Dates were coming in with DV import... now they don't

Hi all,
I've begun capturing some old DV recordings; when I started yesterday, it captured the record dates and filed them by year in folders; for example, "Thursday, June 10, 1999" under the "1999" folder.
Suddenly, today, everything simply has today's date. Any thoughts as to what might have happened?
thanks,
Andrew

Yes the time code is correct in Final Cut but if I use command-Y in the event viewer or a timecode effect/title in iMovie it is wrong. Example: http://www.youtube.com/watch?v=YVXGlA_ZMuU note the time in the left hand corner.
Daniel C. Slagle
Keeper of the "Unofficial" iMovie FAQ
I may receive some form of compensation, financial or otherwise, from my recommendation or link

Similar Messages

  • TS1702 The images used to erase once they were copied to the computer, but now they don't. Any suggestions?

    Hello y'all,
         I don't mean to bother everyone with this issue, but usually immediately after plugging my iPhone into my computer it starts to sync and everything. Well now for some reason it doesn't erase the photos from the iPhone like it used to. How do I fix this???

    rabidrabbit wrote:
    Can I back up my iPhone 4S to my ipad 3 (64 gb)?
    no
    rabidrabbit wrote:
    However, now I don't have enough space in iCloud to backup either device. Why not?
    iCloud only give so much space for free storage, then if you exceed the limit of 5gb you have to pay for additional storage.

  • IPS engine upgrade with failover ASA, now they don't match?

    We recently added a failover 5520 with the ASA-SSM-20, which matches the primary ASA/IPS. My question is I just upgraded the primary IPS to 5.1(5)-E1. It went fine, except now the failover IPS is still on 5.0(2). How do I update the failover IPS to match what's on the primary?
    Shouldn't this happen automatically since it is setup in a failover scenario? I have it cabled via a cross-over cable to the primary ASA.

    The SSM modules are managed completely separately from the firewalls; you need to upgrade & manage both of them individually, as well as apply the same configurations to each either separately, or via a group in either CSM or VMS...
    If the second SSM module hasn't been given its own IP, you can "session" into it from the standby firewall console and then give it it's own IP..
    If this helped, please rate the post :-)
    Thanks!
    ...Nick

  • Is National Holidays supported for iCal?  It would be nice if you new what holidays were coming up with just a glance.  Like, what day is Fathers day on.

    Is National Holidays supported for iCal?  It would be nice if you new what holidays were coming up with just a glance.  Like, what day is Fathers day on.  You would think this would be basic for a calendar app.

    Hi,
    See this thread:
    https://discussions.apple.com/message/15096802#15096802
    Best wishes
    John M

  • I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help!

    I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
    Thank you,
    Chris

    Michael,
    Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
    As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
    Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
    Best regards,
    David

  • HT4009 My in app purchase keep being denied. Why? They were working for the past, uh, 2 years. Now they don't.

    My in app purchase keep being denied. Why? They were working for the past, uh, 2 years. Now they don't. I can't fix it on my own apparently because I'm sent to a rather unhelpful support site.

    If you mean that you are getting a message to contact iTunes Support then you can do so via this link and ask them why the message is appearing (we are fellow users here on these forums, we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
    If it's a different problem ... ?

  • HT1423 i am replacing ram in an early 2009 imac. easy - right? but the pulling on the tabs didn't work. i have had the ram sticks out before; but now they don't budge. should i apply more pressure? use a tool to pull harder? will the tabs break off?

    i am replacing ram in an early 2009 imac. easy - right? but the pulling on the tabs didn't work. i have had the ram sticks out before; but now they don't budge. should i apply more pressure? use a tool to pull harder? will the tabs break off?
    sorry for the format - my 1st question...

    thanks Kappy.
    the computer has beem working for years after my 1st ram removal; but i may have pushed them back too hard. i did pull firmly - tried pulling up slightly; tried tugging on the sides of the stick; pulling in pulses. the only thing i have not tried is using needle nose plyers with protection on the tab film itself.
    have you had the pulling harder ever work? or break the tab?

  • HT4489 I'm a novice so be nice. I have a list of contacts exported to a .abbu file which I'd like on my iCloud contacts but whenever i try to import them, they don't copy across only into "all contacts"

    I'm a novice so be nice. I have a list of contacts exported to a .abbu file which I'd like on my iCloud contacts but whenever i try to import them, they don't copy across only into "all contacts"
    Can anyone help, any would be appreciated.

    You have exported as an Address Book archive file: you need to select all the contacts and choose to export them as a vCard - this is the only format you can import into the iCloud website.

  • I continue to have problems with links in email, they don't  Work.

    I continue to have problems with links in email, they don't work. When I called apple support she said to hard boot by holding off and home keys and restart. However this is only since the new release of the operating system,  it happens ever day and it's getting OLD.. Any solutions?

    Yes, almost daily since the iOS update. Is there a permanent solution. And does the hard reboot hurt the iPad?

  • When I phone with my iphone 4 they don't hear me but I can hear them. What to do about that?

