Daughter's Ipod touch 5 connected my pc has downloaded Iphone data

My daughter's new Ipod touch 5 has just been connected to my home PC and has downloaded my work iphone data, which is backed up on this PC. How do i reset her ipod so she can start again and then share only music with her?
Many thanks  
D

Go to Settings>General>Reset>Erase all content and settings and set the iPod up as her own.
If you use the same computer:
How to use multiple iPods, iPads, or iPhones with one computer

Similar Messages

  • I changed my Apple ID Username, but now my daughter's iPod Touch cannot connect and won't take the new sign-in protocols???

    I changed my Apple ID Username on my iMac, but now my daughter's iPod Touch cannot sign-in to iTunes, Apps, etc.. The old username sign-in doesn't work either. Apple Store Rep advised using iCloud to back-up her iPod, but have no experience with iCloud - have nevr used it on my iMac. Any info would be helpful.

    I would suggest visiting this URL http://www.apple.com/icloud/setup/.

  • Ipod touch doesnt connect to the internet but iphone has no trouble at the same time

    I have a 3rd gen ipod touch and all of a sudden the internet stopped working on it. Its still connected to the wi-fi and all other computers and my iphone are all working ok. Have tried resetting everything, powering off the touch, reset network settings etc but no joy.. Any ideas?

    You have dine some great troubleshooting so far and you are on the right track I would look at a restore now but not from the backup. I would try as a new device... This is to see if it is a software or hardware issue...
    http://support.apple.com/kb/Ht4137
    I hope this helps!

  • Hi, please help my other daughter her ipod touch is disabled connect to itunes after say its itunes couldnt connect to the ipod touch coz its is locked with a passcode?? please help how...

    hi, my daughter hers ipod touch is disabled connect to itunes after say its itunes couldnot connect to the "ipod touch" because its is locked with a passcode please help how to fix connect...i did turn off her ipod touch put usb back on there same in doenot say still ipod is disabled i dont understand please help how???

    If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
      1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
      2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
      3. iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup. If you do not have a
              backup to restore, then restore as New.
    If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New.

  • I have I phone, daughter has iPod touch cannot connect via FaceTime

    I have I phone, daughter has iPod touch cannot connect via FaceTime

    i've been told facetime will only work over a wifi connection. have you tried this?

  • HT1212 my daughter's ipod touch has been disabled because she forgot the password. It also says it cannot connect to itunes because it's been disabled. How do i just erase the ipod totally so we can use it again?

    My daughter's ipod touch has been disabled because she forgot her password. It also will not connect to itunes because it's been disabled. How can I just erase or reset the ipod so she can use it? We don't mind if the info. on the ipod is lost.

    Hi Guys,
    I havent touched my Iphone 4s in ages (about a month). I came back to it the other day. I forgot the password, so naturally it disabled it and is telling me to connect to iTunes. In the meantime, i had got a new computer and didnt back up the itunes files (because im an idiot). So now when i connect it to iTunes it tells me to verify it on the phone, but i cant get in there because it is disabled. PLEASE SOMEONE HELP!!! I HAVE NO IDEA ON HOW TO FIX IT!! I've tried to restore it, I've tried to jailbreak it. NOTHING works!! PLEASE HELP!!!

  • I just bought my 10 year old autistic daughter an IPOD touch that she needs to take to school with just limited music on it but she also also has an IPAD mini for home that is fulllyloaded with apps .  How do I set up Itunes to make this work

    I just bought my 10 year old autistic daughter an IPOD touch that she needs to take to school with just the music (no apps) on it but she also also has an IPAD mini for home that is fullly loaded with apps.  The last time I tried to connect 2 devices to Itunes I ended up loosing my own music library so I am a bit hesitant to start setting up this new IPOD touch with outsome help. Anyone have any ideas on how I set up Itunes to make this work and not loose her IPAD apps and media?

    Open itunes, connect ipad, select what you want, sync.
    Connect ipod, select what you want, sync

  • HT1212 My daughter's ipod touch is disabled for the next 43 years. Any hints on what she may have done to cuase this and how to fix it?

    My daughter's ipod touch is disabled for the next 43 years. Any hints on how to fix this? I have followed the steps listed on the apple website to p lace it into recovery mode, but the ipod is now "stuck" on the connect to itunes part. Thanks!

    Sounds like a case of entering an incorrect passcode over and over.  Only fix is to follow the instructions in that article you reference, HT1212, and it may take a couple tries to get it to work right.

