Daylight Savings Time and Time Zone Issue:

Howdy! Many of us woke up this morning to be dismayed to find that our iPhone was TWO hours behind instead of falling back one for the Daylight Savings Time adjustment, and were late for church. I have an iPhone 4S, with iOS 5...
I was working at that time of morning, and the initial switch went well. However, when I woke up, the clock was yet another hour behind. A little investigation showed that the Time zone had been changed to Denver (It was previously on Chicaco, and I live in Dallas.) I tried to select it to change it, and it wouldn't allow me. If I turned off the Set Automatically feature, then I could change it, but when I turned the Set Automatically feature back on, it would re-set the time zone to Denver.
I found another thread where they discuss this:
https://discussions.apple.com/message/16644669
To fix this, put in airplane mode, then back out again, then re-choose your correct time zone. If this doesn't work, then try turning your phone completely off and then on again. Thanks to 4n6doc for the tip!
The airplane mode trick worked for me: I turned airplane mode on, then off, then went to the Date & Time and set my time zone to Dallas, TX while the Set Automatically was off. When I turned the Set Automatically back on, it changed Dallas to Chicago, which is what every iPhone iOS I've ever had has done.

Hi,
Yes this is a correct way to fix the issue. One thing however, how did you set the timezone? For correct daylight saving handling, you'll have to use the long version, like America/New Yorw, NOT GMT-5 (for example).
regards,
~ Simon

Similar Messages

Just bought a new iPhone and am having trouble with iTunes and App Store. I can log in to Cloud, iTunes, and app store but once I try to download, it says "Youe apple id has been disabled". I've reset my password three times and have no issue on my Pad.

Just bought a new iPhone and am having trouble with iTunes and App Store. I can log in to Cloud, iTunes, and app store but once I try to download, it says "Youe apple id has been disabled". I've reset my password three times and have no issue on my Pad.

Hi FuzzyDunlopIsMe,
Welcome to the Support Communities!
It's possible that resetting your password multiple times has triggered this security. Click on the link below for assistance with your Apple ID Account:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Here is some additional information regarding your Apple ID:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears
http://support.apple.com/kb/ts2446
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
Click on My Apple ID to access and edit your account.
Cheers,
- Judy

My APPLE ID is NOT working properly. I am frustrated beyond belief I have tried time and time again to change my apple ID and it keeps reverting back to my original ID!! I even set up a new email to try to submit a new id and it still does not work

My APPLE ID is NOT working properly. I am frustrated beyond belief I have tried time and time again to change my apple ID and it keeps reverting back to my original ID!! I even set up a new email to try to submit a new id and it still does not work

To change your Apple ID, follow these steps:
Go to My Apple ID (appleid.apple.com), click "Manage your Apple ID", and sign in.
If you have two-step verification turned on, you'll be asked to send a verification code to the trusted device associated with your Apple ID. If you are unable to receive messages at your trusted device, follow the guidelines for what to do if you can't sign in with two-step verification.
In the "Apple ID and Primary Email Address section," click Edit.
Enter the email address you want to use, then click Save Changes. Apple will send a verification email to that address.
Open the email from Apple, then click Verify Now in the email.
When the My Apple ID page opens, sign in with your renamed Apple ID.
If you have two-step verification turned on, you'll be asked to send a verification code to the trusted device associated with your Apple ID.
After you see a message indicating that verification is complete, remember to update all of the stores and services that you use with your Apple ID.

I am new to Firefox; how do I set up for auto fill for the various forms that need the same info time and time again; thanks.

I am new to Firefox; how do I set up for auto fill for the various forms that need the same info time and time again; thanks.

Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.org/kb/Private+Browsing
*Tools > Options > Privacy, choose the setting Firefox will: Use custom settings for history
*Deselect: [ ] "Always use private browsing mode"
*Select : [X] "Remember search and form history"
See also:
*https://support.mozilla.org/kb/Form+autocomplete
[locking thread due to the age]
If you have further questions then please start a new thread.
*[[/questions/new start a new thread]]

How do i change 2 row of array into waveform with delta time and time

Hello,
How do i change 2 row of array into waveform with delta time and time
so the waveform graph will display two waveform,
waveform, not cluster =]
and how to extract 1d array from waveform?