    When I phone with my iphone 4 they don't hear me but I can hear them. What to do about that?

    Try disconnecting the headphones and then adjusting the volume, does it say headphones?
    If it does, there might be something in the headphone jack, maybe lint, dirt, or something else in there.
    You can try getting it out by connecting the headphones 5-10x or spraying compressed air into the jack.
    If it doesn't say headphones or there isn't anything in there, try restarting or restoring the iPhone.

  • Speakers were working with Airport, now they don't work...can someone help?

    My external speakers were working nicely with Itunes and Airport for the last year and then last week, they do not work with Itunes. I think it has to do with the new itunes update. I have tried rebooting my computer and Airport Extreme with no luck. Can somebody please walk me thru the process to get my computer reconnected with my airport!?
    Thank you very much in advance!

    Can somebody please walk me thru the process to get my computer reconnected with my airport!?
    Sure, here are the basic steps to configure the AirPort Express for iTunes streaming:
    AirPort Express Base Station (AX) - iTunes Setup
    Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
    AirPort > Wireless
    o Wireless Mode: Join a wireless network
    o Network Name: <existing wireless network>
    o Wireless Security: <select the encryption type of the existing wireless network>
    o Wireless Password: <enter the existing wireless network password>
    o Verify Password: <re-enter the existing wireless network password>
    Music
    o Enable AirTunes (checked)
    o iTunes Speaker Name: <enter desired speaker name>
    o iTunes Speaker Password: (optional)
    o Verify Password: (optional)
    o Click Update to write the new settings to the AX
    In iTunes:
    iTunes > Preferences... > Advanced > General
    o Look for remote speakers connected with AirTunes (checked)
    The other thing to take into consideration, is that the iTunes host must be able to "communicate" to the AX in order to stream to it. Anything that would "block" the path could prevent audio from reaching the speakers. I would also check your computer's firewall settings to make sure iTunes is not being blocked.

  • TS1702 Some of my apps were updating when there was an interruption in internet connection.  Now they don't want to finish the update process.  Any ideas?

    Some of my apps were updating when there was an interruption in the Internet connection.  Now they won't complete the update process.  Any ideas?

    See:
    Downloading apps stuck on waiting...: Apple Support Communities

  • Baught & Registered Apple Care with Computer.  Now they say I am not.

    I Baught & Registered Apple Care with my Computer November Last Year. Now they say I am not registered and need the receipt. I am in Bolivia and do not have it with me, calling costs 3-5$ per minute! Any advice on resoliving this issue with them? Also, limiting phone use would be great, Thanks in Advance.

    How did you originally register Apple Care, by phone or online? You can double check Apple's Warranty Info website or check with the Bolivia User Group on how to proceed without paying for a phone call.
    Message was edited by: CMCSK

  • My iPhone doesn't match what I have in iTunes. My phone is what I want. How do I update iTunes? I did update and now they don't match. iTunes gives me the warnings that my phone is connected to another library. I don't have one. Any way to make iPhone ove

    My iPhone has all the data I want, but it isn't matching my computers iTunes suddenly? How do I get them to match?  I have more on phone than what is showing up in my iTunes. It is saying it is synced with another account which I don't have???? Help. I'm nervous I will lose, books,etc

    You can try following the steps in this article: https://discussions.apple.com/docs/DOC-3141.  Or, you could take a look at 3rd party program solutions such as this: http://www.librarytunes.com.

  • Someone put passcode on phone now they don't remember it cant open phone

    Someone put a passcode on phone now they can't remember what it is so I'm unable to use phone. How do I get use of my phone back?

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    Forgotten Restrictions Passcode Help
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    Also, see iTunes- Restoring iOS software.

Maybe you are looking for

  • Windows 7 Runtime Error Microsoft Visual C + +

    When i turn on my computer and let everything load, i get a message saying, Runtime Error. I didnt pay much attention to it until yesterday. I  tried channging the password on my desktop. When i clicked "change your windows password" absolutely nothi

  • Portege R100 - OS installation with 16 bit bootable PCMCIA CD-Rom

    Hi All Just wondering if any of you boffin's can advice on a very frustrating problem I am experiencing. I am trying to re-install the recovery CD on a Portege R100, so far, with no success. I have learnt that I need(ed) a 16-bit bootable pcm cdrom t

  • I forgot my ipod's code when logging on it

    I lost my Ipod in about 6 months ago, and i found it back now. Then i forgot my code to get in. <Email Edited by Host>

  • No sound on DV2000

    Hello, I own a HP Pavilion dv2000. I turned on my computer this weekend and all of a sudden I can't get any sound when I try to open iTunes.  It give me an error message of "iTunes has found a problem with the audio configuration"  I have tried every

  • CS2 will not install

    I had problems with my Dual 1.8 GHz PowerPC G5 running 10.3.9, so I had to reinstall the system software.  I tried to reinstall CS2 and after unistalling and deleting every adobe program on the computer, the install fails.  I am able to go through th