Day Date and Time ?
On my Commando when you hit the button to have the screen come on after it's been sitting you get the Time, Day and Date.
When you swing the arm to unlock and are in the home screen you get the time only.
Is there a way to get all three on the home screen?
This is the Casio Commando Android phone?
FWIW: you can, after unlock, just press the time in the notification bar, and the date should be displayed on the other side. Of course the day will not be displayed.
You can also put an icon for your calendar app on the homepage. That will show you what you want.
Similar Messages
-
Day, date and time in menu bar
Hello:
New MacBook and new to Apple computers. I can get day of week and time of day to display, but would also like to have the date displayed. I've followed the directions, but date won't display. When I right click on the day/time, the entire display (Monday, February 11, 2008, for example) is displayed, but grayed-out. Does that mean that my MacBook, with Leopard, can't display day/date/time? Niggling issue, but if anyone has a solution, please respond.
Thanks,
medrenmedren wrote:
Thanks for your suggestions, all of you; I hope I can get to the point where someday I can answer a newbie's question.
Your welcome. Thanks for the it is appreciated.
You'll get there. We all started with no points and it was only up from there. I am still learning new stuff here. There are a lot of very knowledgeable people here that are a great help. Welcome aboard. -
How to enter a new Date and Time each day in a Numbers Spreadsheet...
Hi... I have finally decided to move away from Excel and really give Numbers a shot... I have an application where each day I first enter the current date and time into a particular cell of a new row and then I enter some data in cells adjacent (in the same row) as that entered date-time. Then the next day I want to again enter the (new) current date and time and add more data next to that new date-time and so forth day after day... You can't use something as simple as =NOW() because then everyday, ALL of the date-times would change to the current time... Nope, now what I want... I just want to be able to EASILY and QUICKLY enter the current date-time value in one call and then have that specific value stay there forever... In Excel, this is accomplished with the keyboard shortcuts of
<cntl> followed by a semicolon (;) for the date
then enter a single space (for separation of date versus time) followed last by
<command> followed again by a semicolon...
So all together that is,
<cntl><;><sp><command><;>
and that puts something like
4/10/2010 9:49:00 AM
in a single cell...
That's what I now want to be able to do in Numbers...
How do I do that??? Do I use the menubar item "Insert Date and Time" and if so, how exactly do I get the current time to show up in the chosen cell??? With formatting??? Is there a keyboard shortcut method like the one I mentioned that works for Excel?? I've perused the manual and though I found lots on date-time, I didn't see how to do specifically what I want to do... I likely just missed it as surely it must be easy to do...
Any feedback would be much appreciated... thanks... bob...Badunit wrote:
The result of running that script is "UI Enabled = TRUE".
I have cells named by the header values.
This may be the problem.
The script is an old one which deciphered only the letter+digit cell references.
Here is a new version which works with every kind of cell reference.
--[SCRIPT insertDateTime]
Enregistrer le script en tant que Script : insertDateTime.scpt
déplacer l'application créée dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Placez le curseur dans la cellule qui doit recevoir la date_heure
menu Scripts > Numbers > insertDateTime
La cellule pointée reçoit la date_heure.
L'aide du Finder explique:
L'Utilitaire AppleScript permet d'activer le Menu des scripts :
Ouvrez l'Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case "Afficher le menu des scripts dans la barre de menus".
+++++++
Save the script as a Script : insertDateTime.scpt
Move the newly created application into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Put the cursor in the cell which must receive the date_time.
menu Scripts > Numbers > insertDateTime
The pointed cell receives the current date_time.
The Finder's Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the "Show Script Menu in menu bar" checkbox.
