Dates for setting DLV and TECO status in production orders

Hi,
I am trying to understand where SAP is holding information on the date of change of status of Proces (or Production) order to TECO or DLV. I think that this information must be held somewhere as based this date is being used to calculate variance for production orders in KKS2 or KKS1 transaction.
Thank you,
Karol

Hi
1. In your Production Order - there is a Line in the 1st screen where you would see a series of Status Like REL DLV TECO SETC, etc
2. you would see a i against the Statuses.. Click it
3. You would see a tab called STATUS, where in all the Statuses are listed
4. Click any of the desired status and then choose MENU Extras > Change docs > For Status
Br, Ajay M

Similar Messages

Function module for calculating planned and actual cost of production order

Hi ,
Do we have any standard function module for calculating planned and actual cost for production order?
i need to implement this in a Z-report.
Thanks
Srini

Hi,
try below function module
CRMCO_GET_PLAN_ACTUAL_COSTS
CO_IH_GET_PLANNED_COSTS_TOTAL
Regards,
Sankaran

TS2972 when i ask for Authorizeed computer i got the message " make sure your computer' date is set correctly and that it accepts cookies from the itunes stores " how can i solve this problem please .

when i ask for Authorizeed computer i got the message " make sure your computer' date is set correctly and that it accepts cookies from the itunes stores " how can i solve this problem please .

Ok, so I just worked out that itunes communicates through your browser so it's a cookie in the browser not PC direct that fixes this. Bit of a convoluted route but for me it was IE>Internet setting>privacy>sites, then allow all activity from apple.com/itunes.

Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY- ERROR EVENT_RAISED - Error updating the process object

Hi All
I have set up a simple custom HCM process and Form regarding Infotype TO CREATE AND CHANGE POSITION. I have checked the process and form consistency and it seems fine. Now when I run the process from HRASR_DT it generates a process number but it also gives an error workflow could not start.I get following error (SWIA log - Step history)
Executing flow work item - Transaction brackets of the workflow has been damaged
Exception occurred - Error when starting work item 000000007031
PROCESS_NODE - Error when processing node '0000000014' (ParForEach index 000000)
CREATE - Error when creating a component of type 'Step'
CREATE_WIM_HANDLE - Error when creating a work item
CREATE_VIA_WFM - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event CREATED and (target) status
EVENT_RAISED - Error updating the process object
Executing flow work item - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY->ERROR
EVENT_RAISED - Error updating the process object
Executing flow work item - Transaction brackets of the workflow has been damaged
Executing flow work item - Work item 000000007031: Object FLOWITEM method EXECUTE cannot be executed
Executing flow work item - Error when processing node '0000000014' (ParForEach index 000000)
Points to be noted:
1) I have searched few SAP notes such as 1384961(Notes for 6.0.4) but our system is in higher level patch 6.0.5
2) WF-BATCH have SAP_NEW and SAP_ALL authorization.
Appreciate your valuable suggestions.
Thanks
Ragav

Hi Ragav
did you try to debug this? maybe something is missing in config of P&F?
Since you are on 605, the following note would be there in your system....use it to debug:
1422496 - Debugging background workflow tasks in HCM P&F
This will help you find the root cause.
regards,
modak

Difference between Due Date for All Tasks and Duration per task in an approval workflow

Hello,
I'm starting to read up and learn about approval workflows in Designer 2010. I am confused by the fields "Due Date for all Tasks" and the "Duration per task". I understand that the Due date for all Tasks is the date that all
of the tasks in the workflow must be completed by. And I understand that the duration means each task has x number of days to complete.
But I dont know whey we need them both. If I have the task duration set to two days and there are 3 tasks involved, then wouldn't the due date be 6 days from the start? Why would I have a due date for all tasks that is completely different than
the sum of the duration of days for each task?
Please help shed some light!

Hi Michelle,
Due date for all tasks, this setting specifies the date by which all tasks are due. It’s used for serial and parallel
task.
Duration per tasks, this setting specifies the date by which an individual
task is due, it’s used for serial workflow participants.
Note, when you create an approval workflow, select task process participants(approvers oob approval workflow), we can also
select once at a time(serial) or all at once(parallel).
For more information, see
http://office.microsoft.com/en-us/sharepoint-server-help/use-an-approval-workflow-HA101793831.aspx
Best Regards.
Kelly Chen
TechNet Community Support

TS1368 The error is saying - make sure your computer date is set correctly and that it accepts cookies from the itunes stores

The error is saying - make sure your computer date is set correctly and that it accepts cookies from the itunes stores. I made sure safari can accept cookies and computer date is set. I have 10.5.8 with Itunes 8

Hello Melzy21,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Best of luck,
Mario

How to get data for current week and previous week using customer exit in Bex.

Hi everyone,
I have a scenario in which I need to display data for current week and previous week (based on "sy_datum" the program has to calculate current week and previous week) in Bex using Customer exit. I have created one variable in Bex Query Designer and I have written code for the variable in CMOD. But it is not working fine, (I know that we can do the same by using offset value in Bex). Can some one guide me how to achieve my requirement using customer exit.
Thanks in Advance,
G S Ramanjaneyulu.

