Daylight saving and alarm

Daylight savings time stared today and the alarm on my Z3v was correctly set to 0730. The alarm didn't go off though until 0830. I did set the alarm with google now, but around 8 o'clock i also checked the Alarm and Clock app and verified the correct alarm time was set and turned on. Then the alarm went off at 0830. It was a one time alarm and no other alarms were set.
Any one else have any issues?

If it was set to Google time and they didn't adjust the time on their end then this may account for the issue you had - I can however confirm that setting an alarm via the system Alarm app works
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

Similar Messages

Time change for daylight savings and Alarms not working correctly

we have 3 iPhones in our house. 2 were set to auto time change for daylight saving and one wasn't. 1 did the auto time change with out an issue and all alarms worked ok. The other 2 have had issues with not been able to set the alarms ie set alarm for 0630 and it goes off at 0530 even though the time is set correctly. The 1 that was set to autotime worked fine until I switch auto time off, now the alarms on this one wont work either. well they work but just at the wrong time. The 3rd phone will allow alarms to be set, but the alarm will go off an hour earlier and this phone will not allow the alarm to be set for 0630 at all.
Has anyone had this issue and resolved it. It makes getting up for shift work a right pain..

Read here:
http://www.appleinsider.com/articles/10/10/11/applesays_ios_software_update_to_fix_pesky_alarm_clockbug.html

Daylight saving and Outlook

I have an E51 and live in Darwin, Northern Territory.
There is no timezone for Darwin provided by Nokia, just Adelaide, also on Central Standard Time.
Now Adelaide has moved to dalight saving; Northern Territory time does not change.
I can correct the time manually on my phone but all my appointments from Outlook are on Adelaide time on my phone, Darwin time in Outlook on my PC.
Any ideas?

I am in Darwin also but I am on a network so my computer time has to remain as is. Nokia can handle daylight saving for Adelaiude but has not yet developed the software to enable the networks to recignose that the NT does not have daylight saving.
Keep complaining, folks - that makes it more likely that something will be done about the issue.
I sent the following to the local paper - which may or may not publish it:
"I wonder how many other people in the NT share my current frustration?
If I synchronise my computer calendar with my mobile phone now that SA is on daylight saving, all my appointments are I hour out as they are on Adelaide time.
After frustrating email correspondence with Nokia and phone conversations with multiple people at Telstra (who provided my Nokia phone) I am being told that it is a network problem.
My computer recognises my time zone as GMT+0930 (Darwin) but my mobile phone only offers time zones for Adelaide, Brisbane, Canberra, Melbourne Perth and Sydney (and can adjust to their daylight saving regime). However I am told that software is not yet developed to enable those of us who do not share the SA daylight saving period to remain on true local time.
Curiously enough earlier models of mobile phones apparently did not have this difficulty, nor do all current models. If you do not try to synchronise all will be well as long as you adjust the actual time read out on your phone. Synchronising is, however, impossible!
If anyone has a solution or can persuade Nokia and other mobile phone manufacturers to ensure that all their models can be on correct local time anywhere in Australia you will be doing a significant service!"

Daylight Saving and RTP Billing

Hi, We are using RTP Billing and the client has requirement to shift 1hr for TOU calculation (during Daylight Saving on). For example, Peak (TOU) is 7am to 5pm would shift to 6am to 4pm during Daylight saving on. Please let me know if we can achieve this without yearly involvement on Config change.
Regards, Kesava

Hi Kesava,
Day Light Saving in RTP Billing is taken care of by the Time Zone mentioned in the Profile Header and in the Installation. But in your case cause of the TOU mentioned it won't have any effect. It's unfortunately not dynamic. Would be a config change.
Do post on if you resolve this without config changes. .
Cheers,
Rakesh..
http://sapisurdg.wordpress.com/

