Dazzle DVC 170 Platinum

Well I am trying to broadcast this web show but I need to use
Adobe Flash Media Encoder and it says the capture card isn't
compatible so im not sure what to do about this problem. Any
help?

Ideally any capture card capable of giving the raw stream as
output and having Direct Show drivers should work with FME. You can
also have a look at the list of devices which are certified by FME
http://www.adobe.com/support/documentation/en/flashmediaencoder/FME_DeviceMatrix.pdf

Similar Messages

Dazzle dvc 150 & dazzle dvc 170

hey i was wondering if the dazzle dvc 150 is mac compatible. or if dazzle dvc 170 will work on a mac.

No. The Dazzle gear hasn't been particularly useful on Macs. Not worth the $, £, or € they charge.
What are you trying to do that you need a converter for?

Dazzle Video Creator Platinum HD for Mac

I have just purchased Dazzle Video Creator Platinum HD after being advised to get it by a staff member at an Apple shop. When it was delivered it states on the pack it is only compatible with Windows 7, Windows Vista and Windows XP. I don't have parallels on my mac and was hoping I could load dazzle without purchasing parallels and windows. I dont want to unpack Dazzle and try as I may not get a refund. Can you advise if Dazzle is compatible with Mac OSX 10.6.3 and if not what I should do to be able to use Dazzle on my MAC?
Thanks

Well, your MacBook Pro should have iMovie already installed, and that along with an analog to digital convertor is all you really need.
If you get yourself a Digital8 camcorder (I have a Sony one) you can connect the "iLink port" to your MacBook Pro with a FireWire cable, and then iMove can connect to the camera and even control the tape playback/pause options. I have done this myself a few times. When I first started converting some old "out of print" VHS tapes to DVD for my wife's classes many years ago, I purchased the Pinnacle MovieBox DV which was my analog-to-digital convertor. In fact, this old box still works today other than it only works in SD (no HD here). The Movie Box DV that I have is hard to find now, and it is no longer officially supported, but they are very solidly built and seem to last forever if you can get one. I had to go the route of the external hardware for convertign the old VHS tapes due their having MacroVision encoding on them, and the hardware I bought will ignore that.

Dazzle dvc 90 on mac

Hello there. I have a Dazzle DVC 90 usb 2.0 video capture device. I know it works on PC because I have used it on a PC, but will it work if I plug it into my mac? I really would like to use it on my mac. Is there a good video capture device that would be a better choice for my mac? Any advice would be appreciated. Thanks

Hi,
I have a Dazzle DVC 150 which unfortunately only works for Windows. I looked for Mac driver but they son't seem to exist. So I guess that is the same for your DVC 90.
A good choice for the Mac is the EyeTV product suite from Elgato (www.elgato.com). Perhaps the cheap EyeTV EZ is a good choice for you. I bought the more expensive EyeTV 200 and am very happy with it
Peter

Video capture - Dazzle DVC 120

Hi. I'm a new Mac Mini owner after years of using Windows and Linux. I sold my Win XP laptop and jumped in head first. Like many before me, I'm both impressed with what I'm finding and also having a hard time with some aspects of converting.
One problem right now is my teenage son reading me the riot act because he doesn't have my laptop anymore to capture video using his Dazzle DVC 120. I got the Mac Mini thinking it would be small enough to put in the other room once in awhile when he wanted to do this.
The Mac is tied into the TV and works fine using the Apple SVideo adapter, but so far we cannot figure out how to get OS X to recognize the Dazzle. Can this device work under OS X and what simple (read free/cheap) app can he use to capture? I thought maybe the iMovie HD might do this?
Is my first problem just finding a driver?
Thanks!