Yvan KOENIG (VALLAURIS, France)
2009/03/01
2010/04/11 is now able to treat every kind of cell references
property theApp : "Numbers"
--=====
on run
set {dName, sName, tName, rname, rowNum1, colNum1, rowNum2, colNum2} to my getSelParams()
my doYourDuty(colNum1, rowNum1, tName, sName, dName)
end run
--=====
on doYourDuty(c, r, t, s, d) (*
c = columnIndex
r = rowIndex
t = table's name
s = sheet's name
d = document's name *)
local cdt
set cdt to my cleanThisDate(current date) (* the new date_time as a clean date_time *)
tell application "Numbers" to tell document d to tell sheet s to tell table t
set value of cell r of column c to cdt as text
end tell -- application …
end doYourDuty
--=====
on cleanThisDate(dt)
(* ugly code but once I got date_time with milliseconds so if necessary, I drop them *)
local l
set l to my decoupe(dt as text, ":")
if (count of l) > 3 then set dt to date (my recolle(items 1 thru 3 of l, ":"))
return dt
end cleanThisDate
--=====
on getSelParams()
local r_Name, t_Name, s_Name, d_Name, col_Num1, row_Num1, col_Num2, row_Num2
set {d_Name, s_Name, t_Name, r_Name} to my getSelection()
if r_Name is missing value then
if my parleAnglais() then
error "No selected cells"
else
error "Il n'y a pas de cellule sélectionnée !"
end if
end if
set two_Names to my decoupe(r_Name, ":")
set {row_Num1, col_Num1} to my decipher(item 1 of two_Names, d_Name, s_Name, t_Name)
if item 2 of two_Names = item 1 of two_Names then
set {row_Num2, col_Num2} to {row_Num1, col_Num1}
else
set {row_Num2, col_Num2} to my decipher(item 2 of two_Names, d_Name, s_Name, t_Name)
end if
return {d_Name, s_Name, t_Name, r_Name, row_Num1, col_Num1, row_Num2, col_Num2}
end getSelParams
--=====
set {rowNumber, columnNumber} to my decipher(cellRef,docName,sheetName,tableName)
apply to named row or named column !
on decipher(n, d, s, t)
tell application "Numbers" to tell document d to tell sheet s to tell table t to return {address of row of cell n, address of column of cell n}
end decipher
--=====
set { d_Name, s_Name, t_Name, r_Name} to my getSelection()
on getSelection()
local _, theRange, theTable, theSheet, theDoc, errMsg, errNum
tell application "Numbers" to tell document 1
repeat with i from 1 to the count of sheets
tell sheet i
set x to the count of tables
if x > 0 then
repeat with y from 1 to x
try
(selection range of table y) as text
on error errMsg number errNum
set {_, theRange, _, theTable, _, theSheet, _, theDoc} to my decoupe(errMsg, quote)
return {theDoc, theSheet, theTable, theRange}
end try
end repeat -- y
end if -- x>0
end tell -- sheet
end repeat -- i
end tell -- document
return {missing value, missing value, missing value, missing value}
end getSelection
--=====
on decoupe(t, d)
local l
set AppleScript's text item delimiters to d
set l to text items of t
set AppleScript's text item delimiters to ""
return l
end decoupe
--=====
on parleAnglais()
local z
try
tell application theApp to set z to localized string "Cancel"
on error
set z to "Cancel"
end try
return (z is not "Annuler")
end parleAnglais
--=====
--[/SCRIPT]
It's available on my idisk :
<http://public.me.com/koenigyvan>
Download :
For_iWork:iWork '09:for_Numbers09:insertDateTime.zip
Yvan KOENIG (VALLAURIS, France) dimanche 11 avril 2010 14:16:41 -
I would like to download an application for my desktop and maybe even my iphone that will tell me how many days, hours, minutes, etc have elapsed since a particular date.
For example, my brother just had a baby and I want to put that date and time into the app and then determine how long it has been since that date and time.
Hopefully this makes sense, because I have not been able to locate anything.
Thanks in advance,This is fantastic. Thank you.
Is there any way to have something like this displayed on my desktop showing the time as it ticks away? -
My date and time preferences all show up as correct and I get "Sun 10:54 AM" in the menu bar (correct), but when I click that to quickly get the day's date, I get "Sunday, August 5, 2011". The '5' is the only thing that is wrong, and it has remained '5' for the last 3 days, even thought the Date & Time Preferences are correct. Is there any easy fix for this? I don't know if August will change to September, but the day of the week has kept up with time!
I know how to get the full date and time, etc. to show up on the menu bar (and it shows up correctly), so it's just a little 'glitchy' thing that when you click on the date/time in the menu bar, the greyed date remains on the '5th' of August - sort of like that Groundhog Day movie!
-
i bought my i pod touch from us but i live in india .i have been using this from many days fr just a few days before something went wrong with it and the date and time has changed what do i do?
