DB 13 Calender-DB check is getting Failed

Hi Team,
Configured DB check job is getting failed in DB13 Calender with the following error.
Job started
Step 001 started (program RSDBAJOB, variant &0000000000015, user name BATCHJOBS, language E)
Execute log. command SAPDBA on host ukcbx001
__Parameters: -check -u /
SAPDBA: SELECT TYPE,PARAM,ACTIVE,SEVERITY,CHKOP,CH KVAL,UNIT,CHKDESC FROM
        "SAPR3".DBCHECKORA
ORA-00942: table or view does not exist
SAPDBA: Could not read check criteria.
        Taking defaults.
Job finished.
Please help me if any body have idea on it.
Best Reagrds,
Vinod

Hi vinod,
ORA-00942 error occurs when execute Brtools or sapdba. This problem occur due to old version of SAPDBA.please update your Brtools & try again .
This may resolve your problem.
karan

Similar Messages

  • Content Server URL Check is getting failed.

    Hi,
    We have Installed Content Server 6.4 on Windows Server 2008 (64 Bit OS) and IIS 7.0 with all the latest patches.
    The sapinst log file shows that the Installation was successfull with no errors.
    But, still URL check for Content server is getting failed.
    URL which is used : http://<HOSTNAME>:<Port>/ContentServer/ContentServer.dll?serverInfo
    Please Help.
    Thanks,
    Deepak

    Hi,
    Did you configure the following steps for the content server on the windows server for the IIS
    Created one local user u201Cxxxxxxxu201D on the windows system.
    Check that the password of the user on the windows should never expire.
    In the authentication method select the options.
    Integrated windows authentatication
    Basis authentication.
    Configure IIS for ContentServer & CacheServer and adjust Folder security options
    Did you create any content reprosetry in OAC0 Transaction in the system which you want to link the Content server.
    Thanks
    Rishi Abrol

  • BI Publisher Bursting program getting failed.

    Hi,
    The bursting program is getting failed. I configured the BI Publisher scheduler configuration. when i schedule a report it is delivering successfully , but when i burst it is getting failed. In the scheduler history it is showing the below message for all the delivery by the burst program.
    Delivery Type           EMAIL
         Status          Failed
         System Message          
    C:\DOCUME~1\SPALAN~1\LOCALS~1\Temp\3\xdofQuBd3MglK093010_092711319109.fo (The system cannot find the path specified).
    Do i need to create any TEMP folder similar to Xml publisher temp folder in ORACLE APPS that is used for bursting. Where can i check the Bi publisher Scheduler LOG file to know the error clearly.
    Thanks in advance.

    Create a BI Publisher log folder where in you should be able to find the log information in xdo log file.
    Here are the steps:
    1.GOTO OraHome_1\Jdk\Jre\lib folder and create a file xdodebug.cfg
    2.Enter following information in the file:
    LogLevel = STATEMENT
    LogDir = <Location of the log folder >
    3.Save and close the xdodebug.cfg file
    4.Restart OC4J services
    5.Check if the Log folder mentioned in the cfg file is created.
    Thanks,
    Shilpa

  • "Save Hierarchies" step in Process chain getting failed

    Hello all,
    After searching thoroughly through various links / forums, i failed to get a solution. So, I am posting here.
    Recently we had a system copy. After that, in Quality system - "Save all Hierarchies" step in PC is getting failed.
    I ran the process chain for 3 times till now:
    1) Sometimes, it fails at batch monitor itself with UNCAUGHT_EXCEPTION runtime error.
    2) Sometimes, it fails saying "Error 0 when reading PSA 1" & "No hierarchy found for the selection criteria entered".
    When it fails with "Error 0 when reading PSA 1", then the above Hierarchy info package which is green automatically turns RED again with Process monitor saying "No PSA tables for the selection criteria".
    I also went through the below sdn links.
    http://scn.sap.com/thread/278794
    http://scn.sap.com/thread/1753212
    Things I did:
    1) Tried replicating & activating the Transfer rules and Data source.
    2) Repeated the step, as suggested in one post.
    3) Refreshed the OLTP hierarchies in Infopack. selections.
    I have attached a screenshot of a sample Data source which says Modified, though the transfer rules are active. Also, the process chain sample.
    Please let me know, if someone has faced this issue. Whatelse did I miss? Any clue.
    Thanks,
    Vikranth.

    Hi Raman,
    I couldn't retransport, but i removed it from schedule and re-activated it. But, i think the issue lies with one of the Info objects 0PROFIT_CTR.
    Because, when i tried to check the hierarchy structure; there are duplicate entries for one code. Can we delete one of them? Is it preferable.
    I tried using OSS and used a program RSR_REPAIR_INFOAREAHIER but this showed no errors.
    Any clue?
    Thanks,
    VIkranth

  • Installation keeps getting failed on some CC applications

    After performing clean install Mac OS X 10.9 (Mavericks), I tried to install Adobe CC applications back on my Mac couple days ago.
    While other CC applications had been installed without a hassel, I find two applications that kept failling to be installed.
    Audition CC and Bridge CC are the ones I am having trouble with.
    When I try to install it, it fails at 3% or so. (It varies after reboot, but keeps failing.)
    After I click "Retry" as the installation keeps failing, the progress bar reaches up to 41%.
    Then no matter how many times I click "Retry", installation gets failed instantly.
    The error message says: "Installation Failed The download appears corrupted. Please try again after a few minutes.(-60)"
    I've tried installing them both on my iMac and MacBook Air, but the same installation failure occurs.
    I've tried installing Audition CC and Bridge CC on my MacBook Air at home, but the same installation failure occurs.
    I've tried safe boot. I've tried wating couple days. I've tried re-clean install MacOS X. I've tried changing locations. I've tried contacting Chat Support.
    The same installation failure occured.
    I suspect that the problem is at Adobe's end, but I am not certain.
    Is there any workaround for me to install Adobe CC and Bridge CC?
    Thanks in advance for your help.

    Hi 상욱군,
    Please try installing in the root user account and check.

  • IT performance report in workcenter logon getting failed

    Hi All,
    When i click on the IT performance report in workcenter log in getting failed
    Steps:
    Solman_workcenter tx -System monitoring ->System status -selected the system
    When I click on IT performance report I am not able to login I am getting this below  error when i give  the username and password  of SOlman system
    SAP Web Application Server [SID]
    username
    password
    Problem:
    Logon failed
    What has happened?
    Call of URL http://<hostname>.wilns1002.accenturewilm.com:8000/sap/bw/BEx terminated due to error in logon data.
    Note
    Logon performed in system SID.
    Logon performed for client ?sa, user sm_admin, and language EN.
    What can I do?
    Check that you have entered the client, user, and password correctly.
    If you do not yet have a user ID, contact your system administrator.
    Error Code: ICF-LE-http-c:?sa-l:E-T:231-C:3-U:54-P:4-L:4
    HTTP 401 - Unauthorized
    Your SAP Internet Communication Framework Team
    Regards,
    Neni

    hi,
    this was already discussed,
    workarround suggested this was due to single sign on.
    chk the forum
    [URL http://server:8000/SAP/BW/BEX is not accessible|URL http://server:8000/SAP/BW/BEX is not accessible]
    [/message/5063236#5063236 [original link is broken]|/message/5063236#5063236 [original link is broken]]
    Jansi

  • SSIS Job is getting failed with an error "0x00000005 : Failed to compiled scripts contained in the package.