Mark--
It's probably a question best answered by the manufacturer itself (Pinnacle Systems), but it looks like it's Windows-only. What possible reasons they might have for keeping it that way, who knows. Most peripherals nowadays (printers, cameras, disk drives, etc.) are platform-indifferent; a few still are not. However, there are other video recorders/converters that are Mac-compatible. One very good one is EyeTV by El Gato:
http://www.elgato.com/index.php?file=products_eyetvmain&PHPSESSID=61fea74ad841cb b0a7fbf15469c2847a
Another is the ADVC110 by Canopus:
http://www.canopus.us/US/products/ADVC110/pm_advc110.asp
I'm sure having to buy a new video converter wasn't part of your plan, but it may have to come to that.
--Kevin

L would like to capture VHS using an old Dazzle DVC 100 (analog to USB) to HD & DVD

Is this possible? Can I just use Adobe to capture or do I need different software or hardware? This is for family home videos. Thank you

First, Version 13 no longer captures from a tape camera
http://helpx.adobe.com/premiere-elements/kb/removed-features-formats-elements.html
USB is not supported... If you have version 12 or earlier, read below
Use a TI chip for adding a firewire card http://forums.adobe.com/thread/940242
And a device such as http://www.grassvalley.com/products/converters

How to configure USB camera if it is not Directshow image

Hi,
I am using NI-IMAQ for USB to grab videos from Dazzle DVC170 of Pinnacle. There is an error showing system error, see the attached file. Someone answered that it is because my USB device is not a directshow image one. In fact, Dazzle DVC 170 connects camcorders with computer. There is Svideo output connecting camcorder and a USB connecting computer. If in this case, VISA can be used to configure USB and grab video? Thanks.
Solved!
Go to Solution.
Attachments:
error2.JPG ‏100 KB

Hi,
For firewire connection, there is no connection on my camcorder but S video output connection. I am wondering if we can buy a firewire card to transport video and use IMAQ for USB to control this firewire or other IMAQ module to control it. In fact, I went to Bestbuy to ask about this. But the sales person told me that the firewire card can only transport video but can not be controled. I am wondering the problem with firewire card is there is no driver for this so we can not control it. Is it right?
Thanks.

Adobe Flash Media Live Encoder 3 and Dazzle 170

Hi, I have a trouble.
I'm working with: Vista Home Premium 32 Bit, Dazzle DVC 179 Rev.1.2, PCLEUSB2, Adobe Flash Media Live Encoder 3. I work with Firewire 1394 with Sony Pd100 Camcorder, and and Encoder 3 sounds well (PAL), with USB cam Encoder 3 sounds well (PAL), when I choice Dazzle from the menù, Encoder 3 tell to me: VIDEO FORMAT NOT SUPPORTED - Video format provided by video capture device is not supported by this application. (PAL or NTSC or SECAM).
What can I do for work with this device?
Thanks in advance
Vittorio

FMLE will work with all devices which have direct show based drivers and give data in raw format. Here is a list of devices which have been tested and certified with FMLE - http://www.adobe.com/support/documentation/en/flashmediaencoder/FMLE_DeviceMatrix3.0.pdf

Dazzle Support

Alright, so I have a few things to ask about.
First of all, I'm using a Samsung 1080p HDTV Monitor, and it only has one component output, being used by my Xbox 360. It has 2 HDMI outputs, one being used by HD-DVR Comcast box, and one empty.
Now, what I want to do, is use the Dazzle Platinum DVC 170 to record my Xbox 360 gameplay. However, it uses component [red, white and yellow]. I was wondering if there's something I can [that's also cheap, but good quality] that converts Red, White, and Yellow into an HDMI input, and naturally, how much that would cost.
Onto my second problem. Currently, when I try downloading the software for Pinnacle Studio, from the discs provided with the capture card, it says 'there are known compatibility issues with this product' and suggests I go to the website. If I ignore, it will not install successfully. I go to the Pinnacle website, look for patches, and it doesn't support x64 versions of Windows Vista, only x32. [which is really stupid] So, is there anything I can do to solve this problem? Or do I have to find a copy of XP/dual-boot Linux?
Any help is greatly appreciated.
Have a nice day
-Kyaizen
Solved!
Go to Solution.