Hi AxE,
Here is an example VI, that do what You asked for.
Both requests.
Hope it Helps...
Attachments:
2D_to_Waveform.vi ‏75 KB

Usb mouse auto disconnect time and time,Screen flash and flash when I use discrete graphic card

as title
My usb mouse auto disconnect and reconnect time and time,
no one knows when the mouse will disconnect,but every time when that mouse disconnect ,it will be reconnected in 2-5sec.
Screen flash and flash when I use discrete graphic card with the battery or use AC when connect the external display with VGA CABLE.
Mouse: Logitec G400/G1
Display:Lenovo D2081WIDE
machine:T430 2349 CTO

system info:
machine TYPE: THINKPAD T430 /2349CTO
operating system :Lenovo OEM ultimate X64 SP1
mouse type:Logitech G400 and Logitech G1
time:from 2012-10 to now
threat NO.1
USB mouse auto disconnect and reconnect time and time,no one knows when the mouse will disconnect,but every time when that mouse disconnect ,it will be reconnected in 2-5sec.
every time when the mouse disconnect I heard the sound which like USB DEVICE unplug,and when it reconnected I heard the sound which like USB DEVICE plug in.
threat NO.2
Screen flash and flash when I use discrete graphic card with the battery or use AC when connect the external display with VGA CABLE.
threat NO.3
the battery auto losing capacity!!!!!!
1% everyday about 0.2Wh
since I bought to now,
the Design capacity has losing from 57.XX Wh to 47.52Wh
and full charge capacity is 48.68.
the battery info:
cycle count is 18
Bar-Code number 1ZKFD27S1RF
SerialNumber 1896
First used date 2012-09
FRU 45N1001
Firmware 0003-0080-0100-0165

Conversion from summer time (daylight savings) to winter time.

Hi All,
When converting from summer to winter time (with one double hour) for the ABAP stacks action needs to be taken to make sure no problems arise. For the ABAP stacks there are several possibilities; e.g. see /people/tikkana.akurati/blog/2009/12/09/daylight-saving-time-and-slowing-down-the-time
What about the JAVA stacks however? Is it OK to keep them running.>Or does action need to be taken for JAVA systems to? And what if there is JAVA <-> ABAP communication and the ABAP stack is set to slow time during this hour?
Can anyone advise on this?
Thanks.
Regards,
Bart Groot

Hi,
Well it is no more necessary to stop an ABAP system when coming back to winter time.
Check OSS note 950114 about system parameter zdate/DSTswitch_contloctime
For the JAVA stack, as there is no functional data in the database, I don't think there is anything to do.
You might get strange logs files but who cares ? Java logs files are already so strange !
Regards,
Olivier

Question on date, time and time stamp related - high priority

Hi friends,
My requirement is to find the processing time (time taken) of a task done by an agent in wf. For that I use Start Date, Start Time, End Date and End Time ( from struc SWP_LOGTAB ). I have to display the time taken by an agent in the form WWd XXh YYm (or WWd XXh YYm ZZs) ex: 2d 10h 40m 20s.
Can any one suggest me the right FMs which take start and end date/time and give me the above format result?
This can be achieved manually with unnecessary Ifs and CASEs but its gonna be a performance issue. Please suggest me something SAP standard.
Thanks in advace for your help
Reddy

Hi,
I don't find any function module, but it does'nt really hard to code this using DIV and MOD instructions :
If you've got your time in seconds :
w_day = w_time DIV 86400.
w_mod = w_time MOD 86400.
w_hour = w_mod DIV 3600.
w_mod = w_mod MOD 3600.
It doesn't seem too bad in term of performance....
Mathieu

Question on date, time and time stamp related

Hi friends,
My requirement is to find the processing time (time taken) of a task done by an agent in wf. For that I use Start Date, Start Time, End Date and End Time ( from struc SWP_LOGTAB ). I have to display the time taken by an agent in the form WWd XXh YYm (or WWd XXh YYm ZZs) ex: 2d 10h 40m 20s.
Can any one suggest me the right FMs which take start and end date/time and give me the above format result?
This can be achieved manually with unnecessary Ifs and CASEs but its gonna be a performance issue. Please suggest me something SAP standard.
Thankful for your help
Reddy

