Days missing from list view if no event entered in iCal
if i have no event entered on a particular day, the list view of iCal doesn't display the day. how can i still see the day in list view?
The List view reveals the day/days with an event scheduled only. If there isn't an event scheduled for a particular day, that day will not be shown when using List view.
The List view is a list of scheduled events only.
Similar Messages
-
Event Receiver to get folder Names from List View Web Part
Hi,
We have a requirement i.e.
On one of the page,there are some folders on the list view web part.
Now through event receiver i should pick the folder names from list view web part and
update the same in the list.
If that names already exists in the list then we should leave without updating,if not we have to add folder name in the list.
Please share your ideas regarding the same.
Regards,
Naga Sudheer M
Thanks & Regards, SudheerHello,
LVWP is just for displaying content of site so you need to associate your event receiver with actual list/library. You can create ItemAdded event receiver to check existing folder and create new if not existing. "sk2014" links are good to start.
http://sharepoint.stackexchange.com/questions/59788/change-name-in-itemadding-event-receiver-or-create-a-new-item
Let us know in case any doubt
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help -
IPhone 4 iOS 4.1 - Calendar App List View Not Showing Events Immediately
After upgrading to iOS 4.1, whenever I open the calendar in List view mode the events do not show up immediately. I have to navigate to the "Day" style or "Month" style before I can see any events. All the events are viewable normally in both the "Day" & "Month" style calendar but the "List" view.
I regularly sync my iPhone with iCal events and with Google calendar. I did delete and re-added the Google account but the problem persists.
Has anyone faced this problem? I will be doing a full restore again today. My wife's iPhone 3GS is working fine with the 4.1 build of 3GS.
Message was edited by: Raja RoyHello all,
I have the same issue with my iPhone 3G under iOs 4.1 (8B117) with one local calendar and three Google calendars. The first time the Calendar application is loaded, if it opens in "List" view, no events are displayed. Switching to another view is enough to get the items back. In "Day" and "Month" views, the events eventually appear after some time (~5 to 10 seconds).
My boyfriend has the same problem on his iPhone 4 under iOS 4.1 (less annoying because of multi-tasking).
Hopefully this will be fixed in iOS 4.2... :-S
Regards,
HAL1 -
List View in the event browser stopped working.
Recently I was using Final Cut pro X when it crashed, when I re-opened the application I found that List View in my event browser no longer displayed any content, filmstrip view appears to work but I had gotten quite fond of list view.
Is there a way to get it running again? I've already tried Restarting, shutting down and booting up again, taking out my external hard disk before opening FCPX then putting it back in again..We have the same FCP X issue. Filmstrip view works, switch to List view and it shows nothing. We even tried closing in List view, then reopening, it reopens in Filmstrip. We have rebooted as well, with no effect. Anyone find a work around?
-
Column name missing from a View
I tried to create a view based on another view but the column header is missing from the view.
The view was create with the following statement:
create view TEST.MDQ_VU_TEST2 (FXT_BANKCODE, FXT_FCY, FXT_FXINDICATOR, SUMFXT_FXFCYAMT, SUMFXT_FXLCYAMT, CASESTMT) as
SELECT MDQ_VU_POS.FXT_BANKCODE,
MDQ_VU_POS.FXT_FCY,
MDQ_VU_POS.FXT_FXINDICATOR,
MDQ_VU_POS.SUMFXT_FXFCYAMT,
MDQ_VU_POS.SUMFXT_FXLCYAMT,
ROUND( CASE WHEN (MDQ_VU_POS.CCY_BASE_CURRENCY = '1')
THEN CASE WHEN (MDQ_VU_POS.SUMFXT_FXFCYAMT = 0)
THEN MDQ_VU_POS.SUMFXT_FXFCYAMT
ELSE MDQ_VU_POS.SUMFXT_FXLCYAMT / MDQ_VU_POS.SUMFXT_FXFCYAMT
END
WHEN (MDQ_VU_POS.CCY_BASE_CURRENCY <> '1')
THEN CASE WHEN (MDQ_VU_POS.SUMFXT_FXLCYAMT = 0)
THEN MDQ_VU_POS.SUMFXT_FXLCYAMT
ELSE MDQ_VU_POS.SUMFXT_FXFCYAMT / MDQ_VU_POS.SUMFXT_FXLCYAMT
END
ELSE 0
END, MDQ_VU_POS.CCY_FXDECIMAL_PLACES) CASESTMT
FROM TEST.MDQ_VU_POS;The view is created successfully, but the last column name does not appear as show below
View TEST.MDQ_VU_TEST2:
Columns:
FXT_BANKCODE VARCHAR2 (12) INLINE NOT NULL
FXT_FCY VARCHAR2 (3) INLINE NOT NULL
FXT_FXINDICATOR VARCHAR2 (1) INLINE NOT NULL
SUMFXT_FXFCYAMT NUMBER NOT NULL
SUMFXT_FXLCYAMT NUMBER NOT NULL
NUMBER NOT NULLAnyone knows why TimesTen unable to get the alias name for that particular column ?
Thanks is advance.
