DB 12c Connection directly to a PDB from frameworks

Hi,
I already install 12c and I have configured my CDB and PDB correctly. I also created a local user in the PDB.
I can connect to the CDB but I need to connect directly to the PDB from php and adf using the local user.
So, the question is:
What is the procedure to config the listener to connect directly to the PDB as a non-CDB?
I have several apps in different application frameworks working with 11g and I need to use my PDB as 11g DB.
thnaks,
Jhon
DB 12c

Jhon,
I commonly do it using the LOCAL_LISTENER parameter which points to the Oracle database listener. the database then autoregisters at the listener with its database name and you can connect to it.
If you need more details, I would like to ask you to post your question in the generic database forum as we here commonly discuss issues how to connect from an Oracle database to a foreign database.
- Klaus

Similar Messages

What is the direct connect method for transfering photos from my macbook pro to my iphone without using iTunes syncronization? (iow: a simple photo copy from mac to iphone?)

I feel like I should know the answer to this. I can't believe it is a hard question.
What is the direct connect method for transfering photos from my macbook pro to my iphone without using iTunes syncronization? (iow: a simple photo copy from mac to iphone?)
Easy? Right?
Just plug my iphone in to a mac and copy a photo from the mac to my iphone.
I don't have internet access - I can't email it, or mobileme it, or dropbox it.

iTunes. Other than that there is no direct method. However, do try the iPhone forums.

I cannot get Mavericks to download, even when connected directly through ethernet. Anybody know why? I am running OS Lion, the most recent version and my Mac ws from late 2011

I asked this question before, and was told to connect directly to the internet via ethernet, rather than attempting to download wirelessly. Three times I have attempted the download, and the most I get is a small blue dot on the launchpad icon. I click on the Mac store and while it says "Downloading" nothing seems to be happening. All apps are updated and closed and yet...nothing.
I am really frustrated with this whole thing! I am wondering, is Mavericks really worth all this hassle as an upgrade from Lion? And of course, you cannot get help from Apple without paying $20 unless Mavericks downloaded successfully and you are just having trouble.
If anyone out there can help me with potential problems I can remedy myself, I would greatly appreciate it. Thank you in advance!

The download speed all depends on the speed of your internet connection. Mavericks is a 5+ GB download and it will take a while even with a fairly fast internet connection.
The progress bar will barely move in the first few minute and it may take several hours to complete. If the App store is saying it is downloading then I would think it is downloading. Just let it run and set you mac not to go to sleep.

Do thumbnails show in Bridge CS5 if connected directly from a DSLR (via USB cable)?

I have a D90 and none of my thumbnails for my files show in Bridge CS5 when connected directly from the camera. This includes ALL types of files (JPEG, NEF, etc). It shows the thumbnails when I use a card reader though. Is this common with DSLRs?

If you have—misguidedly and unfortunately—done that already, first back up the image files on your computer, then immediately format the card in the camera, which will erase everything in the card and format it to a fresh, pristine state.
What ever possessed you to do a thing like that?
Had you done that to the card containing the raw files you can't open?
Do not be fooled by what the camera shows you anyway. The preview you see in the back of the camera when chimping* is not a preview of your raw file at all, but of the embedded JPEG that the camera creates right after you shoot and records inside your raw file. The histogram it shows you in the camera is not based on the raw data at all either, but on said embedded JPEG.
The same is true when you review or playback the images later on the LCD display in the back of the camera.
*Chimping is a colloquial term used in digital photography to describe the habit of checking every photo on the camera display (LCD) immediately after capture.
The phrase is most likely derived from comparison between the sounds and actions some make while reviewing images and those of an excited primate (Oooh! Oooh! Aaah!), or when a photographer is completely absorbed in the act of analyzing, admiring or proudly displaying a shot to others.
From: http://en.wikipedia.org/wiki/Chimping
Oy!

Connecting directly from my modem to XBOX 360 Live Please Help me.