Hi krishna,
Thanks for your quick reply, can you have a look at my code,
case i_vnam.
WHEN 'ZPWK_CWK'.
ranges : pre_week for sy-datum.
data : start_date type DATS,
       end_date TYPE dats .
************FM TO GET FIRST DATE OF CURRENT WEEK ************************
CALL FUNCTION 'BWSO_DATE_GET_FIRST_WEEKDAY'
EXPORTING
    DATE_IN = sy-datum
IMPORTING
    DATE_OUT = start_date.   " WEEK FIRST DATE
end_date = START_DATE + 6.   " WEEK LAST DATE
END_DATE   = START_DATE - 1.   " PREVIOUS WEEK END DATE
START_DATE = START_DATE - 7.   " PREVIOUS WEEK START DATE
**********PREVIOUS WEEK DATES IN PRE_WEEK******************
pre_week-SIGN   = 'I'.
pre_week-option = 'BT'.
pre_week-LOW    = START_DATE.
pre_week-HIGH   = END_DATE.
APPEND pre_week.
CLEAR : START_DATE,END_DATE.
endcase.
Regards,
G S Ramanjaneyulu.

How to populate data for 2LIS_40_REVAL, 2LIS_43_POSCAS and 2LIS_44_POSREC

Hi
How to populate data for 2LIS_40_REVAL, 2LIS_43_POSCAS and 2LIS_44_POSREC datasources at RSA3?
I'm very new to retail BI.
I think there is no setup tables for Retail infosources.
Any IDoc or BAPI activation is required or other procedure?
We are in BI-700 SAPKW70015 support pack R/3 side
and SAP_BW 700 Support pack SAPKW70016 &
BI_CONT 703 Support pack SAPKIBIIP9 BI side
Can anyone guide me how to load data?
Points assured
Thanks in advance
Ramana P

Dear Ramana,
There is no setup table for POSCAS and POSREC.This has to be popuated with a BADI Implementation.
As of PlugIns 2002_1_470 and 2002_2_470, POS data is update into BW the 2LIS_44_POSREC and 2LIS_43_POSCAS extractors using a BADI. To be able to update data into BW, the relevant implementation for the BADI must be activated in each case. You can activate the implementation in transaction SE19. The implementations are as follows:
POS_EX_REC_PI2003_1 for extractor 2LIS_44_POSREC
POS_EX_CAS_PI2003_1 for extractor 2LIS_44_POSCAS
Once the activation of BADI , create the back ground jobs for the 44 application and the data is pushed into Delta queue and it can be loaded into BI .
Hope this helps you.
Thanks,
Krishna Charan

VF01 Determine Billing date for billing index and printout to current date

Hi
we need to determine the Billing date for billing index and printout to current date
What can I do to determine automatically at the time of creation current day to Billing date for billing index and printout?
please let me know
Best Regards,

Hi Beatriz ,
You have two options here. you can chose either of these solutions:
1.
A. T-Code: VTFL ( if using del related billing) For the billing document and delivery, at item level assign the copying requirement 011 or if you are currently using some other routine then you can use following in that
VBRK-FKDAT = SY-DATUM.
B. T-code VTFA (if using order related billing)
Similar to A, using copying requirement 011.
2. You may also try option of Checking in the User Exit for the Program RV60AFZA & RV60AFZA.
Please let us know if this helps
Regards
Harpreet

Bapi - upload data for infotypes 0016 and 0019

hello,
Please let me know bapi to upload data for infotypes 0016 and 0019 as i am unable to find any bapi for this infotypes.
Please use a more meaningful subject in future - I've edited it for you this time.
Edited by: Matt on Nov 6, 2008 12:08 PM

Hi Sunny,
My suggestion is go txcode BAPI.
After this in the left side of the window complete information on BAPIs will be available search out in Human resource you may get the BAPI, in the mean while some one may help you.
Cheers!!
VEnk@

Valid to date for BOM Header and Item

Hello everyone,
I have been searching for "valid-to" date for BOM header and Items since several days but no luck ..
I know we can see it using transactions cs11/cs03 etc. But i wish to know the table where they are stored. As I need to extract them to BW.
Any help will be highly appreciated.
Thanks in advance!
Regards,
Anuj

Hi Anuj
In table STPO,the field AEDAT gets updated only when a change number is used,otherwise the valid to date will be shown nil here.
And also ref the link
Problem finding Valid To Date or Change number to on BOM
pavan

I have a iphone 3gs. while connecting to itune, it advised me to upgrade the phone to ios 6. ii downloaded and upgraded the phone to ios 6.but the phone is not going for set up and not reading the sim. Please advise.

i have a iphone 3gs. while connecting to itune, it advised me to upgrade the phone to ios 6. ii downloaded and upgraded the phone to ios 6.but the phone is not going for set up and not reading the sim. Please advise.

YOu'll have to restore, nothing else you can do.
If you have an older backup you can restore to that.

TS1459 Make sure your computers date is set correctly and that it accepts cookies from the itunes store

Make sure your computers date is set correctly and that it accepts cookies from the itunes store

I have not seen an answer to this....but I am having the same trouble.
ANd tes, the date is set correctly and cookies are on.

Unable to book order in oracle quoting. : APP-236113: Order is not eligible for booking. Check workflow status of this order

Dear All,
I am trying to book an order from oracle quoting. I am getting the following error and unable to proceed.
Please help me.
APP-236113: Order is not eligible for booking. Check workflow status of this order.
Thanks in advance.
Regards,
Gautam.

Gautam,
Check the profile option i.e. is to set the default order status while it is created from Quote.
Regards,
F. Afzal Hussain.

RESA status in production order

Dear all
I want RESA status in production order . wht prerequisities is required and how it wil come ?
plz suggest me

Hi Surendra,
When WIP transaction KKAX is run. WIP is calulated on orders which are released and has cost incured. System creates WIP entry for the entire cost incurred when settlement is run. System sets status "RESA" when WIP is run.
When the WIP is calculated, the system sets the status RESA (Results analysis carried out). The system uses this status to select the orders for which work in process has been calculated.
Hope clear to you.
Regards,
R.Brahmankar

Dates for setting DLV and TECO status in production orders

Similar Messages

Maybe you are looking for