Regards,
GaryThanks Gary - I tried it on 11.2.2.2.0 64bit on Linux x86/64 but it again succeeded for me. That's probably due to my mocked up base table versus your real world definition.
Would you be able to open an SR so we can investigate this properly? We'd need:
ttCapture off the instance (so we get the correct DSN definition)
base table and indexes SQL definition - a ttSchema taken off the datastore would suffice.
Thanks. -
How do I remove the tempature readings on my calendar? They fill up each day crowding out the view of scheduled events for the most part.
Thank you
TerryDisable or remoce the Calendar, that is creating these events, Terry.
To find out, which calendar is creating these events, ctrl-click on one of the events and select "Get Info".
In the Info panel click the color icon in the upper right corner to find out the calendar, that created this event.
Then reveal the "Calendars" Sidebar (press the "Calendars" button in the toolbar) and select the Calendar, ctrl-click it and delete the calendar or disable it.
-- Léonie -
All day events in iCal on 3Gs w/ iOS 4.0.2 show up day early in List view
For some reasons, all day events on my Calendar (iCal synced via MobileMe) are showing up a day earlier on my iPhone, but only when I use List view. They appear fine when I use iCal on my MBP or iMac. This happens with all day events on my calendars and subscribed calendars (e.g., birthdays).
If I tap on an event in the Day or Month view, the correct date is listed. If I tap on it in the List view, the day before is listed as the date.
What in the heck is going wrong here?I am having the same problem. I have tried different scenarios and it looks like its an issue with syncing from MobileMe. I thought I had it beat when I saw my preferences for in iCal were set to to start at 8AM and end at 6PM. I made it Midnight to Midnight but that did not fix it.
I am perplexed - has to be a bug!
Message was edited by: RaoulDuke -
APEX 4.2.3 Bug: Cascading Style Sheets cannot edit from list view
APEX Builder page 4000:37
List view shows name, notes and download columns. The name column should link through to CSS Edit page (39), but instead downloads the file.
Workaround: Switch to the icon view, and click on the icon which takes you to the CSS edit page.
Can the APEX team correct this, as switching to icon view is not intuitive.
Regards
MarkHi,
Austin, after reminding me what I knew - That it was an issue with the application - I had a further think, and thought maybe that it is something to do with the settings of the application.
It turns out that it was a globalization setting.
I had to go to Shared Components > Globalization Attributes, and change the Application Primary Language from "English (Australia) (en-au)" to "English (US) (en-us)".
This fixed the problem and now I can view the data from the Oracle Financials Views.
Thanks for assisting - this had me going for days.
Amanda. -
Files access report from List View Web Part
Hi,
I have a list,inside the list there are some folders and inside the folders there are some files.
This list has been added to the aspx page as a list view web part.
Now our requirement is to generate report on monthly basis of logged in user who accessed folders/files from the webpart.
Is this possible through OOB/customisation please let me know.
Regards,
Sudheer
Thanks & Regards, SudheerHi,
Did you check this link? If not please refer it. They are talking exactly what do you want in your requirement.
http://office.microsoft.com/en-in/sharepoint-server-help/view-audit-log-reports-HA102039795.aspx
Sekar - Our life is short, so help others to grow
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer -
Text missing from vertical view- Ibooks Author product
I made a book in ibooks author. In the horizontal view, it looks perfect. In the vertical view, large chunks of text are missing from the book semi at-random. If I attempt to insert the missing chunks of text into the vertical view, then when I switch back over to the horizontal view, I just get repetition where the text shows up twice. That means it is impossible to make the book look good both horizontally & vertically. Any idea how to solve?
Remember, layout in landscape and edit content in portrait.
Check in both.
If you like, you can disable Portrait in the Inspector.
For details on working w/iBA, see the built in Help and
Publishing With iBooks Author
http://shop.oreilly.com/product/0636920025597.do -
Still no way to remove stripes from list view finder windows?
Is there really still no way to do get rid of these horrible stripes in list view finder windows? After all the complaints about them? Or has anyone found a way? (Or has apple granted one in one of the last updates?)
esa ceduti wrote:
What is green bar paper?
moin, moin from hamburg
JGG -
Suddenly Genres column disappeared from List view
Hi guys,
I'm still running 8.0.2, and I can't figured out what happened; Genres column is disappeared from the list view and I couldn't find anyway to show it again.
I also tried to reinstall iTunes 8.0.2, but nothing changed.
Anyone know how to solve the problem?
Thanks!Ok, just to make sure that I understand. In the list view in iTunes 8.0.2, you see artist & album column. In iTunes, just as the list starts it indicates what is listed in a gray bar. Right click on the bar & a menu should appear. From that list choose what you want to have displayed. The genera should be one of those options.
If you are still experiencing issues at that point try the following article on Apple's support page:
http://support.apple.com/kb/HT1224
This will show you how to properly remove iTunes from your computer. After trying all of that with out any luck, call the support number & I know that an agent will be happy to help! -
Agentry: Edit Property from List View when scanning
Hallo,
i have a detail screen with a list view. The List View shows a collection with orders. The order properties are orderNumber, orderStatus and some other details. In the List View i create a single match action for the list view scanner. The property column orderNumber is set to scanner can filter on this column. So if i scan a orderNumber from the List View my match action starts.