    Hi All. Could anyone resolve my issue.
    I was created a package with an Script task written in VB.Net.
    The Package was executing Successfully in BIDS.
    But when i tried to exceute the same using Sql server Agent Job, Its getting Failed with the below error message
    "Executed as user: Admin. Microsoft (R) SQL Server Execute Package Utility  Version 11.0.2100.60 for 32-bit  Copyright (C) Microsoft Corporation. All rights reserved.    Started:  5:12:27 PM  Error: 2013-03-13 17:12:32.33    
    Code: 0x00000005     Source: Checking Alcon Files Checking Alcon Files     Description: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors. 
    End Error  Error: 2013-03-13 17:12:32.33     Code: 0x00000005     Source: Checking Alcon Files Checking Alcon Files     Description: BC30179 - enum 'ScriptResults' and enum 'ScriptResults' conflict
    in class 'ScriptMain'., ScriptMain.vb, 156, 22  End Error  Error: 2013-03-13 17:12:32.36     Code: 0x00000005     Source: Checking Alcon Files Checking Alcon Files     Description: The binary
    code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully.  End Error  Error: 2013-03-13 17:12:34.28     Code: 0x00000005    
    Source: Formating Excel Sheet Formating Excel Sheet     Description: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors.  End Error  Error: 2013-03-13 17:12:34.28    
    Code: 0x00000005     Source: Formating Excel Sheet Formating Excel Sheet     Description: BC30179 - enum 'ScriptResults' and enum 'ScriptResults' conflict in class 'ScriptMain'., ScriptMain.vb, 191, 22  End Error 
    Error: 2013-03-13 17:12:34.29     Code: 0x00000005     Source: Formating Excel Sheet Formating Excel Sheet     Description: The binary code for the script is not found. Please open the script in the
    designer by clicking Edit Script button and make sure it builds successfully.  End Error  Error: 2013-03-13 17:12:51.56     Code: 0x00000004     Source: Checking Alcon Files      Description:
    The binary code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully.  End Error  Error: 2013-03-13 17:12:51.56     Code: 0xC0024107    
    Source: Checking Alcon Files      Description: There were errors during task validation.  End Error  DTExec: The package execution returned DTSER_FAILURE (1).  Started:  5:12:27 PM  Finished: 5:12:51 PM 
    Elapsed:  24.336 seconds.  The package execution failed.  The step failed."
    Please give some solution to this.
    Thanks in advance

    Are you editing this job in SQL 2012? Is it wrapping your paths in \"? Like for example does the command line tab on the step look like this:
    /FILE "\"D:\yourPathGoesHere.dtsx\""  /CONFIGFILE "\"D:\yourPathGoesHere.dtsConfig\"" /CHECKPOINTING OFF /REPORTING E
    That's the problem I had, and I resolved it by recreating the whole thing via SQL Script and getting rid of all those \" things. I think that is preventing SSIS from looking up the precompiled binaries for your Script Task. So you should edit the command
    line manually:
    /FILE "D:\yourPathGoesHere.dtsx"  /CONFIGFILE "D:\yourPathGoesHere.dtsConfig" /CHECKPOINTING OFF /REPORTING E
    Please write back whether that helps you. David Dye's answer didn't help me at all.

  • How to solve the issue "CUV check user equivalence failed" ?

    Folks,
    Hello. I am installing Oracle 11gR2 RAC using 2 VMs (rac1 and rac2) whose OS are Oracle Linux 5.6 in VMPlayer according to the website http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
    In order to install Grid Infrastructure, we need to run Cluster Utility Verification (CUV) at first by running the cammand below:
    [ora11g@rac1 grid]$ ./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose
    Its output:
    Performing pre-checks for cluster services setup
    Check: User equivalence for user “ora11g”
    Node Comment
    rac1 failed
    rac2 failed
    Result: PRVF-4007 : User equivalence check failed for user “ora11g”
    ERROR:
    User equivalence unavailable on all the specified nodes
    Verification cannot proceed
    Pre-check for cluster services setup was unsuccessful on all the nodes.
    As you see above, check user equivalence failed. I have run the 4 commands to fix this error as below:
    [ora11g@rac1 /]$ ssh-keygen
    Its output:
    Generating public/private rsa key pair.
    Enter file in which to save the key (/home/grid/.ssh/id_rsa):
    Enter passphrase (empty for no passphrase):
    Enter same passphrase again:
    Your identification has been saved in /home/grid/.ssh/id_rsa.
    Your public key has been saved in /home/grid/.ssh/id_rsa.pub.
    The key fingerprint is:
    0c:10:6c:3b:ae:21:63:64:f8:0d:0e:d8:f0:41:32:ff [email protected]
    [ora11g@rac1 .ssh]$ cat *pub >>authorized_keys
    [ora11g@rac1 .ssh]$ ssh rac1
    Its output:
    The authenticity of host ‘rac1 (127.0.0.1)’ can’t be established.
    RSA key fingerprint is 9d:ae:51:7c:72:81:07:37:31:92:f1:c8:90:bc:52:55.
    Are you sure you want to continue connecting (yes/no)? yes
    Warning: Permanently added ‘rac1′ (RSA) to the list of known hosts.
    Write failed: Broken pipe.
    [ora11g@rac1 .ssh]$ ssh rac1-priv
    Its output:
    The authenticity of host ‘rac1-priv (192.168.137.35)’ can’t be established.
    RSA key fingerprint is 9d:ae:51:7c:72:81:07:37:31:92:f1:c8:90:bc:52:55.
    Are you sure you want to continue connecting (yes/no)? yes
    Warning: Permanently added ‘rac1-priv,192.168.137.35′ (RSA) to the list of known hosts.
    Write failed: Broken pipe.
    After run the 4 commands above, I run the command below again:
    [ora11g@rac1 grid]$ ./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose
    Its output is the same:
    PRVF-4007 : User equivalence check failed for user “ora11g”
    ERROR:
    User equivalence unavailable on all the specified nodes
    Verification cannot proceed
    I think the problem is "Broken pipe" and ssh cannot write authorized_keys to the machines.
    My question is:
    Do any folk understand how to solve the issue CUV "check user equivalence failed" for 2 VMs ?
    Thanks.

    Folks,
    Hello. Thanks a lot for replying.
    I have installed Grid Infrastructure a few times. Each time, on step 7 of 9, the installer fixes and checks 2 machines correctly. The entire installation has 3 parts as below:
    1) Install Grid Infrastructure for a Cluster
    2) Execute Root Scripts for Install Grid Infrastructure for a Cluster (script is root.sh)
    3) Configure Oracle Grid Infrastructure for a Cluster that includes NCA, ASMCA, PICA and CVU.
    Each time, on step 8 of 9, the Installer installs Grid Infrastructure for a Cluster successfully that includes "Prepare, Copy files, Link binaries, Setup files and Perform remote operations".
    But when the Installer get to part 3 CVU, it fails and then the Database cannot be installed.
    Deinstall Grid is a very complicated process to do. Because of this reason, we need to run CVU at first to make sure everything is correct for 2 machines before install Grid.
    Even we ignore "user equivalence (ssh)", we don't know whether other items can be passed or not because CVU cannot proceed to check the machines.
    My question is:
    How to have the script "runcluvfy.sh" continue to check the machines while confronting "user equivalence failed" ?

