Dates for this sessiions are overdue-Sap ealy watch report
Hi all,
I have too many sessions scheduled for EWA one if my system in Landscape wit Red flags & i wanted to remove them as they are with very old Dates.I couldn't manage to find any option pls advice me on that.
How can i remove OLD EWA with RED flags
Hi val,
navigated as u said .,
Once i press delete button i could be able to delete only the session where my early watch report is generated.
But as i wanted to delete the sessions which are in past date with red flag
for example if i click on red flag i get the following data
The data for this session is overdue. Data has not yet been transferred from the associated satellite system.
Go to the Service Data Control Center (transaction SDCCN) in the satellite system and check why the data has not been sent.
Typical sources of errors are:
The RFC connection for the SAP Solution Manager system is not working.
The 'Task Processor' background job, which collects the session data, has been changed.
Problems arose while data was being collected (see the detail log for the task that collects the session data).
A periodic 'SDCC Maintenance Package' task has not been scheduled to check whether your SAP Solution Manager system requests session data.
Session number: 5550000000878
Back Call Service Data Control Center
As i dont require this over due seesions How can i delete them
Similar Messages
-
EWA" Dates for this session are overdue "
Dear All,
Im now configuring EWA report but i always got Red Flag for the satillite system said that "Dates for this session are overdue" and there is no two bottle apear. please help me..
Thanks so much.Hi,
That error is because your managed system is not sending the required EWA data to your SolMan for processing.
Please check the following to make sure all steps are correct for EWA processing:
Check RFCs in Solution Manager to your system that the EWA is for.
Also check the Back RFC to SolMan in the managed system.
Also check in the managed system, transaction SDCCN and make sure the maintenance package is running and scheduled periodically!
Finally ensure the Task Processor is active and scheduled in SolMan via transaction SDCCN > Goto > Settings > Task Processor.
Lastly check in the managed system that the RFC for the maintenance package is set to your SolMan via transaction SDCCN > Goto > Settings > Task Specific > icon next to RFC Destinations > Settings. Ensure the Back RFC to SolMan is set as the master.
To do this, go to SMSY in SolMan > Environment > SolMan Operations > Administration SDCCN and ensure your managed system is there and SolMan is the master.
You may even have outstanding jobs for this system in SDCCN of SolMan which you can run to process the EWA data if you do not have a periodic Maintenance Package correctly running in SolMan.
All of these checks will solve your issue and make sure EWA is working.
If you find the answer, please post what the mistake was, I am curious
Regards,
-Rohan
Edited by: Rohan Parikh on Dec 9, 2009 4:42 PM -
Unable to install SQL Server Express 2008 R2 - Errors "Failed to retrieve data for this request"
As domain admin I am attempting to install "SQL Server 2008 R2 with SP2" but it keeps failing with "Failed to retrieve data for this request".
The installation never actually starts, it errors before then.
It displays the same error even if I run the System Configuration Checker.
The summary.txt for the install displays the following text:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -1554760125
Exit facility code: 852
Exit error code: 15939
Exit message: Failed to retrieve data for this request.
Start time: 2014-08-15 16:49:52
End time: 2014-08-15 16:50:06
Requested action: RunRules
Machine Properties:
Machine name: servername
Machine processor count: 8
OS version: Windows Server 2008 R2
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: Yes
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 1
Installation location: c:\84122ef5b6d9cdcd3b2ac48cec\x64\setup\
Installation edition: EXPRESS
User Input Settings:
ACTION: RunRules
CONFIGURATIONFILE:
ENU: True
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES:
HELP: False
INDICATEPROGRESS: False
INSTANCENAME: <empty>
PASSPHRASE: *****
QUIET: False
QUIETSIMPLE: False
RULES: GLOBALRULES,SqlUnsupportedProductBlocker,PerfMonCounterNotCorruptedCheck,Bids2008InstalledCheck,BlockInstallSxS,AclPermissionsFacet,FacetDomainControllerCheck,SSMS_IsInternetConnected,FacetWOW64PlatformCheck,FacetPowerShellCheck
UIMODE: AutoAdvance
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140815_164944\ConfigurationFile.ini
Detailed results:
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: The rule result report file is not available.
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
Message:
Failed to retrieve data for this request.