Hi
I will refer you to use SWWIHEAD table to retrieve start date and End Date of a Task. You have to write aprogram for this. You can find out the task from the field TS94000083 from WI_RH_TASK.
Please provide points if useful
Thanks
Arghadip

GPS Access to high precision time and time stamping WASAPI microphone captures

I am interested in using multiple WPs to capture microphone WAV that is time stamped with high accuracy (sub millisecond), hopefully from the GPS system. The GPS hardware obviously has the capability to sub microsecond levels but I can't find an API for
it.

What I would like to do is get geo positional data, which has a defined statistical uncertainty but might be relatively better correlated and as accurate a time stamp as possible. Latency isn't an issue but consistency is. GPS, of course, easily produces
time information to sub microsecond though I don't know a way to access it in WP. .1ms consistency would be all I really need but it's important that each phone in a cluster be able to capture and time stamp a sound (assume all phones are equidistant
from a source) to within .1ms. I am thinking of a product that could be used, for one obvious example at weddings, to capture the proceedings and allow after the fact enjoyment by replaying the proceedings and shifting the focus on the bride/groom minister
as they talk using beam forming dsp tech from the data. There are other ways but it occurs to me that the ubiquity of smart phones would really make this easy. Just have the guests download an app. It would be part of a wedding doc package along with videography
and stills.

Urgent---Timer and timer tasks

Hi ,
I need to poll some devices on the network...
I have a method exposed in my class for this purpose.
I have a timer and a timer task to do this job for me at regular intervals..
I understand that the timer will spawn a separate thread for this purpose..But if there are multiple requests fot the poll,then each request will spawn off a new thread as i have understood...
Wont it clog the system with too many threads?
How do i acheive this task?Is there any other alternative?
Please help....
Regards

Additionally, if you start a timer and can't reuse it, for whatever reason, you ought to stop it and free its resources in order to not clog up the system. Does the spawned thread run on, or does it stop after returning? Maybe the system isn't clogged up after all?

How to handle SQL code for Daylight Savings for MST Time zone

Hi,
1. My time zone is MST. My data showing differently as day light saving started from November. Please help me how to handle these issue.
2. After Mar 09 2014 Daylight saving going to end.( For this how to handle in the SQL codes)
Please answer for the above 2 doubts.
Thanks in advance.
Regards,
LuckyAbdul

Hi Abdul,
Daylight saving is basically like switching to another timezone. If your normal time zone is Mountain Standard Time (MST), you will switch to Mountain Daylight Time in the summer.
If daylight saving or timezones are a concern. It is best to store your dates in a DATETIMEOFFSET(0) column. This data type includes the offset between your selected timezone (MST or MDT) and UTC. The offset between MST and UTC is -7 hours and the offset
between MDT and UTC is -6 hours.
Be sure to datetimeoffset(0) and not just datetimeoffset. datetimeoffset(0) uses 8 bytes to store it's data (same as datetime), but datetimeoffset uses 10 bytes. This is especially important if you are going to index this column.
Also be sure to use a similar data type in your application or the timezone information will be lost. If it is an .Net application you should use The DateTimeOffset type. Most other programming languages have equivalent types.
Hope this helps. If you have anymore questions please let me know.
For more information see:
http://msdn.microsoft.com/en-us/library/bb630289.aspx
http://msdn.microsoft.com/en-us/library/ms187819.aspx
http://msdn.microsoft.com/en-us/library/system.datetimeoffset%28v=vs.110%29.aspx

Wifi but no internet, wrong time, and mail client issues on macbook pro

A few things have recently come up that are worrying me...
1. My wifi says it is connected to my apartments internet, and yet I dont have any internet. Meanwhile. my roommate is able to get on the internet on his desktop PC. I am afraid I changed something accidentally in my network settings. It says something about unable to connect to DNS server? (I am on campus using their internet to send this)
2. My Clock is wrong. Even when I reset the timezone, it is saying the time is 3:01 am when it is actualy 11:01 am.
3. LAstly, my mail client is no lponger getting my mail. I am able to get all the messages on my iphone, but for some reason my macbook is not getting them.
Any help is greatly appreciated. THanks you much!