  • Filesystem Restore is getting failed "NDMP server reported a general error"

    When i performing filesystem restore to different location, its getting failed with the error message "NDMP server reported a general error (name not found?)" whereas restoring
    in the same location is getting success without any error.
    Please find the attached transcript output for the failed job with debug on.
    ob>catxcr -fl0 admin/80
    2012/09/04.13:17:33 ______________________________________________________________________
    2012/09/04.13:17:33
    2012/09/04.13:17:33 Transcript for job admin/80 running on backup-server
    2012/09/04.13:17:33
    2012/09/04.13:17:33 (amh) qdv__automount_in_mh entered
    2012/09/04.13:17:33 (amh) qdv__automount_in_mh tape at 2012/09/04.13:17:33, flags 0x100
    2012/09/04.13:17:33 (amh) mount volume options list contains:
    2012/09/04.13:17:33 (amh) vtype 1 (rd), vid DC-ORCL-MF-000001, vs_create 1346566310, family (null), retain (null), size 0,
    mediainfo 2, scratch 0
    2012/09/04.13:17:34 (amh) don't preserve previous mh automount state
    2012/09/04.13:17:34 (gep) getting reservation for element 0x1 (dte)
    2012/09/04.13:17:34 (una) unload_anywhere entered
    2012/09/04.13:17:34 (fal) find_and_load entered
    2012/09/04.13:17:34 (fal) calling find_vid2 for volume DC-ORCL-MF-000001
    2012/09/04.13:17:34 (fal) find_vid2 worked - volume DC-ORCL-MF-000001 in se11 (not in drive)
    2012/09/04.13:17:34 (fal) moving volume FL-MF-000001 from se11 to dte1 (tape)
    2012/09/04.13:18:12 (fal) load of tape worked; returning to do automount
    2012/09/04.13:18:12 (fal) find_and_load exited
    2012/09/04.13:18:12 (atv) qdv__automount_this_vol entered
    2012/09/04.13:18:12 (atv) calling qdv__mount
    2012/09/04.13:18:12 (mt) qdv__read_mount_db() succeeded, found vol_oid 0
    2012/09/04.13:18:20 (mt) qdv__read_label() succeeded; read 65536 bytes
    2012/09/04.13:18:20 (mt) exp time obtained from label
    2012/09/04.13:18:20 (mt) qdb__label_event() returned vol_oid 137
    2012/09/04.13:18:20 (mt) setting vol_oid in mount_info to 137
    2012/09/04.13:18:20 (mt) updated volume close time from db
    2012/09/04.13:18:20 (atv) qdv__mount succeeded
    2012/09/04.13:18:20 (atv) automount worked
    2012/09/04.13:18:20 (atv) qdv__automount_this_vol exited
    2012/09/04.13:18:20 (gep) getting reservation for element 0x1 (dte)
    2012/09/04.13:18:20 (amh) 0 automount worked - returning
    2012/09/04.13:18:20 (amh) end of automount at 2012/09/04.13:18:20 (0x0)
    2012/09/04.13:18:20 (amh) returning from qdv__automount_in_mh
    2012/09/04.13:18:20 Info: volume in tape is usable for this operation.
    13:18:20 OBTR: obtar version 10.4.0.1.0 (Solaris) -- Fri Sep 23 23:41:16 PDT 2011
    Copyright (c) 1992, 2011, Oracle. All rights reserved.
    13:18:20 OBTR: obtar -Xjob:admin/80 -Xob:10.4 -xOz -Xbga:admin/80 -JJJJv -y /usr/tmp/[email protected] -Xrdf:admin/80 -e DC-ORCL-
    MF-000001 -F3 -f tape -Xrescookie:0xBE1A8F2 -H client01 -u
    13:18:20 RRDF: restore "/wdn/file01" as "/restore", pos 000043290003
    13:18:20 OBTR: running as root/root
    13:18:20 OBTR: record storage set to internal memory
    13:18:20 ATAL: reserved drive tape, cookie 0xBE1A8F2
    13:18:20 OBTR: obsd=1, is_job=1, is_priv=0, os=3
    13:18:20 OBTR: rights established for user admin, class admin
    13:18:20 SUUI: user info root/root, ??/??
    13:18:21 MAIN: using blocking factor 128 from media defaults/policies
    13:18:21 STTY: background terminal I/O or is a tty
    13:18:21 MAIN: interactive
    13:18:21 DOLM: nop (for tape (raw device "/dev/obt1"))
    13:18:21 DOLM: ok
    13:18:22 RLE: connecting to volume/archive database host
    13:18:22 RLE: device tape (raw device "/dev/obt1")
    13:18:22 RLE: mount_info is valid
    13:18:22 RLE: qdb__device_spec_se reports vol_oid 0, arch_oid 0
    13:18:22 A_O: using max blocking factor 128 from media defaults/policies
    13:18:22 A_O: tape device is local
    13:18:22 A_O: Devname: HP,Ultrium 4-SCSI,H61W
    13:18:22 Info version: 11
    13:18:22 WS version: 10.4
    13:18:22 Driver version: 10.4
    13:18:22 Max DMA: 2097152
    13:18:22 Blocksize in use: 65536
    13:18:22 Query frequency: 134217728
    13:18:22 Rewind on close: false
    13:18:22 Can compress: true
    13:18:22 Compression enabled: true
    13:18:22 Device supports encryption: true
    13:18:22 8200 media: false
    13:18:22 Remaining tape: 819375104
    13:18:22 A_GB: ar_block at 0x100352000, size=2097152
    13:18:22 A_GB: ar_block_enc at 0x100554000, size=2097152
    13:18:22 ADMS: reset library tape selection state
    13:18:22 ADMS: reset complete
    13:18:22 GLMT: returning "", code = 0x0
    13:18:22 VLBR: from chk_lm_tag: "", code = 0x0
    13:18:22 VLBR: tag on label just read: ""
    13:18:22 VLBR: master tag now ""
    13:18:22 RLE: noticed volume TEST-MF-000001, file 1, section 1, vltime 1346566310, vowner root, voltag
    13:18:22 RLE: qdb__noticed_se reports vol_oid 137, arch_oid 369
    (alv) backup image label is valid, file 1, section 1
    (ial) invalidate backup image label (was valid)
    13:18:22 RSMD: rewrote mount db for tape
    13:18:22 ULVI: set mh db volume id "DC-ORCL-MF-000001" (retid ""), volume oid 137, code 0
    13:18:22 ULTG: set mh db tag "" (retid "DC-ORCL-MF-000001"), volume oid 137, code 0
    13:18:22 CALE: created backup section oid list entry for oid 369
    13:18:22 PF: here's the label at the current position:
    Volume label:
    Intro time: Fri May 04 13:35:03 2012
    Volume UUID: d40ea6c6-d6c2-102f-bf51-da716418c062
    Volume ID: TEST-MF-000001
    Volume sequence: 1
    Volume set owner: root
    Volume set created: Sun Sep 02 11:56:50 2012
    Volume set closes: Sat Dec 01 11:56:50 2012 (no writes after this time)
    Volume set expires: Sat Mar 02 11:56:50 2013
    Media family: TEST-MF
    Original UUID: d40ea6c6-d6c2-102f-bf51-da716418c062
    Archive label:
    File number: 1
    File section: 1
    Owner: root
    Client host: client01
    Backup level: 0
    S/w compression: no
    Archive created: Sun Sep 02 11:56:50 2012
    Archive owner UUID: f32ac938-6410-102f-a3d5-b94c4468403b
    Owner class UUID: f32a3504-6410-102f-a3d5-b94c4468403b
    Encryption: off
    Searching tape for requested file. Please wait...
    13:18:22 PF: spacing forward 2 FMs
    13:18:24 VLBR: not at bot: 0x90000000
    13:18:24 VLBR: tag on label just read: ""
    13:18:24 VLBR: master tag now ""
    13:18:24 RLE: noticed volume TEST-MF-000001, file 3, section 1, vltime 1346566310, vowner root, voltag
    13:18:24 RLE: qdb__noticed_se reports vol_oid 137, arch_oid 380
    (alv) backup image label is not valid
    13:18:24 ULVI: set mh db volume id "TEST-MF-000001" (retid ""), volume oid 137, code 0
    13:18:24 ULTG: set mh db tag "" (retid "DC-ORCL-MF-000001"), volume oid 137, code 0
