Days instead of hours

Hi,
My Library shows 634 songs 34.6 days 2.34Gb, why would it say I have 34.6 dats of music?

While the time seems a bit off (one of my subsets is 3800 songs at 44.8 days), that is the default when your playlist/library goes over a day in length. You can click on it to change the format that is displayed.
When you look at the "Time" column, do you have a song that has an obnoxiously long time? It seems odd that 2.3 GB could last that long. Maybe one track has become funky?

Similar Messages

How to get the MTBR value in days instead of in hours

Dear Sir,
Please help me to get the MTBR value (T-Code MCJB) in the units of days instead of in the units of hours which is coming as default unit at present.
Looking for an early reply please.
THANKS AND REGARDS,
RN SABAT.

hi for this you need to change the formula in the std sap
as per sap's formula
suppose start date is 01.01
breakdown date is 10.01
downtime = 10 hrs
next break down date is 20.01
downtime is 5 hrs
mtbr =19 days X24 hrs-10/2
the above is how sap calculates
if 24 hrs is removed from the formula all the data will be in days
i hope iam right .
Edited by: Mohammed Iqbal on Apr 27, 2011 6:26 PM

Dunning interest calculation - taking 360 days instead of 365 days

Dear Friends,
I have done the dunning customization and forms are generating properly including the days in arrears. But for the dunning interest calculation, it is taking only 360 days instead of 365 days. Because of this, there is a difference in interest amount in dunning (F150 tcode) and interest calculation (FINT tcode).
Please guide me how to resolve this issue.
Thanks in advance for your help.
Regards,
Dwarak.

hi
check the below configuration.
spro-
interest calculations- global settings-
prepare item interest calculation/prepare balance interest calculations.
here you select calender type : G(365 days)
chandra

Why in iOS 6 (Calendar) it opens at the next day instead of today?

Why in iOS 6 (Calendar) it opens at the next day instead of today?

Nope... some of these are birthday all-day events created three years ago, or more. When I edit the events there is no time zone listed, but here is what I do notice:
When I view the "repeat" information for one of the problem events in iOS, it says "Custom." When I select that I see that it says "Yearly" instead of "Every Year." The events that do not have a problem are set to repeat "Every Year"
The two I just compared were created in 2008 (the one that works) and 2011 (the one that doesn't). I am guessing that I created one of these events using my iPhone, and the other using Google Calendar via a Web browser. I will try to create some test events using both devices to see if there is any difference.

HT201250 Is there a way to change the intervals at which Time Machine performs backups (e.g., weekly instead of hourly or daily) past 24 hours, daily for the past month, and weekly for everything older...

Is there a way to change the intervals at which Time Machine performs backups (e.g., weekly instead of hourly or daily) past 24 hours, daily for the past month, and weekly for everything older...

You can edit the interval in Console or install a Pref Pane
called TimeMachineScheduler (Leopard or higher) free from:
http://www.klieme.com/TimeMachineScheduler.html
Good luck, Tom

I bought a iphone 3gs 4 months ago had a problem with display service centre replaced me with the phone when i checked the settings of the phone in cellular usage under call time the lifetime usage was 3 days and 18 hours.what sholud be done ?

i bought a iphone 3gs 4 months ago had a problem with display service centre replaced me with the phone when i checked the settings of the phone in cellular usage under call time the lifetime usage was 3 days and 18 hours.what sholud be done ?

How is your iPhone's display different?
You can check the model number by going to Settings/General/About. These are the model numbers for the various 3 GS models;
MB715LL/A (16 GB Black), MB716LL/A (16 GB White), MB717LL/A (32 GB Black), MB718LL/A (32 GB White), MC555LL/A (8GB)

Set the broadcaster to email out on work days instead of daily

Hi Friends,
Any one can help me to set the BEX broadcaster to email out on work days instead of daily?
Regards
Vishwanath

Hi Viswa and Pravender
I have a similar issue here:
I'm working on BW3.5 module and I'm trying to scheule a report in BEX broadcaster with a predefined time. Eg: Every Wed day after Fisc quarter ends. I created a job with name TP_BROADCASTING_**** and included the ABAP program in step :RSRD_BROADCAST_FOR_TIMEPOINT.
Now In the start condition I selected start date as wed day after fisc qtr close and put the period value as every 3 months and restriction in cal Id as factory calendar.
Now I have two questions...How can I select just wed nesday after the fisc quarter close ? Is there a std SAP exit variable exist for this ? Or do I need to create one and write ABAP code in Exit ? I tried with Event and other ways but its not showing in scheduler...
Second one is I logged in to Broadcaster and created new setting for query and filled all recipents etc...now When I tried to schedule this I can not see my Quarterly pre defined time here...But if I change this time to some other calender time period I can see that in scheduler...
Is there any other way of scheduling the reports at a specific time period ?thanks inadvance
Sam

Calculating the depreciation pro days instead of periods

Hi All,
I've to calculate the depreciation pro days instead of periods.
Is it possble? How to do it?
Thanks
G.Rossi

Hi Rossi,
you have to make a transfer the values to a asset with a daily calculating depreciation key. You can not change the depreciation key from normal depreciation to daily depreciation on a asset which has already values.
If you are interested in technical details: If you create a asset ANLB-PERFY is set according to the depreciation key (T090NA-XDAILY). ANLB-PERFY can not be changed in the standard. If you change the depreciation key from normal depreciation to a daily calculating depreciation key (T090NA-XDAILY = initial to T090NA-XDAILY = X) you will get the AA 662.
regards Bernhard

MRP Shipment day instead requirement day

Good morning, we are implementing MRP and having problems with components since we have scheduling agreements for suppliers and already input the value of 5 days in planned delivery time in MRP2. But at the time or running MRP, the system is not considering this value for requirement of material. Do you know if Iu2019m missing something in order to let suppliers know about the shipment day instead of the requirement day at plant? Thanks!