Data:
HelpLink.ProdName = Microsoft SQL Server
HelpLink.BaseHelpUrl = http://go.microsoft.com/fwlink
HelpLink.LinkId = 20476
DisableWatson = true
Stack:
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String machineName)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath, String clusterDiscoveryDocRootPath)
at Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String actionId)
at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
Inner exception type: Microsoft.SqlServer.Configuration.Sco.SqlRegistryException
Message:
The network path was not found.
Data:
WatsonData = [email protected]rror
Stack:
at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.CreateBaseKey(ServiceContainer ctx, String machineName, IntPtr hKey, String keyName, RegistryAccess access, RegistryView
view)
at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocalMachine(ServiceContainer ctx, String machineName, RegistryAccess access, RegistryView view)
at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String machineName, RegistryView regView)
at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)Inner exception type: Microsoft.SqlServer.Configuration.Sco.SqlRegistryException
Message:
The network path was not found.
Data:
WatsonData = [email protected]rror
Above message says that your registry is not consistent and some of the parameters are missing from registry.Or
Account installing SQL server does not have permission to access this. I think case can be here that account with which you logged into your system to install SQL Server might not have certain privileges. Can you take help
of domain admin account add it as a local administrator in this machine always right click on setup file and select run as administrator. Before this make sure you remove all SQL Server components from add remove program
I strongly recommend you to have a good look at below thread
http://support.microsoft.com/kb/2000257/en-us
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
Hi all,
Has anyone come across SQL Server 2012 SP1 CU8/9 failing to install with a “Failed to retrieve data for this request.” error.
The error is too generic for a useful search on web, for me at least anyway.
Had no problems patching a whole bunch of other servers in the same environment.
I’m no good at reading these error logs. For some reason the primary replica is referenced in the detailed log???
The CU8/9 patch has been run by both Domain Admins and local Admin with no luck.
We are trying to patch a secondary failover replica. (SharePoint 2013 is installed on this server.)
This is from the summary log:
Overall summary:
Final result: The patch installer has failed to update the shared features. To determine the reason for failure,
review the log files.
Exit code (Decimal): -2146233088
Exit facility code: 19
Exit error code: 5376
Exit message: Failed to retrieve data for this request.
Start time: 2014-04-10 11:51:11
End time: 2014-04-10 11:51:49
Requested action: Patch
Exception help link:
http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3412.0&EvtType=0xB2652E58%400xDC80C325&EvtType=0xB2652E58%400xDC80C325
Machine Properties:
Machine name: VMSPDB2
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: Australia
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: Yes
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered Configured
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database
Engine Services 1033 Enterprise Edition
11.1.3000.0 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server
Replication 1033 Enterprise
Edition 11.1.3000.0 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text
and Semantic Extractions for Search 1033 Enterprise Edition 11.1.3000.0 No
Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data
Quality Services 1033
Enterprise Edition 11.1.3000.0 No Yes
SQL Server 2012
Management Tools - Basic 1033
Enterprise Edition 11.1.3000.0 No Yes
SQL Server 2012
Management Tools - Complete 1033 Enterprise Edition
11.1.3000.0 No Yes
SQL Server 2012
Client Tools Connectivity 1033 Enterprise Edition
11.1.3000.0 No Yes
SQL Server 2012
SQL Server Data Tools 1033
Enterprise Edition 11.1.3000.0 No Yes
SQL Server 2012
Integration Services 1033
Enterprise Edition 11.1.3000.0 No Yes
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 1
KBArticle: KB2931078
KBArticleHyperlink:
http://support.microsoft.com/?kbid=2931078
PatchType: QFE
AssociatedHotfixBuild: 0
Platform: x64
PatchLevel: 11.1.3412.0
ProductVersion: 11.1.3000.0
GDRReservedRange: 10.0.1000.0:10.0.1099.0;10.0.3000.0:10.0.3099.0
PackageName: SQLServer2012-KB2931078-x64.exe
Installation location: e:\90a192411a98d1f6dc\x64\setup\
User Input Settings:
ACTION: Patch
ALLINSTANCES: false
CLUSTERPASSIVE: false
CONFIGURATIONFILE:
ENU: false
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTANCEID: <empty>
INSTANCENAME: <empty>
QUIET: false
QUIETSIMPLE: false
SQMREPORTING: false
UIMODE: Normal
X86: false
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: The rule result report file is not available.
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
Message:
Failed to retrieve data for this request.