Please help me I keep getting the message on my Xbox live that I can connect but that I have moderate nat. You see I play Final Fantasy online using Xbox live and I keep getting disconnected in the game..every 10 minutes..exactly. It's really annoying. The problem has to be the NAT.
I connect directly from my modem to the Xbox 360. I have no router. My modem is a Westell 6100G that's what it says on the front. On the bottom of the modem it says: Model: G90-610015-20. My connection speed is 1 MB.
Please someone help me if I need to reconfigure the modem. I do know how to get into the modem reconfiguration web page but don't know what to do in there. Please help.
Solved!
Go to Solution.

jdomi78 wrote:
OMG thank you so much! that worked.
What worked? I did not tell you to anything else, other than look at FAQ and answer my question. Huh?
jdomi78 wrote:
The first poster...and what happened to his post? was it deleted?
Huh?
When replying, use the View discussion in a popup feature.
For example, as you can see in the screen shot my last post in this thread seems to disapper when replying.
http://i34.tinypic.com/123vzno.jpg
But it did not really disapper.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Can i connect directly from my cable internet connection, or do I require a cable modem?

I would like to se up a home network using my cable internet without having to rent a cable modem from my service provider. Can I use a Time Capsule to connect directly to the cable internet, or do I need the modem to establish the connection before using the time capsule to create my network?

The Time Capsule does not have a modem onboard. You will need a modem if you want to be able to connect to the Internet.

What is the exact name of the cable I need to connect my old hard drive from my macbook pro (it has been taken out of the computer) to my new macbook pro? I need to transfer files from the old hard drive to the new computer.

What is the exact name of the cable I need to connect my old hard drive from my macbook pro, which has been removed from the computer, to my new macbook pro? I need to transfere files from the old hard drive to the new computer.

No eSATA to USB. Just a SATA/IDE to USB adapter. Google SATA/IDE to USB adapter and you will get tons of links to buy them. Most likely your local computer electronics store has them, although they might be more expensive buying locally than online.
I have several. You can get either USB 2, which what I recommend, or USB 3. USB is backward compatible so a USB 3 adapter will work on a USB 2 port and a USB 2 adapter will work on a USB 3 port. Backward compatible in both directions.
I suggest a USB 2 type because there have been some problems with certain USB 3 devices, the USB 3 interface used isn't all that good in those certain devices. USB 3 is still fairly new where as USB 2 has been around for over 10 years.
synghem wrote:
Thank you LowLuster,
At the apple store they said I needed an esata to usb wire. But looking at wires on line has been confusing. Is sata the same as esata? How do I know if I need a usb 3 or usb 2?

HT2275 Do I need to choose "Share this printer on the network" for printers that are not connected directly to my MacBook Pro? I have two HP printers connected to an Airport Extreme (WiFi turned off). I connect by WiFi to another Airport Extreme w cable t

I have three Airport Extreme (AE) routers in my home network.
The main AE is set up for wifi access. The other two are connected by ethernet cables to the main AE. My MacBook Pro connects to the network wirelessly through the main AE. The AE in my office has two HP printers connected to it by ethernet cables. I have a Kodak All-in-one that is connected by USB to my MacBook Pro.
I reset my printer connections on my MacBook Pro and had to add all the printers back to my printer list. I don't know if I understand what the checkbox "Share this printer on the network" in the Print & Fax System Preferences window is for. My guess is that I don't need to share printers unless they are connected to my MacBook Pro by USB, so I should uncheck the "Share this printer on the network" box for the two HP printers that are connected to the AE. I print to them over the network, but they're not connected directly to any computer. I thought if my MacBook Pro wasset to share them and was shutdown, the printers might not be available to my Mac mini or Dell PC, which connect by ethernet to the office AE (which has the two printers connected to it).
What should I do?
For printers connected directly to a Mac (or PC) by USB, check the "Share this printer on the network" box? In my Sharing Preferences, I check "Share Printers."
For printers connected to the AE by ethernet, UNcheck the "Share this printer on the network" box on my Macs (& PCs?) when I add the printers to my printer list? In my Sharing Preferences, I UNcheck "Share Printers?"
FYI
HP LaserJet Firmware Update Utility for HP P2035n is available
Version: 20120105 (19 Mar 2012)
Operating System(s): Mac OS X, Mac OS X 10.5, Mac OS X 10.6, Mac OS X 10.7
File name: P2035_FW_Update_Utility_20120105_v1_4.dmg (3.8 MB)
line: <http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=3662025&prodNameId=3662049&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=lj-94537-3>

