Date variable error "Missing parameter"

Hello!
I have created a my_date_variable, which is then used in PL/SQL procedure,
e.g., "create table my_test as select #my_date_variable from dual;",
but when I execute this in ODI, I get the following error:
com.sunopsis.sql.SnpsMissingParametersException: Missing parameter
     at com.sunopsis.sql.SnpsQuery.completeHostVariable(SnpsQuery.java)
     at com.sunopsis.sql.SnpsQuery.updateExecStatement(SnpsQuery.java)
     at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(SnpSessTaskSqlS.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.h.y(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Thread.java:619)
Variable has default value, I tried all 3 actions - Historize, Latest Value, Not Persistent.
When I do the same with numeric variable, my test case works perfectly.
So, this problem appears to be only related to date variable, or maybe I just don't know how to use it.
Karlis
Edited by: Karlis on May 26, 2009 8:37 AM

Hi ,
I created the variable #my_date_variable.With Default Value as 2009-01-01 and Not Persistant.
Then i created procedure with follwoing expression.
"create table my_test_aw as select '#my_date_variable' aw from dual"
Table is created with column name as aw and data value as "2009-01-01".
Let me know is this your issue ?
regards,
ashwini

Similar Messages

Error: Missing Parameter Values on

I've started experiencing the "Missing Parameter Values" error on a report containing a subreport. All of my other reports can export just fine, but just not the one with the subreport. The report (and the subreport) both use a stored procedure to retrieve their data, with 4 parameters. The first three parameters are linked directly from the report to the subreport. The 4th parameter is optional, and is linked to the subreport with a Formula Field.
When I delete the subreport, the report exports just fine, so the issue is definitely with the subreport ?configuration?
I'm using Visual Studio 2005, with Crystal Reports for VS 2005. I've been searching the forums, and I downloaded and installed a package: crnet20win32x86_en_chf.zip, but it didn't solve my problem. Just to be sure, I restarted and installed it with nothing running, in case that could be a factor.
Is there anything I can do to work through this? Any other fix I'm missing?
Thanks
Alex

Thanks for the tip. I did that just now, and I found the [Hot Fix|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313339333533393334%7D.do]
That particular Hot Fix describes my situation exactly, in that a report Stored Procedure parameter is "supposed" to be passed on to the Subreport. However, the Hot Fix describes prompting, which isn't occurring in my case, since I'm exporting the report entirely in code. My situation is just the error, Missing Parameter Values.
In any case, I've already run that entire Hot Fix package (twice), and I've found that I have 2 of the crpe32.dlls. Neither one is the version specified in the Hot Fix, (Version 10.2.0.1256). The second dll listed below seems to be of a version prior to the Hot Fix, I don't know if it could be the reason why it still doesn't work after applying the Hot Fix.
C:Program FilesCommon FilesBusiness Objects2.7Bin (Date 1/11/2007, version: 10.2.0.1624) and
C:Program FilesCommon FilesCrystal Decisions2.5Bin (Date 10/5/2005, version: 10.0.5.1177).
I've checked all the versions of references in my projects, and they all reference the 2.7 dlls, but I'd like to know if there is a way to replace the 2.5 version, just in case.
As far as the other search results, they hinted at things I've already tried. What else can I try?
Thanks,
Alex

Error Missing parameter values - I get this in 11g app server only

Hi.. I had an application in JSP-Struts, previously on 10g app server. I now migrated the code into 11g.
I get the error on CrystalViewer.jsp
Error
Missing parameter values
Steps that lead up to the error:
The very first time anyone enters the application and clicks a submit button on the jsp, after entering data and/or picking from drop menus, the error shows up on a separate page (thrown by crystalViewer.jsp)
When I get this error, and click the browsers back button, and simply click the submit button on the jsp screen again, the reports work fine (like they do in 10g).
Tried the following:
I used log4j and followed the data as it made its way from Struts to Crystal Factory. But once it gets out of Struts, and forwards to Crystal, I receive the error from the CrystalViewer.jsp
Next, I removed code in struts-action, that used crystal factory to 'set parameter', and didnt send any parameters, letting my crystal report bring back some random records.. And this works even the first submit! So the problem is only when I have to send parameters to crystsl
Additional info:
I do not send any null values across, since I read on these forums that folks were having issues with setting nulls etc... I check for null and then force 'All' in the parameter if the user does not enter data or pick from the drop-down.
I need help resolving this . Thanks and have a great day.
(Are there any changes to be made to the Struts config, or any additions to Web.xml? Should Crystal reports be changed in anyway so they can function like they did in 10g?)