Could you perhaps provide me with a link or give me more information on where to get such a cable? If it's not aloud here, @Kyaizen me on Twitter. It would be greatly appreciated.
On the other hand, they've been saying this since I bought the piece of garbage in 2007. I don't have the money to upgrade to W7 [since I think the pre-order deal has gone away =\] and Pinnacle itself is a terrible company... Gah.. Guess I'll just have to try and get a different capture card. Waste of $120! I don't recommend the Pinnacle Dazzle Platinum anyone!

Dazzle Record with Fios

I'm Recording my TV with my Dazzle DVC 100 and the video comes up and everything but there is no sound....
Do I need splitters? if so can you tell me which one
Thanks in advance

hi, I ended up looking up what the Dazzle DVC 100 is, and it looks like it needs at least two audio cables for sound (both red and white) and then that is converted to audio to your PC with a USB conversion.
So you just need the red and white cables from the set top box (or device you are recording) and make sure that they are firmly plugged in at both ends (one end being the set top box, the other end being the Dazzle DVC 100)
From there, you are fine, but if you are not getting sound, then you are going to have to play with the settings on the PC for the dazzle, maybe even reload the drivers. As long as you are physically hooked up right, then it becomes a software issue with the sound. Dazzle support might be better able to tell you what tricks of the trade there are, with regards to sound

My dazzle drivers won't install

I have a Dazzle DVC 100 and it plugs in and the laptop (HP Pavillion TouchSmart, Windows 8) scans it fine. However when i try and update the drivers it won't install even though i have the right drivers downloaded! When i try to install the drivers by
their wizards it comes up with an error screen that says that the install was interupted. Please help!

Hi,
What is the detailed error message? And anything valuable recorded in the event?
You can first try:
Temporarily turn off security software.
Re-download the driver, install again.
If fail again, Install the driver in safe mode:
Start your computer in safe mode
http://windows.microsoft.com/en-in/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7
And just as ZigZag3143x said, it is also recommended to contact pinnacle support.
http://corel.force.com/pinnacle?lang=en
NOTE
This response contains a reference to a third party World Wide Web site. Microsoft is providing
this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
Regards,
Yolanda
Yolanda
TechNet Community Support

FME and dazzle

I just bought the dazzle dvc 100 series [dazzle dvd recorder] Im attempting to get the audio from the dazzled but there is no source on the drop down menu.
I'm on vista home premium with sp1
Which should be working!
I tried the capture card on xp and behold the drop down menu it appeared. Is there any work around? Or no?
Thanks
And yes I installed the software that came with it.

Same problem.....except I tried it on both Vista and XP. Although the audio device shows on XP, I'm still getting no audio. Talked to Dazzle (Avid) and they told me that it is a program-specific device and is not made to work with other software. I'm not sure if this is final or if there is another way around it with having to spend $150 on a PCI capture card.

Dvc 100

I was wondering if anyone has successfully got pinnacle dazzle dvc 100 running within arch linux, as far as I can tell my dev file for this is /dev/video1 since /dev/video0 is for my webcam. I tried running vlc capture mode both in webcam and also tv-analog and nothing seems to bring any kind of video

Same problem. Or worse. I don't even get /dev/video1. It only shows the audio in alsamixer. No video in sight.
I hope someone can help.

Possible to install fire wire card on Envy j157cl laptop

I have a HP Envy 17 j157cl laptop that I plan to use as adedicated video editing platform. The only problem is that it doesnot have an I.link (hot wire) connector, only usb connectors. I have found a cable with USB terminal at one end and fire wire at the other. will this work? On the other hand, is there a fire wire board (card) than can be installed in the Envy 17?. The clips that I need to process now are in tape and can only be transferd to the computer via a vidio8 SOny vIdeocamera model DCR-TRV 520.

No laptops now just have no internal slots for expansion. There used to be a product called a Dazzle Video studio. I looked around for it but it seems to be out of production. It connected via usb but had S-Video component video, and firewire video input. It is a fairly big thing that looks a bit like a docking station. Have you tried the usb to firewire cable? Some people say those work other say they do not. I never tried one. I actually keep an old laptop with firewire around just for video capture from my older DV camera. Does your video camera also have an RCA or S-video output port? If so you can use this:
http://www.ebay.com/itm/PINNACLE-DAZZLE-DVC100-DVC-100-PLATINUM-Video-Capture-STUDIO-15-HD-PC-USB-NE...