Xmii Daylight Saving and OLEDB UDS

Hi All
I have a problem with my OLEDB UDS connection to PI
I am using Xmii OLEDB UDS version 4.0.2.5 to connect to pi
Java version : 1.4.2.07
SAP Xmii version 11.5
After moving into daylight savings period on october 28th @ 2:00am our data is out by an hour.
(all of the data below was taken at 6:30am)
TAG                                  DATE          TIME      VALUE ...
50210-LI-QVY-2101.01D-00 24-Oct-2007 06:30:00 6998.15 --- 0.00
50210-LI-QVY-2101.01D-00 25-Oct-2007 06:30:00 6507.75 --- 0.00
50210-LI-QVY-2101.01D-00 26-Oct-2007 06:30:00 6313.29 --- 0.00
50210-LI-QVY-2101.01D-00 27-Oct-2007 06:30:00 6277.06 --- 0.00
50210-LI-QVY-2101.01D-00 28-Oct-2007 05:30:00 5682.10 --- 0.00
50210-LI-QVY-2101.01D-00 29-Oct-2007 05:30:00 5073.77 --- 0.00
50210-LI-QVY-2101.01D-00 30-Oct-2007 05:30:00 4855.63 --- 0.00
50210-LI-QVY-2101.01D-00 31-Oct-2007 05:30:00 5360.67 --- 0.00
This only occurs when dat is queried through Xmii (via the UDS)
Runningthe same query using the pi-snapin for mmc OR using the PI test tools gives me the correct data (all @ 6:30)
It looks like the UDS does not adjust corrrectly for daylight savings
I have updated java using the timzone updater and tried almost everything I can think of to fix this.
by a process of elimination we have come to the conclusion that the UDS is the problem
Can you tell me :
1) is there a newer version of the OLEDB UDS available ??? (I tried to download this from the marketplace but it was not there)
2) what else can i try to fix this issue ???
Moving the timexone of the computer to GMT +9 to allow for daylight makes data correct after october 28th but wrong before October 28th
any help and/or idea would be greatly appreciated
Edited by: Chris Gray on Jan 14, 2008 7:57 AM

Hi Andy
I knew about the java issue, but going back down that path led to the solution !!!
The java timezone updater tool needs to be applied
http://java.sun.com./javase/tzupdater_README.html
What I didnt realise what that this needs to be applied to ALL JRE instances on the box.
The default (and only) option for the tool is to run against a single instance.
You have to copy the tzupdater file to each instance and re-run it
My JRE was updated but my SDK wasnt
This worked for me, hope it works for you too
"magically" daylight savings is now correctly handled - it has only taken me about 2 weeks to work this out but hey , got there in the end
Thanks everyone for your help.
Chris

TS1638 When syncing calendar on iPhone with Microsoft Office whole day appointments get moved to double day. I am aware this may be caused by conflicts in clock, viz daylight saving time. However, Outlook seems OK and takes time from Windows time and zone

When syncing my iPhone to Microsoft Outloook all the full day appointments become two day - 2300hrs to 2300hrs next day. Sometimes this will include a nuber of a single day of 23 hours. Looked at solutions and all point to a clock issue or a daylight saving and winter times. Outlook operating time is directly from the Windows clock that incudes the change of times for daylight saving etc. It is set for UTC Dublin, Edinburgh, Lisban, London with daylight saving included in the options. I can't see what I can do.

When syncing my iPhone to Microsoft Outloook all the full day appointments become two day - 2300hrs to 2300hrs next day. Sometimes this will include a nuber of a single day of 23 hours. Looked at solutions and all point to a clock issue or a daylight saving and winter times. Outlook operating time is directly from the Windows clock that incudes the change of times for daylight saving etc. It is set for UTC Dublin, Edinburgh, Lisban, London with daylight saving included in the options. I can't see what I can do.

