of creation of the envelope?Hello rgille,
Thank you for your post.
You should know that these forums are specific to the
Acrobat.com website and its set of hosted services, and do
not cover the Acrobat family of desktop products.
Any questions related to the Acrobat family of desktop
products would be best suited in the Acrobat Forums:
http://www.adobeforums.com/cgi-bin/webx/.3bbeda8b/
Thanks!
Pete -
Getting rid of the date stamp in "Export Waveform to Spreadsheet.vi"
Probably a very simple and stupid question, but how do I get rid of the date stamp while keeping the time stamp in the "Export Waveform to Spreadsheet File.vi"? I may have found the place on the block diagram, but I'm not entirely clear how that vi works.
Thanks,
JoeNever mind, I've figured it out.
For the curious, it was a matter of altering the "Waveform to Date Time String.vi" in the "Export Waveform to Spreadsheet.vi". All you need to do is stop it from concatenating the time string with the date string in that particular VI. I hope this helps some of my fellow newbies.
Sorry to waste the rest of your time.
Thanks,
Joe -
AD date stamp OR File date stamp?
Hi,
Im in the process of evalutating software to archive files to cheaper storage based on size and date stamp.
Problem, we unfortunately migrated from eDir to AD 2.5 years ago and products used thus far use the AD date stamp from when we migrated which is not useful.
My question is, does storage manager archive base on the date stamp of the file?
I know we have files that havn't been modified for more than 10 years.
Is there a way around this?
Thanks
AlbertNot using anything at the moment.....basically looking fo something that will do the job.
Will look at dynamic files serveices.
thanks :-)
Originally Posted by jmarton
asabadin wrote:
> Im in the process of evalutating software to archive files to cheaper
> storage based on size and date stamp.
>
> Problem, we unfortunately migrated from eDir to AD 2.5 years ago and
> products used thus far use the AD date stamp from when we migrated
> which is not useful.
>
> My question is, does storage manager archive base on the date stamp of
> the file?
>
> I know we have files that havn't been modified for more than 10 years.
>
> Is there a way around this?
How are you archiving files? Are you using a grooming rule? If so,
you can specify a filter based on create/modify/access time. This may
help for archiving files to the vault via grooming. However, to be
honest if you're wanting to archive files to cheaper storage then a
better option is Novell Dynamic File Services for Windows.
https://www.novell.com/products/dynamic-file-services/
This gives you the option of moving files to cheaper storage but still
being accessible "online" by your users, or truly archiving them to
cheaper storage (or even the cloud) and only archive managers have
access to files. It's been a while since I last looked at NDFS but I
believe you can configure policies there as well based on
create/modify/access time.
Your world is on the move. http://www.novell.com/mobility/
Supercharge your IT knowledge. http://www.novell.com/techtalks/ -
I am newbie to Lightroom but am quickly loving this program. One of the issues that led me here is date stamping. Our dSLR does not allow for date stamping (Nikon D40x). What it does is retains the "capture date" in the metadata ( i beliee most cameras do). We take approximately 1,000 photos a month and would love to have them date stamped.
Our processing is done through Kodak, who will not read the capture data from the metadata and stamp on the photo.
My next option was thir party software - in comes Lightroom 3. Well reading through the forums I found this was possible via LR Mogrify 2. It was installed and it works great. The amount of time I save vs the Gena Photstamper is incredible. The problem I am having now is that Kodak auto crops the pictures before developing which crops the date stamp (located on the bottome right hand corner).
I have selected on the Kodak site "print entire picture" which elliminates the cropping but leaves white bars on the ends of the picture. The reason for this per the Kodak rep is due to photo size. My next step was to go back into Lightroom and set the export size to 1200 X 1800. The result was something close but not exactly that dimension. Which still leaves me with either vertical or horizontal bars on the picture when processed.
If anyone has encountered anything similar or if you have any possible solutions can you please help.May I suggest that you buy a camera that will imprint the date on your
photo and be done with it. There are many point and shoots with good quality
that will do this very thing.
Keep it simple..........
Rich -
How to enter a date stamp using formscentral?
I've been trying to enter a date stamp using formscentral but have no such luck. Whenever I enter one in using acrobat pro I get the error that I don't have sufficent privleges due to adobe keeping the integrety of the form...Anybody have any ideas?
See this FAQ which explain how to modify a FormsCentral PDF in Acrobat
http://forums.adobe.com/docs/DOC-3661
Gen -
How do I add time/date stamp to my screen capture file names?
I'm on mac osx.
I'm trying to add time/date stamp to my screen capture file names. (at the moment it's just 'Picture 1' etc..)
I've tried the following command in terminal but have not had success. please help!!
defaults write com.apple.screencapture name "datestamp" at "timestamp"
killall SystemUIServerSurely someone else will provide a better solution. Meanwhile, however, you might want to try the following script. Copy and paste the script into the AppleScript Editor's window and save it as an application. Then drop your screen capture files on the droplet's Finder icon.
on open theDroppedFiles
tell application "Finder"
repeat with thisFile in theDroppedFiles
set theFileName to name of thisFile
if (word 1 of theFileName is "Picture") and ¬
(word 2 of theFileName = word -2 of theFileName) then
set theExtension to name extension of thisFile
set P to offset of theExtension in theFileName
set theCreationDate to creation date of thisFile
set dateStamp to short date string of theCreationDate
set timeStamp to time string of theCreationDate
set name of thisFile to "Screen Shot " & dateStamp ¬
& " at " & timeStamp & "." & theExtension
end if
end repeat
end tell
end open
Message was edited by: Pierre L. -
Hi,
In a proxy to file(receiver file adapter) scenario, is there any way to append date in a specific format(ddmmyyyy) at the end of the file name.
ex: sample23122009
Add time stamp adds the date in a different format.