Have you went to Settings>General Time&Date and correct the time. Make sure the time zone is correct too. Also go to Settings>General>Inernational and make sure the Gergorian calender is selected.
-
Email syncs now say "Updated Mar 30", the day I upgraded to Lollipop 5.0. Two days later it is still saying Mar 30. The notification should read the date and time you updated email receiving. Does anyone else have this problem? Is there a solution to this?
We want to make sure your phone is in working order Mb_in_NC. I know it can be difficult when you see different times. What is your make/model of your device? When did it start? Do you have a different time on any other applications?
AmberF_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!! -
As of four days ago, the date and time of my text messages does not appear. I don' t know what hapened. I have reset the network settings, but it didn't fix the problem.
Hello andyb4u8,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
http://www.apple.com/support/iphone/assistant/calls/
Best of luck,
Mario -
Cisco SPA525g2 Date and time Not Synced with the PBX server
Hello,
We have a couple of SPA525g2 phone connected and registered to our PBX server. We were able to configure 3 extensions on different lines of the phone. However, at times we were encountering issues with the other lines configured on the phone. There are times wherein 1 extension configured on the phone is having one way audio issue, but the other extensions configured on the same phone is working fine. and we have to reboot/reset the phone several times for all the extesions configured on the phone to work.
Also, whenever we reset the phone, the date and time will be way way behind the current date and time, eventhough we have already set the correct date and time before we reset the phone.
How can we resolve the one way audio issue on 1 or 2 extensions of the phone, while the other extensions configured to it is working fine?
How can we make the phone sync the date and time with the PBx server?
Any input and help regarding this issue is greatly appreciated...
Btw, date and time issue not sync with the PBX server is just happening on SPA525g2, we have other phones like SPA303, SPA504, and SPA232D/SPA302D. All other phones' date and time is in sync with the server even though we reset them except SPA525g2.
Thank you very much,PeterMacSF,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/ -
Getting Date and Time to Show in the Menu Bar
I have the OS setup to set the date and time automatically and the clock set to "show date and time in the Menu Bar. I have the international set up for the Day of Week, Month, Date and Year, but the menu bar only shows "Fri X:XX:XX PM" is there any way to get it to show me Fri May XX, 2008 X:XX:XX PM"?
Thanks for any help.
JohnI use iClock too. It is much more customizable than the Time & Date clock provided with the system. I have used it for several years and it has been very stable for a third-party application.
Although I have only used it for a couple of months, I also really like another third-party application you may like, to put weather conditions on the menubar called WeatherDock (freeware). It accesses Weather.com to provide the current temperature (of course) but it can include several other weather conditions (depending on how much space you have on your menubar). In addition to temperature, I have it show the weather condition (currently partly cloudy, typical in Houston), wind direction and speed (I ride a bike to the office and this tells me if I’ll be fighting it or aided), and humidity (also a Houston favorite). It will also speak the weather conditions when they change. -
After reading the following article, I have decided to use SSAS dimension wizard for generating our Date dimension, which creates a DATETIME PK.
http://www.made2mentor.com/2011/05/date-vs-integer-datatypes-as-primary-key-for-date-dimensions/
I have also created a separate Time dimension as granularity of an hour is required.
The Time dimension is very simple and only contains a surrogate key (INTEGER) and actual time in hours (VARCHAR).
DimTime(TimeKey, TimeInHours)
Our Fact table will now have a link to both the Date and Time dimension using the PK's.
Our analysis is required by hour, day, week, month and year.
My query is; Will this current structure cause any problems when creating MDX scripts to analyse our data (i.e. drilldown and rollup queries) Hour - Day - Week - Month - YearHi Darren,
According to your description, there a day and hour granularity in your fact table, so you want to a hierarchy like Hour - Day - Week - Month - Year, right?
In your scenario, you created a time table that only contains a surrogate key (INTEGER) and actual time in hours (VARCHAR). We cannot create a Hour - Day - Week - Month - Year hierarchy without ant relationship between date table and time table. As per my understanding,
you need create a foreigner key in time table, and join those table in the data source view, then you can create such a hierarchy. Here are some links about create time dimension, please see:
http://www.ssas-info.com/analysis-services-articles/59-time-dimension/1224-date-and-time-dimensions-template
http://www.codeproject.com/Articles/25852/Creating-Time-Dimension-in-Microsoft-Analysis-Serv
Regards,
Charlie Liao
TechNet Community Support -
Incrementing a string number for date and time
There are probably a lot of ways to do this, but I only want to use a bunch of if - else loops if I really need to.