In the action i want to set the orderStatus from the matched order to a new status. Example: i scan the order with orderNumber 001 and his orderStatus is "new". Then the orderStatus should set to "in process".
I try to create a SubActionStep for the single match action that have a transaction step and a apply step. In the transaction step i want set the orderStatus object. But i don't know how i can set a new value to the orderStatus property.
Please help me with this.
André
PS: my TransactionStep:
and my transaction:André,
In your transaction you will need to also have a property that maps to the Object -> OrderStatus property. For the initial value of the property you will select Rule - Before Data Entry and then create your rule to return what the status should be set to when the transaction runs.
Then when you Apply the transaction in your Scan Match action the value will be updated on the client. If you also want to update the status in the Backend system you will also need an Update rule as Emanuel mentions to change the status of the Order in the backend system.
Hope this helps!
--Bill -
Sub-Folder View Icons Missing in List View (Finder)
Since upgrading to Lion, the arrows in Finder for viewing sub folders has disappeared from Finder in list view and cover flow. At first, I just figured it was another nice feature of OS X they decided to kill off, but I was looking at my boyfriend's computer, and his still has the triangle icons, and he's using Lion.
I've tried a few things to try to fix it, but nothing seems to help. Using the Command + right arrow key combination causes some weird glitch folders to appear below the folder I'm trying to view the contents of. The names of those folders is always stuff like "Folders", "Applications", "PDF Documents", among others. Here's a screenshot of my Finder view, and those odd folders:
Does anyone know how to fix these issues? Thank you for any replies. =)Wow, Woolgatherer was right on on this one! What was bugging me, besides not having the up/down sort arrow buttons in the columns, was I was backwards on the arrangement. In essence, when I had the arrangement in "Kind," the items were from "z to a" instead of "a to z." The arrangement view is nice to look at, because it separates the types of items into groups, but you can not reverse the order quickly.
If you do as Woolgatherer says, and turn off the "Arrange by" to none, and then the folders display the up/down arrows to go in alphabetical order from top to bottom or bottom to top. Once you toggle the header arrow, then you can actually go back to "Arrange by" to "Kind," and it is in the opposite order. What I mean by this, if you sort from the header "a to z" and then go to the Arrange by "Kind," it is now in the order of "z to a." This is very weird. -
Trigger round trip in parent view from called view on close event
Hi Experts,
We have a requirement in which from my view.htm page on click of a button (using onclientclick) I am opening another view using window.open of javascript.
Now in pop-up after processing it, i am using self.close to close the pop-up, before this point I am setting collection of calling page in on_request method of pop-up page controller class, but it does not reflect after pop-up has closed. though it reflects on any round-trip on the calling page.
How do I trigger round trip from pop-up after Self.Close from htm page?? Or from do_request method?
I am trying to use opener.location.reload, but use of opener gives permission denied javascript error.
Please help, I am really stuck here.
Thanks,
Rohit
Edited by: Rohit Khetarpal on Mar 25, 2010 1:29 PMStill no replies no one using BSP now a days?
I have one more doubt, in addition to above, I am coding in IC Web 5.0 application (CRM_IC), one of the z-views i created in z-bsp application (Z_WW_CRM_IC), where i have input field using CRMIC bsp tag in Search View.
Now, I am opening another view in Pop-up using Onclientclick of button (as mentioned in above post too), but in the view URL, i need to send values that are entered in the search view, how can i do that.
I have tried in javascript, var val = <%= <contextnode>->get_country( attribute_path = 'country') %>;
but it doesn't work, it works only if there already has been a server round trip!
Any help is highly appreciated.
Thanks,
Rohit
Maybe you are looking for
-
I want to restore my iPhone to the backup that I did just before upgrading to iOS6. When I try to pull up old backups, I only see one from this morning and an old one from May 2012 when I still had my iPhone 3GS. I have not been using iCloud since
-
Oracle 10G DBA OCP - for whom has Oracle 7 OCP
I am Oracle 7 certified and plan to have Oracle 10G certified by taking 1Z0-042 (dba 1) and 1Z0-043 (dba2 and workshop). 1. I remember I have taken SQL and PL/SQL when I was certified Oracle 7. Do I still need to one of the 1Z0-001 Introduction to Or
-
How to internationalize images, css, js in JSF?
Hi All, Just came to my mind and haven't think of it thoroughly but any better ideas how to internationalize the images, css, or js? For example: 1. when the user's Locale is en, it will loads logo_en.jpg 2. when the user's Locale is ja, it will load
-
Hi, I have a class: com/easypaygroup/UDF/employee/EmployeeUDF.java in directory: C:\dvl.home\env\jboss-4.0.3SP1\server\default\tmp\deploy\tmp43432easyweb-exp.war\WEB-INF\classes Now I want to compile my class with javac but i get the error error: can
-
Hi, When I run a SPARQL query with OPTIONAL in the WHERE clause, I saw a lot of "select 1 from ***" kind of queries got executed. The query runs very slow. I'm running Jena adaptor 2 against Oracle 11.1.0.6. We have about half million triples in the