The Crystal SDK doesn't know or care that you're using Struts.
The exception is stating you're not setting parameters.
So wherever you're trying to set parameters, whatever's reaching the viewer don't have them set.
Why not trace the workflow to see what's where?
Sincerely,
Ted Ueda

Use of layout when more than one parameter - Error Missing Parameter Values

Hi,
Is it possible to use a crystal report which has more than one parameter as the layout for the bill of materials report.
I have 3 parameters
       1. DocKey@       The Bill of Materials to be printed
       2. Number of levels to be printed
       3. type of levels to print.
When I try to print it gives me the error Missing Parameter Values.
I have tried changing the DocKey@ to CodeKey@ but the same error.
Does anyone now where to find a list of these tokens?
Thanks
Chris

I looked at the crystal report conversion to try to find what parameters it used and found none.
I have managed to create and use a crystal report to replace the production order using DocKey@ as the parameter. This works within SAP. However I have converted the system production order to crystal reports and from the converted report I cannot see any parameters at all.
How and where can you find out what paramters you need to use to replace any PLD report? Several reports have multiple selection criteria before the report prints. How can you find out what their tokens are called? I am starting to pull my hair out. I am getting great help from this forum, but do you know any documentation which actually explains this area.
Thanks
Chris

Error Missing Parameter Values

I am very inexperinced in VB and ASP.Net.
That being said I have used forums and tutorials to develop the code below.
In the code I have hard coded some values to be passed to the report for testing...see num_inv and ser_inv.
When I run the code I get an error "Missing Parameter Values".
If I remove the lines that setparamervalues and turn on the enableparamaterpromt the report works fine and I can manually enter the values and see my completed report.
More Details...
The Crystal Report uses an ODBC connection to a SQL Server. I am only using one view to feed the report and there are no subreports. I am buidling the web app in VS2010 with the crystal reports version for VS2010 installed.
Dorry if I didn't give enough information...I don't know what else is relavant.
Any help would be greatly appreciated!
    Private Const PARAMETER_FIELD_NAME_1 As String = "Invoice"
    Private Const PARAMETER_FIELD_NAME_2 As String = "Serial"
    Private Sub WebForm2_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
        ConfigureCrystalReports()
    End Sub
    Private InvoiceReport As ReportDocument
Private Sub ConfigureCrystalReports()
        Dim num_inv As Integer
        Dim num_ser As Integer
        num_inv = 880822
        'Request.QueryString("inv")
        num_ser = 1
        'Request.QueryString("ser")
        InvoiceReport = New ReportDocument()
        Dim reportPath As String = Server.MapPath("S36 Invoice.rpt")
        InvoiceReport.Load(reportPath)
        InvoiceReport.SetParameterValue(PARAMETER_FIELD_NAME_1, num_inv)
        InvoiceReport.SetParameterValue(PARAMETER_FIELD_NAME_2, num_ser)
        CrystalReportViewer1.ReportSource = reportPath
    End Sub

I would start by enabling the parameter prompt and passing the parameters in code. You will only be prompted for the parameters that did not receive an acceptable value. This will let you see if your code to set the values is working for one or neither of your parameters. Calling the setparametervalues method will not return an error if the value isn't accepted.
Also, make sure your datatype is the same as defined in the report, and make sure you have no differences in the parameter names. Note, if the parameters are automatically created in the report because they came from a stored procedure, you need to include the @ symbol in the name as you see in the designer.