Video capture device Plextor PX-AV200U doesn't work

Hello there.
This is the last piece of HW that I still didn't manage to work with linux. I bought it few years ago, when I used windows and I'm trying to make it work since I started to use linux 3 years ago.
My dmesg output is:
usb 1-10: new high speed USB device using ehci_hcd and address 10
em28xx: New device USB 2821 Device @ 480 Mbps (eb1a:2821, interface 0, class 0)
em28xx #0: chip ID is em2820 (or em2710)
em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 21 28 90 00 11 03 6a 22 00 00
em28xx #0: i2c eeprom 10: 00 00 04 57 06 21 01 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 20: 02 00 01 01 f0 10 00 00 00 00 00 00 5b 00 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 01 03 01 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00
em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 32 00 31 00 20 00 44 00
em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x37da7b8a
em28xx #0: EEPROM info:
em28xx #0: AC97 audio (5 sample rates)
em28xx #0: 500mA max power
em28xx #0: Table at 0x04, strings=0x226a, 0x0000, 0x0000
em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1)
em28xx #0: found i2c device @ 0x4a [saa7113h]
em28xx #0: found i2c device @ 0xa0 [eeprom]
em28xx #0: Your board has no unique USB ID and thus need a hint to be detected.
em28xx #0: You may try to use card=<n> insmod option to workaround that.
em28xx #0: Please send an email with this log to:
em28xx #0: V4L Mailing List <[email protected]>
em28xx #0: Board eeprom hash is 0x37da7b8a
em28xx #0: Board i2c devicelist hash is 0x6ba50080
em28xx #0: Here is a list of valid choices for the card=<n> insmod option:
em28xx #0: card=0 -> Unknown EM2800 video grabber
em28xx #0: card=1 -> Unknown EM2750/28xx video grabber
em28xx #0: card=2 -> Terratec Cinergy 250 USB
em28xx #0: card=3 -> Pinnacle PCTV USB 2
em28xx #0: card=4 -> Hauppauge WinTV USB 2
em28xx #0: card=5 -> MSI VOX USB 2.0
em28xx #0: card=6 -> Terratec Cinergy 200 USB
em28xx #0: card=7 -> Leadtek Winfast USB II
em28xx #0: card=8 -> Kworld USB2800
em28xx #0: card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2
em28xx #0: card=10 -> Hauppauge WinTV HVR 900
em28xx #0: card=11 -> Terratec Hybrid XS
em28xx #0: card=12 -> Kworld PVR TV 2800 RF
em28xx #0: card=13 -> Terratec Prodigy XS
em28xx #0: card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0
em28xx #0: card=15 -> V-Gear PocketTV
em28xx #0: card=16 -> Hauppauge WinTV HVR 950
em28xx #0: card=17 -> Pinnacle PCTV HD Pro Stick
em28xx #0: card=18 -> Hauppauge WinTV HVR 900 (R2)
em28xx #0: card=19 -> EM2860/SAA711X Reference Design
em28xx #0: card=20 -> AMD ATI TV Wonder HD 600
em28xx #0: card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder
em28xx #0: card=22 -> EM2710/EM2750/EM2751 webcam grabber
em28xx #0: card=23 -> Huaqi DLCW-130
em28xx #0: card=24 -> D-Link DUB-T210 TV Tuner
em28xx #0: card=25 -> Gadmei UTV310
em28xx #0: card=26 -> Hercules Smart TV USB 2.0
em28xx #0: card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME)
em28xx #0: card=28 -> Leadtek Winfast USB II Deluxe
em28xx #0: card=29 -> EM2860/TVP5150 Reference Design