  • Just sent in daughter's Ipod touch 5th generation to be fixed....They sent me a new one....is there anyway to get the contents of her old one onto the new one?  I synced the old one with Itunes before I sent it in and backed it up on my computer.

    Just sent in my daughter's Ipod touch 5th generation to be fixed.....They sent me a new one.  Is there any way to get the contents of her old one onto the new one?  I synced the old one with Itunes before I sent it in and backed it up on my computer.

    Sure, as soon as you open iTunes with the new iPod connected, it will have a "Welcome to your New iPod" screen. Just choose Restore from backup.

  • My daughter has not used her ipod touch for 16 months and has forgotten her passcode.  restore factory settings keeps failing due to a software update failure!

    my daughter has not used her ipod touch for 16 months and has forgotten her passcode.  restore factory settings keeps failing due to a software update failure!
    how can i get this ipod reset.  She now has an iphone so this is going to be used by someone else in the family and should be simple to do but itunes just keeps booting it out even though it recognises that it was previously connected to our itunes account as all of the children were on my account

    That has nothing to do with an update server. Do the following:
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
      If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes

  • My daughter's ipod touch wont sync with our computer.

    My wife recently got an ipad and iphone. Since she connected these with our computer, my daughter's ipod touch won't sync. It there some reason why all the devices can't be on the same itunes account?

    gordo, is your daughters device detected by iTunes ( shows up in pane on left)?
    You might also check out this kb  http://support.apple.com/kb/HT1495

  • HT1459 can I disconnect wifi access on my daughter's ipod touch?

    Is ther a way to disconnect wifi from my daughter's ipod touch. I don't want her to have access without my monitoring

    Password protect your WiFi connection (really should be anyway). She will need to know the password to log in.

  • IPod touch problems connecting

    My daughter's iPod touch is having problems connecting to our home wifi. I have updated the software (as much as it will allow), reset the network settings, tried turning off then on the router. The network is recognized, I can put in the pass code, the signal strength is full, but the timer keeps spinning (cannot get the check mark).  Does anyone have any more suggestions?  All other devices in the house are working fine.

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • HT1212 My daughter's iPod touch is stuck on a blank screen with the loading circle just going around and around. I tried to restore it, but it says I have to enter the passcode. I have the passcode, but as I said, there's nothing on the screen. How do I f

    My daughter's iPod Touch is stuck on a blank screen with that loading circle thing just going around and around. She said she was trying to duplicate an app or something, and all the the apps started shaking like when you delete them. I turned the iPod off, but it never turned back on completely. I tried to restore it, but it's saying that I have to enter the passcode. But, as I said, there's nothing on the sceen excect the circle thing. Please help!!!!!

    Start at # 3
    1-  iOS: Not responding or does not turn on
    2  Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    3 If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    4  Try on another computer                            
    5  If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • My ipod touch is connected to the wifi but when I get on safari it says "cannot open page because not connected to internet." SOMEONE PLEASE HELP!!!!

    My ipod touch is connected to the wifi but when I get on safari it says "cannot open page because not connected to internet." SOMEONE PLEASE HELP!!!!

    - Reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Power off and then back on your router.
    - Reset network settings on the iPod: Settings>General>Reset>Reset Network settings
    - The troubleshjooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

Maybe you are looking for

  • Osmf multiple video

    Hello , I am trying to load two video in the same movie clip I have 4 screens some of the screen has 1 video some as two It is working good , when I switch from 1 screen to another the video get erase But when I open the Activity monitor I can see th

  • OP1a IMX 30 PAL with pillarboxing

    Does anyone know why, when I have HD footage (1920x1080 square pixels) and I export as MXF OP1a IMX 30 PAL (720x576) with aspect set to D1/DV PAL Widescreen 16:9 (1.4587), the exported file has 704x576 active picture with 8 pixels of black pillarboxi

  • Configurate cisco ipsec vpn client at asa 5505 version 8.4

    Hi dear. I want to configurate cisco ipsec vpn client at asa 5505. At my asa the software version is 8.4. please provide me a link or some material to config ipsec vpn client at asa 5505 version 8.4 thank you.

  • Can not check S.M.A.R.T. status of my SSD drives

    I have two SSD drives (a Samsung and a OWC Mercury Extreme) in my Macbook Pro 8,1 and suddenly I am no longer able to check the SMART status of either drive. I've tried SMART Utility, Disk Utility, TechTool Pro 8; even the System Profiler shows the d

  • Are these functions and parameters used in DirectX 11.2?

    Functions and parameters like WINAPI, hPrevInstance, hInstance , PSTR etc are used in DirectX 11.2?