DBConnect Daylight saving conversion

Hello Experts,
I am trying to extract data from Oracle Database tables and their Date format is Daylight saving and using their Oracle side function to convert it to "mm/dd/yyyy hh:mm:ss" is taking a lot of time while extraction.
So, i am tying to replicate the following code in SAP:
FUNCTION DATE_TIME_CONV (dRemedyDateIn IN NUMBER)
RETURN DATE
IS
dDateOut DATE;
BEGIN
IF dRemedyDateIn is NULL THEN
   RETURN NULL;
END IF;
      dDateOut := TO_DATE('12/31/1969 16:00:00','MM/DD/YYYY HH24:MI:SS') + ( dRemedyDateIn/ ( 60 * 60 * 24 ));
      IF ( dDateOut < DAY_LIGHT_SAVING_STARTS(dDateOut) )
            OR ( DAY_LIGHT_SAVING_ENDS(dDateOut) <= dDateOut ) THEN
            dDateOut := TO_DATE('01/01/1970','MM/DD/YYYY') + ((( dRemedyDateIn / 60 / 60 )- 8) / 24 );
      ELSE
            dDateOut := TO_DATE('01/01/1970','MM/DD/YYYY') + ((( dRemedyDateIn / 60 / 60 )- 7) / 24 );
      END IF;
      RETURN dDateOut;
END DATE_TIME_CONV;
Did somebody have come across this scenario?
Thanks
Arun

try to play around with these function modules..
GET_SYSTEM_TIMEZONE
TZ_LOCATION_TIMEZONE           Time zones: Determine time zone for a location (land, region)
TZON_GET_OS_TIMEZONE
TZON_LOCATION_TIMEZONE
TZON_CHECK_TIMEZONE
TZON_GET_TIMEZONE_TEXT
TZON_GET_USER_TIMEZONE

Solaris 10 daylight saving not working after install patch 122032-04

All,
I installed Solaris 10 with recommended patches. Patch 122032-04 also installed and some how when I test the daylight saving and does not work.
Any more patches should I apply for this to work?
Thanks for your help!

After removing every xf86-video-* package except xf86-video-nouveau, xf86-video-vesa and xf86-video-nv plus installing nouveau-dri and rebooting, it works. Thanks karol!