    13:18:24 CALE: created backup section oid list entry for oid 380
    13:18:24 VLBR: setting last section flag for backup section oid 369
    13:18:24 PF: here's the label at the current position:
    Volume label:
    Intro time: Fri May 04 13:35:03 2012
    Volume UUID: d40ea6c6-d6c2-102f-bf51-da716418c062
    Volume ID: TEST-MF-000001
    Volume sequence: 1
    Volume set owner: root
    Volume set created: Sun Sep 02 11:56:50 2012
    Volume set closes: Sat Dec 01 11:56:50 2012 (no writes after this time)
    Volume set expires: Sat Mar 02 11:56:50 2013
    Media family: TEST-MF
    Original UUID: d40ea6c6-d6c2-102f-bf51-da716418c062
    Archive label:
    File number: 3
    File section: 1
    Owner: root
    Client host: client01
    Backup level: 0
    S/w compression: no
    Archive created: Tue Sep 04 11:53:17 2012
    Archive owner UUID: f32ac938-6410-102f-a3d5-b94c4468403b
    Owner class UUID: f32a3504-6410-102f-a3d5-b94c4468403b
    Encryption: off
    13:18:24 PF: at desired location
    13:18:24 ACFD: positioning (SCSI LOCATE) is available for this device
    13:18:24 ADMS: reset library tape selection state
    13:18:24 ADMS: reset complete
    13:18:24 VLBR: not at bot: 0x90000000
    13:18:24 VLBR: tag on label just read: ""
    13:18:24 VLBR: master tag now ""
    13:18:24 RLE: noticed volume DC-ORCL-MF-000001, file 3, section 1, vltime 1346566310, vowner root, voltag
    13:18:24 RLE: qdb__noticed_se reports vol_oid 137, arch_oid 380
    (alv) backup image label is not valid
    13:18:25 ULVI: set mh db volume id "DC-ORCL-MF-000001" (retid ""), volume oid 137, code 0
    13:18:25 ULTG: set mh db tag "" (retid "DC-ORCL-MF-000001"), volume oid 137, code 0
    13:18:25 CALE: found existing backup section oid list entry for oid 380
    13:18:25 ADMS: reset library tape selection state
    13:18:25 ADMS: reset complete
    13:18:25 RLE: read volume DC-ORCL-MF-000001, file 3, section 1, vltime 1346566310, vowner root, voltag
    13:18:25 RLE: qdb__read_se reports vol_oid 137, arch_oid 380
    (alv) backup image label is not valid
    13:18:25 ULVI: set mh db volume id "DC-ORCL-MF-000001" (retid ""), volume oid 137, code 0
    13:18:25 ULTG: set mh db tag "" (retid "DC-ORCL-MF-000001"), volume oid 137, code 0
    13:18:25 PTNI: positioning to "/wdn/file01" at 000043290003
    13:18:27 CNPC: data host reports this butype_info:
    13:18:27 CNPC: tar (attr 0x2C78: B_DIRECT, R_DIRECT, B_INCR, R_INCR, B_FH_DIR)
    13:18:27 CNPC: DIRECT = y
    13:18:27 CNPC: HISTORY = y
    13:18:27 CNPC: LEVEL = 0
    13:18:28 SNP: connection types supported by mover -
    13:18:28 tcp
    13:18:28 SNP: connection types supported by data service -
    13:18:28 tcp
    13:18:28 SNP: selected data connection type: tcp
    13:18:28 SNP: using separate data and tape/mover connections
    13:18:28 SNP: the NDMP protocol version for tape/mover is 4, for data is 4
    13:18:28 SNP: backup-server's NDMP tape/mover service session id is 7844
    13:18:28 RONPC: begin OSB NDMP data restore
    13:18:28 RONPC: need to restore from "/wdn/file01" tree:
    13:18:28 RONPC: tape position before restore is 000043290004
    13:18:28 MGS: ms.record_size 65536, ms.record_num 0x0, ms.bytes_moved 0x0
    13:18:28 RONPC: about to start restore; here are the environment variables:
    13:18:28 RONPC: env BEGINTREE=1
    13:18:28 RONPC: env NAME=/wdn/file01
    13:18:28 RONPC: env AS=/restore
    13:18:28 RONPC: env POSLEN=6
    13:18:28 RONPC: env POS=
    13:18:28 RONPC: env BLEVEL=0
    13:18:28 RONPC: env FIRSTCH=1
    13:18:28 RONPC: env POS_HERE=1
    13:18:28 RONPC: env EX2KTYPE=
    13:18:28 RONPC: env DATA_BLOCK_SIZE=64
    13:18:28 RONPC: env SKIP_RECORDS=3
    13:18:28 RONPC: env LABEL_VERSION=0000012
    13:18:28 SMW: setting NDMP mover window to offset 0x0, length 0xFFFFFFFFFFFFFFFF
    13:18:28 MLIS: mover listen ok for tcp connection; these addresses were reported:
    13:18:28 MLIS: 0.0.0.0:58243
    13:18:28 MLIS: 192.168.3.109:58243
    13:18:28 RONPC: tape fileno/blockno before restore are 0/0
    13:18:28 APNI: a preferred network interface does not apply to this connection
    13:18:28 DPNI: load balancing is in use, skipping default PNI
    13:18:28 RONPC: directing data service to connect to mover
    13:18:01 PPVL: obtar option OB_JOB = admin/80
    13:18:01 PPVL: obtar option OB_RB = 10.4
    13:18:01 PPVL: obtar option OB_EXTR = 1
    13:18:01 PPVL: obtar option OB_EXTRACT_ONCE = 1
    13:18:01 PPVL: obtar option OB_DEBUG = 1
    13:18:01 PPVL: obtar option OB_DEBUG = 1
    13:18:01 PPVL: obtar option OB_DEBUG = 1
    13:18:01 PPVL: obtar option OB_DEBUG = 1
    13:18:01 PPVL: obtar option OB_VERBOSE = 1
    13:18:01 PPVL: obtar option OB_CLIENT = client01
    13:18:01 PPVL: obtar option OB_HONOR_IN_USE_LOCK = 1
    13:18:01 PPVL: obtar option OB_STAT = 1
    13:18:01 PPVL: obtar option OB_VOLUME_LABEL = 1
    13:18:01 PPVL: obtar option OB_SKIP_CDFS = 1
    13:18:01 PPVL: obtar option OB_DEVICE = tape
    13:18:01 PPVL: obtar option OB_BLOCKING_FACTOR = 128
    13:18:01 PPVL: obtar option OB_VERIFY_ARCHIVE = no
    13:18:01 PPVL: obtar option OB_PQT = 134217728
    13:18:01 DSIN: 2GB+ files are supported, 2GB+ directories are supported
    13:18:01 SETC: identity is already root/root
    13:18:28 qtarndmp__ssl_setup: SSL has been disabled via the security policy
    13:18:28 RONPC: issuing NDMP_DATA_START_RECOVER
    13:18:33 RONPC: started NDMP restore
    13:18:33 MNPO: received NDMP_NOTIFY_DATA_READ, offset 0x0, length 0xFFFFFFFFFFFFFFFF
    13:18:33 MNPO: sent corresponding NDMP_MOVER_READ
    13:18:33 QTOS: received osb_stats message for job admin/80, kbytes 64, nfiles 0
    13:18:33 await_ndmp_event: sending progress update
    13:18:33 SPU: sending progress update
    Error: Could not make file /restore: Is a directory
    13:19:27 MNPO: jumped over filemark fence
    13:19:27 VLBR: not at bot: 0x90000000
    13:19:27 VLBR: tag on label just read: ""
    13:19:27 QTOS: received osb_stats message for job admin/80, kbytes 3145856, nfiles 0
    13:19:27 VLBR: master tag now ""
    13:19:27 RLE: set kb remaining to 819375104
    13:19:27 RLE: qdb__set_kb_rem_se reports vol_oid 0, arch_oid 0
    13:19:27 RLE: noticed nil label
    13:19:27 RLE: qdb__noticed_se reports vol_oid 0, arch_oid 0
    13:19:27 VLBR: setting last section flag for backup section oid 380
    13:19:27 MNPO: sent successful mover close
    13:19:27 MNPO: data service halted with reason=internal error
    13:19:27 SNPD: Data Service reported bytes processed 0xC0020000
    13:19:27 SNPD: stopping NDMP data service (to transition to idle state)
    13:19:27 MNPO: mover halted with reason=connection closed
    13:19:27 MGS: ms.record_size 65536, ms.record_num 0xC002, ms.bytes_moved 0xC0020000
