Date wise user overview
Hi
Can some one help, how do I see date wise user overview which should contain what are all the tcodes that user had performed in a particular date?
Thanks in advance.
Regards
Activating Security Audit:
1) Go to transaction code SM19
2) SM19 Create a new profile
3) Select options.Give client detail and choose all options in AUDIT class.
4) SAVE
5)Click Yes(Do you want to distribute the profile)
6) Activate the Profile by clicking on the Activate button or Cntrl+F3
7)LOGOUT and again LOGIN
Viewing security Audit:
1) Go to transaction code SM20
2) Select from and to date, User, transaction and Click on "Reread Audit Log"
3) Get the details by clicking read audit log
Similar Messages
-
User status block on Date wise
Dear Experts.....
I have scenario.
Normally user will be using the system whole month.
But by the end of month,Top management will be viewing the reports.
Now my req is
Whether we have any option in Usersatus .
System should block to all users on date wise every month u2026(30,31 date)u2026.(No procurement).
Is it possible.
Regards
ChandraA/c to me in PS we cannot block the user by the virtues of Timeframe.....
If there may be some sort of way out than that would be possible with the help of tehcnical consultant. Say perticular role / authoriasation to user would be dyanamic say before 30th of the month they would have that authorisation and on and after 31 they might be not have that.
That type of development would workout in this case.
Regards
Nitin -
AP Aging report - key date for user entry
Hi All,
We have a requirement to calculate aging buckets like 0-30,31-60,61-90...etc.
I know the key date for this report is created on net due date in SAP standard report.
In standard SAP report , key date is always a system date(SY-DATUM).
What we need for this report is , we need to get all the invoices which are outstanding as of that date(the date which user enters).
If user enters today's date(08/28/07) , he should get all the invoices outstanding till that date in aging buckets and if user enters some date in the past like 07/26/07, he should get all the invoices outstanding as of that date.
Can someone Pls tell me if aging buckets are calculated based on a user entry ?
Regards,
KumarHi Voodi,
Aging in the standard report is being calculated like below...
1.For open items
Posting date<key date
Item status = O
2.Posting date < keydate and clearing date > key date and net due date with offsets on keydate ( key date + 1 - keydate+30 --- for 1-30 days) like wise for all aging buckets.
in this scenarion , key date is always system date ie today's date.
But user wants to get all the invoices based on his user entry...
is this possible with the same standard key date variable or do we need implement any other logic???
Regards,
Kumar -
hi gurus,
Is it possible to see date wise stock of a material? I mean is it
possible to have a material ledger kind of thing in SAP.
thanks in advanceDear Lakshmi reddy,
Goto the T.code:MB5B - Stocks for Posting date
It show the report FROM date to TO date i.e., for perticular month, year
If u want the date wise stock i.e., within the month 1,2,3,.......31
We have to go development report(user exit).
U approch ur ABAPer and explain ur requirement indetail to resolve the issue.
With regards,
B.Ravindranath -
Hi all,
We are devloping one report that will show the inventory of material present on the date specifies by the user.
When we run the report system should output the total inventory say 100, and what is the qty present in 0-6 month(say 40 qty reciept ), 6-12 month (say 50), and 12-24 month (remaining 10 qty).
Bifurcation as per the period mentioned.
User will run the report for any date after go live.
(its been 5 years we are gone live)
What logic i can use here?
If movement type is to be considered what are the movement types for GR
and What movement type i should consider for GI AND REJECTION AND REVERSAL .
PL SUGGEST THE LOGIC FOR THE SAME.
Regards,
AshuHi,
There are some standard reports like MB5B, MC.1 etc, which will give you date wise inventory figures.
If that does not suit your requirement, you can proceed with the customization..
The movement type to be considered for Goods Receipt are
101,(102), 501,(502) 561, 701
Issues - 201,(202) 161, 122, 261,(262), 702
based on your business transactions, there could be other movement types too apart from the above, which you need to cross check.
Regards
Merwyn -
MB5B Report table for Open and Closing stock on date wise
Hi Frds,
I am trying get values of Open and Closing stock on date wise form the Table MARD and MBEW -Material Valuation but it does not match with MB5B reports,
Could anyone suggest correct table to fetch the values Open and Closing stock on date wise for MB5B reports.
Thanks
Mohan MHi,
Please check the below links...
Query for Opening And Closing Stock
Inventory Opening and Closing Stock
open stock and closing stock
Kuber -
Hi Experts,
We want a report Date Wise(As on 31.03.2008) and Storage Location Wise Quantity & Value Report for only Finish Materials. Is there any report ?
From Mb5b we canot get storage location wise report as we get only plant level qty and value.
Pl. guide us.
Regards,
YusufHi Yusuf,
Try the Tcode: MC.9 there enter the site and article and executeYou will get details of the article
stock, value. if you double click the article you will get the details of storage location.
Hope it will be help for you
Regards
GK -
MB5B Report for Date Wise Stock and Value
Hi,
I am Taking MB5B Report for Date Wise Stock and Value.
But I have one doubt all stocks is coming or not in these report like Unrestrected Stock,Return Stock.Blocked stock,Transist stock,Restrected Stock,qty Inspection Stock.
I have another Doubt in these report three Stock type indicaters are there like these.
1.Storage Location / Batch Stock
2.valuated Stock
3.Special Stock.