HResult : 0x80131500
Data:
HelpLink.ProdName = Microsoft SQL Server
HelpLink.BaseHelpUrl =
http://go.microsoft.com/fwlink
HelpLink.LinkId = 20476
HelpLink.EvtType =
0xB2652E58@0xDC80C325
DisableWatson = true
Stack:
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String machineName)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectDiscoveryData(String machineName)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath, String clusterDiscoveryDocRootPath)
at Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String actionId)
at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun, ServiceContainer context)
Inner exception type: System.ComponentModel.Win32Exception
Message:
Not all privileges or groups referenced are assigned to the caller.
HResult : 0x80004005
Error : 1300
Stack:
at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean enable)
at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String privilege)
at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer ctx, String machineName, SqlRegistryKey
key)
at Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer ctx, String machineName, SqlRegistryKey
machineKey, String registryPath, RegistryView regView, String regPath, RegistryAccess registryAccess, Boolean& alreadyCached)
at Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer ctx, String machineName, RegistryView regView,
String regPath, RegistryAccess registryAccess)
at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String machineName, RegistryView regView)
at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req, Object ci)
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
And the tail of the detailed log:
(01) 2014-04-10 11:51:29 Slp: Completed Action: InitializeMsiExtension, returned True
(01) 2014-04-10 11:51:30 Slp: ----------------------------------------------------------------------
(01) 2014-04-10 11:51:30 Slp: Running Action: AddPackageModifierSourcesAction
(01) 2014-04-10 11:51:30 Slp: Completed Action: AddPackageModifierSourcesAction, returned True
(01) 2014-04-10 11:51:30 Slp: ----------------------------------------------------------------------
(01) 2014-04-10 11:51:30 Slp: Running Action: InitializeConfigAction
(01) 2014-04-10 11:51:30 Slp: Completed Action: InitializeConfigAction, returned True
(01) 2014-04-10 11:51:30 Slp: ----------------------------------------------------------------------
(01) 2014-04-10 11:51:30 Slp: Running Action: RunRemoteDiscoveryAction
(01) 2014-04-10 11:51:31 Slp: Running discovery on local machine
(01) 2014-04-10 11:51:33 Slp: Discovery on local machine is complete
(01) 2014-04-10 11:51:33 Slp: Running discovery on remote machine: VMSPDB1
(01) 2014-04-10 11:51:35 Slp: Discovery on VMSPDB1 failed due to exception
(01) 2014-04-10 11:51:36 Slp: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException: Failed to retrieve data for this request. ---> System.ComponentModel.Win32Exception: Not all privileges or groups referenced are
assigned to the caller.
at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean enable)
at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String privilege)
at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer ctx, String machineName, SqlRegistryKey key)
at Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer ctx, String machineName, SqlRegistryKey machineKey, String registryPath, RegistryView regView, String regPath, RegistryAccess
registryAccess, Boolean& alreadyCached)
at Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer ctx, String machineName, RegistryView regView, String regPath, RegistryAccess registryAccess)
at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String machineName, RegistryView regView)
at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req, Object ci)
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
--- End of inner exception stack trace ---
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String machineName)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectDiscoveryData(String machineName)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath, String clusterDiscoveryDocRootPath)
(01) 2014-04-10 11:51:36 Slp: Error: Action "Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction" threw an exception during execution.
(01) 2014-04-10 11:51:36 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: Failed to retrieve data for this request. ---> Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException: Failed to
retrieve data for this request. ---> System.ComponentModel.Win32Exception: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean enable)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String privilege)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer ctx, String machineName, SqlRegistryKey key)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer ctx, String machineName, SqlRegistryKey machineKey, String registryPath, RegistryView
regView, String regPath, RegistryAccess registryAccess, Boolean& alreadyCached)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer ctx, String machineName, RegistryView regView, String regPath, RegistryAccess registryAccess)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String machineName, RegistryView regView)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req, Object ci)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
(01) 2014-04-10 11:51:36 Slp: --- End of inner exception stack trace ---
(01) 2014-04-10 11:51:39 Slp: Received request to add the following file to Watson reporting: C:\Users\HS2\AppData\Local\Temp\tmp6614.tmp
(01) 2014-04-10 11:51:39 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
(01) 2014-04-10 11:51:39 Slp: Inner exceptions are being indented
(01) 2014-04-10 11:51:39 Slp:
(01) 2014-04-10 11:51:39 Slp: Exception type: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
(01) 2014-04-10 11:51:39 Slp: Message:
(01) 2014-04-10 11:51:39 Slp: Failed to retrieve data for this request.
