Day of the week and the day of the month out of sync
I'm not sure this is the right forum to post this, so I apologize in advance.
When I open iCal on my iPhone 4 in day view I see Oct 29 with a W for Wednesday on top of it although below the days of the month it reads: Tuesday, October 29, 2013.
Is anyone experiencing this problem? Any solution?
TIA
Thanks for replying, ChrisJ4203. It's defintely a problem with Brazilian users. Here's a workaround a countryman posted:
I've managed to fix it:
Go to Settings / Mail Contacts and Calendars / Start the week on
Change from Sunday to Monday.
It appears people in Brazil are the only ones affected.
It's a good work-around while apple does not fix this bug.
Mesmo problema aqui. Como consertar:
Ajustes / Mail contatos e calendários / Iniciar a semana em:
Mude de "Domingo" para "Segunda"
Parece que somente pessoas no Brasil foram afetadas.
É uma boa forma de contornar enquanto a Apple não repara a bug.
iPhone 5 - iOS 7.0.3
Similar Messages
-
When I change the "split-days" interval time, under Options > Settings, to
15, or every 15 minutes, the week and comparison views don't show the correct
time range for the day.
<P>
For example, if I click View to display the calendar and then click Week to get
a weekly view, the time range displayed is from 6:00 a.m.
to 4:00 p.m. If I click Comparison to get a
comparison view, the time range displayed is from 12 p.m.
to 6:45 p.m.
<P>
In this example, should both of these views show the same time range, from
9:00 a.m. to 4:00 p.m.?
No, the two views will not necessarily show the same time range. The time
range for the comparison view will start at the beginning prefs time only
if you have something scheduled (on any day of the week) starting at that
time. For example, on one of the days during your week of comparison, if you
create an event that starts at 9:00 a.m. and then open the comparison view, the
time range displayed will start with 9:00 a.m.
<P>
Additionally, view times will expand past the configured settings if events
span past the time range. That is, if you have an event that spans from
5:00 p.m. to 8:00 p.m., the event will be reflected in the view, even though
your time range may be set to go only to 6:00 p.m.Umm yes.
The settings are stored in ''prefs.js'', so you could swap various copies of this file in and out.
However, the system will load ''prefs.js'', then, if present, ''user.js'' , so you can set up just your changes in ''user.js'' .
The sort of line you need to look for is like this:
<code>user_pref("mail.server.server14.check_time", 10);</code>
You'll need to do some research to identify which of your accounts is which.
Search for the account's email address:
<code>user_pref("mail.identity.id10.useremail", "xenos@example.com");</code>
Use the id number to locate the account number:
<code>user_pref("mail.account.account29.identities", "id10");</code>
Use the account number to find the server number:
<code>user_pref("mail.account.account29.server", "server14");</code>
Finally, you can then use the server number find the account's time setting:
<code>user_pref("mail.server.server14.check_time", 10);</code>
This last entry may not exist, if you have never changed the setting from the default 10 minutes.
Do be careful with your typing and copy/pasting; if the file fails the syntax parser it will silently fail.
And make sure Thunderbird is shut down when you do the swap. If it's open, it may overwrite changes, and in any case, it only reads the settings file when it starts up. -
My iPod 5th gen touch went through the washing machine. It still works but it has water in the screen and I can't get it out. I put it in uncooked rice for a day but it didn't work. And suggestions??
Leave it in the rice for at least a day and change the rice every other day or so. The rice and iPod should be in a sealed container.
Apple will exchange your iPod for a refurbished one for $149. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit -
i have iphone 3gs and last days i made upgrade 5.01, but i dont know that this version is not avaliable in brasil yet. than my iphone 3gs 32 gb no more find the wide and it be seaching the sinal. what i need to do to back to before situation. thanks a lot
iOS 5.0.1 has been out for a couple months, if not longer.
There was no delay in releasing it in any country.
So what is your issue? -
Need the first day of the year and last day of the year.
hi all,
i need a function module which can get me the first day of current year and last day of the current year??
please help.Similar date questions are being asked ALL THE TIME. Please search.
-
good day. as I can do to update my iphone 4 to the latest version of ios 5. whenever you connect to the pc and try to update the waiting time is very long, sometimes up to 12 hours and despite the wait always produce an error message for a long time waiting
Disable ALL security software (firewall, antivirus/spyware, etc.) running on your PC while updating.
-
Can you set a passcode to activate at certain times of the day, say at 930pm, and turn off again the next morning?
No, sorry, you can't. The screen lock passcode is either on at all times or it's off.
Regards. -
I backed up my iphone5 in the morning and later again on the same day, in the afternoon. I then restored an older backup from the morning. Now all my music files refuse to play even though they still appear on iphone. How can I resolve this?
Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.) -
i-phone shuts off, I have to hold the home and power button at the same time to get the icon to show up. Then have to hold the home button. I'm restoring my phone multiple times a day just to get it to work. help!
