Dates are not mapped as the Date data type in Universe created on Infoset

Hi,
When i try to create the universe on top of Infoset query, the date fields present as the variables in SAP BI Query are not mapped as date data type in Universe, instead they are considered as Characters, hence the prompts related to those variables are coming s List of values instead of Calendar in WebI.
Can any one pls help me to find the solution on how to map date variables as calendar in Webi Prompts.(For SAP BI Queries created on Infoset)
Edited by: Nisha Makhija on Jul 20, 2009 5:59 PM

Hi Ingo,
Thanks for your response!!
The I Query is built on Top of BW MultiProvider and the InfoObject is of Type DATS.
Actually our Modeling on the BI is as follows :
DSOs> Infoset>Multiprovider->BI query>Universe.
Since we were not able to get the prompts as Calander so We tried Debugging on different Data targets to find the root cause. Please find our observations as follows:
When I tested the same date infoobject(of Type DATS) by creating a BI Query on top of DSO, Infocube & Multiprovider ,the Prompts are working fine as a calander in WEBI Report.
But when the BI Query is built on Infoset data target, In WEBI Report I am getting list of values rather a Calender prompt .
I tested in the Universe that field is appearing as Character instead of Date.
Please guide to resolve this issue.
Thanks,
Nisha.

Similar Messages

  • I just updated my iphone 4 to 5.0.1 and yet i encounter a problem which is that i cannot get to the internet while it always says : you are not subscribed to the cellular data, or it's not been activated. Please help me my carrier is AT

    I just updated my iphone 4 to 5.0.1 and yet i encounter a problem which is that i cannot get to the internet while it always says : you are not subscribed to the cellular data, or it's not been activated. Please help me my carrier is AT

    Check to make sure cellular data is not disabled in settings. If it's on, try re-setting the phone. If that doesn't fix it, call AT&T.

  • Restore from time machine does not list all my backups.  I know they exist but there dates are not present on the restore list.  Any help appreciated.

    Restore from time machine does not list all my backups.  I know they exist but their dates are not present on the restore list.  Any help appreciated.  If I must use one of these older dates to restore, how do I then get the more current data off time machine?

    Ok, so am i correct in saying that the steps to fix are as follows.
    That's one option, but not what I meant by restoring in the time-travel view. The latter is what you get when you enter Time Machine.
    is the fresh install not going to be able to "see" the time machine backups that I have at the moment.
    It should, but sometimes people report that it fails. I'm not sure why that happens.

  • Material availability date can not be after the delivery date

    Dear Experts,
    we are using the following scnario,
    1. Once the user creates the sales order, automatically system creates PO in the background.
    we have created Bapi program for creation of Background PO in SD User Exit.
    The following issue occurs in Prd, DS1, QS1 server, We have done Technical upgradation project, Now when we creates sales order automatically po created with error message of Material availablity date can not be after the delivery date. even sales order no also not updated in the PO.
    QAS server (without technical upgrade) i refered the same input parameter and used the same and create the sales order system generates PO automatically without error message.
    Does any one can through lights on this issue,
    Thanks and Best Regards,
    Muralidharan S

    Hi
    The dates are determined due to shipping and transportation scheduling settings. So check whether the shipping and transportation scheduling is being performed as per the cofiguration settings after Technical upgrade. Since the MAD date should not be after Delivery date but it seems that the dates are not determined properly.
    Also check the Transit  time, Loading time, Pick/Pack time and Lead time are retained as same as before the technical upgrade. Use the QAS server settings to validate the settings in other servers.
    Regards
    Rajkumar K

  • User start date can not be before the current date

    I'm creating users using the Reconciliation engine. The start date attribute doesn't appear to be reconciling. I get many different types of parse errors. The closest I appear to get is when I set the Xellerate User resource object recon field to have Start date as a date field, i receive the error:
    "User start date can not be before the current date.".
    I'm using 9.0.1.1. And I AM trying to create a user that has a start date before todays date.

    Resolution was to patch to 9.0.1.1578

  • Ios 5.1: my calendar dates are not shown in the notification center

    My calendar dates (from today and tomorrow) are not shown in the notification center. Under notifications I have activated the calendar app. What can Ido?

    IOS / is no out for a couple of weeks and Apple seems to be reluctant to fix this problem. As a business device it becomes rediculous to be not able to see my calender entries anymore in the notification center. Is Apple now leaving the business arena and focusing on toys ?

  • Datas are not available to the query when upload a Infopackage

    Hello People,
    I Would like to know what can be the reason ..why the datas are not available when we execute an upload from FlatFile to the Cube (this one is the last target one).
    Considering tere aren´t any poroblem in may target (Cube)
    The system shows us the upload was ok, but the status about the "available datas to the query" was not activated.
    Thanks,
    Rosana.

    Hi ,
    Please go to T code SE16--> Table RSDDAGGR
    Here AggrUID(STARTUID)  give not equal to blank, you will get list of all the cubes which has aggregates.
    If your cybe is in this list , you need to rollup the data to mae this available in reporting.You can rollupp the data by going into Manage of the cube.
    -Vikram

  • Data are Not Uplaod in the BPC server.