Date Variable Error

Hi All,
I created two variables of date datatype, and compared them in a package. However, it didn't work.
Here's what I did for dummy test:
var_d1: SELECT TO_DATE('2000-01-01', 'YYYY-MM-DD') FROM DUAL;
var_d2: SELECT TO_DATE('2008-01-01', 'YYYY-MM-DD') FROM DUAL;
In Package, I set 'Refresh Variable' for each variable step, and during evaluate variable step of var_d2, I used:
...>= '#TEST.var_d1', with or without quote.
The package always returned false for the evaluate variable step, even though it should return true all the time.
Please help.
Thanks!

Hi ,
I created the variable #my_date_variable.With Default Value as 2009-01-01 and Not Persistant.
Then i created procedure with follwoing expression.
"create table my_test_aw as select '#my_date_variable' aw from dual"
Table is created with column name as aw and data value as "2009-01-01".
Let me know is this your issue ?
regards,
ashwini

Error printing Check - "Missing Parameter Values. Error During Printing"

Dear friends,
Our client is in SAP B1 8.81 Pl07 and is facing an error while printing checks designed in Crystal Reports. As soon as they click on "Print" button, we are getting an error "Missing Parameter Values. Error During Printing".
We have checked the Crystal Reports and all the parameters are given.
Can anyone help me regarding this?
Thanks and regards,
Bharath S

hi,
Quoted from Note 1555170
1555170 - Error 'Missing parameter values' printing with CR layout
Symptom
When you print on add any stock transactions document, with Crystal report layout, you receive error message:'Missing parameter values' and then 'Error during the printing; ensure all parameters are defined'
Step by Step scenario:
1.Go to Administration / System Initialization / Print preferences and select the tab per document.
2.Select the document stock transfer and tick the box print document when adding document and click on update.
3.Go to stock management / stock transactions / stock transfer
set the Crystal report template as default.
Note:
- The issue is reproduced also for Goods Receipt and Good Issue.
- The issue is reporduced with any Crystal Report Template for the     above documents.
Cause
Program error
Solution
This issue is candidate for a change in a future release of SAP Business One.
Workarounds:
1.Use PLD for printing the stock transactions.
2.Convert the PLD layout to Crystal reports with Crystal converter.
3.Print the document after adding it.
Other terms
sap business one, printing issues, good issue, good receipt, stock transfer, crystal report, print preferences, print when adding, dockey, missing parameter
Header Data
Released on     07.02.2011 13:27:30
Release status     Released for Customer
Component     SBO-REP-CR Crystal Reports 2008 for SAP Business One
Other Components
SBO-GEN-PRT Printing Issues
Priority     Correction with low priority
Category     Program error
Validity
Software Component
Version
SAP BUSINESS ONE
8.8
8.81
you can download the PLD to Crystal Converter [here|http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/108305a7-1555-2d10-8289-9a178d441c71]
regards,
Fidel

"Missing parameter value" error on autoprinting with CR layout

Hi all, i had recently run into the following:
document layouts that work perfectly from preview and after adding a document, dont work if the document is auto printed on add.
Gives an error:
missing parameter value
And in system messages log:
Error during printing: ensure all parameter values are defined.
With only @dockey token present in the layouts (so no other parameter).
What makes me wonder is that this doesn't happen to all the layouts, most of them works perfectly the same way (only dockey parameter, autoprint is set etc.) but the stock related documents do this on add.
Any ideas?
I found a likely issue in note 1466274 but it's listed as fixed in 8.8 PL 13, we are on PL 15. Could reproduce on PL 18.
Thanks and regards.
Daniel

Hi Gordon.
I could reproduce on the test copy of the db even on different patch levels.
Can this be the almost same issue as stated in the note? I mean same code problem but at another point?
Yesterday i found another example:
uppon exiting the dunning wizard with print and exit option allmost the same error. The difference is that beforehand the same error messages one pops up with the following:
title:Crystal Reports Windows form viewer
"A report application server meghibásodott." (this is even with sap b1 gui langugage set to english)
"The Report application server crashed/broke down(?)"
Will try to test it on the demo database now..
Any ideas?
Thank you.
Regards.
D
Edited by: Daniel Omaisz Takacs on Feb 1, 2011 9:09 AM

"Missing parameter values." -- Export and Print only...