    Error: NDMP operation failed: unspecified error reported (see above)
    13:19:27 RONPC: finished NDMP restore with status 97
    13:19:27 RONPC: NDMP read-ahead positioned tape past filemark; backing up
    13:19:27 RONPC: We believe this because initial file # 0 isn't end file # 1
    13:19:27 RONPC: the section-relative block number at end of restore is 0x1
    13:19:27 RONPC: tape position after restore is 0001032B0080
    13:19:27 QREX: exit status upon entry is 97
    13:19:27 QREX: released reservation on tape drive tape
    13:19:27 RDB: reading volume record for oid 137
    13:19:27 RDB: reading section record for oid 369
    13:19:27 RDB: adding record for oid 369 (file 1, section 1) to section list
    13:19:27 RDB: reading section record for oid 378
    13:19:27 RDB: adding record for oid 378 (file 2, section 1) to section list
    13:19:27 RDB: reading section record for oid 380
    13:19:27 RDB: adding record for oid 380 (file 3, section 1) to section list
    13:19:27 RDB: file 1 has all 1 required sections; clearing incomplete backup flags
    13:19:27 RDB: reading section record for oid 369
    13:19:27 RDB: file 2 has all 1 required sections; clearing incomplete backup flags
    13:19:27 RDB: reading section record for oid 378
    13:19:27 RDB: file 3 has all 1 required sections; clearing incomplete backup flags
    13:19:27 RDB: reading section record for oid 380
    13:19:27 RDB: 1 volumes in volume list
    13:19:27 RDB: volume oid 137 reports first:last files of 1:3
    13:19:27 RDB: marking volume oid 137 as authoritative
    13:19:27 VMA: reading volume record for oid 137
    13:19:27 RLYX: exit status 97; checking allocs...
    13:19:27 RLYX: from mm__check_all: 1
    ob> catxcr -fl0 admin/81
    2012/09/04.13:19:29 ______________________________________________________________________
    2012/09/04.13:19:29
    2012/09/04.13:19:29 Transcript for job admin/81 running on backup-server
    2012/09/04.13:19:29
    2012/09/04.13:19:30 Info: mount data verified.
    2012/09/04.13:19:30 Info: volume in tape is usable for this operation.
    13:19:31 OBTR: obtar version 10.4.0.1.0 (Solaris) -- Fri Sep 23 23:41:16 PDT 2011
    Copyright (c) 1992, 2011, Oracle. All rights reserved.
    13:19:31 OBTR: obtar -Xjob:admin/81 -Xob:10.4 -xOz -Xbga:admin/81 -JJJJv -y /usr/tmp/[email protected] -Xrdf:admin/81 -e DC-ORCL-
    MF-000001 -F1 -f tape -Xrescookie:0xBE1A8F6 -H client01 -u
    13:19:31 RRDF: restore "/wdn/testf" as "/restore", pos 000000010003
    13:19:31 OBTR: running as root/root
    13:19:31 OBTR: record storage set to internal memory
    13:19:31 ATAL: reserved drive tape, cookie 0xBE1A8F6
    13:19:31 OBTR: obsd=1, is_job=1, is_priv=0, os=3
    13:19:31 OBTR: rights established for user admin, class admin
    13:19:31 SUUI: user info root/root, ??/??
    13:19:31 MAIN: using blocking factor 128 from media defaults/policies
    13:19:31 STTY: background terminal I/O or is a tty
    13:19:31 MAIN: interactive
    13:19:31 DOLM: nop (for tape (raw device "/dev/obt1"))
    13:19:31 DOLM: ok
    13:19:32 RLE: connecting to volume/archive database host
    13:19:32 RLE: device tape (raw device "/dev/obt1")
    13:19:32 RLE: mount_info is valid
    13:19:32 RLE: qdb__device_spec_se reports vol_oid 0, arch_oid 0
    13:19:32 A_O: using max blocking factor 128 from media defaults/policies
    13:19:32 A_O: tape device is local
    13:19:32 A_O: Devname: HP,Ultrium 4-SCSI,H61W
    13:19:32 Info version: 11
    13:19:32 WS version: 10.4
    13:19:32 Driver version: 10.4
    13:19:32 Max DMA: 2097152
    13:19:32 Blocksize in use: 65536
    13:19:32 Query frequency: 134217728
    13:19:32 Rewind on close: false
    13:19:32 Can compress: true
    13:19:32 Compression enabled: true
    13:19:32 Device supports encryption: true
    13:19:32 8200 media: false
    13:19:32 Remaining tape: 819375104
    13:19:32 A_GB: ar_block at 0x100352000, size=2097152
    13:19:32 A_GB: ar_block_enc at 0x100554000, size=2097152
    13:19:32 ADMS: reset library tape selection state
    13:19:32 ADMS: reset complete
    13:19:35 ACFD: positioning (SCSI LOCATE) is available for this device
    13:19:35 GLMT: returning "", code = 0x0
    13:19:35 VLBR: from chk_lm_tag: "", code = 0x0
    13:19:35 VLBR: tag on label just read: ""
    13:19:35 VLBR: master tag now ""
    13:19:35 RLE: noticed volume DC-ORCL-MF-000001, file 1, section 1, vltime 1346566310, vowner root, voltag
    13:19:35 RLE: qdb__noticed_se reports vol_oid 137, arch_oid 369
    (alv) backup image label is valid, file 4, section 1
    (ial) invalidate backup image label (was valid)
    13:19:35 RSMD: rewrote mount db for tape
    13:19:35 ULVI: set mh db volume id "DC-ORCL-MF-000001" (retid ""), volume oid 137, code 0
    13:19:35 ULTG: set mh db tag "" (retid "DC-ORCL-MF-000001"), volume oid 137, code 0
    13:19:35 CALE: created backup section oid list entry for oid 369
    13:19:35 PF: here's the label at the current position:
    Volume label:
    Intro time: Fri May 04 13:35:03 2012
    Volume UUID: d40ea6c6-d6c2-102f-bf51-da716418c062
    Volume ID: DC-ORCL-MF-000001
    Volume sequence: 1
    Volume set owner: root
    Volume set created: Sun Sep 02 11:56:50 2012
    Volume set closes: Sat Dec 01 11:56:50 2012 (no writes after this time)
    Volume set expires: Sat Mar 02 11:56:50 2013
    Media family: DC-ORCL-MF
    Original UUID: d40ea6c6-d6c2-102f-bf51-da716418c062
    Archive label:
    File number: 1
    File section: 1
    Owner: root
    Client host: client01
    Backup level: 0
    S/w compression: no
    Archive created: Sun Sep 02 11:56:50 2012
    Archive owner UUID: f32ac938-6410-102f-a3d5-b94c4468403b
    Owner class UUID: f32a3504-6410-102f-a3d5-b94c4468403b
    Encryption: off
    13:19:35 PF: at desired location
    13:19:35 BT: resid is 1
    13:19:35 ACFD: positioning (SCSI LOCATE) is available for this device
    13:19:35 ADMS: reset library tape selection state
    13:19:35 ADMS: reset complete
    13:19:35 GLMT: returning "", code = 0x0
    13:19:35 VLBR: from chk_lm_tag: "", code = 0x0
    13:19:35 VLBR: tag on label just read: ""
    13:19:35 VLBR: master tag now ""
    13:19:35 RLE: noticed volume DC-ORCL-MF-000001, file 1, section 1, vltime 1346566310, vowner root, voltag
    13:19:35 RLE: qdb__noticed_se reports vol_oid 137, arch_oid 369
    (alv) backup image label is not valid
    13:19:35 ULVI: set mh db volume id "DC-ORCL-MF-000001" (retid ""), volume oid 137, code 0
    13:19:35 ULTG: set mh db tag "" (retid "DC-ORCL-MF-000001"), volume oid 137, code 0
    13:19:35 CALE: found existing backup section oid list entry for oid 369
    13:19:35 ADMS: reset library tape selection state
    13:19:35 ADMS: reset complete
    13:19:35 RLE: read volume DC-ORCL-MF-000001, file 1, section 1, vltime 1346566310, vowner root, voltag