    Hi
    Recently I Uploaded   the Data Through the DATAMANAGER in the SAP BPC 5.1 Microsoft Plat Form .
    Its Shows File Transferred Successfully .
    But i cheked In the View Status , DATA was not uplaod .
    What is Cause of Error .
    Regards
    Dayalan M

    Hi,
    I think you are mixing two things. File transferred successfully will of course be displayed when you upload it on the server, but this is not linked at all with the "View Status" window.
    View Status Window refers to packages (import, export, copy...etc..), and this window will display something only when a package has been or is being run.
    You should try Nilanjan's suggestion above. Hopefully it will help you with this functionality.
    Kind Regards,
    Patrick

  • Exchange BPA Errors (Exchange server is a virtual machine but the additional tools are not installed and The 'Services' string type value located in 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14\Setup\Services' registry key is missing)

    Hi,
    I am running BPA on My Exchange 2010 VM (Server 2008 R2 VM on Hyper-V) and get the following errors:
    The 'Services' string type value located in 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14\Setup\Services' registry key is missing or inaccessible. The Microsoft Exchange Information Store service won't start. As a result, all services that depend
    on this service won't be able to start
    Exchange server [Exchange Server FQDN] is a virtual machine but the additional tools are not installed. This configuration is not supported. Install Virtual Machine Additions for this guest.
    Problem is that, for the first, that Key exists and the service is actually running fine. And for the second my VM tools are already installed.
    Hopefully someone out there has had the same issue and can assist.
    Pete

    Hi Pete,
    For the first error message, please try the following steps:
    Make sure the Information Store service is in Starting status,
    Automatic startup type and works well, as a test we can try to
    restart the Infroamtion Store service and verify the service works well.
    Start
    Registry Editor, find the registry key “Services” under “HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14\Setup”, its value is “C:\Program
    files\Microsoft\Exchange Server\v14”(default install location), please check your registry, make sure the key “Services” exist and value is the Exchange Server install location and the
    location is accessible;
    Start
    Registry Editor, and locate the following registry key:
    HKEY_LOCAL_MACHINE\Software\Microsoft\Exchange\Setup
    Use the
    Permission option under the Security tab to check the permission setting on this key. Make sure
    System is in the list with Full Control permissions if the service account is Local System. If you are not using Local System as the service account, check the existence of the corresponding account in the list and ensure that
    it has Full Control permissions. Please refer to this article:
    Title: Exchange Store Does Not Start: Errors 7024, 1026, 9542, and 5000
    Link:
    http://support.microsoft.com/kb/285116
    Start
    ADSI Edit, and then browse to the following location:
    Domain.com/Configuration/Services/Microsoft Exchange/Org/Administrative Groups/AdminGroup/Servers/Server Name
    Right-click the
    server name, and then click Properties.
    Click the
    Security tab, make sure this own server’s server object have
    full control permission on its own server.
    If not or the object is missing, please modify the permission or click
    Add, locate the computer account for the Exchange Server computer, add it to the Permissions list with full control.
    Click OK, and then close ADSI Edit.
    Use
    Active Directory Users and Computers to add the current affected
    Exchange Server computer account to the Exchange Servers(previous version should be “Exchange Domain Servers”) group in the
    Microsoft Exchange Security Groups( or Users) OU. Refer to this article:
    http://support.microsoft.com/kb/297295.
    Restart the Exchange Server computer, then rerun the ExBPA.
    For the second error message, Microsoft don’t recommend to install Exchange Server on virtual machine without additional tools, so the error message occurs. We can just ignore
    this message, it will not affect the Exchange servers.
    Regards, Eric Zou

  • Saved and publieshed Projects are not linking to the enterprise project types

    Hi
    We have 15 enterprise project types, when we create a  project we will select that EPT's and create projects.
    After create the project -- saving and Publishing -- server settings -- change or restart work flow -- it must show the project under the EPT which we selected but the problem is that it is showing all the projects in None.
    We tried to asscoiate the project to the EPT but still it is ssowing up in basic project paln which we are not using.
    Can any one had faced this kind of issue please revert..
    Thanks for the assistance in advance.
    Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

    Usually it means there's a failure in the workflow.  A couple things:
    1) Check the ULS log.
    2) Try creating the projects from a non-SysAdmin account - which typically doesn't have a user profile - which causes workflow to fail.
    3) Try creating an EPT with no workflow and see if you get the same results.
    Andrew Lavinsky [MVP] Blog: http://azlav.umtblog.com Twitter: @alavinsky

  • Number of plays and last play date are not updated in the iPhone 5.

    I am managing music manually, and play music using the regualy player and in my car through blue tooth, but the number of plays doesn't update. I have lists for new music, based on number of plays, and it never changes.

    That doesn't make sense. It works on my iPad and iPod, and used to work on the iPhone. I think something changed in one of the recent updates.

  • Comparing dates (Start date should not be later than End date etc ...)