I have a web application and I am using CrystalReportViewer. I am passing several parameters to Crystal using:
report.SetParameterValue(field.Name, Session[field.Name]);
I have session variables which will hold parameters needed to pass into the report. The session variables are populated from controls on my webpage after an onclick event. This even not only populates session, but also passes parameters to the report with the following code:
ReportDocument report = new ReportDocument();
Session["MapPathName"] = "./Reporting/CaseStudy.rpt";
report.FileName = Server.MapPath(Session["MapPathName"].ToString());
ParameterFields fields = new CrystalDecisions.Shared.ParameterFields();
fields = report.ParameterFields;
foreach (ParameterField field in fields)
report.SetParameterValue(field.Name, Session[field.Name]);
CrystalReportViewer1.ReportSource = report;
This works great for reporting and is very extensible. However, when clicking on the "Print" or "Export" buttons on the toolbar I get "Missing parameter values." I attempted to export manually in code using the .ExportToStream function but I still get the error, "Missing parameter values."
I received this error also in Refresh, Search, and Navigate functions. This was corrected by calling a function that supplies the above code block to these functions. However, I do not see any events for controlling the Print nor the Export events.
QUESTION: How can I print or export a report when passing parameters using CrystalReportViewer? Thanks in advance!
P.S. - Crystal Reports XI Release 2
Edited by: KyleSavant on Jun 18, 2009 5:42 PM

There are no Export or Print events accessible for the viewer
Since it sounds like you are creating the reportdocument object in your click event, the settings on this object become out of scope on successive postbacks executed by other events.
to get around this without major changes, you can place your "report" object in session in this event and retrieve it from session on successive postbacks. This should solve your problems around navigation, printing and exporting. What you will need to do is check if the session object exists (usually in page_load or page_initialze) and if so, retrieve it from session and bind it to the viewer's reportsource. If the session object does not exist, then do nothing (ie you have not clicked your button yet that retrieves the parameter values from session and loads the report). Also, in your click event you can check if the report session object exists and if so, remove it so that it can be re-created with your new parameter values (ie i'm assuming the only time you want to set parameter values is in this event).
Dan

Missing parameter in stored procedure

Hi all,
I am new to Crystal Report, and I am facing this situation:
a file .rpt reporting results of a sql server stored procedure, which takes one parameter in input.
This .rpt is invoked by an .net web service, via libraries, passing the parameter.
Now I evolved this stored procedure by adding a new parameter. Each of the two parameter is optional; the stored
procedure returns correctly formatted data with one parameter, the other one, both or none.
Then I adapted the .rpt file so that it can manage the updated stored procedure, via "Verify Database" istruction.
Also the .rpt has obviously two input parameters now, with a default value.
The problem is, the web service acting as handler gives the error "Missing parameter values", because actually it is passing still
one parameter.
If I update the web service code by passing both parameters, even with null value, it works, but for internal reasons I can't deploy
this updated code now
So, there is a way by modifying the .rpt using a stored procedure with two parameters, to make the invocation successfully even with one input parameter ?
The missing parameter would have, in the execution logic now, value null or default; it could fit for me.
Thanks in advance to everyone who will give advice!

Thanks Don for your answer.
Unless you change the SP so it has the logic to accept only one value which depends on the parameter type, if they are both strings for example then your SP can use logic the determine what/which param to fill and null the other one.
What do you mean? Now if I call my stored procedure from SQL Server management studio with this command
EXEC [dbo].[StoredProcedureForCR] @FirstParameter = 2
so, passing only the first parameter, I have no error.
Which improvements to the SP are you suggesting?
If I modify the web service, the CR is working, but I cannot deploy it in production for internal reasons related to the company
Now I am planning these attempts:
- calling the stored procedure via a command
- creating in sql server a view and then filtering results in the report
Do you think they could make sense ?
Have a nice monday!
Lidia

Date Variable in Carryover jobs

Is there a way to lock a date variable, in the parameter, for specific jobs that occasionally carryover?
The goal is to keep the date from flipping when a few specific jobs carryover.

