Daylight savings moved all my event ahead one hour

When Daylight savings kicked in all of my iCal events were bumped ahead 1 hour, is there a fix for this?

I'm not sure why your appointments would have changed
Because the time for appointments are relative to GMT. DST changed relative to GMT which never changes. You can force the times to always remain the same by turning on Time Zone Override.
You have to remember that when put events into a calendar that the time is relative to GMT and your location. Put an event that is a 5:00P EDT and fly to California the time if the event will change to 2:00P PDT. The event is still occurring at the time you specified as it is still 5:00P on the east coast. If you have an event scheduled in California and you enter the event into your calendar while you are in New York you need to put the time for the event as when the event will occur in New York. Then when you arrive in California the time of the event will adjust.
You can skip all this by turning on Time Zone Override and selecting the time zone you always want to use.
It sort of makes sense once you get used to it. I fly to Europe a lot from the east coast. When I enter my flight information the times are relative to the time in New York when the event will occur in Europe. I have to make some mental calculations to add six hours to the event time. My calendar now shows the true duration of the event, especially when flying.

Similar Messages

Daylight savings pushed all my appointments ahead 1 hour

I'm using iOS 8 on an iPhone 6. I dug deep into the system settings and could find no daylight savings settings to adjust. Have I missed one? Also note, this is only an issue on my iPhone. The times are still correct on my desktop calendar and on my icloud.com calendar. I have yet to check my iPad though. Any suggestions to correct the time. Thanks.

I'm not sure why your appointments would have changed
Because the time for appointments are relative to GMT. DST changed relative to GMT which never changes. You can force the times to always remain the same by turning on Time Zone Override.
You have to remember that when put events into a calendar that the time is relative to GMT and your location. Put an event that is a 5:00P EDT and fly to California the time if the event will change to 2:00P PDT. The event is still occurring at the time you specified as it is still 5:00P on the east coast. If you have an event scheduled in California and you enter the event into your calendar while you are in New York you need to put the time for the event as when the event will occur in New York. Then when you arrive in California the time of the event will adjust.
You can skip all this by turning on Time Zone Override and selecting the time zone you always want to use.
It sort of makes sense once you get used to it. I fly to Europe a lot from the east coast. When I enter my flight information the times are relative to the time in New York when the event will occur in Europe. I have to make some mental calculations to add six hours to the event time. My calendar now shows the true duration of the event, especially when flying.

Accidently Moved all my events into one event

My Mac was running slow so accidently dropped all my events into one.
I then closed and reopened Iphoto hoping the changes wouldnt take effect.
Urgently need to undo the action. The UNDO button is greyed out.
I clicked on Autosplit events, but how can i get my last copy of the library back and reload? Where is it saved?
Please help

No, it doesn't. You must be proactive in setting up a backup strategy like using Time Machine with an external HD. If you haven't setup a backup plan then you have no backup of the library to fall back on.
So you're only course of action is to split (auto or manually) the one large event into events based on your criteria, i.e. by date, by photo opportunity, etc. It could take a while. One way to do it by date, i.e. by month is to use the Search function at the bottom of the window and do a search by each month of the year, When you get the results for the first month, select them all and use the Events ➙ Create Event menu option. This way you can create an event for each month of each year.

Domain Controller resets time ahead one hour on reboot

I have a Windows 2003 R2 domain controller that is running on a Windows 2012 Hyper-V cluster. Time sync between the host and guest are disabled. The last two times the Domain Controller has been rebooted, time has jumped ahead one hour on the Domain Controller
which is also our NTP server for the company. Our DC's have been virtualized for 5-6 years, first on VMware, then on hyper-v 2008 r2 now on 2012.
I have verified that hosts and guests are configured for the correct time zone and the DST is enabled. The first incident occurred the weekend after the time change, so I thought maybe their was some DST issue.
Any thought on why it would jump ahead exactly one hour after reboot?

Might need the latest cumulative time zone updates.
http://support.microsoft.com/kb/2863058
http://blogs.technet.com/b/dst2007/archive/2013/08/13/august-2013-dst-cumulative-update-for-windows-operating-systems.aspx
http://support.microsoft.com/kb/2890882
You can also compare the setting here.
http://support.microsoft.com/kb/914387
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Multiple all-day events and one event disappears.