em28xx #0: card=30 -> Videology 20K14XUSB USB2.0
em28xx #0: card=31 -> Usbgear VD204v9
em28xx #0: card=32 -> Supercomp USB 2.0 TV
em28xx #0: card=33 -> (null)
em28xx #0: card=34 -> Terratec Cinergy A Hybrid XS
em28xx #0: card=35 -> Typhoon DVD Maker
em28xx #0: card=36 -> NetGMBH Cam
em28xx #0: card=37 -> Gadmei UTV330
em28xx #0: card=38 -> Yakumo MovieMixer
em28xx #0: card=39 -> KWorld PVRTV 300U
em28xx #0: card=40 -> Plextor ConvertX PX-TV100U
em28xx #0: card=41 -> Kworld 350 U DVB-T
em28xx #0: card=42 -> Kworld 355 U DVB-T
em28xx #0: card=43 -> Terratec Cinergy T XS
em28xx #0: card=44 -> Terratec Cinergy T XS (MT2060)
em28xx #0: card=45 -> Pinnacle PCTV DVB-T
em28xx #0: card=46 -> Compro, VideoMate U3
em28xx #0: card=47 -> KWorld DVB-T 305U
em28xx #0: card=48 -> KWorld DVB-T 310U
em28xx #0: card=49 -> MSI DigiVox A/D
em28xx #0: card=50 -> MSI DigiVox A/D II
em28xx #0: card=51 -> Terratec Hybrid XS Secam
em28xx #0: card=52 -> DNT DA2 Hybrid
em28xx #0: card=53 -> Pinnacle Hybrid Pro
em28xx #0: card=54 -> Kworld VS-DVB-T 323UR
em28xx #0: card=55 -> Terratec Hybrid XS (em2882)
em28xx #0: card=56 -> Pinnacle Hybrid Pro (2)
em28xx #0: card=57 -> Kworld PlusTV HD Hybrid 330
em28xx #0: card=58 -> Compro VideoMate ForYou/Stereo
em28xx #0: card=59 -> (null)
em28xx #0: card=60 -> Hauppauge WinTV HVR 850
em28xx #0: card=61 -> Pixelview PlayTV Box 4 USB 2.0
em28xx #0: card=62 -> Gadmei TVR200
em28xx #0: card=63 -> Kaiomy TVnPC U2
em28xx #0: card=64 -> Easy Cap Capture DC-60
em28xx #0: card=65 -> IO-DATA GV-MVP/SZ
em28xx #0: card=66 -> Empire dual TV
em28xx #0: card=67 -> Terratec Grabby
em28xx #0: card=68 -> Terratec AV350
em28xx #0: card=69 -> KWorld ATSC 315U HDTV TV Box
em28xx #0: card=70 -> Evga inDtube
em28xx #0: card=71 -> Silvercrest Webcam 1.3mpix
em28xx #0: card=72 -> Gadmei UTV330+
em28xx #0: card=73 -> Reddo DVB-C USB TV Box
em28xx #0: card=74 -> Actionmaster/LinXcel/Digitus VC211A
em28xx #0: card=75 -> Dikom DK300
em28xx #0: card=76 -> KWorld PlusTV 340U or UB435-Q (ATSC)
em28xx #0: Config register raw data: 0x90
em28xx #0: AC97 vendor ID = 0xffffffff
em28xx #0: AC97 features = 0x6a90
em28xx #0: Empia 202 AC97 audio processor detected
em28xx #0: v4l2 driver version 0.1.2
em28xx #0: V4L2 video device registered as video1
em28xx audio device (eb1a:2821): interface 1, class 1
Can't get any output, not even audio.
I tried to find threads about similar eb1a:2821 cards, but none of those helped me.
The only possible solution I found is patch, which also didn't help me yet, since I didn't manage to successfully apply it (well, I'm still bit newbie in such operations :-X).
I use kernel-2.6.36-ARCH.
Could anybody help me with this delicious problem?
Regars,
Michal

Hi @PatDenis! Welcome to the BlackBerry Support Community Forums!
Unfortunately, you need more memory to perform that task, you need a media card to be able to start recording a video. By the way, the 9720 is not a Bold (according to your profile), It's just BlackBerry 9720. Cheers!
Record a video
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

Dazzle DVC 170 Platinum

Similar Messages

Maybe you are looking for