Hi Rick!
you would need to set a variable... remember that parametes are calculated at runtime when the job goes active so you can't use on a job that could potentially carry over... so use a variable that you set like a processing date that flips at 5pm or something then if it did carry over it would retain the date...
Also don't forget that file dependecies that use variables don't work the same way they calculate at insertion into the schedule (so it knows what to watch for) and that when using dates it can get tricky to make sure they match between dependecy and parameters... especially with jobs that may carry over... which is why we try to avoid wherever possinle
Good luck!
Marc

CRVS2010 Beta - Missing parameter values

I want to export my report to pdf file and I want to set some parameters in report in runtime.
But when I try to do it I have exception "Missing parameter values".
Productversion: Visual Studio 2010 + Crystal Report 2008 + service pack v3.
I read that problem was resolved in service pack v2.
But now I don't have any idea how to fix my problem.
I create report and add parameters ("MyParameter") as string.
My test project:
//Load report
//Set db connection
try
                        ParameterValues crParameterValues = report.DataDefinition.ParameterFields["MyParameter"].CurrentValues;
               ParameterDiscreteValue crParameterDiscreteValue = new ParameterDiscreteValue {Value = "SBSUrl"};
               crParameterValues.Clear();
               crParameterValues.Add(crParameterDiscreteValue);
               report.DataDefinition.ParameterFields["MyParameter"].ApplyCurrentValues(crParameterValues);
               report.VerifyDatabase();
               report.Refresh();
                  string reportFileName = string.Format(@"D:\CrystalReport\CRResult-{0}.pdf", DateTime.Now.Ticks);
                  ExportOptions rptExportOption;
                  var rptFileDestOption = new DiskFileDestinationOptions();
                  var rptFormatOption = new PdfRtfWordFormatOptions();
                  rptFileDestOption.DiskFileName = reportFileName;
                  rptExportOption = report.ExportOptions;
                       rptExportOption.ExportDestinationType = ExportDestinationType.DiskFile;
                       rptExportOption.ExportFormatType = ExportFormatType.PortableDocFormat;
                       rptExportOption.ExportDestinationOptions = rptFileDestOption;
                       rptExportOption.ExportFormatOptions = rptFormatOption;
                  report.Export(); // I have exception here ("Missing parameter values.")
             catch (Exception e)
                  Console.WriteLine(e);
          private void SetCurrentValuesForParameterField(ReportDocument reportDocument, ArrayList arrayList)
               ParameterValues currentParameterValues = new ParameterValues();
               foreach (object submittedValue in arrayList)
                    ParameterDiscreteValue parameterDiscreteValue = new ParameterDiscreteValue();
                    parameterDiscreteValue.Value = submittedValue.ToString();
                    currentParameterValues.Add(parameterDiscreteValue);
               ParameterFieldDefinitions parameterFieldDefinitions = reportDocument.DataDefinition.ParameterFields;
               ParameterFieldDefinition parameterFieldDefinition = parameterFieldDefinitions["MyParameter"];
               parameterFieldDefinition.CurrentValues.IsNoValue = true;
               parameterFieldDefinition.ApplyCurrentValues(currentParameterValues);
Could anybody help me with this exception?

Make sure you log on to the database, set the parameter, then export.
See the following KBases:
[1244475 - Error: Missing parameter value when exporting a Crystal Report with optional parameters using the CR .NET SDK|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
[1215426 - Err Msg: Missing parameter value when printing or exporting in VS .NET|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
[1215536 - Err Msg: Missing parameter field current value when exporting/printing in .NET|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
[1216546 - Err Msg: Missing Parameter Field Current Value when viewing a report in VS.NET|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
Also, see the following forum thread for possible solutions:
Passing Parameters CR 2008 VS 2008 ASP.net
Ludek

Missing Parameter - Global Date Variable

I am trying to use a global variable for a date in my interface. I have the variable declared on the schema of my staging area and when I refresh it it works fine. I put the variable as refresh followed by the interface in a package. When I run the package the interface errors on the insert flow into $I table. The error message it is giving me is as follows:
com.sunopsis.sql.SnpsMissingParametersException: Missing parameter
     at com.sunopsis.sql.SnpsQuery.completeHostVariable(SnpsQuery.java)
     at com.sunopsis.sql.SnpsQuery.updateExecStatement(SnpsQuery.java)
     at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.h.y(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Thread.java:619)
If I put a TO_DATE clause around the variable in the target assignment it makes no difference. Also, In the same project we are working on we have alphanumeric and numeric variables working fine. Is there something different about global variables that are dates that's not mentioned in the documentation?
Any help is greatly appreciated as this is really strange that they work for 2 types but not the third.