I have multiple all-day events (in different calendars) and now sometimes (not always) one event won't show in iCal. It's still there cause it's now "....." instead of the name of the event.
The old multiple all-day events show perfect but when I try to add another multiple all-day event now, it will only show one all-day event. It will show as maybe timed event as I wish but only one all-day event.
I don't get why this has happened cause I have not changed anything from before except for maybe timezone.
Any ideas?
Thank you

It seems that iCal only displays 5 all-day events, even if you have plenty of room in the calendar window. Change them to timed events and you can see more. Very annoying. I'd like to find a way to change that.

Adjusting all events by one hour?

Is there any easy way to push back the events of a single calendar by one hour? For example: I have a calendar on CST that I want to move to EST, but I really don't want to change each even individually.
Also, while I'm asking-- is there a script or something that lets your prune the beginning/end of event titles?
Thanks

Hi,
To move all events of one calendar, take a look at my Offset iCal Events applescript on this page.
If you want to move events between timezones, you should look into using timezone support in iCal.
Best wishes
John M

Organizing multiple all day events in one day

I'm trying to figure out if I can use iCal to act as my doggy daycare biz calendar.
I tried adding each dog's appointment as an all day event, creating multiple all day events per day, however I can't figure out if there is a way to organize the order of these events. They seem to appear in the order I add them in and I can't change that. Especially when I make some of the entries repeat on a daily basis the order just gets more and more messed up. I've tried doing this with only 5 clients as a test and things are looking horrid so far. I would need to be able to enter about 20 clients, and under multiple calendars.
Would be nice to be able to have this on my computer and on my iphone by using the iCal as opposed to maintaining my current pen and paper system. Any suggestions?

You can't change the order of the event, they do go in based on the order they are entered.

Outlook all day events are one day early in ipod touch calendar...

I recently bought an ipod touch 4th generation, when I tried to sync my outlook 2007 calendar all my all-day-events came up as a whole day early on my ipod touch. I'm running iOS Version: 4.3.5 and App Version: 3.3, outlook 2007 off windows 7. I see there are a lot of unresolved older threads around the same discussion point...did anyone get anywhere?
- Anita

Hi,
Same problem.
Thx

Time of Facebook events off one hour in Lumia 520 ...

Since a few weeks, the times of events created in Facebook are entered incorrectly in my Lumia calendar, all events after 29 March (the start of the summer time) are one hour too early. How can this be fixed? The times are correct in the Facebook events themselves. The appointments that I entered in the calendar manually are still at the right time.

Hi, astrid79. Just to verify, is your date and time settings set to automatic? For some countries, Daylight Saving Time (DST) has been made to effect on March 30. If you are in a country where they observe DST, this can be one of the possible reasons. Another is if you change your calendar settings on calendar.live.com To verify this, can you go to:
calendar.live.com > settings / gear icon > Options > choose your primary calendar > Default reminders for events and tasks > Notifications on your device > At start time
Hope this helps. Let us know the outcome.

It says iCal will default events with no end time to one hour..and mine used to..but since I upgraded to Lion it doesn't. Any suggestions as to how I can get it to default events to one hour?

My iCal used to default to one hour when I posted an event with a start time and no end time. The user guide says it will default to one hour. Since I started using OS Lion, my calendar doesn't do that. Can anyone suggest a way for me to get the calendar to default to one hour again? Thanks.

Dana,
Here are some iCal data entry tips from iCal Help:
Enter a name, date, and time duration for the event, and then press Return.
For example, you can enter “Super Bowl Party Feb 5,” “Movie with Rebecca on Friday at 7pm,” “Soccer Game on Saturday from 11am-1pm,” or “Breakfast with Jon,” and then press Return.
If you don’t enter a time duration for the event, iCal sets the event’s duration to 1 hour.
If you don’t enter any time information for the event, iCal makes the event an all-day event.
If you enter “breakfast” or “morning,” iCal sets the event to start at 9 a.m.
If you enter “lunch “ or “noon,” iCal sets the event to start at 12 p.m.
If you enter “dinner” or “night,” iCal sets the event to start at 8 p.m.

All day events converting to hourly events

If I enter an event on my computer it converts to hourly events on my iPad and iPhone. Very frustrating. Does anyone have a solution.