If if is possible thru Receiver file adapter operating system command.
Please suggest me how to do that.
thanks.
sriHello Arunsri,
Try to use dynamic file name configuration option in receiver file adapter channel. In mapping just concatenate the date stamp as required with your filename.Take this as constant.
For this you may modify u r target structure. Add one more node as
FileName -- Node
-FileName -- Field
In content conversion use that
FileName.fieldFixedLengths - 0(Zero)
FileName.fixedLengthTooShortHandling -- Cut. So that the extra field would not appear in file.
Hopt it will helps.
Cheers
Veera -
How can i put a time/date stamp in Apple contacts, "Note"
how can i automatically put a time/date stamp in Apple contacts, "Note"
ei , when i enter a new note to a contact. I want the time and date to automatically show at each note.This is not a feature in Contacts. I suggest you send Apple feedback to let them know you would like to see this option.
http://www.apple.com/feedback/macosx.html
You can easily add the date stamp using an app like TextExpander.
Read this article about using snippet keepers. http://www.macworld.com/article/151286/2010/05/clipboardmanagers word -
Hi All:
I have a form that I using to upload my portfolio using the
php insert record function of Dreamweaver. How can I make it add
the date stamp using dreamweaver? Is the a piece of code some can
provide? My thought was add some kinda of hidden field and do
something with that. Any help would be appreciated..oO(cupaball)
>Great! Where does that go in all this Dreamweaver code?
>
> if ((isset($_POST["MM_insert"])) &&
($_POST["MM_insert"] == "portfolio")) {
> $insertSQL = sprintf("INSERT INTO port_tb (comp_name,
design_type, URL,
>short_des, long_des, thumbnail, medium_pic, large_pic,
long_pic) VALUES (%s,
>%s, %s, %s, %s, %s, %s, %s, %s)",
> GetSQLValueString($_POST['comp_name'], "text"),
> GetSQLValueString($_POST['design_type'], "text"),
> GetSQLValueString($_POST['URL'], "text"),
> GetSQLValueString($_POST['short_des'], "text"),
> GetSQLValueString($_POST['long_des'], "text"),
> GetSQLValueString($_POST['thumbnail'], "text"),
> GetSQLValueString($_POST['medium_pic'], "text"),
> GetSQLValueString($_POST['large_pic'], "text"),
> GetSQLValueString($_POST['long_pic'], "text"));
Where do you want the date to go? The date column has to be
listed
inside of the parentheses after "INSERT INTO port_tb", the
NOW() call
inside the VALUES parentheses at the same position. Here's an
example
with the date at the first position (adjust the name as
necessary):
$insertSQL = sprintf("INSERT INTO port_tb (dateField,
comp_name,
design_type, URL, short_des, long_des, thumbnail,
medium_pic,
large_pic, long_pic) VALUES (NOW(), %s, %s, %s, %s, %s, %s,
%s, %s,
%s)",
... // all the rest
Micha -
Date Stamping pics to be printed
I would like to select a number of photos that are going to be printed either with a service or on my printer and add a date stamp to all of the selected photos. All I have been able to do now is edit each picture and add a date on them one at a time.
Is there an easier way that I am missing? Thanks.Ken
Juergen is correct that IrfanView is a wonderful utility that does many things, including your request. Considering it is free, it is amazing the functions it delivers.
However, if you want to add a "date" you can fake it with Process Multiple Files under Files in Editor. There is a Custom Text box that you can write in a text string to look like a date format and select the size and color of the output. I'd suggest a test photo first to check what the output looks like.
If you have not used this function before, it is pretty straight forward. I normally use a different folder for source and destination, just to keep my originals intact. I also set File Type to High Quality JPEG, even if the originals already are HQJ, as I think the default is Medium Size (even if you don't change the File Type). I'd have to retest this assumption.
Maybe you are looking for
-
I want to gwt my itunes onto my new pc, how do I get all those songs over?
-
NEED HELP! Possibly easy question about 'sorting' on your iPod
I can't find the answer anywhere... You know when you sort on 'artist' (or probably anything) on your iPod, if the artist's name is "The Beatles", the artist will be found under the letter "B", not "T". Or if the artist's name is "A Perfect Circle",
-
HTML & XML Code Stripped when loaded to web site
Hi, I just loaded some page changes to my web site and the HTML & XML code was stripped when exported to my web site. I checked the site page code on the web site and it's absent. Has anybody had this happen and/or can anybody help me fix this proble
-
Accessing multidimensional Array using JSTL
Hi there, first of all: I'm a newbie to JSP/JSTL :-) I'm calling a Java-bean from my JSP. In this bean, a 2-dimensional array is created which holds four values per entry. I can access this array from my JSP w/ following code: <jsp:useBean id="feedba
-
Error when inserting transistion
I'm a new user to Final Cut X and every time I attempt to insert a tranistion, an error message comes up saying there is not enough clip to create the transistion without shortening the project. This never happened when using iMovie. What is going on