This is unlikely to have anything to do with Global or Local variables.
The error you are experiencing is usually due to a rouge ':' in the code.
I suspect in this case your date value includes a level of detail that returns some format like DD-MM-YYYY HH24:MI and ODI is choking on the ':'
In this case, the workaround is to enclose your date value in double quotes.
Hope this helps.

Error: Missing initial value for session parameter

Hi,
I'm facing a problem while running the ETL process for Complete 11.5.10 Execution Plan in DAC Client. Some tasks are getting failed beacuse of the following error:-
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: VAR_27026 [Error: Missing initial value for session parameter:[$DBConnection_OLAP].].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6270 [Error: Variable parameter expansion error.].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6163 [Error initializing variables and parameters for the paritition.].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6226 [ERROR: Failed to initialize session [SDE_ORA_Product_Category_Derive_Full]].
ERROR : LM_36320 [Mon Nov 19 21:02:08 2007] : (2108|2632) Session task instance [SDE_ORA_Product_Category_Derive_Full]: Execution failed.
When i checked the parameter file i can see the value assigned to the $DBConnection_OLAP. The same tasks ran successfully when i ran the ETL process for Complete 11.5.10 for the first time. I did not change anything after that and also all these are came built-in with the installation of Oracle BI Applications.
Please anyone give me an idea what is causing the problem.
Thanks,

in DAC > Run History > Task Details, query
Name = SDE_ORA_Product_Category_Temporary
Open Status Description, look for string -lpf, the file after it is the actual parameter file DAC send to INFA server. E.g
-lpf D:\DACTOPUS\Informatica\parameters\SDE_ORAR12_Adaptor.SDE_ORA_Product_Category_Temporary.txt
Open the parameter file, most likely the [session_name] does not match with SDE_ORA_Product_Category_Derive_Full or some parameters are missing.

Missing Parameter Values - C# - Pushing Datatables to feed data to Report

Hello,
I am working on a .NET project to process close to 650 "existing" reports developed in Crystal Reports 8.5. Rendering reports without subreports is working just fine. However I am getting the following error everytime I try to render a report that has multiple subreports
Missing parameter values. at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
Following is how the reports are built.
Main Report - Fed with a Datatable whose name corresponds to the name of the SQL Query configured in Crystal UI
SubReport1 - Fed with a Datatable whose name corresponds to the name of the SQL Query configured in Crystal UI. The subreport is linked to the parent report using one of the fields in the Datatable that is passed to the main report.
Example: the main report receives a datatable with the following fields
EmployeeId (integer), EmployeeName (string)
The subreport receives a datatable with the following fields : EmployeeId (Integer), EmployeeHobbies (string)
The link is established as follows:
SubReportQueryName.EmployeeId link to MainReportQueryName.EmployeeId
_I have checked the data, its correct in terms of the fields required to render the report. The report parameters are being set from the code and ApplyCurrentValues is being called to ensure that the set values are used when rendering the report.
Please note that I am not using live connections to the database
I tried saving a copy of the above mentioned report and removing the subreport and then rendering the report, all works fine. However the moment i introduce the subreport, per the above mentioned report design/architecture all hell breaks loose and i cannot render the report.
The environment is Windows Vista and I am running VS 2008.
Any help is appreciated.
Thanks
Edited by: pkumbhat on Sep 15, 2010 4:43 PM

The issue has been dealt with.
The solution is to set the datasource with a dataset even if the report or subreport expects or is configured to work with a single table.

Date variable error "Missing parameter"

Similar Messages

Maybe you are looking for