When there is no daylight saving, i am facing an error

Hello , I have created an add in for outlook, we setup meeting rooms, we
opened mailbox for each meeting room. Users are using Outlook 2010. We can now see all meeting rooms in our calender. And we are able to set up meetings with corresponding meeting rooms. The only issue I need to fix is that : When someone organize a meeting
in with other countries; as Australia, France, Korea , China.. some of these countries don't have daylight saving and when changing my local machine time to korea for example, it gives me an error.
This is a part of the code where getting the timeZone , plz help me to know what to change for coutries that don't have daylight saving.
// Make the request.
GetUserAvailabilityRequestType request = new GetUserAvailabilityRequestType();
// Get the local time zone
TimeZoneInfo zone = TimeZoneInfo.Local;
TimeZoneInfo.AdjustmentRule[] adjustmentRules = zone.GetAdjustmentRules();
string str_offset = "";
TimeZoneInfo.ClearCachedData();
TimeSpan offset = TimeZoneInfo.Local.BaseUtcOffset;
if (offset.ToString().Substring(0, 1).Equals("-"))
str_offset = offset.ToString().Substring(0, 3);
else
str_offset = offset.ToString().Substring(0, 2);
// Set the time zone of the request.
request.TimeZone = new SerializableTimeZone();
//TimeZoneInfo.BaseUtcOffset Property
//Gets the time difference between the current time zone's standard time and Coordinated Universal Time (UTC).
request.TimeZone.Bias = (int)TimeZoneInfo.Local.BaseUtcOffset.Negate().TotalMinutes;
for (int iAdjustment = 0; iAdjustment < adjustmentRules.Length; iAdjustment++)
if (DateTime.Now >= adjustmentRules[iAdjustment].DateStart && DateTime.Now <= adjustmentRules[iAdjustment].DateEnd)
request.TimeZone.StandardTime = new SerializableTimeZoneTime();
request.TimeZone.StandardTime.Bias = 0;
request.TimeZone.StandardTime.DayOfWeek = adjustmentRules[iAdjustment].DaylightTransitionEnd.DayOfWeek.ToString();
request.TimeZone.StandardTime.DayOrder = (short)adjustmentRules[iAdjustment].DaylightTransitionEnd.Week;
request.TimeZone.StandardTime.Month = (short)adjustmentRules[iAdjustment].DaylightTransitionEnd.Month;
request.TimeZone.StandardTime.Time = adjustmentRules[iAdjustment].DaylightTransitionEnd.TimeOfDay.ToString("HH:mm:ss");
request.TimeZone.DaylightTime = new SerializableTimeZoneTime();
//TimeZoneInfo.AdjustmentRule.DaylightDelta Property
//Gets the amount of time that is required to form the time zone's daylight saving time. This amount of time is added to the time zone's offset from
Coordinated Universal Time (UTC).
request.TimeZone.DaylightTime.Bias = (int)adjustmentRules[iAdjustment].DaylightDelta.Negate().TotalMinutes;
request.TimeZone.DaylightTime.DayOfWeek = adjustmentRules[iAdjustment].DaylightTransitionStart.DayOfWeek.ToString();
request.TimeZone.DaylightTime.DayOrder = (short)adjustmentRules[iAdjustment].DaylightTransitionStart.Week;
request.TimeZone.DaylightTime.Month = (short)adjustmentRules[iAdjustment].DaylightTransitionStart.Month;
request.TimeZone.DaylightTime.Time = adjustmentRules[iAdjustment].DaylightTransitionStart.TimeOfDay.ToString("HH:mm:ss");
// Add the mailboxes to the request.
request.MailboxDataArray = mailboxes;
// Add the free/busy view options to the request.
request.FreeBusyViewOptions = fbViewOptions;
DateTime startExchange = DateTime.Now;
// Send the request and get the response.
GetUserAvailabilityResponseType response = esb.GetUserAvailability(request);
DateTime endExchange = DateTime.Now;
TimeSpan timeWSE2010 = endExchange - startExchange;
CLogger.WriteLog(ELogLevel.INFO, "getListRoomsExchange2010 -timeWSE2010-WS=" + timeWSE2010.ToString());
// Access free/busy information.
if (response.FreeBusyResponseArray.Length < 1)
MessageBox.Show("An error occurred while getting the available rooms - No free/busy response data available.", "Pick A Room");
CLogger.WriteLog(ELogLevel.ERROR, "GetUserAvailability - An error occurred while getting the available rooms - No free/busy response data available.");
else
for (int j = 0; j < response.FreeBusyResponseArray.Length; j++)
FreeBusyResponseType fbrt = response.FreeBusyResponseArray[j];
if (fbrt.ResponseMessage.ResponseClass == ResponseClassType.Error)
Console.WriteLine(string.Format("Error: {0}", fbrt.ResponseMessage.MessageText));
else
//Get the free/busy data
FreeBusyView fbv = fbrt.FreeBusyView;
if (!fbv.MergedFreeBusy.Contains("2") && !mailboxes[j].Email.Address.ToString().Equals(""))
availableUsers = availableUsers + ThisAddIn.dictionaryRooms[mailboxes[j].Email.Address.ToString()] + ";";
catch (Exception ex)
//Error processing.
MessageBox.Show("An error occurred while getting the available rooms - Exception:" + ex.Message, "Pick A Room");
CLogger.WriteLog(ELogLevel.ERROR, "getUserAvailability - An error occurred while getting the available rooms - Exception:" + ex.Message);
return availableUsers;

Hi,
Please post the detailed error message, it’s more helpful for further troubleshooting.
Since the add-in is related to Outlook client, I recommend contact Outlook for Developers Team so that you can get more professional suggestion.
For your convenience:
https://social.msdn.microsoft.com/Forums/en-US/home?forum=outlookdev&filter=alltypes&brandIgnore=True&sort=relevancedesc&filter=alltypes&searchTerm=
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

Possible Daylight Saving Alarm Fix

Hi all
This may help some (perhaps not all) people that have alarm issues with alarms following the end or beginning of daylight saving. It worked for me.
1. Check that your location in the World Clock is showing the correct time.
2. Delete all alarms (don't just turn off, delete them).
3. Recreate all alarms that you need.
Again, this did work for me. You may also want to create a test alarm just to make sure. Hope this helps.
Russ in Sydney

If it was set to Google time and they didn't adjust the time on their end then this may account for the issue you had - I can however confirm that setting an alarm via the system Alarm app works
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

Alarm clock, recurrence does not work after daylight saving in Sydney

Any iphone 4 users having the same problem since daylight saving?
It woke me up 1 hour before the set alarm time, e.g. 5.55am instead 6.55am
The one off alarm works fine.
IOS4.1 + Itune 10