    13:19:35 RLE: qdb__read_se reports vol_oid 137, arch_oid 369
    (alv) backup image label is not valid
    13:19:35 ULVI: set mh db volume id "DC-ORCL-MF-000001" (retid ""), volume oid 137, code 0
    13:19:36 ULTG: set mh db tag "" (retid "DC-ORCL-MF-000001"), volume oid 137, code 0
    13:19:36 PTNI: positioning to "/wdn/testf" at 000000010003
    13:19:37 CNPC: data host reports this butype_info:
    13:19:37 CNPC: tar (attr 0x2C78: B_DIRECT, R_DIRECT, B_INCR, R_INCR, B_FH_DIR)
    13:19:37 CNPC: DIRECT = y
    13:19:37 CNPC: HISTORY = y
    13:19:37 CNPC: LEVEL = 0
    13:19:38 SNP: connection types supported by mover -
    13:19:38 tcp
    13:19:38 SNP: connection types supported by data service -
    13:19:38 tcp
    13:19:38 SNP: selected data connection type: tcp
    13:19:38 SNP: using separate data and tape/mover connections
    13:19:38 SNP: the NDMP protocol version for tape/mover is 4, for data is 4
    13:19:38 SNP: backup-server's NDMP tape/mover service session id is 7935
    13:19:38 RONPC: begin OSB NDMP data restore
    13:19:38 RONPC: need to restore from "/wdn/testf" tree:
    13:19:38 RONPC: tape position before restore is 000000010004
    13:19:38 MGS: ms.record_size 65536, ms.record_num 0x0, ms.bytes_moved 0x0
    13:19:38 RONPC: about to start restore; here are the environment variables:
    13:19:38 RONPC: env BEGINTREE=1
    13:19:38 RONPC: env NAME=/wdn/testf
    13:19:38 RONPC: env AS=/restore
    13:19:38 RONPC: env POSLEN=6
    13:19:38 RONPC: env POS=
    13:19:38 RONPC: env BLEVEL=0
    13:19:38 RONPC: env FIRSTCH=1
    13:19:38 RONPC: env POS_HERE=1
    13:19:38 RONPC: env EX2KTYPE=
    13:19:38 RONPC: env DATA_BLOCK_SIZE=64
    13:19:38 RONPC: env SKIP_RECORDS=3
    13:19:38 RONPC: env LABEL_VERSION=0000012
    13:19:38 SMW: setting NDMP mover window to offset 0x0, length 0xFFFFFFFFFFFFFFFF
    13:19:38 MLIS: mover listen ok for tcp connection; these addresses were reported:
    13:19:38 MLIS: 192.168.3.109:58303
    13:19:38 MLIS: 0.0.0.0:58303
    13:19:38 RONPC: tape fileno/blockno before restore are 0/0
    13:19:38 APNI: a preferred network interface does not apply to this connection
    13:19:38 DPNI: load balancing is in use, skipping default PNI
    13:19:38 RONPC: directing data service to connect to mover
    13:19:11 PPVL: obtar option OB_JOB = admin/81
    13:19:11 PPVL: obtar option OB_RB = 10.4
    13:19:11 PPVL: obtar option OB_EXTR = 1
    13:19:11 PPVL: obtar option OB_EXTRACT_ONCE = 1
    13:19:11 PPVL: obtar option OB_DEBUG = 1
    13:19:11 PPVL: obtar option OB_DEBUG = 1
    13:19:11 PPVL: obtar option OB_DEBUG = 1
    13:19:11 PPVL: obtar option OB_DEBUG = 1
    13:19:11 PPVL: obtar option OB_VERBOSE = 1
    13:19:11 PPVL: obtar option OB_CLIENT = client01
    13:19:11 PPVL: obtar option OB_HONOR_IN_USE_LOCK = 1
    13:19:11 PPVL: obtar option OB_STAT = 1
    13:19:11 PPVL: obtar option OB_VOLUME_LABEL = 1
    13:19:11 PPVL: obtar option OB_SKIP_CDFS = 1
    13:19:11 PPVL: obtar option OB_DEVICE = tape
    13:19:11 PPVL: obtar option OB_BLOCKING_FACTOR = 128
    13:19:11 PPVL: obtar option OB_VERIFY_ARCHIVE = no
    13:19:11 PPVL: obtar option OB_PQT = 134217728
    13:19:11 DSIN: 2GB+ files are supported, 2GB+ directories are supported
    13:19:11 SETC: identity is already root/root
    13:19:38 qtarndmp__ssl_setup: SSL has been disabled via the security policy
    13:19:38 RONPC: issuing NDMP_DATA_START_RECOVER
    13:19:43 RONPC: started NDMP restore
    13:19:43 MNPO: received NDMP_NOTIFY_DATA_READ, offset 0x0, length 0xFFFFFFFFFFFFFFFF
    13:19:43 MNPO: sent corresponding NDMP_MOVER_READ
    13:19:43 QTOS: received osb_stats message for job admin/81, kbytes 64, nfiles 0
    13:19:43 await_ndmp_event: sending progress update
    13:19:43 SPU: sending progress update
    /restore
    Error: Could not make file /restore: Is a directory
    13:19:44 MNPO: jumped over filemark fence
    13:19:44 VLBR: not at bot: 0x90000000
    13:19:44 VLBR: tag on label just read: ""
    13:19:44 QTOS: received osb_stats message for job admin/81, kbytes 51328, nfiles 0
    13:19:44 VLBR: master tag now ""
    13:19:44 RLE: noticed volume DC-ORCL-MF-000001, file 2, section 1, vltime 1346566310, vowner root, voltag
    13:19:44 RLE: qdb__noticed_se reports vol_oid 137, arch_oid 378
    (alv) backup image label is not valid
    13:19:45 ULVI: set mh db volume id "DC-ORCL-MF-000001" (retid ""), volume oid 137, code 0
    13:19:45 ULTG: set mh db tag "" (retid "DC-ORCL-MF-000001"), volume oid 137, code 0
    13:19:45 CALE: created backup section oid list entry for oid 378
    13:19:45 VLBR: setting last section flag for backup section oid 369
    13:19:45 MNPO: sent successful mover close
    13:19:45 MNPO: data service halted with reason=internal error
    13:19:45 SNPD: Data Service reported bytes processed 0x3220000
    13:19:45 SNPD: stopping NDMP data service (to transition to idle state)
    13:19:45 MNPO: mover halted with reason=connection closed
    13:19:45 MGS: ms.record_size 65536, ms.record_num 0x322, ms.bytes_moved 0x3220000
    Error: NDMP operation failed: unspecified error reported (see above)
    13:19:45 RONPC: finished NDMP restore with status 97
    13:19:45 RONPC: NDMP read-ahead positioned tape past filemark; backing up
    13:19:45 RONPC: We believe this because initial file # 0 isn't end file # 1
    13:19:45 RONPC: the section-relative block number at end of restore is 0x1
    13:19:45 RONPC: tape position after restore is 000003230080
    13:19:45 QREX: exit status upon entry is 97
    13:19:45 QREX: released reservation on tape drive tape
    13:19:45 RDB: reading volume record for oid 137
    13:19:45 RDB: reading section record for oid 369
    13:19:45 RDB: adding record for oid 369 (file 1, section 1) to section list
    13:19:45 RDB: reading section record for oid 378
    13:19:45 RDB: adding record for oid 378 (file 2, section 1) to section list
    13:19:45 RDB: reading section record for oid 380
    13:19:45 RDB: adding record for oid 380 (file 3, section 1) to section list
    13:19:45 RDB: file 1 has all 1 required sections; clearing incomplete backup flags
    13:19:45 RDB: reading section record for oid 369
    13:19:45 RDB: file 2 has all 1 required sections; clearing incomplete backup flags
    13:19:45 RDB: reading section record for oid 378
    13:19:45 RDB: file 3 has all 1 required sections; clearing incomplete backup flags
    13:19:45 RDB: reading section record for oid 380
    13:19:45 RDB: 1 volumes in volume list
    13:19:45 RDB: volume oid 137 reports first:last files of 1:3
    13:19:45 RDB: marking volume oid 137 as authoritative
    13:19:45 VMA: reading volume record for oid 137
    13:19:45 RLYX: exit status 97; checking allocs...
    13:19:45 RLYX: from mm__check_all: 1
    ob>
    Please help me to resolve the issue...
    Thanks,
    Sam