I have a date and time for input, let's say 2006-04-19 22:00. In Java, if I convert that to 3 integers (year, month, day), it will output 2006-4-19. I need to be able to increment in a loop for every day and month from one date to the next. If I keep it as a string, I won't be able to increment the value though, (at least I'm not sure how). I'm thinking that even if I converted it to an integer and back to a string, that the leading zero would be removed.
I found a post here that said something about formatting the number with 2 numbers, by using:
DecimalFormat format = new DecimalFormat("00");
format.format(1, sb, new FieldPosition(0));
Or is there a way to use the gregorianCalendar stuff that would output the date with all of the zeros in place, while incrementing and looping correctly?
Thanks.I would get a Date object--you can use java.text.SimpleDateFormat if you're starting with a String--and use that to create a GregorianCalendar. Then you can just call Calendar's add method to add one to whichever field you want. Use the SimpleDateFormat to turn the date back into a String for display again.
Calculating Java dates: Take the time to learn how to create and use dates
Working in Java time: Learn the basics of calculating elapsed time in Java
Formatting a Date Using a Custom Format
Parsing a Date Using a Custom Format -
In the past I’ve had no problem moving photos from my iPhone 4 into various folders on my computer while retaining their original date and time. I would import into iPhoto, then drag the photos from iPhoto into other folders via the Finder or Adobe Bridge (which is my principal image organizer). The original date and time of the photo would always travel with the jpeg into iPhoto and then into other folders. However, sometime during a recent session transferring photos in this way, the dates of the photos started to change at the point when I copied them out of iPhoto. Within iPhoto itself, the various original dates of the photos are retained. But in Finder and Bridge, copies of those same photos all carry the same (worthless) date: the date and time that they were imported from my iPhone. I can’t figure out what would have changed on my Mac to make it start re-dating my photos. I was happily dragging and dropping photos, and suddently I started to lose the original dates. Did I inadvertently change some settings? (I am running OS 10.6.8 and using iPhoto 8.)
(I use iPhoto only to import from my iPhone; I organize all my images, including thousands of RAW files, in folders on a big external drive.)
Why are you using iPhoto at all? use image capture or drag and drop the photos
The problem is that the files I am copying are getting stripped of the EXIF metadata
eliminating iPhoto from your work flow will eliminate one oppertunity to have this happen For photos in iPhoto it is best to export them rather than drag an drop them - this assures your EXIF and IPTC data is correct and uptodate
Why would I be able, over many years, to retain EXIF metadata in photos imported from an iPhone--then one day find that the same workflow strips such photos of EXIF data?
Because exporting is the supported way to "export" photos - I never drag and drop photos out of iPhoto and I never use thrid party programs on the photos in the iPhoto library - try exporting as suggested above and see if that is the solution
LN -
I purchased my MacBook Pro 13" from the Apple Store in Tucson, AZ, in mid-January. Since then, every time the Mag-Safe cord is jostled, not even disconnected, sparks fly from the power terminal on the computer, the computer shuts down, and dumps its passwords, as well as the date and time.
Any work in progress is also lost.
I work overseas, and Apple's advice was to give them my credit card number, await shipment of a new power supply and cord, and then, when I return the old power supply and cord, i'd receive a credit. That won't work, as packages from the US to my location take weeks if they arrive at all. There is no Apple Store within a reasonable distance. Or, Apple suggests, when I'm home on leave in mid-June, I should bring the computer to the Apple Store for repair--I have only days in which to do that, but I suppose I'll need to try. My concern is that I'll need to return overseas without my computer and won't be able to retrieve it for months, until my next leave.
This issue shows up elsewhere online. Is there a short in the power terminal in the computer, or on the Mag-Safe power cord, or within the computer itself? It's a known issue, thus I wonder why it hasn't been fixed.Odd, but here's a copy of Page 1 of the links I got:
Apple Portables: Troubleshooting MagSafe adapters26 May 2011 ... If the spark comes from somewhere other than the blades of the plug, .... Apple Portables: Reducing cable strain on your MagSafe power ...
support.apple.com › Support - Cached
Apple - Support - Discussions - Magsafe sparked when plugging into ...