Dear ,
Kindly compare both Info Record Set up and Material Master in terms of planned delivery time :
1.You maintain the non-vendor-specific planned delivery time in the material master (view "MRP 2"). You enter a vendor-specific planned delivery time in the purchasing info record or in the outline agreement. It is used in the planning run, if the indicator "Scheduling info record/agreement" in Customizing is maintained as a plant parameter (OPPQ) or MRP group parameter in 'external procurement' and if, in the area of automatic source determination, an individual vendor can be assigned.
If you set this indicator, the system checks whether a planned delivery time is entered in the purchasing info record or in the outline agreement. This planned delivery time is then used to calculate the delivery date and the release date.
2.In case of info record if you maintain the shed info record/agree in the configuration in plant parameters -OPPQ under the tab external procurement, then system will pick the time from Info Record Frist .Or elese it will take the Planned Delievery Time from Material Master .
Regards
JH
Edited by: Jiaul Haque on Feb 16, 2010 6:51 AM

Problem with all day events on iPad calendar spanning multiple days instead of one

I'm having an issue editing all day events on my iPad calendar. If I reschedule an event to the following day, it now spans the two days instead of just one.
The issue only happens on my iPad. I can reschedule appointments on my iPhone without any problems. Date and time zone are set correctly.

I experience the same when we subscribe on calendars (ICS) from Exchange. Been testing on two iPads 3 (6.0.1). The strange thing is that everything work as normal on my iPhone 4S (6.0.1). The timezone is correct and the all same on all three devices (default setting).
The meeting details (fetched live from Exchange) is also naturally the same. Far as I can see, this applies only the on iPads?
Example
https://webmail.frogn.kommune.no/owa/calendar/[email protected]/Råd_og_u tvalg/calendar.ics

HT3916 When I order a movie from Apple TV for $4.99 I get charged $14.99 and it stays for 30 days instead of 24 hours - how do I change that setting?

Hi - I just got my new Apple TV setup - when I order a movie for $4.99 - I get charged $14.99, and instead of only staying for 24 hours, it now stays for 30 days - how do I change the setting so i'm only getting an overnight movie rental instead of buying it for 30 days?

Welcome to the Apple Community.
It sounds as though you have purchased it to me, does it actually say anything about 30 days.
Rentals will stay available for 30 days, but if you start watching them the 24/48 hour timer starts counting down. This is the standard rental model, there is no alternative.

Need Days in 2010 instead of Hours

Rule X935 is giving error when Calling Time Units in variable Key
I got the solution When rule x935 was going to start its calling time units via XEINCH How to transfer that to WTUNT , Wage type units. Please let me know

Hi Priya,
In X935 go line 000050.
As you see VAKEYZEINH, VAKEY operation checks time unit. It controls *** and 001(means Hours).
Have a look table V_T538A. You will find 010 as days.
Make a copy of X935 and create your own PCR and change 001 to 010.
Regards,
Omid

I cal day and end hours in week view

I just installed Tiger and am having trouble getting the hours that I want (7 a.m. to 8 p.m.) to only show in my week view. I followed the iCal help and set it up under preferences, yet is shows the day starting and ending at midnight. Help?

Mark, welcome to the discussions. This feature of iCal is misleading - and not particularly useful. No matter what you set in the preferences there will still be 24 hours in the day, and all will be visible (though you can control how many are simultaneously displayed. Your 7am to 8pm setting controls which part of the display iCal lightly shade, and which part it leaves unshaded.

ICal in Day view doesn't show hours, but Days for the hours?

Ok, so I have been trying to figure this out but I cannot find the answer. In iCal, I cannot change the hour of a new event. It only allows me to change the min. So I went into the Day view to try and move the events to the correct hours and all it shows is Midnight, Saturday over and over (where the hours should be) and then Noon and then Saturday over and over again. I have no idea why it does this and have searched through the settings and cannot figure it out. Can anyone help me?
I have posted a screen shot of my problem at
http://public.me.com/dozierredraider
Thank you

DozierRedRaider,
Welcome to Apple Discussions.
First of all try refreshing the com.apple.iCal.plist file. You will find the com.apple.iCal.plist file in your Macintosh HD/Users/yourusername/Library/Preferences Folder. Quit iCal, drag the .plist file to your Desktop, log out/in or restart and check iCal for normal behavior.
If that is unsuccessful, open System Preferences...>Language & Text>Formats, and choose, or change the appropriate region. Then check/change the "Times" formats that you are using.
;~)

Configure 1 tape for 1 day instead of two NB6.5

Hi,
I'm using veritas netbackup 6.5 LTO3..
Previously I have 1 tape running per day(daily backup).. but suddenly it change to two tapes per day..
the question is:
1. how can I configure for the backup just to have one tape instead of two?
2. is there a way that I can configure the tape to be running in sequential order? lets say I have a barcode AAA111, AAA112, AAA113, AAA114
sometimes the backup will be running at AAA113 and AAA114 instead of AAA111 or 112.. how can I configure that it should be running in sequential order instead of random.
Thanks.
Edited by: flekzout on Jan 8, 2009 8:08 AM

Thanks for the detailed procedure, it helped a lot!

Days instead of hours

Similar Messages

Maybe you are looking for