(01) 2014-04-10 11:51:39 Slp: HResult : 0x80131500
(01) 2014-04-10 11:51:39 Slp: Data:
(01) 2014-04-10 11:51:39 Slp: HelpLink.ProdName = Microsoft SQL Server
(01) 2014-04-10 11:51:39 Slp: HelpLink.BaseHelpUrl =
http://go.microsoft.com/fwlink
(01) 2014-04-10 11:51:39 Slp: HelpLink.LinkId = 20476
(01) 2014-04-10 11:51:39 Slp: Stack:
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String machineName)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectDiscoveryData(String machineName)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath,
String clusterDiscoveryDocRootPath)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String actionId)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun, ServiceContainer
context)
(01) 2014-04-10 11:51:39 Slp: Inner exception type: System.ComponentModel.Win32Exception
(01) 2014-04-10 11:51:39 Slp: Message:
(01) 2014-04-10 11:51:39 Slp: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:39 Slp:
(01) 2014-04-10 11:51:39 Slp: HResult : 0x80004005
(01) 2014-04-10 11:51:39 Slp: Error : 1300
(01) 2014-04-10 11:51:39 Slp: Stack:
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean
enable)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String privilege)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer
ctx, String machineName, SqlRegistryKey key)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer ctx,
String machineName, SqlRegistryKey machineKey, String registryPath, RegistryView regView, String regPath, RegistryAccess registryAccess, Boolean& alreadyCached)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer
ctx, String machineName, RegistryView regView, String regPath, RegistryAccess registryAccess)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String
machineName, RegistryView regView)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req, Object ci)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
(01) 2014-04-10 11:51:44 Slp: Watson Bucket 2
Original Parameter Values
(01) 2014-04-10 11:51:44 Slp: Parameter 0 : SQL Server
2012@RTM@KB2931078
(01) 2014-04-10 11:51:44 Slp: Parameter 1 : Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process
(01) 2014-04-10 11:51:44 Slp: Parameter 2 : Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege
(01) 2014-04-10 11:51:44 Slp: Parameter 3 :
Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException@-2146233088
(01) 2014-04-10 11:51:44 Slp: Parameter 4 :
System.ComponentModel.Win32Exception@-2147467259
(01) 2014-04-10 11:51:44 Slp: Parameter 5 : RunRemoteDiscoveryAction
(01) 2014-04-10 11:51:44 Slp: Parameter 8 : 1300
(01) 2014-04-10 11:51:44 Slp:
Final Parameter Values
(01) 2014-04-10 11:51:44 Slp: Parameter 0 : SQL Server
2012@RTM@KB2931078
(01) 2014-04-10 11:51:44 Slp: Parameter 1 : 0x6785B09D
(01) 2014-04-10 11:51:44 Slp: Parameter 2 : 0xB2652E58
(01) 2014-04-10 11:51:44 Slp: Parameter 3 : 0x74E34741
(01) 2014-04-10 11:51:44 Slp: Parameter 4 : 0xDC80C325
(01) 2014-04-10 11:51:44 Slp: Parameter 5 : RunRemoteDiscoveryAction
(01) 2014-04-10 11:51:44 Slp: Parameter 8 : 0xA05EFA62
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Microsoft_Microsoft SQL
Server.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key Uninstall to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key MSSQLServer to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Wow6432Node_Microsoft_Microsoft
SQL Server.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key Uninstall to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Wow6432Node_Microsoft_Windows_CurrentVersion_Uninstall.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key MSSQLServer to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Wow6432Node_Microsoft_MSSQLServer.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:46 Slp: Failed to retrieve data for this request.
(01) 2014-04-10 11:51:46 Slp: Watson bucket for exception based failure has been created
(01) 2014-04-10 11:51:46 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
(01) 2014-04-10 11:51:46 Slp: Sco: Attempting to open registry subkey Software\Microsoft\Microsoft SQL Server\110
(01) 2014-04-10 11:51:46 Slp: Sco: Attempting to get registry value EnableErrorReporting
(01) 2014-04-10 11:51:46 Slp: WER: Successfully read app consent from registry Software\Microsoft\Microsoft SQL Server\110\EnableErrorReporting=0.