2 posts - 2 authors - Last post: 22 FebI plugged my magsafe adapter into my macbook pro (mid 2010 model i think ...
discussions.apple.com › ... › Power and Batteries on a MacBook Pro - Cached
Mag Safe power cord sparks when...: Apple Support Communities6 Jun 2011 ... Mag Safe power cord sparks when connected or disconnected ...
https://discussions.apple.com/message/15350172
Show more results from apple.com
Apple power brick sparks lawsuit • The Register
- 4:52am6 May 2009 ... Apple power brick sparks lawsuit ... Apple, for its part, made the MagSafe one of the featured, um, features of the MacBook Pro when it ...
www.theregister.co.uk/2009/05/06/apple_magsafe_lawsuit/ - Cached - Similar
My MagSafe sparks everytime - Philippine Mac Users Group
10 posts - 6 authors - Last post: 31 Mar 2008Guys, I seem to have a problem, well you see my MagSafe sparks everytime I plug it into a power source. I'm experiencing this problem at ...
www.philmug.ph › ... › Mobile Macs › Archives - Cached - Similar
@apple MagSafe failure sparking all over the place, not recalled ...1 Jan 2011 ... ryanol: @apple MagSafe failure sparking all over the place, not recalled? Not repairable 79 bucks later #applefail another design fail for ...
constantlycomplaining.com/.../@apple-magsafe-failure-sparking-all-over-place,-not-recalled%3F-not-repairable-79-bucks-later- - Cached
Great Northern Insurance Company sues Apple over fire-causing MagSafe2 Dec 2010 ... Over the past few years, Apple has been on the receiving end of more ... indicating that Apple's MagSafe adapters were prone to sparking and ...
www.edibleapple.com/great-northern-insurance-company-sues-apple-over-fire-causing-magsafe-adapter/ - Cached
Amazon.com: Apple MagSafe 60W Power Adapter for MacBook MA538LL/A ...Genuine Apple 60W MagSafe Power Adapter for MacBook A1184 · 3.9 out of 5 stars (11) .... like it was burning.. the covering on the cord melted off.. sparked ...
www.amazon.com › ... › Laptop Battery Chargers - Cached - Similar
Insurance company claims Apple's 'dangerous' MagSafe started fire ...
40 posts - 29 authors - Last post: 30 Nov 2010A newly filed lawsuit claims that Apple's MagSafe charger, ... Apple to heating, burning and sparking problems with its MagSafe adapters," ...
forums.appleinsider.com › Future Apple Hardware - Cached
Spark it up!!! "Apple announces Magsafe out of warranty ...
3 posts - 3 authors - Last post: 19 Aug 2008Info.: "This one concerns faulty Magsafe power adaptors that shipped with MacBook (13-inch Late 2006), MacBook (13-inch), ...
forums.macresource.com/read.php?1,546534,546743 - Cached -
How do you know the date and time synchronization in the windows version?
Where can I see the date and time synchronization?
There's a toolbar button sitting in the Customize Palette. Move that button to a toolbar or into the Open Menu box; when you hover the cursor over that button a tooltip will appear with the day-of-week and the time of the last Sync event.
Maybe you are looking for
-
Hi, I've successfully installed and create database on RHEL Version 5. I'm using Oracle 11g db server. all services, listener and database is up the only problem is when I access OEM using Firefox https://192.168.1.1:1158/em it gives me security cert
-
Calendar App. Crash. March 2013
Why my Apple calendar App. Crashs if i try to watch on my appointments of March 2013 on my iPad Mini?
-
How do I update to Safari 6. I have Safari 4.0.3
How do I update my OS to Safari 6. Currently I have 4.0.3.
-
.mov problem with Premiere CC v8.1 Mac OS 10.85
HI, I got a serious problem. I bought a Creative Cloud Subscription and I try to open a project and the files connect alright but I can only play audio, no video it shows red. The clips are .mov and were converted from a MXF to mov using XfcpX 2 The
-
Regarding FMS query to get the account name and get it in the report
Dear all, I have created a FMS query to pick the G/L account name in the payment voucher,But the name which i got through the FMS in an UDF is not coming properly.It comes only if am manually entering Shift+F2 in that field. Pls give me a suggestion