If I understand your issue properly...
I've had success recreating this issue. This doesn't differ from iOS 5 to iOS 4. You may want to check here http://support.microsoft.com/kb/2563324
It's common in exchange 2007 but there has been a bug identified in exchange 2010 regarding all day events also.
You can actually change the setting on the device to "all day event" and have it stick. What is really odd is when you have a user with two iOS devices and set the all day flag on one you can watch it revert on the other device to a 24 hour appointment.

My time capsule change the time on ALL my files by one hour.

On the 29th December all the files on my time capsule went out of sync with my mac by one hour. I use it for backup. I have other backups on a Lacie drive and these were all OK but because it went forward in time my syncronise software saw them all as changes and started copying from the time capsule to my iMac. I stopped it and after recovering the damage it had done I proceeded to copy ALL my data back to the time capsule to reset the syncronise error.
Its been OK since then but this morning it all went wrong again. It started by my backup failing because the network share was not accessable so I went into my backup scripts(chronosync) and reselected the backup drive. I then did a trial sync and lo and behold the whole lot is back out of sync again and this time they have gone back in time.
Did we enter British summer time in the middle of winter or did the earth tilt on its access and caused the UK to be in The NEtherlands? Or did Apple do something that I cant resolve.
Anyone else having similar problems? Ive been googling this and thought I had found it by installing Airport Uitlity 5.6 but I cant do that as I have upgraded all my machines to MOuntain Lion and its not compatible. I think on 5.6 you can adjust the time zone setting.
I need to tell the time capsule which time zone it is in and all shoudl be OK

Bob
Thanks for that - Airport utility 5.6 is now working but I cannot see anything wrong. It possibly went wrong on the 29th December and has just gone back to normal again so I think I will have to let the backup recopy all the files.
I looked in the logs and found
No Address for NTP server time.apple.com. and then on Jan 08 at 09:49:38 I got
Clock synchronized to network time server time.apple.com (adjusted +3597 seconds). (thats my hour!!!)
Question no is why - could be a DNS problem but why on the 29th and back on the 8th Jan.
Nothing changed in my network router, maybe something at the ISP.
Anyway now copying all the data back to the time capsule.
By the way I have my DNS as my router 192.168.1.1 and 208.67.222.222 - when I look at my router the DNS is 8.8.8.8 and 4.4.4.4 which is what my ISP told me to use. Maybe I should put 8.8.8.8 and 4.4.4.4 in the DNS for the time capsule?

Query to get all minutes in last one hour

Dear All,
I am trying to write a query that returns every minute in last one hour.
Like now, if the time is 4:15
The query returns;
3:14
3:15
4:11
4:12
4:13
4:14
4:15
Please suggest a logic.
Thank you so much.
Regards, Imran

You can also add or subtract INTERVAL literals to or from a DATE, for example:
SYSDATE - INTERVAL '5' MINUTE
The result is a DATE.
Frank @ Getting the hour,seconds and minutes of a date data
Regrads
Girish Sharma

Daylight Savings Caused all jobs to be scheduled 1 hr ahead

Hi All,
Do you all know if there is a fix or solution to change back all the jobs back to the original time and
how can I fix this bug in SAP Central - Redwood 704
Thanks,
Naren

Hi my friend
Please check
Note 1120177 - DayLight Saving not accounted during time zone conversion
Note 1001092 - Daylight Saving Time - Changes in 2007
Besides, there are some changes are OS/DB dependent, such AIX/HPUX/SPARC/ORACLE, you also need be be aware of.
Regards,

ICal moves events ahead one day

iCal will move random events to the next day.
Example, mothers day to the 12th, Monday.
Is there a fix? We use iCal for appointments and have to back it up with a paper calender just to make sure we don't miss anything.
Needless to say this is very annoying.

When syncing my iPod with iTunes, my appointments
from iCal are all shifted one day ahead on the iPod
(60GB Color).
For example, the correct appointment in iCal is:
Tuesday, at 7pm
On iPod, the appointment shows up as:
Monday, at 7pm
Can someone please tell me what I'm doing wrong?
Pleeeeeease. Thanks in advance.
I have exactly the same problem. Only on recurring entries. I have checked everything to make sure the time, date and timezones are correct.

Daylight savings moved all my event ahead one hour

Similar Messages

Maybe you are looking for