Use the search box before posting "new" threads.
http://discussions.apple.com/thread.jspa?threadID=2603262&tstart=0

Problem with SLQ Date and Daylight Saving Time

Hi everybody!
It seems, that when I have a date in the database, which falls on start of the daylight saving period, it is converted to the previous date.
Example: '2001-10-13' will become '2001-10-12' after doing a date = rs.getDate() and then converting back using date.toString().
This caused a lot of trouble because the date value is part of an unique key constraint!
Currently I wrote a wrapper method, which obtains the date as string and converts this one into a date by setting the hours to 12:00.
Does anybody know a straighter way to avoid the conversion?

Because the default time zone is using day light saving time. To remove this feature, reset your default time zone at the very beginning of your program:
TimeZone.setDefault( new SimpleTimeZone( TimeZone.getDefault().getRawOffset(), TimeZone.getDefault().getID() );

Java 1.4 and Daylight Saving Time 2007

The current version of Java 1.4.2 for Tiger, 'Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_09-244)' does not handle the new 2007 Daylight Saving Time rules correctly. Will Apple be updating Java 1.4.2 to the version that does support 2007 DST correctly? (at least 1.4.2_11 is required per Sun, http://java.sun.com/developer/technicalArticles/Intl/USDST/).
If so, when? Thanks!

Since you didn't list your computer, here's a link to Java 5.0 release 4 for both PPC and Intel-based Macs, which came out in April: http://search.info.apple.com/?q=J2SE50Release4.dmg&type=kbdload&search=Search&lr =lang_en&search=Go. That should solve your problem.

Clock UI control and daylight saving time.

Hi,
We have a customer that has several sites around the world.
In a VC-model I like to use the Clock UI control to display the times of the different sites.
This can be done by setting the time zone in the control properties.
A long ago we have introduced daylight saving time.
It seems that the clock control does not do anything with this ?
How can I change the time zone when the model is running ?
Can it be done by an expression and how ?
There is also a problem of the country, some have DST, others dont.
See http://en.wikipedia.org/wiki/Daylight_saving_time_around_the_world
Example:
I have 2 clocks and the end-user lives in Amsterdam:
Amsterdam, time zone = GMT + 1
Santiago, time zone = GMT 4
During the winter in Amsterdam it is summer in Santiago and has daylight saving so the time in Santiago should be GMT 3 in stead of GMT -4.

With the current version of VC / flash, it is not possible to display the correct time all the year 'round.
If you only want to show the (user) current time then you can use this VC clock object.
If you need to show clocks from different cities around the world, than its better NOT to use the VC clock.
Because you can not define the country and city in the clock properties, that determine the use of DST, it will not always show the correct (default / DST) time.
Solution:
Add a HTLM-view to your model with a links to a web clock.
Nice (free !) clocks can be found (and customized) on <a href="http://www.worldtimeserver.com/clocks/wtsclock001.aspx">worldtimeserver.com</a> or <a href="http://www.timeanddate.com/clocks/free.html">timeanddate.com</a> .
Example:
For the city Santiago (Chile) the URL =
http://free.timeanddate.com/clock/ielrw91/n232/tluk/fn13/fs16/fc009/tt0/tw1/td2/th1/ts1/tb4

ActiveSync Calendar and Daylight Saving

Israel moved to Daylight Saving time and now all meetings scheduled by someone on that timezone are one hour off.
- Meetings look okay on Outlook or OWA
- the iPhone clocks are adjusted to the time change.
In addition to my other post on meetings not synchronized (http://discussions.apple.com/thread.jspa?threadID=1715532&tstart=0) , my calendar is completely useless...
Any fix for that?
Should I switch back to Windows Mobile to get my productivity back up?

I'm having the same exact problem. I've tried disabling Calendar Sync, I've tried deleting the entire ActiveSync account profile and it's still not working. All of my meeting continue to arrive on my iPhone an hour later then the meeting actually takes place. Looking at Calendar within Outlook, everything appears fine. Definitely had this problem since DayLight Savings went into place.

Daylight saving and alarm

Similar Messages

Maybe you are looking for