    Hello All,
      I have a table (5 rows) with 7 columns. Of which the first to columns are the start date and the end date. Can someone kindly advise on how I can go about to ensure that there is some validation mechanism in place such that the start date is not later than the end date and vice versa ? Thank you very much.
    from
    Kwok Wei

    Hi
      Use calculated attributes as Pran suggested. It should work. Where are you getting the data from. Is it from R/3. The node bound to the table ui element is it a model node. Anyway Here is the link on how to use the calculated attribute.
    http://help.sap.com/saphelp_nw04/helpdata/en/7f/a0384162316532e10000000a1550b0/frameset.htm
    regards
    ravi

  • BI content -- Transfer rules are not mapping automatically

    Have  any one come across with this issue.
    We have connected R/3 system  to multiple BI systems.
    Eg:  we have 1 ECC6 & 2 BI systems.
    Business Scenario is .
    I have two different Companyu2019s  A & B in two different Network Domains ( Domain 1 & Domain2 ).
    u201C A u201C Have Ecc6 & BI  in the Network Domain1
    u201C B u201C Have ECC6 & BI in the Network Domain2.
    With in the Individual Domain ECC6 & BI is working Fine.
      Issue : -
    When I connected Company u201C A u201C Ecc6 ( Domain1 ) to Company u201C B u201C BI system ( Domain2 ).
    The connection is showing OK.
    Replication is also OK,
    But  BI content installation have issue, Transfer rules are not mapping automatically with Standard Data sources ( Eg: 0HR_PA_0 ).
    Thanks in Advanceu2026
    @Shaik...
    Pls this is critical issue ... Basis people is saying this is not the issue of Basis..Connection is OK ...SO . it is the issue of BI only.
    any one Advice me ....
    Edited by: shaik on Aug 24, 2008 5:39 PM

    Hi Raghavendra,
    Thanks for Replay,
    Can you explain me how to check the  data mart Connection  ?
    what i am doing is ....
    step 1: Connection is OK.
    step 2 : Replication is OK.
    step 3 : I am going to Install BC Infosource ( Eg: 0HR_PA_1 )
    Grouping -
    In data flow before.
    source system -
    i check the Ecc6 system which is in different domain.
    then i drag the infosource ..... the transfer rules are not mapping ( Not coming )
    pls Advice....
    @ SHAIK...
    Edited by: shaik on Aug 27, 2008 12:41 PM

  • When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

    Problem:
    When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
    Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
    Symptoms:
    1)   Sync:  It’s not completing the sync.  Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options.  I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
    waiting for sync to start (step 1 of 7)
    backing up (step 2 of 7)
    preparing to sync (step 3 of 7)
    determining apps to sync (step 4 of 7)
    preparing apps to sync (step 5 of 7)
    importing photos (step 6 of 7)
    waiting for changes to be applied (step 7 of 7)
    syncing apps / copying 1 of 4 (App name) (step 7 of 7)
    canceling sync
    apple icon
    2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone.  All of the albums are correct/complete in iPhoto.  All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
    3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list.  If I click on Update All, the Apps are successfully updated in iTunes.  But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
    Other Potential Pertinent Info:
    The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago).  Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed.  I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive.  Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself.  However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive.  All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
    Settings/Status:
    MacBook Air
    OSX v. 10.9
    iPhoto ’11 v. 9.5 (902.7)
    iPhone iOS 7.0.4
    iTunes v. 11.1.3 (8)
    Summary Tab
    Backups (This Computer)
    Options
    Automatically sync when this iPhone is connected
    Sync only checked songs and videos
    Photos Tab
    Sync Photos from iPhoto (429 Photos)
    Selected albums, Events, and Faces, and automatically include (no Events)
    Albums – 9 are selected

    You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

  • In IPhoto I changed movie dates after thumb nails were created in IMovie but the new dates are not showing up in IMovie.  Is there someway to refresh the IPhoto event in IMovie?

    Background:  I'm transferring file folders from a Visa laptop via an external hard drive to my IMac.  In the folders are photos and videos from different cameras.  SO I first tried to import to IMovie but it would not recognize any of the files.  So then I imported into IPhoto and both photos and videos were imported and I created events for each folder.  When I first opened IMovie I had to wait for it to create "thumb nails".  Then I could view the events in IMovie BUT the video clips are not together because they have vastly different dates and are mixed with videos from other events.  I looked at the dates and said I can fix that in IPhoto which i did but those new dates are not showing up in IMovie.    I think I need to somehow refresh the event data that Imovie is using but have not found how to do that in either IPhoto or IMovie. 
    I'm doing this on three events with about 100 photos and videos.  But I have many 1000s more to do so need to know how to either fix this or delete these events, reimport, change the dates, then open again in IMovie.   I'm sure that would work but I can't understand why changing the dates in IPhoto is not being reflected in IMovie.  
    Appreciate any tips or pointers.
    OBTW this is my first question as a first time Apple owner. 

    It was suggested I move this question to IPhoto or IMovie which I did. 
    Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
    I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

Maybe you are looking for