    If you're restoring a file you have to list it, so if you are restoring /wdn/file01 then you specify the alternate path as /restore/file01
    Thanks
    Rich

  • Metachain getting failed

    Hi Experts,
    I have searched  SDN, but couldn't find solution.
    I have a metachain with 16 local chains in it and it is getting failed as the 16th local chain is failed. And displaying messages as follows..
    19.05.2011     05:17:14     Job started     S     00     516
    19.05.2011     05:17:14     Step 001 started (program RSPROCESS, variant &0000000322282, user ID BW_USER)     S     00     550
    19.05.2011     05:17:14     Start process CHAIN ZSD_TRANSDATA_ZSD_C03 in run DAHJMTJ7J3D7NF590MGAWYCZ6 of chain PC_MASTER     S     RSPC     156
    19.05.2011     05:17:16     Error in remote call of destination SCD100     S     RSPC     51
    19.05.2011     05:17:16     Processes with Error     I     RSPC     22
    19.05.2011     05:17:16     Process did not report an instance -> no log     E     RSPC     57
    19.05.2011     05:17:16     Job cancelled after system exception ERROR_MESSAGE     A     00     564
    Please help me out to find a solution for this.
    Regards
    Arpita

    Error in remote call of destination SCD100
    SCD shoud be your source sys. Check if the connection between the source sys and BW is fine.

  • SAP job SAP_COLLECTOR_FOR_PERFMONITOR getting failed  with abap dump LOAD_PROGRAM_NOT_FOUND

    Dear Experts,
    Background job SAP_COLLECTOR_FOR_PERFMONITOR getting failed  with abap dump LOAD_PROGRAM_NOT_FOUND.
    As it is hourly scheduled job and it gets finished 22 times in a day but other 2 times fails with abap dump.
    Finished Job log
    Job started
    Step 001 started (program RSCOLL00, variant , user ID Bharath)
    Clean_Plan:Cleanup of DB13 Plannings
    Clean_Plan:started by RSDBPREV                       on server
    Clean_Plan:Cleaning up jobs of system DEV
    Clean_Plan:finished
    Job finished
    Failed Job Log
    Job started
    Step 001 started (program RSCOLL00, variant , user ID Bharath)
    Internal session terminated with a runtime error (see ST22).
    Kindly suggest on this..
    Thanks,
    Bharath.