(01) 2014-04-10 11:51:46 Slp: WER: Application level consent value '0' was mapped to consent status 'WerConsentDenied'
(01) 2014-04-10 11:51:46 Slp: WER: Result of the submission:: 'WerDisabled'
(01) 2014-04-10 11:51:46 Slp: WER: Submitted 1 of 1 failures to the Watson data repository
(01) 2014-04-10 11:51:46 Slp: Sco: File 'C:\Windows\system32\Cluster.exe' does not exist
(01) 2014-04-10 11:51:46 Slp: Failed to collect cluster logs, cannot find Cluster.exe under system directory.
(01) 2014-04-10 11:51:46 Slp: Dumping final cluster state.
(01) 2014-04-10 11:51:49 Slp: Completed dumping final cluster state.
(01) 2014-04-10 11:51:51 Slp:
(01) 2014-04-10 11:51:51 Slp: ----------------------------------------------------------------------
(01) 2014-04-10 11:51:51 Slp:
(01) 2014-04-10 11:51:51 Slp: Error result: -2146233088
(01) 2014-04-10 11:51:51 Slp: Result facility code: 19
(01) 2014-04-10 11:51:51 Slp: Result error code: 5376
(01) 2014-04-10 11:51:51 Slp: SQM Service: Sqm does not have active session.Hello SQL Ranger,
Thanks for posting the detailed log. I dont have exact solution for this but I can give you some hint what could be reason patch has failed below message points to fact that there is some issue with account which is used to install CU patch.Have alook at
below log.It says that when patch was trying to get details from other node in cluster it was not able to.
01) 2014-04-10 11:51:33 Slp: Discovery on local machine is complete
(01) 2014-04-10 11:51:33 Slp: Running discovery on remote machine: VMSPDB1
(01) 2014-04-10 11:51:35 Slp: Discovery on VMSPDB1 failed due to exception
(01) 2014-04-10 11:51:36 Slp: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException: Failed to retrieve data for this request. ---> System.ComponentModel.Win32Exception: Not all privileges or groups referenced are assigned to the caller.
IMO I strongly feel it is issue with the account. Microsoft has also documented about this for SQL Server 2008 .Have a look at following links
http://support.microsoft.com/default.aspx?scid=kb;en-US;2000257
Please also assign privilege mentioned in below link
http://www.bradg.co.za/?p=12
Hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
What this mean? "could not rasterize because the pixel data for this layer is not"
I've taken a color picture and made it black and white by doing the following: Layer>New Adjustment Layer>Hue/Saturation. I brought the saturation down to -100. The pencil is selected and my foreground color is black.
When I try to select the flowers in my picture to bring out their color (within the black and white image), I get a circle with a black line thru it and the error message "could not rasterize because the pixel data for this layer is not directly editable". The steps I followed are working for most of my team but some of us are getting this error message.
Any idea why and/or how to fix it?Ah, thank you! I didn't have the mask selected. So once I did select it, the color came thru like magic.
-
I am trying to install iTunes in my 64 bit Windows 7 PC. My PC runs normal. But when I try to install Itunes from Apple website, I get a message "The Configuration data for this product is Corrupt contact your support personneI" I
am so disgusted,please help!!!Hey madnest,
Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Issues installing iTunes or QuickTime for Windows
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
Trying to install j2SE 1.4.2_03 JRE on a Windows system (exact version needed for a bussiness application) after all previous Java installations have been deleted and all Windows Registry Java related keys have been manually deleted with Regedit.exe.
The EXE installer works properly in other machines but in this one it stops after a few seconds with the following message:
"The configuration data for this product is corrupt. Contact your support personnel".
The problem is related to the Windows install mechanism rather than the Java installer itself and likely caused by the manual Registry deletion.
The error code is 1610: ERROR_BAD_CONFIGURATION.
Reinstalling Windows didn't fix the problem.
Unable to recover the system to a previous state with the System Recovery Tool (Accesories/System Tools).
Other versions of Java installers fail the same way and show the same message.
I don't know how to contact "my support personnel" nor who they are.
I'd appreciate any help about this problem or what Java installers need within the Registry to work or a clue of any kind.Sorry for the duplicated message. It's my first post and I messed up a little with the right section.
A new downloaded copy of the file or other versions of Java failed to install with the same error message.
I've learned there is a product ID in the registry that must be present for the installer to run. I'm searching for this "mysterious" product ID and how to set the right Windows XP Registry entry for the JSE 1.4.2_03 version.