Your wifi is connected to the router but the modem may be faulty. Try reporting the modem.

I do updates and then have to reinstall previous versions - time and time again because of the number of unsupported add-ons

4 or 5 times I've updated Firefox only to have to reinstall the previous version due to incompatibility with add-ons / plug-ins / toolbars. I'm not a big user of Toolbars but I have some add on I use daily.
The last 3 times I did a "suggested by Firefox" update I've had to reinstall a previous version from my saved files in order to use Firefox. This problem has caused me to return to IE as my default browser - but unwillingly.
My current setup is Firefox 4.0.1 Beta and I had to reinstall a version 3 in the Firefox folder until addons starting working in this 4.0.1 Beta. However 4.0.1 has always hung up, even opening a tab and ceases to respond; sometimes for minutes.
I run Win XP - SP3 Dell Pentium 4 - 3.0ghz with 4 gigs of DDR2 - GX520. So it's not an equipment problem - (I have 4 PC's on my home LAN - although each serves it's purpose and seldom are 2 used at the same time.
When I installed 4.0.1 and then reinstalled 3.x ... I've been hoping for an update --- I love Firefox - have ever since first use - and then today I saw the update versions had jumped from 4 all the way to 7. I was enthused.
Same issue. On install over the V 3.x it showed 6 items of add-ons that were incompatible. I did not remove the V 7 ... I simple reopened the 4.0.1 beta. I use it for single page browsing as tabs locks it up or slows it to a crawl.
I'm having to continue using IE as my default --- I always keep a backup browser, but I don't care for much of anything that has an MS on it's name.
I've never posted to Mozilla ... but the idea crossed my mind over a year ago when I updated and had to back-up and reinstall. WHY can't a program precede the update to check for compatibility, just as an upgrade adviser from one OS to another?
This was the biggest list of all. NET Framework Assistant, Google Toolbar, Yahoo Toolbar, Roboform ... there were 2 others. I don't use the Yahoo Toolbar. I have Google Toolbar installed but keep it hidden except when I need it (for Page Rank, etc., I work websites).
But I won't use a browser that doesn't support AI Roboform.
I honestly love Firefox. I code webpages - .asp, .html and do SEO ... but I don't know the difficulty of writing even a small application. Would it be too difficult to have a small program that would check for these add-on incompatibilities before installing the updates.
I was impressed with 4.0.1 beta until I realized that opening a new window or tab bogged it down.
I want Firefox back but not with band-aids and work-around bandages. Is there a version between 4.0.1 and v7 which I tried tonight that would support my plug-ins / add-on. My experience with Firefox using versions up to 3.x has been great. But for months and months I open 4.0.1 and open my TV guide at ZapIt and then I've had to use IE 8 for all my web browsing.
My most important add-on is for Roboform and 2nd would be for Google Toolbar - but on a scale of 1-10 Roboform is a 10+ and Google Toolbar a 3.
If this post does not go to the support team at Firefox then how would I go about suggesting an Update Adviser prior to installing an update?
Anyone with a flexible solution - even short term - that would allow me to see Firefox improvements since the v4 I'm using would be more appreciated than I could ever express.
Since I've never posted before I'm not even sure how I'll get a response or be able to see any responses. Something during the registration said I could get an email when a reply was posted.
Thanks again for listening to me whimper and beg for a workable Firefox; I miss it.

this is all I can find, thank you for your time.
Problem signature
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Files that help describe the problem
Mini010710-11.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning:If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.
Extra information about the problem
BCCode: 1000007f
BCP1: 00000008
BCP2: 80176000
BCP3: 00000000
BCP4: 00000000
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1

Times and Times New Roman Do not display the same with ADE pdf reader

Anyone an idea why?
(These fonts display the same with MS word and Adobe Acrobate reader)

That looks like a grunged version of Times New Roman. You probably have this font installed, and it's likely conflicting with the standard Times New Roman font.

Daylight Savings Time and Time Zone Issue:

Similar Messages

Maybe you are looking for