Question is - will the 2 networks (using auto channel negotiations) exist well in the same house or will there be interference?
Things will be fine since the AirPort Express or AirPort Extreme will automatically search for a good wireless channel. If you assign a separate name for the wireless network, then devices will need to log in separately to this network. The extending device will need to be configured in Bridge Mode.
My suggestion would be to configure what is known as a "roaming" network in your question #2. In this case, you would assign the same wireless network name, security and password settings to the extending device and configure it in Bridge Mode.
The advantage to #2 is that you will be able to walk your laptop from a location near the Time Capsule and as you move close to the extending device, the laptop will automatically switch to pick up the stronger signal from the extending AirPort.
You are actually creating a separate network in #2, so you have the advantage of maximum bandwidth for both the TC network and the AirPort network.
Question - does the Airport Express have to be directly connected to the TC or can that connected be through a switched network?
I'm assuming that you are asking about an Ethernet switch here, correct? The AirPort Express or AirPort Extreme can connect to the Ethernet switch, or directly back to a LAN port on the Time Capsule, whichever is easier to setup.
Question 2 - assuming I can connect the Airport Express to the TC over a switched network, will "extending" the network using the Ethernet network still reduce my overall wireless bandwidth?
Connecting the remote device using Ethernet is by far the best way to extend a wireless network because it maintains maximum bandwidth on the network. This is the way that any good commercial network is designed.
Post back if you need any tips to get things setup.

Macbook pro running 10.7.5 Lion printer HP photosmart 7960 . connected direct by USB.

My macbook pro will suddenly not recognise my printer that I have been using for 3 yrs every thing in connection with the printer is greyed out and disabled . I have been into system information and cannot find it there
It is connected direct with a USB.
When I connect it to my sons Macbook it shows up but says printer not connected even when it is. I have tried all suggestions but nothing works.
a coulpe of times I have had a message on my screen telling me that my macbook is pulling to much power from a USB connection even though only the printer is connected.
Many thanks
Edward.

Hi @edwartd
The message about your Mac book pulling too much power from a USB connection, might be related to the printer.
Do you have the printer connected directly to a wall outlet or is it in a surge protector or power bar? Even if you have been using a surge protector/power bar all this time and you feel it is not the cause, please connect it to a wall outlet just so we can eliminate the power source as the root cause.   Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
In this document you will see, ISSUE: Problems or issues may arise when an HP LaserJet series printer is connected to an uninterruptible power supply (UPS), a power strip, or a surge protector
^ This is not limited to Laserjet printers.
If the printer is not in a wall outlet, it might pull power through the USB port to compensate.
With regards to the inability to print right now, I suggest we reset the printing system, repair disk permissions, re-add the printer using the right driver, and try to print again.
Disconnect the USB cable from the computer.
Reset Printing System
Click the Apple icon (   ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Repair Disk Permissions
On the Dock, click Applications, and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer
Reconnect the USB cable, and when you add the printer, please ensure you are using the HP driver.
Select Add other Printer or Scanner
Select the printer you are adding and next to 'Use' you can select the printer driver
I look forward to hearing from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