I'm still not sure this will fix the problem.
Thanks for replying. -
Trying to install j2SE 1.4.2_03 JRE on a Windows XP system (exact version needed for a bussiness application) after all previous Java installations have been deleted and all Windows Registry Java related keys have been manually deleted with Regedit.exe.
The EXE installer works properly in other machines but in this one it stops after a few seconds with the following message:
"The configuration data for this product is corrupt. Contact your support personnel".
The problem is related to the Windows install mechanism rather than the Java installer itself and likely caused by the manual Registry deletion.
The error code is 1610: ERROR_BAD_CONFIGURATION.
Reinstalling Windows didn't fix the problem.
Unable to recover the system to a previous state with the System Recovery Tool (Accesories/System Tools).
Other versions of Java installers fail the same way and show the same message.
I don't know how to contact "my support personnel" nor who they are.
I'd appreciate any help about this problem or what Java installers need within the Registry to work or a clue of any kind.Sorry for the duplicated message. It's my first post and I messed up a little with the right section.
A new downloaded copy of the file or other versions of Java failed to install with the same error message.
I've learned there is a product ID in the registry that must be present for the installer to run. I'm searching for this "mysterious" product ID and how to set the right Windows XP Registry entry for the JSE 1.4.2_03 version.
I'm still not sure this will fix the problem.
Thanks for replying. -
Hi,
This is my first post here.
My exchange server of late is facing a peculiar problem. I get the error message that I have posted below when sending mails to any outside domain. However when I restart the server the mails can be resend to the address without any issue. After a certain
time again the issue pops up upon which I am forced to restart the server again. I am running 2007 Exchange on Windows 2003.
Generating server: name.mydomain.com
[email protected]
#554 5.4.4 SMTPSEND.DNS.MxLoopback; DNS records for this domain are configured in a loop ##
[email protected]
#554 5.4.4 SMTPSEND.DNS.MxLoopback; DNS records for this domain are configured in a loop ##
Original message headers:
Received: from name.mydomain.com ([1xx.xxx.xxx.xx5]) by MHDMAILS.mouwasat.com
([1xx.xxx.xxx.xx5]) with mapi; Wed, 19 Oct 2011 08:56:29 +0300
From: <[email protected]>
To: <[email protected]>
CC: "Al Alami,Tareq" <[email protected]>
Date: Wed, 19 Oct 2011 08:56:27 +0300
Subject: RE:
Thread-Topic:
Thread-Index: AcyAQ5tu8z9CvBfdT5+1pcGQkk6x0AIuwczAAAGZjeABQyW5sAADeeJQAAETNDA=
Message-ID: <[email protected]>
References: <[email protected]com>
<[email protected]com>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach: yes
X-MS-TNEF-Correlator:
acceptlanguage: en-US
Content-Type: multipart/related;
boundary="_004_EEC8FA6B3B286A4E90D709FECDF51AA06C0588CA11namedomain_";
type="multipart/alternative"
MIME-Version: 1.0On Sun, 23 Oct 2011 15:05:15 +0000, Jobin Jacob wrote:
>
>
>Even af
>
>ter removing my domain from the send connector I continue to receive the error. I would like to say I do have a firewall, Cyberoam. However, it was the same configuration till now in the firewall. I did try Mx lookup and found the following.
>
>Could there be any other solution to this issue ?
Sure, but it's necessary to ask a lot of questions since none of us
know how your organization is set up.
I see you also have "Use the External DNS Lookup settings on the
transport server" box checked. How have you configured the "External
DNS Lookups" on the HT server's property page? Is there any good
reason why you aren't just using your internal DNS servers? If the
internal DNS servers are configured to resolve (or forward) queries
for "external" domains then there's no reason to use that checkbox. In
most cases checking that box is a mistake.
http://technet.microsoft.com/en-us/library/aa997166(EXCHG.80).aspx
The behavior you describe (it works for a while and then fails;
restarting the server returns it to a working state) sure sounds like
some sort of DNS problem.
Rich Matheisen
MCSE+I, Exchange MVP
--- Rich Matheisen MCSE+I, Exchange MVP -
Management Portal unavailable - "cannot load management data for this resource type"
Noticing that with the exception of virtual machines, every resource type in the (non preview) Azure Management Portal is showing a sad pink icon and the help text "cannot load management data for this resource type."