    Dear Divyanshu,
    Our system in ERP 6.0 EHP5 with SP level 10. The ABAP Dump shows below error.
    |Short text                                                                                        |
    |    Program "RSORA811" not found.                                                                 |
    |What happened?                                                                                    |
    |    There are several possibilities:                                                              |
    |                                                                                                  |
    |    Error in the ABAP Application Program                                                         |
    |                                                                                                  |
    |    The current ABAP program "RSCOLL00" had to be terminated because it has                       |
    |    come across a statement that unfortunately cannot be executed.                                |
    |    or                                                                                            |
    |    Error in the SAP kernel.                                                                      |
    |                                                                                                  |
    |    The current ABAP "RSCOLL00" program had to be terminated because the                          |
    |    ABAP processor detected an internal system error.                                             |
    |What can you do?                                                                                  |
    |    Note down which actions and inputs caused the error.                                          |
    |                                                                                                  |
    |                                                                                                  |
    |    To process the problem further, contact you SAP system                                        |
    |    administrator.                                                                                |
    |                                                                                                  |
    |    Using Transaction ST22 for ABAP Dump Analysis, you can look                                   |
    |    at and manage termination messages, and you can also                                          |
    |    keep them for a long time.                                                                    |
    |Error analysis                                                                                    |
    |    On account of a branch in the program                                                         |
    |    (CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)                                              |
    |    or a transaction call, another ABAP/4 program                                                 |
    |    is to be loaded, namely "RSORA811".                                                           |
    |                                                                                                  |
    |    However, program "RSORA811" does not exist in the library.                                    |
    |                                                                                                  |
    |    Possible reasons:                                                                             |
    |    a) Wrong program name specified in an external PERFORM or                                     |
    |       SUBMIT or, when defining a new transaction, a new                                          |
    |       dialog module or a new function module.                                                    |
    |    b) Transport error                                                                            |
    |Information on where terminated                                                                   |
    |    Termination occurred in the ABAP program "RSCOLL00" - in                                      |
    |     "LOOP_AT_SYSTEMS_AND_REPORTS".                                                               |
    |    The main program was "RSCOLL00 ".                                                             |
    |                                                                                                  |
    |    In the source code you have the termination point in line 535                                 |
    |    of the (Include) program "RSCOLL00".                                                          |
    |    The program "RSCOLL00" was started as a background job.                                       |
    |    Job Name....... "SAP_COLLECTOR_FOR_PERFMONITOR"                                               |
    |    Job Initiator.. " bharath"                                                                       |
    |    Job Number..... 18243400
    Kindly check and suggest..
    Thanks,
    Bharath.

  • Report script execution is getting failed

    Hi ,
    We are facing one strange issue while executing the Essbase report script. I am new to the report script and I am not getting how to resolve the issue.
    When we are changing the year in code from FY13 to FY14 the script is getting failed however the same script is successfully generating the report if we keep year as FY13 in code.
    Could you please let me know where would be the problem , below is the part of the code form Report script.
    {MISSINGTEXT "0"}  // replace #Missing with 0
    <Link ((<LEV("Customer", "Lev0,Customer")) AND ( <IDESC("All Customers")))
    <Link ((<LEV("Product", "Lev0,Product")) AND ( <IDESC("All Products")))
    <Link ((<LEV("Period", "Lev0,Period")) AND ( <IDESC("YearTotal")))
    FY14

    Hi ,
    I am getting below error message.
    "Report Script execution Failed. Please see message panel for details " and in message panel It is not showing any details , just displaying Execute Report script Failed with date and time details.
    I also checked that FY14 do exist in the application and no duplicate FY14 member exist in the outline.
    Could you please suggest where would be the problem.

  • PO message should get failed for P.grp other than AB1 and AB2

    Hello SAP Gurus,
    I have a requirement like PO message should get failed for P.grp other than AB1 and AB2.
    Detail explanation:
    I have a P.grp AB1,AB2,AB3,AB4 etc.... The current process is once PO created and saved the message will be triggered and IDOC is transmitted to the vendor, irrespective of what ever the P.grp.
    My requirement is like the PO message should get failed if P.grp is other than AB1 and AB2, and reason should be shown any where in IDOC or in messages.
    Pls advice.
    Thanks.

    Hi Jurgen,
    Thanks for the reply...
    There are only 5 vendors which is relevant for EDI and P.grp AB1 and AB2 denotes EDI PO, same P.grp mapping has been done in PI also via data ID. The user sometimes selects the P.grp AB3, AB4 etc incorrectly and it goes to the vendor which in-turn again the customer has to amend the PO.
    Now I'm planning to include a piece of logic while saving the PO, check if the vendor is EDI vendor then P.grp should be AB1 or AB2, if it is a different P.grp  then the system will not allow to save the PO,so that the user will select the relevant P.grp for EDI vendors. Pls let me know your thought and inputs.
    Thanks.

  • Constantly getting Failed SMS messages inside my house.

    I have had issues with a couple cell phone making calls inside the walls of my house, but as of last week now I am getting failed SMS messages that say !Message Not Sent constantly, but yet a large chunk of them do go through. I have never had this issue previously.
    Is there anything I can do to fix this? Either with the phone, or something I should look for with the house? It's a brand new built house, so I wouldn't think it would have material in the house that stops them.

    Sounds like something changed the wireless signal strength at your home.  Did a new house get built blocking your reception from the tower?  Another structure?  Has Verizon been working on the towers in your area?  If you had a weak, marginal signal before, even the weather changing could cause problems.  I'd call Verizon and see if anything is happening to the network in your area.  They can also check to make sure your account is set up properly and that you have the latest PRL on your phone.

  • Upgrade Exchange 2010 SP2 to SP3 getting fail

    Hi,
    I am trying to upgrade from exchange 2010 SP2 to SP3, but it getting failed.
    I have already run the prepare schema, prepare and domain prep in all domains and it got replicated in DR Domain controllers.
    But, still i am not able to upgrade the server. The error says,
    Preparing Exchange Setup
        Copying Setup Files                           COMPLETED
    The following server roles will be upgraded
    Languages
    Hub Transport Role
    Client Access Role
    Management Tools
    Performing Microsoft Exchange Server Prerequisite Check
        Configuring Prerequisites                                 COMPLETED
        Organization Checks                                      
    FAILED
         Setup needs to contact the Active Directory schema master but this computer
     is not in the same Active Directory site as the schema master (Default-First-Si
    te-Name).
         Setup encountered a problem while validating the state of Active Directory:
     Exchange organization-level objects have been created but have not yet replicat
    ed to the local domain.  Wait for replication to complete and then run setup aga
    in.
        Language Pack Checks                                     
    COMPLETED
        Hub Transport Role Checks                                 FAILED
         Setup encountered a problem while validating the state of Active Directory:
     Exchange organization-level objects have been created but have not yet replicat
    ed to the local domain.  Wait for replication to complete and then run setup aga
    in.
        Client Access Role Checks                                 FAILED
         Setup encountered a problem while validating the state of Active Directory:
     Exchange organization-level objects have been created but have not yet replicat
    ed to the local domain.  Wait for replication to complete and then run setup aga
    in.
    The Exchange Server setup operation didn't complete. More details can be found
    in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
    Exchange Server setup encountered an error.
    Thanks,
    San

    Hi,
    Schema updates should be done on a schema master or on a DC in the same AD site as the schema master. Once extended, the updates will replicated via AD replication. To narrow down the issue, I recommend you check if there is any event related to replication
    on domain controller holding schema master role.
    Is the schema master role in the same site as the Exchange server which you want to upgrade? If not, you can try to transfer FSMO role to a domain controller which is in the site where you want to install Exchange 2010 SP3 and then upgrade to check the result.
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

Maybe you are looking for