When send the report directly to the printer from Oracle IDS 9i

Hi.....
I m using Oracle IDS 9i, Oracle AS 9i and Database 9i for my new project.But i m facing a problem when i m trying to show a report from oracle IDS 9i.When i send the report directly to the printer without showing it,then the printer connected to the application server is working.But the printer connected to with PC(From where a send the command) is not working but printer connected with AS is working,but not that one which one i m wanting.....Why this problem is happening?Can anyone help me?
KSI

Note:It is always better to have network based printers rather then PC shared printers. What that means is your printer is not connected to a PC. It has a direct connection to the network via NIC. You would then setup the printer on your AS in the printers setup. If the AS is rebooted you do not need to authenticate the printer shares again with a network based printer.
If I understand you correctly, you have a printer connected to your AS(application server) and a printer connected to your PC. You can submit a report direct to the printer connected to the AS but cannot send a report direct to your printer connected to your PC.
From the symptoms you described, the problem is usually associated with the AS not being able to see the printer shared on your PC. You either have the address to your printer address defined wrong or your AS is trying to direct a job to your printer but doesn't have rights to do it.
First, Try to print a notepad job to your printer attached to your PC from the AS. This will tell you if you have access to do so or not.
- If it can't, you need to figure out why? This has nothing to do with oracle.
Second, thing to check is your Oracle "Report Queue Manager" on the AS. Make sure that you can submit a report manually from the Report Queue Manager. If it fails the "Report Queue Manager" will give you useful errors as to why it failed. This will help you isolate the problem.
Third, Once you can submit a job from the reports queue manager manually to your shared printer you should be able to submit from your application direct. If it still does not work your address to the printer is incorrect. Try submitting manually through the reports queue manager again. When selecting printer you will be given a list of accessible printers from the AS. Select the one connected to your PC. Once selected the full network address will appear. Copy and use this as the printer location in your job submission through your application.
That's it... Where using this right now and it works great. Hope this helps.
Eric.

How do I connect directly to external wall speakers with my iPhone

Hi All,
In the shop where I work they have a couple of speakers built into the wall. There is a wall plate where a person could connect to these speakers with a stereo. (two wires for each speaker) Can I connect directly to these speakers with some sort of a breakout wire coming off the iPhone's 3.5mm headphone jack (suggestions) or the iPhone's dock connector (suggestions). I just want to listen to random music from my iPhone and I really don't want to buy a speaker system for my iphone for this location.
Thanks,
KDC

No. The iPhone doesn't have the power to drive speakers. If you can get to the input of the amp that feeds those speakers, then you do what you want.

Hello! I have in my home 2 iMac, 2 iPad, 2 iPhone, and 1 air base extreme. I don't succeed to connect more than one divice from similar type. I tried everything what I knew. I build another network, etc...

Hello! I have in my home 2 iMac, 2 iPad, 2 iPhone, and 1 air base extreme. I don't succeed to connect more than one divice from similar type. I tried everything what I knew. I build another network, etc...
So only one imac, only one ipad..and so on simultain.
More over, all the divices are conect through wifi to air base but are not receiveing internet as i told above.
I need to disconnect one device to have internet on the second one from the same type!
Could somebody help me?
Many Thnaks,
dan