So that's a near total portal outage for us. Anybody else experiencing this?
I've attempted to open a ticket with developer support but I'm not sure if that's the right channel.
BrianHi Brian,
Thanks for your posting!
From Dashboard shown (http://azure.microsoft.com/en-us/status/#history), Currently, the Azure portal works fine in every regions.
So I suggest you can submit a tick via this channel:
http://www.windowsazure.com/en-us/support/contact/
Also, you can click your right-top account name and select the "Microsoft Support" item to create free ticket.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Where we maintain data for this Table T015W in SPRO
Hi Gurus,
I wanted to know that where we maintain data for this table T015W.
This Table relates to banking.Hello,
You could maintain the instruction keys in SPRO under the path
Financial Supply Chain Management > Treasury and Risk Management > Basic Functions > SAP Business Partner for Financial Services > Settings for Financial Services > General Settings > Basic Settings > Define Instruction Keys
Kind regards,
Vinodh -
Recent iOS update has made my iPad 2 unusable. The screen locks up. It's very laggy and web pages do not load correctly. Is there a fix for this or are they even working on a fix.
Try some basic troubleshooting:
(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
(C) Setup as new (data will be lost if you do not have backup)
Settings>General>Reset>Erase all content and settings -
Failed to retrieve data for this request.
Failed to retrieve data for this request. (Microsoft.SqlServer.Management.Sdk.Sfc) \CREATE FILE encountered operating system error 5(Access is denied.) while attempting to open or create the physical file 'D:\SAP\MDF_LDF\BatchMasterLicenseManager.mdf'.
(MTITLE: Microsoft SQL Server Management Studio
Failed to retrieve data for this request. (Microsoft.SqlServer.Management.Sdk.Sfc)
For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
CREATE FILE encountered operating system error 5(Access is denied.) while attempting to open or create the physical file 'D:\SAP\MDF_LDF\BatchMasterLicenseManager.mdf'. (Microsoft SQL Server, Error: 5123)
For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.50.1600&EvtSrc=MSSQLServer&EvtID=5123&LinkId=20476
BUTTONS:
OKYes, that is the solution now for attaching a database.
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles -
Have use WinRAR to pull out only Bonjour64 from iTunes 11.1.5 (and prior releases) to do an install of only Bonjour, as all other iTunes-related software loads fine (have used 11.1.4 and new 11.1.5). I get the error: "The configuration data for this product is corrupt. Contact your support personnel." Have tried everything suggested on net and this forum, including uninstalling everything, cleaning registry, disabling firewall, etc. Not worthwhile to reinstal Windows 7. What do I do?
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page). Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Printer : Officejet Pro 8600 Premium. model CN577A
OS : Microsoft Windows 7 Home
Basic 64
How is your product connected to your PC? : Network
Problem description : In Device Manager I've got an error message with the
Officejet pro 8600 icon - "The drivers for this device are not installed.
(Code 28)
There is no driver selected for the device information set or element." I
have uninstalled and re-installed the driver to no effect. The printer
appears to be functioning properly.
This question was solved.
View Solution.Hello,
Yes, i too would suggest a clean re-installation of the software.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.
Maybe you are looking for
-
How do i import emails from outlook 2013 on windows 8.1?
I'm using the tools: import but i get the following error after i select the type of file that i would like to import (i select outlook): Microsoft Office Outlook. Either there is no default mail client or the current mail client cannot fulfill the m
-
IDOC_ERROR_ILLEGAL_TYPE in business connector 4.7
Hi, IDOCS are being sent from sap system to Business connector and conversion to xml is done through bc services I am getting the following exceptions in business connector production server.I need to know the rootcauses of these exceptions and how t
-
I have read a number of reports of the problems people were having with acrobat 7 pro and vista so I thought I would report how I got it to work for me. My hardware is a new notebook running Vista Home Premium SP1 with all current updates. After inst
-
How do you display a price in 2 decimal spaces? e.g. $39.95000
Does anyone know how do you display a price in 2 decimal spaces? e.g. $39.95000 jsp code preferred please, thanks in advance!
-
Auxiliary channel allocation in TSPITR with RMAN-managed instance
Hi, I'm trying do perform TSPITR with RMAN-managed auxiliary instance. All backups are stored on tape. I need to send MML environment values while allocating auxiliary channel to connect to correct NetWorker server and send other NetWorker parameters