Are you restoring as new?
-
i recently buy an apple iphone 4s.the problem is that when i started music player on my iphone the speaker is not outputting the sound.and when i lock the phone at the same time the sound starts.thos problem is from last 3 days.and i am really confused???
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue continues, take the device to Apple for evaluation and possible replacement. -
How to get the lock and block occured for the full day
Hi,
How to monitor the lock and blocks occurred for the full day? i need to get it by end of the day. is there any script for this?Hi,
How to monitor the lock and blocks occurred for the full day? i need to get it by end of the day. is there any script for this?
Why would you like to collect information about locks and let me tell you, you cannot collect information about ALL locks which were taken and even thinking about it is pointless.
Coming to blocking if you have heavy system with huge concurrency there is bound to be blocking which is necessary and good for RDBMS but if the blocking remains for long time then this is a issue.
There is DMV sys.dm_tran_locks which tell you what all locks are being taken. You can see various examples mentioned in DMV online documentation and can schedule the query to run every 5
mins and insert its record in table which you can refer at end of the day.
This task would be made very easy if you have Monitoring tool which gives you information in your mail every time blocking occurs I have Spotlight in my environment.
If you are looking for doc for troubleshooting blocking below is one you can refer
http://support.microsoft.com/kb/224453
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
I downloaded two movies 4 days ago before a school trip. I watched the first on the bus on the way. I am now on the way home and want to watch the other movie and it disappeared. This has happened to me in the past and I dont understand the problem!!
Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer. -
my ipad is on an infinite loop. I used ios7 for a few days and then did updates on some of my apps. that's when the infinite loop started. I have tried pressing the power and home button at the same time, but it doesn't work. Please help!
I even tried some hints posted for ios6 (turn off Ipad, holding home button and plugging in power cord at the same time and then releasing the home button)
I did manage to get a different screen that shows the itunes icon and a power cord, but nothing happens.You were on the right track. You got the connect to iTunes screen and you ended to use iTujes to restore your iPad. Try recovery mode again.
Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
i had my iphone 5c in my lifeproof case in the water and when i took my phone out there was a few drops on it but i didnt worry about it, but now it wont charge at all except to 4% and then it stops and ive had it in rice for 8 days........WHAT DO I DO
It sounds like the LifeProof case may have leaked. Did you pay for the Waterproof protection? If so, you can file a claim with lifeproof, pay the deductable, and get a replacement.
If you didn't purchase the Waterproof guarantee, if you have Applecare Plus, $79.00 will get you a replacement. If you don't have AppleCare Plus, then this is a $269.00 replacement lesson. -
Getting the start and end dates of the week
Hi,
I was stuck with a problem in getting the start date and end date of the week,i know the month ,week and year also,with these three values how can i get the start and end dates of a week.please help me
ThanksThere is no simple way. It has to be a math calculation.
There are several ways you can get the dates. First you have to know what day is January 1st and what day is december 31st for a particular year. Second you have to check whether the given year is a leap year or not. Based on the abvove information you should be able to find out what day is a particular date.
Hope this helps to get you started.
- Venkat Dhurjati. -
I get either a grey screen or a flashing folder question mark. IT at my university said it wouldn't be till after the weekend and than still a few days to get it fixed so she told me to try to back it up myself because that's the only sure fire way to ensure I get all my Info. So any hints or help? They did a hardware test and they think it's my hard drive. I did a r+command restart
And it won't let me verify the disk.... Or download mountain lion.. Okay I know I sound clueless but can anyone help me?Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by:
Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
Boot drive's directory has been corrupted - Repair with Disk Utility.
Critical system files are damaged or deleted - Reinstall OS X.
The disk drive is physically non-functional - Replace the hard drive.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD:
Boot From The Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Maybe you are looking for
-
How to change from ext fire wire drive to Time Capsule retaining all data?
When I first got my new MacBook Pro I used an external FW 800 drive for my Time Machine back-ups. I have now got myself a ITB TC and would like to use that now for Time Machine. Can I copy what was on the external FW 800 to the new TC and continue ba
-
I've inherited a previously used early 2011 13-inch MacBook Pro at work. I now have my own account on the computer, however the account does not show up on the list of users to log in as in the start up log in screen. It will only appear if I first l
-
hey! it hasn't been a month since i got it, but i have a huge problem with my N79. when i type an SMS, it hangs after typing a few characters and all i could do is restart the phone. but once i do restart it and start typing another SMS, it hangs aga
-
I accidentally burned music under a data CD instead of Audio CD. How can I erase the data and use the disc for music?
-
Function module to find users for given authorization object
Hi Experts, I have to develop new report which display all the users who has authorization object which is given by us. i need some function modules to make my program simple. Please help me on this.. Thanks and regards, Raja