If your network configuration is:
Cable modem > (Ethernet cable) > [WAN] AEBS > (wireless) > Macs, then
AirPort Extreme Base Station Setup (AEBS) w/High-Speed Cable Modem
Modem/Router Power ReCycling
- Power-off the Cable modem, AEBS, & computer(s). (If possible, leave the modem off overnight.)
- Power-on the Cable modem; Wait at least 30 minutes.
- Power-on the AEBS; Wait at least 5 minutes.
- Power-on the computer(s)
Perform a "hard" reset of the AEBS.
- (ref: http://docs.info.apple.com/article.html?artnum=107451)
Setup the AEBS
With the network components powered down, set up the AEBS, using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the LAN port of the AEBS, and then, try these settings:
AirPort tab
- Base Station Name: <whatever you wish or use the default>
- AirPort Network Name: <whatever you wish or use the default>
- Create a closed network (unchecked)
- Wireless Security: Not enabled
- Channel: Automatic
- Mode: 802.11b/g Compatible
Internet tab
- Connect Using: Ethernet
- Configure: Using DHCP
- WAN Ethernet Port: Automatic
Network tab
- Distribute IP addresses (checked)
- Share a single IP address (using DHCP & NAT) (enabled)
Once you verified that you can get Internet access for all of your computers, you should secure your wireless network. To do so, I suggest that you make these changes:
AirPort tab (optional)
- Create a closed network (checked)
Change Wireless Security
- Wireless Security: WPA Personal
Base Station Options - WAN Ethernet Port
- Enable SNMP Access (unchecked)
- Enable Remote Configuration (unchecked)
- Enable Remote Printer Access (unchecked)
Wireless Options
- Transmitter Power: 10%
Access Control tab (optional)
- + <add the computer(s) that will access this wireless network>

TS2529 I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.

I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.
I have restarted the PC, the iphone, changed the lightining cable and nothign resolves it: backup never completes.

Hi, I disabled the antivirus and the firewall. Same result
I even deleted the backup folder inside C:\Users\...\Apple Computer\MobileSync\Backup to eliminate any corruption in the old backup files.
Nothing changed: Session either times out or i get the same error message: itunes could not back up iphone because iphone disconnected. It always happens during step 3 out of 4 which is "transfering purchased apps from iphone to PC" and comes after step 2 which is backup.
My iphone 5 is not jailbroken, and is a factory unlocked phone.
Any other suggestion?
Pls help

I have a time capsule and two air port expresses. The time capsule is in the middle of my house, the expresses equidistant in opposite directions. I would like the expresses to both connect directly to the capsule, but they are connected in serial. How?

I have a time capsule and two air port expresses. The time capsule is in the middle of my house, the expresses equidistant in opposite directions. I would like the expresses to both connect directly to the capsule, but they are connected in serial. How to reconfigure.
I ask because I have music running out of both expresses, and the one that is most distant from the time capsule (routed through the first express) regularly drops the music signal from itunes. And I am guessing the serial configuration of the routers has something to do with this, but my root problem is music dropout - any thoughts would be appreciated.

If you have the the most current model of the Express devices, the default setup is to "extend" the wireless signal. In this type of setup, each Express communicates directly to the Time Capsule.
How did you setup the AirPort Express devices?
What version of the Mac operating system are you using on your MacBook? Or, do you have AirPort Utility installed on your iPad?

I have an HP LaserJet 8150N that I am trying to get connected via ethernet cable directly to my iMac. I always had this printer connected via a network so I don't know if I am able to connect directly with a cable since it is a network printer.

I have an HP LaserJet 8150N that I use for my work and I have had this printer for ever and it is one heck of a work horse! I am trying to get it connected via ethernet cable directly to my iMac. I always had this printer connected via a network so I don't know if I am able to connect directly with a cable since it is a network printer. I have tried to reconfigure the printer using the JetDirect menu giving it a new IP address but still no luck. If anyone could help me through this issue I would appreciate it.

moonlightcaravan wrote:
Second, seeing "connecting" and connection failed is normal. You must click on "Connect As" in the Finder window and then enter the username and password for the admin account on the other computer. That should fix things.
Thanks for responding.
When does clicking on "Connect As" happen in the process above?
After step six? Seven?
After the connection has failed?
Is this the FInder window that shows the icon of the computer you want to copy the file from?
You should see "Connect As" in the Finder near the top right of the window as shown below:
!http://blog.brothersoft.com/wp-content/uploads/2008/11/howto_copy_files_to_or_from_your_iphone02.jpg!

DB 12c Connection directly to a PDB from frameworks

Similar Messages

Maybe you are looking for