But i have one doubt what is defferent these
1.Storage Location / Batch Stock
2.valuated StockHi Prasad,
Yes MB5B report consider the Unrestricted, Quality, Blocked, Transit stock and restricted stock. Not sure about Return Stock.
If you select the Storage location/Batch stock radio button then the system will display all the possible stock from the storage location and the corresponding batch also.
If you select Valuated stock radio button then system will show only the valuated stock not the Non-valuated stock. Because Non-valuated material type is available in SAP system will not show those stock suppose if you select the Valuated stock radio button.
Regards
Karthick -
Date Wise Pending Delivery Report
Hi all,
I need a pending delivery report as per the date which user enters. For ex on a particular date what were the pending deliveries and total pending stock which was to be delivered.
Is there any standard report or any Function module available. If not, is there any logic by which we can fulfill this requirement.VL06 gives same data as VL06O/VL06i and gives only real-time delivery status (you can't look at 07/10/2011 date & see what delivery documents were pending PGI, only can see latest delivery status as of now for that date).
So, If "historical" data is needed for past date and status of delivery documents at that time, then need to go with BI report or similar reporting tool where you can set specific parameters like take snap-shot of table(s) of open deliveries due for PGI but not PGI'd on specific date/time. -
Open Date-wise G/L selection
What is the table for selection of G/L Account line item for open items date-wise, I took BSIS table but when i select data for particular date(BUDAT) in my report the amount is mismatch to T_code(fbl3n).
If i want to select the back date data then defiantly that data was cleared as today date and will not found in BSIS table, so please can you help me how to get data for date-wise.
Coz my client want if he select the particular date then what ever unclear (open) item data as on selected date is display.
Thank's & Regard's
Atul Singh
Double-postHello,
Please check the following logic.
e.g.
Posting date : 01.08.2010
Clearing Date : > or = to 01.08.2010.
Put the above logic in the program, so that it'll fetch the open records which are on back date.
Rgds
Murali. N -
Dear All
I am devlop new Stock Report Date wise
my output follows
Material Plant Storagelocaton Saleorder OPenning stock Closing Stock Total
Which Table stored that details?
how will calculated?
Thanks and Regards
Sureshhey
i think the following tables
will be helpful for the report:-
1>MARA
2>MBEWH
3>MSEG
4>VBRP
hope this will help
good luck
harry. -
Hi all Experts,
I am at client site and hav to provide a report containing opening, and closing stock (and issue qty if possible) storage location wise and date option wise.pls help
regards
vikas chhabraHi,
Use MB51 for date wise report
OR
Use MCL1, MCL5, MCL9, MCLD (If Warehouse Management you are using)
OR
You have to develop an own ABAP report.
Regards,
Biju K -
Date wise and ware house wise stock
Hi all,
I want to see the date wise stock and warehouse wise stock for all items. How to do that? I dnnt think there is a system generated report for that.
Ex- form date---- to date----- i want to see what was my instock warehouse wise.
The "Inventory in Warehouse Reports" gives the current inventory only.
I have written a query to find the date wise inventory datewise, but i cannot segment it warehousewise. Please help me. How can it be done?
Regards
RajHi All,
Thanks for your response. Actualy I have explored these areas. But these parameters are alternate to each other. I mean we can generate Warehousewise or Item wise or BPwise........
But I want to have a warehousewise and sumed or grouped itemwise with date selection paramenters.
Moreover i find that when i generate the warehouse wise report (in the other Tab> by- warehose then the report generated is blank!!
Please suggest a alternative.
Regards,
Raj. -
LIST OF STOCK VALUES BALACE REPORTS FOR DATE WISE
Dear friends,
In MB5L T.Code we can get period wise balance reports,but client's requirement is date wise Balance report,could you help me any kind of standard reports for date wise.
Regards,
Sabhapathy RDear Vishal,
Thanks for your reply,mb5b only stock and documents number we can get client want to mb5l with date specific balance reports with GL account's.
Regards,
Sabhapathy R -
Date Wise stock report (0IC_C03)
How can we see the date wise stock quantity and value in Query using cube 0IC_C03.
Example:Suppose i want to see what was my stock quantity and stock value on 25th Jan08.Hi,
Restrict the Key figure value and quantity with the date.
OR
Go to the key figure in RSA1-> Info objects -> Double click on ur key figure-> Go to the aggregation tab Specify exception aggregation as last value and reference char as 0calday.
This will give u the stock on the last day.
If u want to do it in bex
Create a Calculated Key figure put ur key figure in. And right click select the properties select exception aggregation last value and reference char as 0calday.
Khaja
Maybe you are looking for
-
My iPhoto '08 (v 7.1.5) shows a blank screen (no photos). How do I rebuild it from my iPhoto library. Thanks!
-
HT5498 Using the 30 pin adapter unable to access music on the car
Using the 30 pin adapter from mini iPad unable to access music in the car
-
How to stop Firefox messages on home screen?
Since the last up-grade of Firefox for Android, I get unwanted pop-up messages at the foot of my browser 'Awesome' home page. the messages pretend to be helpful but they are just cheesy adverts for something or other e.g. 'Hey, if you want x, you sho
-
So my brother just recently joined the army and someone has stolen his iPhone how can we help him find it ?
-
I bought the cd on my iPad 2 if that makes any difference?!